Grabing images from camera & Apply OCR To that image

Hi,
I m developing a sample application on OCR. At last visit i m posting the same question.But no one can answer me.
Here i Create a Vi for grabbing images from camera. The Images are grab & save to the desired folder.But the OCR is not working on that snap image.
I m  modified some Sample NI VI's for capturing the images & for OCR.
I m new for labview. I cant understand where is the problem in the VI.
i also create a character set file for reading the characters using OCR Train
so please help me to find the solution.
Attachments:
Character reading.vi ‏91 KB

HI.
Let me give some suggestions regarding your code, (See pictures), and attached an example that you could serve.
Regards.
Jonathan Cruz
CHALLENGER
K U D O S __ B I E N V E N I D O S
Attachments:
Camara OCR.vi ‏42 KB
11.JPG ‏77 KB
22.JPG ‏17 KB

Similar Messages

  • How to capture a live image from camera & apply OCR on the captured image in labview 2011

    Hi, i m new to labview. i m doing a project on OCR . please help me to find the solution

    Hehe. What's wrong with seeing a little bit of the world?
    As for Grab, you won't get the correct resolution out of your footage that way. Even if you capture a full screen preview of your footage, your monitor resolution will either be higher, resulting in unnecessary upscaling, or lower, resulting in screen caps that are smaller than your footage resolution. If you export to an Image Sequence in Quicktime you can be sure that your images will be the exact same resolution as your footage.

  • Grabing images from & Apply OCR To that image

    Hi,
    I m developing a sample application on OCR. At last visit i m posting the same question.But no one can answer me.
    Here i Create a Vi for grabbing images from camera. The Images are grab & save to the desired folder.But the OCR is not working on that snap image.
    I m  modified some Sample NI VI's for capturing the images & for OCR.
    I m new for labview. I cant understand where is the problem in the VI.
    i also create a character set file for reading the characters using OCR Training.
    so please help me to find the solution.
    Attachments:
    Character reading.vi ‏91 KB

    HI.
    Let me give some suggestions regarding your code, (See pictures), and attached an example that you could serve.
    Regards.
    Jonathan Cruz
    CHALLENGER
    K U D O S __ B I E N V E N I D O S
    Attachments:
    Camara OCR.vi ‏42 KB
    11.JPG ‏77 KB
    22.JPG ‏17 KB

  • How do I tell iphoto NOT to load ALL images from camea and iphone, only new images?

    I've bee using my MacBook Pro, iphoto and Nikon for many years. I travel alot and take many pictures, and like to keep them on the memory cards as an extra backup. All was going great on a recent trip, until one day, suddenly, when I plug camera into computer, iphoto opens (as usual) but it starts downloading ALL of the old images on the memory card instead of just the ones that have not already been imported! It takes forever when you are using a 16GB card!! Is this due to some update I installed? How do I tell iphoto not to do this?! I only want to see images not yet imported, as it used to be. I am using OS X 10.6.8 and iphoto '09 - 8.1.2  And, this same thing is happening with my iphone, and my other camera.

    iPhoto does read all images (how else can it know if it has already imported them or not) and then gives your oppertunity to import new, all or selected
    Yes it does take a bit to get all images and see what needs to be imported - I use 32 GB cards - and the other issue is that if you delete impoprted photos next time you use the card the deleted ones will be in the new list so you have to select the rest and import selected - I've found no solution to this
    LN

  • How to delete lock screen photo image from camera while retaining the default images?

    Hi,
    I've recently took a picture using my camera and set it as a lock screen photo. However, I can't delete the custom lock screen photo after deleting my camera picture on my laptop. I would not know what will happen if I were to reset my entire system as I
    have two separate accounts; one of the accounts is not a Microsoft account. If i were to reset my computer system, some of the applications might not be there as the laptop had a custom setting when I bought it.
    How do I delete the cached photo in my computer?(The one without a Microsoft account)

    Hi,
    Do we have any backup available?
    If yes, we may consider to use system restore point to return to a state that could be able to change/delete the lock screen picture.
    Best regards
    Michael Shao
    TechNet Community Support

  • How do you Automatically Copy Images From Camera?

    I would like to create an AppleScript that will run when I plug in my digital camera. Here is what I cannot figure out.
    How to make it run when the camera is plugged in.
    How tow to copy images from camera to a designated folder.
    Thanks!

    You can do all you requested - without 'AppleScript'.
    01. Connect your camera launch 'Image Capture' ('/Applications/' folder - if it does not automatically launch.
    02. Select the 'Image Capture, Preferences...' menu item.
    03. Click on the 'General' tab.
    04. From the 'Camera:' 'When a camera is connected, open:' pop up menu - select the 'Image Capture.app' menu item.
    05. From the 'Devices' menu select your camera from the menu items list. A window will appear with the title of your camera.
    06. From the 'Download To:' pop up menu select where to save the camera's photographs. You can select any folder anywhere on your hard disk drive(s).
    07. Click the 'Options...' button, and from the drop down sheet click on the 'Connection Options' 'Automatically download all items' check box - to add a check mark. There are other options you may have be interested in.
    08. Click on the 'OK' button.
    09. If you want to download the photographs now - click on the window's 'Download All' button. Or, to test the above setting changes - quit 'Image Capture' and disconnect your camera. Then reconnect the camera - and watch the above setting changes take effect.
    Note:
    The above automatic action can also happen if the storage device of the camera were inserted into a USB digital camera card reader. So long as apply the Steps above, and you select the USB digital camera card reader from the 'Devices' menu's menu item list in Step 05 above.
    'Image Capture' is not scriptable; but, may be control-able via 'tell application "System Events" to tell process "Image Capture" ....
    When a camera is connect to the Mac, the storage card of the camera is mounted onto the 'Desktop' and also listed, as an alias, in the (invisible) '/Volumes/' folder.
    Now that you know the name of the storage card ... you can create a 'Folder Action Script' (an example is presented below) and save it into the '/Library/Script/Folder Action Scripts/' folder,
    Open the '/Volumes./' folder (in 'Finder' via 'Go, Go to Folder' - enter '/Volumes/').
    Perform a right button click ('<control> - click, for single button users) on the 'Volumes' folder's window, and select 'Enable Folder Actions' (if not already).
    Rpeat the right button click (<control> click) and select 'Attach a Folder Action...' - selecting your script ('Volumes_FAS.scpt' as shown below).
    Below is a 'Folder Action Script' example - where you will have to substitute 'NO NAME' with the name of your digital camera's storage card's name.
    -- --- Save code as a script with the name 'Volumes_FAS.scpt' --- --
    on adding folder items to this_folder after receiving added_items
    set myStorageCard to "NO NAME" -- The name of my 1 GB stroage card. The name of your card may differ.
    repeat with i in added_items
    tell application "Finder" to set tName to (name of i) as string -- Obtain name of mounted storage card.
    if (tName is equal to myStorageCard) then my handle_card(i) -- If my storage card, continue processing.
    end repeat
    end adding folder items to
    on handlecard(localVolume)
    set folder_Path to ((path to desktop folder from user domain) as string) -- Path to 'Desktop' folder.
    set download_Folder to "NO_NAME Photographs" -- Name of folder to store storage card's items (files and folders).
    -- create download_Folder, if it does not exists.
    tell application "Finder" to if (not (exists folder (folder_Path & download_Folder))) then make new folder at (folder_Path as alias) with properties {name:download_Folder}
    -- Duplicate all the items (files and folders) of the storage device to the '~/Desktop/NO_NAME Photographs' folder.
    tell application "Finder" to duplicate items of local_Volume to (folder_Path & download_Folder) as alias
    end handle_card
    -- --- End of code --- --
    Review 'Finder's dictionary (in 'Script Editor') for the various ways to incorporate 'duplicate ...'.
      Mac OS X (10.4.4)  

  • How receive image from camera with PCI-bus

    Hello all
    Please help
    me.
    I have LV 7.1.1.
    I wont
    watch two and more images from cameras at the same time.
    I have capture
    card (PCI-bus) with 4 video-input.
    What kind
    of data must be transfered from this capture card  to LV?
     With respect
    Aleksandr.

    Hello Aleksandr
    please provide more information, what type of video card do you have?
    Have you configure the card so you can watch an image with MAX?
    I suppose the card has the ability to capture more than one image at a time is that true?, however most of the cards that I know of, have several inputs but you can only display one image at a time, you can swith between them and capture and image from another input, to capture more than one unit at a time you would need to open/close sessions with the instrument/card such that you are switching from one input to another
    vicente

  • HT4101 I discovered a fatal flaw in the iPad procedure for downloading images from camera to iPad: after selecting the images to be downloaded, an accidental touch of the "delete" button, wipes all selected images from the camera, with no warning?

    After downloading some 60 images from camera to iPad, I was "scrolling" down to select the last images, and inadvertently touched the "Delete" button that appears at the top right of the screen, when the "Select" option is chosen. I did not notice the warning "Delete 60 Images?", and continued scrolling down, when my finger touched the warning message. All my precious images were instantly deleted from the camera The sensitive touch screen feature makes this a real problem. Apple should "fix" this unacceptable feature, surely! I suggest that the images on the camera memory card should not be able to be deleted from the iPad, and this shpuld require to be done using the camera controls only. Similarly, the "Delete" or "Keep" options that appear after importing a selection from the camera, should NOT allow the images on rthe camera to be deleted, but only the imported (downloaded) images on the iPad. This unnecessary option could easily delete precious images from the camera!
    Apple should remove the option to delete images from the camera, and the iPad touch screen commands should olny delete images on the iPad. (Alternatively, the "delete option should be on a separatly accessed "page".)
    Surely enough users of the "Lightning to USB Camera Adapter" will agree with the above?

    No, I don't agree. Whenever you connect a camera to a computer you are given the opportunity to delete the photos on the camera after downloading in precisely the same way the iPad does this. The fact that you touched Delete and then ignored the Warning doesn't change anything.
    I've loaded thousands of photos on my IPad and never have had that problem.
    Don't blame a moment of carelessness on your device.
    If you want to make such a suggestion to Apple use http://apple.com/feedback

  • Camera software not opening to transfer images from camera to computer. What to do?

    My PowerShot 720is software ZoomBrowser EX not opening on computer. No images load and I don't have option to click on "connect to camera" so I can transfer images from camera to computer. Message says "Zb Module has stopped working. Windows is looking for a solution to this problem." Anyone have this happen and know what to do?
    Thank you!

    Hi BLG,
    If you haven't already done so, please update your software for Windows 7.  Here's how.
    Just click here to access the software updates for your camera.  Once there, just enter your operating system, then the version of the operating system.  Now click on "Software" to show the software updates.
    Click on "ZoomBrowser EX 6.9.0a Updater".  Installation instructions are on the next page.  Also, please download "CameraWindow "DC 8.8 for Windows" to your desktop.
    After accepting the required disclaimer, please download the program update to your desktop.
    After downloading all the software you choose to install, please install ZoomBrowser last. This will allow it to link to the other Canon software on your computer.
    Since you've installed an older version of software, you may now double-click on the program update to install it.  If not, just put the CD-ROM in your computer's optical drive and stop any installation program that starts.
    If you've already updated the software for Windows 7, please contact us for assistance.  Click here for contact options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How do i delete images from camera after importing

    how do i delete images from camera, ipad, iphone after importing the files into aperture3?

    Image capture will allow you to delete from the device after import, but I believe it is by design that Aperture does not do this as it is recommended (in the case of a camera) to use a device's own delete function rather than a 3rd party like Aperture. This also allows time for a proper backup before everything is erased from the device?

  • Capturing images from camera and uploading to sharepoint library automatically.

    Hello Everyone,
    My requirement is to capturing images from camera and uploading to sharepoint library automatically. No manual uploading will take place.
    Please suggest me.
    Thanks,
    Rajesh

    Hi,
    From your description, my understanding is that you want to capturing images from camera and uploading to sharepoint library automatically automatically upload images to SharePoint library.
    You will save images in your local computer after capturing visitors’ image. You could develop a custom timer job to periodically get pictures from the local folder in your computer. Please refer to this article:
    Create and Deploy Custom Timer Job Definition in SharePoint Programatically
    http://www.codeproject.com/Tips/634208/Create-and-Deploy-Custom-Timer-Job-Definition-in-S
    you could upload pictures to your SharePoint from the folder with C# code, please refer to this article:
    How to: Upload a File to a SharePoint Site from a Local Folder
    https://msdn.microsoft.com/en-us/library/office/ms454491%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
    Best Regards,
    Vincent Han
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Capture images from Camera directly at high resolution

    Hello Users,
    I want to capture images from Camera directly at high
    resolution. The problem is that although I am able to capture
    images from a Video Object, but the images are small because the
    Video size is only 160x120. So if I am able to capture directly
    from Camera, I am sure to get a higher resolution images at which
    the camera is capturing.
    Any help in this matter will be of great help

    Hello Users,
    I want to capture images from Camera directly at high
    resolution. The problem is that although I am able to capture
    images from a Video Object, but the images are small because the
    Video size is only 160x120. So if I am able to capture directly
    from Camera, I am sure to get a higher resolution images at which
    the camera is capturing.
    Any help in this matter will be of great help

  • Why can't I import raw images from camera to lightroom 5.7.1?

    why can't I import raw images from camera to lightroom 5.7.1?

    You can visit the Lightroom Journal to see the new features of LR6/CC, including new cameras supported in this release:
    Lightroom Journal | Tips and advice straight from the Lightroom team.
    And yes, as DJ confirmed, the Nikon D7200 is listed.
    The the full list of supported cameras is here (Lightroom and Camera Raw have compatible engines and identical support):
    Camera Raw plug-in | Supported cameras
    Mike

  • Successfully mirrored images from ipad to TV but lost images on ipad

    successfully mirrored images from ipad to TV but lost images on ipad.  Can anyone help?

    Restart you iPad http://support.apple.com/kb/HT1430
    Restart your Apple TV http://support.apple.com/kb/HT3180
    Make sure AirPlay Mirroring is enabled http://support.apple.com/kb/HT5209

  • Issue with exporting the image from camera and scanner

    Hello,
    When  importing JPG digital photos from my Conica Minolta SLR digital camera,  the file size is typically 3-4 megabytes. If importing
    and then  exporting the file out of Lightroom 2.6, the size of the file is not  changed (at least not very much).
    However, when scanning 35 mm color negative films using a  Plustek OpticFilm 7600i with SilverFast-SE the JPG file has a size of  abou
    t 5 megabytes (generated by SilverFast-SE). If I take this file  and import it to Lightroom and then export it out again, the size in
    crements to about 12 megabytes. What could be the reason for this?
    Browser:  Microsoft IE
    Operating System: Windows 7
    Scanner / driver  version: SilverFast-SE v6.6.0r6
    Has it ever worked? If so, what's  changed? (provide comments in description field): Not Applicable
    Same results with different file?: Not Applicable
    Same results with  different computer?: Not Applicable
    Recent System Hardware or  Software change?: Not Applicable
    Regards
    JPSingh

    It is the compression settings on export that will define the size of an exported image from LR, the amount of compression applied will produce differing file sizes according to the type of image, the amount of sharpening and many other factors.. To compare actual file sizes (rather than compressed sizes) see what it says when in Lightroom or when open in Photoshop. Two images with the same pixel dimension can have very different file sizes when compressed. When open, in PS for instance, the file size will be the same for images of the same pixel dimensions and bit depth. .

Maybe you are looking for