Gracefully shutting down mgcp gateway for upgrade

I need to disconnect (force failover) of calls on a gateway, so that we can upgrade the router. Any thoughts on if and what the potential syntax or procedure (CCM) might be? Thanks.

Configure this command in the Gateway - call application alternate DEFAULT

Similar Messages

Photoshop CS6 shut down after using for 5mins; no image can be display on canvas.

Photoshop CS6 shut down after using for 5mins; no image can display on canvas.

Thanks for your help. Actually the problem was solved when turning off the GPU. In the mean time, I would like to upgrade my Video Card, too. My existing vedio card detials are as below. May I seek your advice on any good method other than replace it.

Do we have an procedure to gracefully shut down the MDS-9513?

Hello All
Do we have an procedure to gracefully shut down the MDS-9513?
Please advise
Thanks
Chetan

Hi Chetan,
There is no separate command required on MDS switches for a graceful
shutdown of the MDS switches.
Disengage the power or down the power source feeding the MDS to
shutdown the switch.
The MDS has enough RAM memory and does not require any fschk when it
will power back UP unlike other vendor switches. The MDS is architected
that way.
As a prudence you can take these measures:
1) Halt I/O or gracefully shutdown the attached servers and hosts
2) After your servers have been halted, follow the shutdown procedures
for all attached storage devices
3) Other tips to keep in mind if you were running HP-UX or AIX onyour
servers. In this case, you would want to make sure that you have turned
on static
domains and persistent FCIDs prior to powering these servers down (this
would insure that hosts and associated storage come back up with the
same domains and FCIDs.
4) Save your switch configuration by doing "copy run start" as well as
save your configuration externally to a FTP/TFTP server in case you need
to restore that back.
After all devices have been shutdown/quiesced, it is okay to simply
power off the MDS switches.
Best regards,
Jim

I-Mac shuts down after sitting for a while, why and how can it be fixed?

i Mac shuts down when left for a time in sleep mode. Am I missing something or is this supposed to happen?
It has never happened while anyone is using the computer but that may just be because it often sits over night without use.
Am using a logitech Wave USB keyboard and mouse because my wife likes it.

OK reset the SMC > http://support.apple.com/kb/HT3964
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Press and hold the power button for 5 seconds.
4. Release the power button.
5. Attach the computers power cable.
6. Press the power button to turn on the computer.
and check all of the power connections.
The iMac's are sensitive to power issues (sag or momentary outage) while in sleep mode. If in the Energy Saver preference "Start up automatically after a power failure" is unchecked (as it should be) then you could/would/should find the iMac off after a power problem.

I just got my shipment and My Ipad mini is just shut down without reasons during upgrading. I'm doing restore it. Does it matter for the future use?

I just got my shipment and My Ipad mini is just shut down without any reason during upgrading. I'm doing restore it. Does it matter for the future use?
ACtually I really really don't want to use it anymore. I'm so disappointed.

PolishAngel756 wrote:
Some friends have told me that their phone can last up to 2 days without charging??
If they are getting 2 days without charging, it's unlikely they use their device very much.
A full day is pretty good....and if I'm careful, I can easily get a full day of usage.
For me, normal is charging the iPhone mid afternoon at work, but I use it a lot.
My typical usage is 35 mins of listening to podcasts, checking email, checking my RSS feed, and checking a few apps while I ride my bike when I first get up. Then listening to several podcasts at work.
I typically stream music while working out during my lunch hour and use the Men's Health Fitness app to track my progress.
By about 2pm I'm ready to charge the device as it's getting low (somewhere between 20% and 50%).
I leave bluetooth, Wi-FI, and location services turned on all the time.
Personally, I just do not see the point in going into settings to turn on the feature when I need it... just too much hassle. All of my listening to podcasts and music is via Bluetooth.
I know I'm not the heaviest user, but I just do not see how anyone can realistically make it two days on a single charge, it makes me think they simply do not use the features of the device and would be just as well served with a basic or feature phone.

I did an upgrade from 4.0 to the new 6.0 about 5 months ago. After the upgrade installed it said reboot system to apply upgrade. Now it wont open and keeps telling me that the older version needs to shut down the computer and upgrade the old version.

Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???

Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???

IMac shuts down when trying to upgrade from Tiger to Leopard

My iMac, purchased in November of '07, came installed with Tiger but also came with a Leopard OS update disk. When trying to upgrade to Leopard last week, every time I rebooted off the disk the computer would run for a minute in the gray screen and then suddenly shut off with no warning message. I checked HD in disk utilities, repaired my permissions and tried again with the same results. I've got 30 gigs of free space and 4 gigs of RAM which should be plenty. I talked to Apple support who walked me through the installation procedure with the same results and ended up shipping me a new install disk which came today. I am getting the same shut down on reboot with their replacement disk. Apple actually sent me two white disks. The first is labeled "For Mac Computers, Mac OSX Install disc 1" The second is labeled "MacBook, Mac OSX Install Disc 2" Since the second disc is label "MacBook" is it possible they sent me the wrong set of discs?
Thanks

rk87,
Thanks for replying. I have a 500 gig hard drive which yields a 465gig usable capacity, so, at 30 Gigs available, I don't have 10% of the drive free. This may be an issue, but my more immediate problem is that I can't get the install disk to boot up at all.
I called apple support again see what I could find out about the install disks which wouldn't work. The support guy seemed like he had a lot of knowledge about the system and suggested trying the Tiger install disk (that came with the machine) to see if it would boot up, which it did. After that success, I tried the Leopard update disk in another iMac I have at home and it worked as it should. Since the disk worked fine on the other mac, the guy at tech support speculated that there is some sort of hardware issue causing the install shut down on the computer in question.
His speculation was about the memory installed in the machine which might be the issue. I had bought the computer from an Apple Authorized store here in town who upgraded the RAM to 4GIGs using third-party memory. Even though the memory seems to have functioned properly for the past year, apple support says that there could be some sort of incompatibility with the third party product causing the install disk not to work.
Apple support told me about running a memory diagnostic off of the Tiger install disk by rebooting with the disk in the computer and hold down the "D" key. After I got off the phone I ran the test which turned out to take an hour in its long version. The test indicated no problems, but apple had told me that it might not be totally conclusive. At this point, I'm taking the computer back to the store where I bought it and will let them figure it out.

MacBookPro shutting down at error since upgrade

Since I upgraded to Mountain Lion yesterday my system shuts down and restarts when it comes across minor errors, such as non-responding app that take a while to unfreeze - esp if I am on VPN remote for my work. This never happened before. It gives no warning, the screen goes black and the computer restarts.I do not get to save anything I am working at the time it happens, so it's very aggrevating.
I am thinking it has to do with the upgrade to Mountain Lion.
I might be wrong, of course.
Anyone know why this is happening? And how should I prevent it?
I have a MacBookPro 2.4 GHz Intel Core 2 Duo, 4GB 1067 Mhx DDR2, OSX 10.8 Mountain Lion.
I hadly have anything on my laptop, I store everything from music to photos to documents in my external HD, as not to bog down my laptop.
Any help/insight would be appreciated.
Thank you!
M.

I haven't had this problem until recently and I recently calibrated my battery.
Look at your system logs in your Console application for any clues.
Looking at it logically though, I would say it's a battery issue seeing it was working fine before calibration, and it doesn't shutdown on the AC adapter.
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
  Mac611 Mobile Mac Support - about.Mac611.com
   iTunes:MacOSG Podcast | YouTube.MacOSG.com
                   An Apple User Group 
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

Can't shut down / restart after Leopard upgrade - can't install updates

(While I found a topic with the same subject from last November, which is marked "answered", as far as my machine is concerned, nothing in that thread helps)
Having upgraded to Leopard, I have found that the regular shutdown process never works. I invariably get told that Firefox (or something else) is still running but not only is the "Force Quit" dialog empty, but a "ps aux" command does not list any process related to Firefox in it.
For the last few months, I've been doing shutdown -h now, the only mechanism that would work.
However, there's a new update which has a button to restart, but it WON"T restart. I just get the usual problems as above. If I do a shutdown -r now, I can reboot, but it looks like the software update did not actually happen, as I simply get prompted again to install/restart.
Anyone know how to really solve this problem?

Well, it turns out that I was wrong about the original thread not helping. As a last act of a desperate user, I went to the place in user accounts where the login items are specified and pulled out EVERYTHING except my microsoft keyboard/mouse drivers (don't laugh...the only thing I hate about Macs are their keyboards and mice) and my system is now working perfectly...shuts down properly every time, etc...the updater was able to do its job.
I have absolutely no idea which item caused the problem and I don't care.
It works!

MBA 2013 shut down without reason after upgrade MAVERICKS

Hi there ,
I have a new MBA 2013 , till the upgrade to Mavericks (for free) no worries , but today after the upgrade he shutted down unexpectedly twice !!! What's happening here ? Am I the only one having this kind of issue?
HELP ME
THX by advance
Raph from Brussels

nana4design,
some 15-inch Mid 2010 MacBook Pros are known to have a defective NVIDIA GPU. Since you’re getting GPU panics, yours might be one with the defect. Apple had a gratis servicing program for this model’s defect that lasted for three years from the date of the MacBook Pro’s purchase; they still offer the servicing program, but it is no longer guaranteed to be gratis. I’d recommend making an appointment at your nearest Apple store, to have them run their Video System Test on your MacBook Pro to confirm whether or not its NVIDIA GPU has this defect.

System sleep and shut down not working after upgrade to windows 10

HiI upgraded my OS from win 8.1 to win 10.After the upgrades the system shutdown and sleep are not working properly.It's like when I shutdown/sleep the system ,the screen shuts down but the power key keeps glowing and also the battery keeps draining.So eachtime I have to foercefully press the power button to shutdown the system. I have updated the display driver . Please someone suggest, what to do ?

Hi there , Thank you for visiting the HP Support Forums and Welcome! I read your post on the HP Support Forums and seen that you are having issues with your HP Pavilion 15-n260tx Notebook PC and the Sleep/Shut down options. It sounds like you might be having an issue with one of the features of Windows called Hybrid Shutdown that is used for the Fast Startup feature. Here are a couple of links for you about Fast Startup, Hybrid Shutdown and How to Shut down your Notebook completely. They also have some troubleshooting steps in them. 1. Fast Startup - Turn On or Off in Windows 10.2. Shut Down Computer in Windows 10. If those do not work, I do have some more documentation for you to read and try. 1. Shut down (turn off), sleep, or hibernate your PC - This document is from Microsoft. 2. HP Notebook PCs - Managing Power Options (Windows 8)3. HP PCs - Sleep and Hibernate Issues (Windows 10, 8) Sometimes a BIOS Update will work. You can update all of your drivers by going to the HP Driver's website or by using the HP Support Assistant. On the Driver's page there is not an update for the Windows 10 Column, but there was an update that just came out under Windows 8.1 on Aug 7, 2015 that should work for your Notebook. Another fix that may work is to Run the Troubleshooter. Please follow this link to run the Windows Update Troubleshooter. I hope this helps! Have a great day!

Photoshop Elements 12 Editor Shuts Down Without Saving for Web

Hi
I have a mac version of Photoshop Elements 12 Editor. I have been using the products for a few months with no problems until recently when I try to save for web (after the preview is shown), the program will shut down by itself when I click the "Save" button.
Mac version OS X 10.9.5

Oh, and while you're in there delete:
com.adobe.PhotoshopElements.plist
Adobe Photoshop Elements 12 paths
Adobe Photoshop Elements 12 settings
There's a saved application states folder at the same level as the Preferences folder. Delete anything in there for PSE.

Several Apps seem to just mysteriously shut down after using for a while. Same with Safari, I will be using Safari and it shuts down. Face book too. I've reset and shut down my iPad 3 and restart it, but it stills shuts down. What to do?

Several Apps seem to mysteriously shut down after using them for a while. Face Book shuts down , netflix, Safari, and other Apps. They work fine for a short while, or a long while, and then shut down and it brings me to my regular desktop screen. I've tried restarting by completely shutting down the IPad until I see the apple pic and turned it back on, but the shutdowns of apps continue. Anyone else have this issue? It generally started shortly after downloading and installing IOS 7......

Hi jennyoutwest,
Welcome to the Support Communities!
The following articles will provide some troubleshooting steps for your iPhone.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If that does not resolve the issue, refer to page 146 in the iPhone User Guide to Reset All Settings:
iPhone User Guide for iOS 7
manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
The final troubleshooting step would be to restore your device:
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition. Before restoring:
Verify that you are using the latest version of iTunes.
Back up your device.
Transfer and sync content to your computer.
Cheers,
- Judy

My Mail app opens unprompted everytime i reboot or awake my macbook pro from sleep. This was not an issue until i shut down my laptop for the first time in a while 2 days ago. ANy ideas how to stop this?

I recently shut down my MacBook Pro for the first time in a long time. SInce then, everytime i reboot or awake my laptop from sleep, the Mail app opens unprompted causing my computer to slow down incredibly, and some apps to freeze. I have no idea how to stop this or why it even started doing this. Any ideas on how to get it to stop? Thanks!

I have this problem too with my Macbook Air. Mail opens automatically every time my laptop sleeps. I actually just asked about this in my own thread. However, it is not causing my apps to freeze.

Kernal panic preventing shut down after Mountain Lion upgrade

Following upgrade to Mountain Lion, kernal panics are stopping shut down of my Mac from the apple menu. I have a late-2009 Mac Mini. OS X closes as normal but then restarts with message "Your computer restarted because of a problem". I have performed disk verfication, repaired permissions, reset VRAM and SMC. Booting from original hardware disc allows a normal shut down, so I suspect this is software related (probably Mountain Lion?). Kernal panic report from Console is below.
Reading this https://discussions.apple.com/thread/4135480?start=30&tstart=0 suggests problems with nvidia cards and Mountain Lion. My Mac Mini has the original nvidia card it shipped with (9600M) and if I disconnect the display just before shut down it (usually) seems to shut down normally so might be display related?
Other than the problem with shutting down everything is working normally. First instance of this problem was immediately after installing Mountain Lion. I am currently considering a full-reinstall of Mountain Lion from the recovery partition and using Time Machine to retrieve my settings etc, although I am concerned this will not work if it is a genuine bug.
Any assistance or solutions gratefully received!
Kernal Panic report:
Sat Jul 28 18:05:37 2012
panic(cpu 0 caller 0xffffff801ceb7b95): Kernel trap at 0xffffff801cec3dd0, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff8095537a20, CR3: 0x000000001f97b000, CR4: 0x0000000000000660
RAX: 0xffffff8081715100, RBX: 0x0000000000110000, RCX: 0x0000000000000440, RDX: 0x0000000000000040
RSP: 0xffffff80956dbea0, RBP: 0xffffff80956dbf20, RSI: 0x0000000000000440, RDI: 0xffffff8095537a20
R8: 0x0000000000110000, R9: 0x00000000000000ff, R10: 0x0000000000000000, R11: 0x0000000000000040
R12: 0x00000000954eac72, R13: 0x000000000000ac00, R14: 0x0000000000000000, R15: 0xffffff801d336430
RFL: 0x0000000000010002, RIP: 0xffffff801cec3dd0, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff8095537a20, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80956dbb40 : 0xffffff801ce1d5f6
0xffffff80956dbbb0 : 0xffffff801ceb7b95
0xffffff80956dbd80 : 0xffffff801cece4ad
0xffffff80956dbda0 : 0xffffff801cec3dd0
0xffffff80956dbf20 : 0xffffff801cec4135
0xffffff80956dbf60 : 0xffffff801ce3dcae
0xffffff80956dbfb0 : 0xffffff801ceb2677
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide:     0x000000001cc00000
Kernel text base: 0xffffff801ce00000
System model name: Macmini3,1 (Mac-F22C86C8)
System uptime in nanoseconds: 671825824236
last loaded kext at 34899759788: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0xffffff7f9ec32000, size 36864)
last unloaded kext at 190440926342: com.apple.driver.PioneerSuperDrive          3.1.0 (addr 0xffffff7f9eabc000, size 12288)
loaded kexts:
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleBluetoothMultitouch          75.15
com.apple.driver.AudioAUUC          1.60
com.apple.driver.ApplePlatformEnabler          2.0.5d4
com.apple.driver.AGPM          100.12.69
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleHDA          2.3.0f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f8
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.GeForce          8.0.0
com.apple.driver.AppleIRController          320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.0
com.apple.driver.AirPortBrcm43224          600.36.17
com.apple.driver.AppleFWOHCI          4.9.5
com.apple.driver.AppleAHCIPort          2.4.0
com.apple.nvenet          2.0.19
com.apple.driver.AppleUSBHub          5.1.6
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleUSBEHCI          5.1.5
com.apple.driver.AppleUSBOHCI          5.1.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.AppleBluetoothHIDKeyboard          165.5
com.apple.driver.AppleHIDKeyboard          165.5
com.apple.driver.IOBluetoothHIDDriver          4.0.9f8
com.apple.driver.AppleMultitouchDriver          235.27
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.3.0f2
com.apple.iokit.IOAudioFamily          1.8.9fc9
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f8
com.apple.iokit.IOSurface          86.0.2
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOBluetoothFamily          4.0.9f8
com.apple.driver.AppleGraphicsControl          3.2.6
com.apple.driver.AppleHDAController          2.3.0f2
com.apple.iokit.IOHDAFamily          2.3.0f2
com.apple.driver.AppleSMC          3.1.3d11
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.nvidia.nv50hal          8.0.0
com.apple.NVDAResman          8.0.0
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOUSBMassStorageClass          3.5.0
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.2.0
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IOUSBFamily          5.1.6
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0

Hello hotdavesweet,
It sounds like you have exactly the same problem as I have - nothing connected except the TV, permissions repaired, PRAM reset, etc.
Are you using Mountain Lion?? I had to downgrade to Lion to solve it. Unfortunately, a very similar problem occurs with the latest version of Lion (10.7.5). I'm sure that something with the latest updates is causing problems on certain Macs. I've filed a bug report with Apple so it may help if you do the same.
It could be a problem with using Samsung LCD TVs as monitors. Or maybe a graphics card issue - the user in this discussion: https://discussions.apple.com/thread/4316892?start=15&tstart=0 noted that a similar problem on a 2009 Mac Pro was caused by their (nvidia) graphics card driver.
Either way, I think it is something that Apple should address, even if it is only affecting a few users. Apple's mantra used to be that everything just works, but now I cannot upgrade to Mountain Lion with my setup (despite my Mac being easily capable of running it) and nor can I upgrade to Lion 10.7.5. It doesn't work as it should.

Gracefully shutting down mgcp gateway for upgrade

Similar Messages

Maybe you are looking for