Gracenote does not recognize mix CD after submitting to CDDB 1 week prior

Please help. I am trying to submit a mix/compilation CD of some of my personal favorite indie bands to Gracenote. I entered all the required information and when submitted, it says, Thanks for submitting to Gracenote. Gracenote.com says it can take up to 48 hours. however, it's been over a week and still not recognized when inserting into another computer.
The files are MP3, however I am burning the CD as an AUDIO CD.

You did select the audio CD and make sure the names were correct on that, right?

Similar Messages

  • Yosemite does not recognize HP printer after upgrade.  I can print from my iPhone, but not my 13" Macbook Air (2013)Yosemite does not recognize HP printer after upgrade.  I can print from my iPhone, but not my 13" Macbook Air (2013)

    Yosemite does not recognize HP printer after upgrade.  I can print from my iPhone, but not my 13" Macbook Air (2013)
    Are others having the same problems?

    Try this. Worked for me.
    - turn off your router
    - turn off you Mac's after removing all available printers
    - turn off all iDevices
    - do a factory reset of your printer remove all cables min. 30 sec.
    - turn on your router first
    - ran the network set up wizard
    - give your printer also a new name like "DeskJet 2015"
       Something which you don't have used before.
    - turn on your Mac's and add your printer
    - turn on your iDevices at least.
    Should work after these steps.
    It worked for me including all iDevices.
    iOS and Yosemite

  • Itunes does not recognize my device after ios8 update

    Why does iTunes does not recognize my device after iOS8 update and what can I do to resolve this.
    I am getting a "plug-into-Itunes-logo" screen on my iPad. Thx!

    Hi there janis831,
    It sounds like your device may be stuck in Recovery Mode. Take a look at the article below for how to restore your device.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    -Griff W.

  • Itunes does not recognize IPAD 3 after upgrading to IOS 6.

    After updating my IPAD 3 to IOS 6, Itunes does not recognize my IPAD 3.  What can I do to fix this issue?

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • Itunes does not recognize my Ipad after software update. says it is in recovery mode, Itunes does not recognize my Ipad after software update.

    After an ipad software update, it does not recognize my Ipad in Itunes.  Gives error 14. what to do?

    You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad.
    If you haven't synced to a computer them (from here) :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • I tunes does not recognize i touch after trying to upgrade software

    My itouch was working fine until an error occured while trying to upgrade the software. Now, when i plug it in it just shows me a picture telling me to connect to itunes, and i tunes does not recognize my ipod as being connected. i can not get the ipod to even go into the main menu

    Of course iTunes won't recognize an iTouch. That's not an apple iPod. Are you thinking of the iPod touch?
    Hah, I'm just kidding. For your issue here, I suggest a few things
    -Restart your computer
    -Make sure you have the latest version of iTunes by going to 'help' and then 'check for updates
    -Try another USB cord
    -Try another USB port and make sure your USB drivers are installed correctly and up to date (http://support.apple.com/kb/TS1538)
    -Restart the Apple Mobile Device Service (http://support.apple.com/kb/TS1567)
    -Uninstall iTunes and reinstall (http://support.apple.com/kb/HT1925)
    Those steps should fix everything up for you but if they don't, be sure to try it on a different computer.
    Hope I helped
    Becca

  • ITunes does not recognize my Iphone after I tried to unlock it

    I tried to unlock my iPhone with redsnow but smth went wrong and now it sais conect to iTunes, but iTunes does not recognize it. iPhone is stuck in conect to iTunes picture.

    Under the Terms of Use of this forum it is prohibited to discuss jail breaking. By jail breaking your iPhone you void any warranty you may have, forfeit any support from this forum, leave your iPhone vulnerable to malware and risk bricking your iPhone should you attempt future software updates or restoring your iPhone - http://support.apple.com/kb/HT3743.

  • Safari Installer Does Not Recognize Mac OSX After 10.5.5 Update

    I have been trying to reinstall Safari on my Mac, and after downloading the installer it says that my hard drives does not contain OSX and cannot be installed. This is after I did the OSX 10.5.5 update. I know I can reinstall from the OS disc but it is a hassle really.

    Hello,
    Sounds like your Software Updater is confused. Locate this file: com.apple.softwareupdate.plist
    /Users/YourName/Library/Preferences. Drag that file from the Preferences folder to the Trash, empty the Trash and reboot. Try Software Update now.
    Also, whenever you do an update like 10.5.4 to 10.5.5... run Disk Utility to Repair Disk Permissions BEFORE and AFTER the update. That can fix a myriad of problems with any updates.
    Disk Utility is in your Applications/Utilities folder. Launch DU, select the FirstAid tab, then click Repair Disk Permissions. Takes about a minute to run depending on the size of the drive. When it's finished, Quit Disk Utility from the Menu Bar. That's all there is to it.
    Carolyn

  • ITunes does not recognize my Nano after update to 7.6.0.29

    I recently updated my iTunes software to version 7.6.0.29 and my Nano 3rd generation is not recognized anymore. Once it is plugged into the computer, Windows locates it and opens up the Windows Explorer. iTunes does not find the Nano at all.

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • Imac does not recognize my usb after installing mountain lion

    My imac don´t recognize my usb after installing mountain lion, also don´t let me see all my photos in jpg format

    What is "my USB"? If it's an external USB device, is it ML compatible?
    Which app do you use to open JPGs? Is it ML compatible?

  • My PC Suite does not recognize my mobile after I u...

    I am using a Nokia 3500c.
    First I updated the software version from V 05.51 to V 7.0 using Nokia official site.
    Then my PC suite (version 6) couldn't recognize my phone. It was fine before I updated the firmware.
    So I uninstalled the PC suite and downloaded the latest version 7.0.9.2 and installed it.
    Still nothing happened, still the PC suite couldn't find my mobile and still Windows(XP) shows "USB Device Not Recognized".
    Both updates, of mobile software and of PC suite are supposed to support Nokia 3500c, but...
    By the way the PC suite reads (now as well as before) another mobile Nokia 6270. Why is there a problem with my phone??
    Any idea guys.
    Message Edited by pra1001 on 02-Nov-2008 06:51 AM

    Hi,
    I don't know anything about your windows so it is quite difficult to know what is going wrong...It would be nice to get some traces from your PC Suite! (Then I can compare traces with my (WinXP) PC Suite and find out what may cause this problem).
    If you can take some logs, do this:
    1. Go to http://www.sysinternals.com/Utilities/Filemon.html and download Filemon (it is end of the page).
    2. Start FileMon.exe and click 'Options', 'Filter/Highlight..' and set string: *servicelayer*;*Service~1*;*services.exe* to 'Include' option.
    3. Go to http://www.sysinternals.com/Utilities/Regmon.html and download Regmon (it is end of the page).
    4. Start RegMon.exe and click 'Options', 'Filter/Highlight..' and set string: *servicelayer*;*Service~1*;*services.exe* to 'Include' option.
    5. Press 'Ctrl+X' to both tools and then open the task manager and select ServiceLayer.exe (or Service~1.exe), press End Task button and then Ok.
    6. Open Nokia Connection Manager (Manage connection) and after that connect your phone to cable.
    7. wait about 2 minutes and save logs and attach those log files to your response message.

  • Time machine does not recognize backup disk after Yosemite

    I have this issue in both macs I own, a 2010 MBP, and a 2012 Mac mini. After I upgraded to yosemite, Time Machine will not find my backup disk. I have been using the same network attached storage drive for 4 years for time machine backups. I has worked fine with all the macs I've owned until now. I can see the disk in Finder, I can go to disk utility and mount the Time Machine disk, but when I go to Time Machine preferences and try to select the list, the disk is not listed there, even though is mounted.
    Any ideas?
    Thanks!

    A third-party NAS is unsuitable for use with Time Machine, especially if it's your only backup. I know this isn't the answer you want. I know Time Machine accepted the NAS as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you try to restore, and find that you can't.
    Apple has published a specification for network devices that work with Time Machine. None of the third-party NAS vendors, as far as I know, meets that specification. They all use the incomplete, obsolete Netatalk implementation of Apple Filing Protocol.
    If you want network backup, use as the destination either an Apple Time Capsule or an external storage device connected to another Mac or to an 802.11ac AirPort base station. Only the 802.11ac base stations support Time Machine, not any older model.
    Otherwise, don't use Time Machine at all. There are other ways to back up, though none of them is anywhere near as efficient or as well integrated with OS X. I don't have a specific recommendation.
    If you're determined to keep using the NAS with Time Machine, your only recourse for any problems that result is to the manufacturer (which will blame Apple, or you, or anyone but itself.)

  • Photoshop Elements 10 does not recognize my printers after upgrading,  I need it to recognize all my

    I have been a long time user of Elements.  I recently upgraded to 10 and it no longer recognizes my printers.  It says that I need to install printers.  When I look in Windows my printers are still installed and work with other programs.  The forum wants my to set a photo printer as a default, but i use a laser printer as a default for word processing.  This seems to be a serious problem for more than just me.

    You're not talking to Adobe here. The responders are users, like you, trying to help. Did you rename one of the HP printers, as suggested?
    Also, have a look at this thread:
    http://forums.adobe.com/thread/947843?tstart=0

  • IPhoto does not recognize iPhoto Library after upgrade

    Machine:  iMac, OS 10.8.2, iPhoto 9.4.1
    Symptoms:  After upgrading iPhoto to 9.4.1 I cannot open my iPhoto library of some 30,000 photos.  I can see the library in the finder, but iPhoto doesn't want to link to it.  It did show in the library pane briefly the Events and Pictures at the full count, but then dropped to zero.
    Actions:  Opened iPhoto with the OPTION key to specify which library iPhoto should use.  Not effective.
    Opened iPhoto with the COMMAND AND OPTION keys and ran all actions from repairing permissions, rebuilding thumbnails, repairing the database, and rebuilding the database.  Results:  3 Events and 265 Photos.  32,577 photos in Trash. 
    What steps will restore the Library to its original state?  Will this restore meta-data, captions, events, dates, etc?

    Try this. Worked for me.
    - turn off your router
    - turn off you Mac's after removing all available printers
    - turn off all iDevices
    - do a factory reset of your printer remove all cables min. 30 sec.
    - turn on your router first
    - ran the network set up wizard
    - give your printer also a new name like "DeskJet 2015"
       Something which you don't have used before.
    - turn on your Mac's and add your printer
    - turn on your iDevices at least.
    Should work after these steps.
    It worked for me including all iDevices.
    iOS and Yosemite

  • HT201263 itunes does not recognize my iphone after update

    First I had Trouble installing the latest Itunes Update, then I had to delete Itunes from my computer and re-install it. Now, it doesn't recognize my Iphone and I can't sync. What do I do now?  Yes, I have an older Iphone (3GS) but, what the ****!
    Any Ideas, Anyone?
    Thanks
    FurrfaceOK

    Hello FurrfaceOK,
    The following article provides troubleshooting that can help get iTunes to see your iPhone.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

Maybe you are looking for

  • Appearance and Geometry behavior on CloneTree

    Hi guys.. I have a difficulty in understanding how Appearance and Geometry behave on CloneTree. I hope somebody here can help me. I have a BranchGroup BG with a total 4 Shape3D's contained in it. When I created those Shape3Ds, I've made sure that the

  • I couldn't receive confirmation email to complete registration.

    For 4 hours that I find the way to complete this registration for download only Facebook. Since I started trying I didn't receive any confirmation email. It ensured me that how strict is US Policy , so should I attach you my US visa for complete it?

  • Fiscal year independent Activity price determination

    Hi, I have a question regarding the activity prices in Controlling. We have a activity price plan(KP26 transaction) which is same every year. We do not want to copy this price every year . Is there a way to get this price for any year. Currently syst

  • IOS 5 on 3Gs iPhone,There was a problem downloading the software for the iPhone

    I have attemepted to update my iPhone 3Gs 8-10 times now over the past three days and keep getting the following error message: There was a problem downloading the software for the iPhone " My iPhone". The network connection timed out. Make sure your

  • Whats the purpose for the Application Manager?

    Here's what I'd LIKE the application manager to do: I use the Adobe Creative Cloud.  This was advertised as a service where you go to always get the latest Adobe software so everything is kept up to date. I assumed this to mean that the patches that