Gradient adjustment layer

Hi,
I'm new to adjustment layers. I'm able to make such layers now, but when selecting gradient and selecting "align with layer" option, it actually aligns with the whole document, not just the layer. When I click between the adjustment layer and the image layer while holding ALT, the gradient is out of view.
How can I have a full gradient on one particular layer?
-Ron

The align with layer seems to only work if you have a selection when you create the gradient fill layer, or the gradient fill layer is limited by it's own layer mask. Holding the alt key down and clicking between the gradient fill layer and a lower layer will clip the gradient fill layer to that layer, and the gradient will only show where the underlying had some visibility. Doing this will not change the way the gradient fill layer is applyed by using the align with layer. You would need to make a selection of the underlying layer and apply that selection to the gradient fill layer's mask. Seems like it should work with a clipping mask, but it doesn't seem to do that.

Similar Messages

Transparent Gradient Adjustment Layer

I would like to create an adjustment layer (so I can easily tweak it later) that creates the exact same effect as a gradient tool in the follwing example. I for the life of me can't figure out how to do it, maybe it's just not possible...
Using the gradient tool to create a mask I can easily get this result (note the gradient fades the image but maintains a transparent background):
Using a gradient adjustment layer I am forced to choose a color (white to transparent) and I get this:
I want the the former (transparent fade) so I can easily drop it over any color background later, but I want to later so I can easily adjust the % of fade later.
Is there any way to make a gradient adjustment layer fade to transparent? I thought maybe some combination of layer blending would accomplish it, but haven't been able to figure it out. I'm trying to keep it simple, but it's ok if the solution is a little complicated as I plan to automate it into an action that'll be applied to dozens, maybe hundreds, of images.

»Is there any way to make a gradient adjustment layer fade to transparent?«
Obviously, because that’s what Your gradient is – white from 100% opacity to 0%.
Transparency is a feature of the layer, its blending settings, clipping masks, any masks applied to it or the containing groups … – so it cannot be added »on top«, as You seem to assume.
If I understand correctly You want to use it as a mask for another layer.
One way to achieve that would be to place the gradient (X% opacity to Y%) below the layer You want to mask, convert it to a Smart Object (or rasterize it), set its Fill to 0%, turn off Blend Clipped Layers as a Group in the Blending Options and create a Clipping Mask (alt-click on the line between the gradient and the layer above in the Layers Panel).
Changing the fade would then necessitate opening the SO and making the changes there, so convenience-wise that’s not so great.
But maybe someone else has a better idea.
Incidentally: Your screenshot seems to indicate that You don’t make use of Smart Objects to automatically update the »reflection« with the upper object and You might want to consider it.

Grouping Adjustment layer with Gradient Fill layer

Page 151 of "The Missing Manual" suggests that one should be able to group a Levels Adjustment layer with a Gradient Fill layer so that the levels adjustment fades out to one side.
If I understand this correctly, the setup would be:
Levels Adjustment Layer (grouped with layer below)
Gradient Fill layer (with a gradient from Opaque to Transparent)
Photo in Background layer
but I cannot get the desired effect of original picture on one side blending through to adjusted levels on the other.
I can get the desired effect if I dispense with the Gradient Fill layer and simply manually create the gradient on the mask of the Levels Adjustment layer but this loses the advantage of easy adjustment of the gradient.
[Thanks to those who answered my question about linking a mask to a layer. As this is a separate query, I thought it best to start a new topic]

Sanders1,
I thought I'd try it, myself, and got results that I did not expect...
http://www.pixentral.com/show.php?picture=1OVdT0C7oX46DsPm6TrfT5xxrm3h
1 - The background image.
2 - I created a Gradient Fill layer using color (red) to transparent.
3 - I created a Levels Adjustment layer, set to reduce red and green,
leaving a blue image.
4 - I grouped the Levels Adjustment layer with the Gradient Fill layer.
Is this the type of result you are seeing? I wonder what is the logic.
Byron

Using Gradient Map Adjustment Layer to Emulate Curves

In PSE 4, the Curves function isn't available, either natively or via add-on
tools. Personally, I like adding a modest S-curve to many of my photos to
improve the contrast. Oh, well...
I remember, however, that Susan Stewart (one of the early members of this
forum) had developed a technique to use the Gradient Map Adjustment Layer as
a curves surrogate. I'm not sure exactly what she did, but I believe it
involved using the black-to-white gradient and setting the layer blend mode
to Overlay. The gradient can be modified by adding Color Stops along the
continuum between black and white to create the S-shape.
Anyone have any experience with this approach - or another Curves
replacement to consider?
Thanks,
Chuck

Chuck,
It involves using the Luminosity blend mode. Here's a PDF that gives instructions. Skip down to Version two page 3 or 4 for instructions on using a gradient map to simulate curves.
http://books.elsevier.com/companions/0240519566/pdfs/curves.pdf
Terri

Adjustment Layer Problem

My Sepia and other options have disappeared in
LAYER > NEW ADJUSTMENT LAYER > PHOTO FILTER > OK.
They've been replaced by a bunch of numbers and letters.
I have version 4 on Mac OS X and can't figure out how to reload
the original filters.
This seamed to have happened after I'd played around with Gradient Maps.
Thanks So Much to anyone who can help!

Quit PSE, then relaunch it while holding down command+option+shift. Keep holding the keys till you see a message asking if you want to delete the settings file. You do.
I'd also repair permissions.

Curves adjustment layer for greyscale images

If you are editing a greyscale image, the curves adjustment layer is shown in "reverse" style (as you would expect to work with a CMYK image) that that is awkward to work with. If you use Image->Adjustment->Curves, you have the option to invoke the curve display in Light (0-255) or Pigment/Ink % in which the LIGHT does what is appropriate.. It would be nice to have the ability to toggle the Light/Pigment in the Curves Adjustment layer.
I think I remember that, in the good old days of CS/CS2, you could alt-click on the gradient to alter the tonal direction of the curve.

Woops... I just found that the Curves Adjustment layer flyout has a Curves Display Options that allows the setting - and it is sticky. Sorry for the waste bandwidth.

In Photoshop CC (2014), Hue/Saturation adjustment layer properties disappear

I am running Photoshop CC (2014) under Windows 7 Professional. The program is up to date.
Today, while editing an 8-bit image, I added a Hue/Saturation adjustment layer. Then, in the properties panel for this layer, with the on-image adjustment tool selected, I clicked a color in the image to get a range of colors whose saturation I wanted to adjust. Next, using the saturation slider in the properties panel, I increased the saturation of this range of colors. Finally, I closed the properties panel by clicking on the double arrow in the upper right corner.
Later, I wanted to modify this adjustment layer. I double-clicked on the layer thumbnail to reopen the properties panel, and found that, although the previous increase in saturation was still operating, the saturation slider was back at its default position, and the range of colors that I had previously established was gone. Thus, I could not make further adjustments to this range of colors.
I then did some further experimentation: I deleted the first Hue/Saturation adjustment layer, and created a new Hue/Saturation adjustment layer. I then again established a range of colors as above, again increased the saturation of these colors, and then again closed the properties panel by clicking on the double arrow in the upper right corner. This time, however, when I wanted to try to modify this adjustment layer, instead of double-clicking on the layer thumbnail to reopen the properties panel, I right-clicked on the layer and then clicked on "Edit adjustment..." This opened the properties panel, which, this time, correctly showed my original adjustments -- the saturation slider showed the positive adjustment that I had previously made, and the range of colors established earlier was still shown. But then, on a hunch, I added a Curves adjustment layer above the Hue/Saturation adjustment layer. Now, when I again opened the properties panel of the Hue/Saturation adjustment layer (by right-clicking on the layer and then clicking on "Edit adjustment..."), my previous settings were gone -- the saturation slider was at its default position and the range of colors was gone! (But the increase in saturation was still operating.)
Thus, it appears that there is a bug in the functioning of the properties panel of the Hue/Saturation layer: In short, once you have added a further adjustment layer, you can't then go back and make changes to the properties of the Hue/Saturation layer. I would be interested to hear if others have noticed this. Also, is Adobe planning to address this?

OK, I am not entirely sure I have understood your post completely, but when you edit a colour range with a Hue/Sat layer, and click off and back on again, it will default to showing the RGB values, which you may not have made any adjustment to. If you pick the previous colour from the image, or a similar colour, it _will_ show you the adjustments. So long as your picked colour is contained within the range of the previous adjustment.
Ypu could also use the RGB drop down (actually they call it Master nowadays), and chose the colour that is closest to your previously picked colour. I expect you are away that you can edit the colour range being operated on by dragging the four sliders on the two colour bars at the bottom of the Properties panel.
Does that make sense, or am I going in the wrong direction?

Adjustment Layer Crashes Premiere or Damages Project

Nearly every time I have tried to use an adjustment layer in Premiere Pro CS6, the application has hung if I tried to scrub through the video. Yesterday I decided to try placing an adjustmnet layer and only using the play function rather than scrubbing and it seemed to work alright. However, this morning premiere will no longer open the project file. Instead it give me the error message "The project could not be loaded, it may be damaged or contain outdated elements." This is an extremely heinous bug! Can anyone help or is this feature really just unusable?!!
Additionally, because I was so fastidious about saving, given the previous crashes, the only functioning autosave is 6 hours out of date!
HELP!

I use ALs a lot, and haven't yet seen this behavior.
Have you added any effects to the AL? Does scrubbing work OK without the AL?

Applying an adjustment layer / or adjustment TO a layer in a grayscale image is NOT happening!

I'm a long time user of Photoshop, but must admit to being stumped here. I have a very high resolution scanned image from a B&W antique engraving, and I'm trying to "open up" some of the lines to bring out the details in the engraved image while keeping the image as close to the "line art" B&W of the original as possible.
I have the image now "cleaned up," having taken out the yellow color casts, etc., and have a grayscale 8-Bit image in the Photoshop file.
I've discovered that I can use an adjustment TO the layer itself, or an adjustment layer on the layer in the grayscale image to take away some of the density and "open up" the line art a little, so it has better details by effectively "choking" the dark lines back to make them less thick and dense.
Here's the thing, though:
When I tried making the adjustments via image > adjustments > levels DIRECTLY ON the layer (instead of using and adjustment layer to achieve this), every time I hit the OK button to accept the adjustments I've made that way, the dialog box closes and the layer seems to revert to looking just the same as it did BEFORE I opened the dialog box to adjust the layer!
When I try making the adjustments by using an adjustment LAYER, and I try to save the Photoshop image as a TIFF file, I find that when I open the saved TIFF image, the layer adjustment I'm seeing in the source Photoshop file has NOT been applied, and the image in the saved TIFF file looks just as dense as the original, unadjusted image in the Photoshop file!
What am I doing wrong here? I want to be able to save out that adjusted image as a TIFF file to use in designs, but I cannot seem to save it as a TIFF that actually CONTAINS or reflects these adjustments after having MADE the adjustments!
Whazzup?!!

Well, I took the layered TIFF file you gave to me and opened it in Photoshop, reviewed the adjustment layer in there and its effect -- thanks: you get what I was trying to do -- and then saved it out as a flat TIFF image, and when I reopened it, voila! it looked like the adjustment had indeed been applied. So this IS a real head-scratcher indeed.
I've now tried going back to my source file and doing the same thing. One thing that I notice is that when I do the Save As of the TIFF with the adjustment layer in it (OR the PSD file, for that matter), when I go to Save YOUR file, the Layer Compression Options are grayed out, but when I go to Save MY file, the Layer Compression Options are active. I've tried now saving both with RLE layer compression AND As a Copy ("discard layers and save a copy"), and neither works.
I noticed, too, that your file had the layer below the adjustment layer still as a "Background," instead of a named layer, so I went back and applied an adjustment layer to a copy of my TIFF file, leaving the image in its layer as a Background layer, and still this did not work.
The only other difference I saw between your TIFF file and mine, is that mine contained transparency, as I've silhouetted away a portion of the image to isolate the central image of the scanned engraving. But even when transparency is not a factor (i.e. I go back and start with a flattened, nontransparent image layer of my TIFF file with a single Background Layer, and I apply the adjustment layer to that, I get the compression options grayed out on Save, and STILL the saved TIFF image I get out of it has "reverted" to the unadjusted appearance.

Need to create and adjustment layer to compensate for undesirable hue caused by lens

I’m looking for some help to set up an adjustment layer to compensate for a specific lens colouration issue. Basically I’m using a GoPro (on a drone) but I have fitted an aftermarket flat lens. Sharpness is good, but the lens has a well known issue – it results in pink hue around the edges/corners. Most of the time it is barely noticeable, other times it jumps out. It also depends on the monitor I am using eg. my TV seems to bring it out a lot more than my laptop.
Here is an example - look around 0:35 to 0:40 http://vimeo.com/117790732
And to try get an idea of where the issue is on the frame, I picked an example image of frost covered grass, very early in the morning. I then cranked up the saturation to 100% and this is what it looks like:
I would like to be able to compensate for this. Presumably this should done with an adjustment layer made in Photoshop which I can then import into Premier Pro. Can anyone advise as to how I do that?
Any help will be appreciated.
Thanks,
Jacques

Hi Trevor
Thanks for your reply. I did what you suggested and created 2 masked adjustment layers which are basically concentric rings with differing levels of magenta reduction and I then feathered the edges. I have attached 2 images below to show the before and after effect. I’m working on getting this more accurate and I’m also going to look into the technique posted by Normfb. Big thanks to you Trevor for suggesting this – this is all quite new to me and it was very useful to play around with these adjustments layers, masks etc.
Jacques

How to set levels values in adjustment layer via script?

I try to make a script which generates a non destructive adjustment layer for levels which already sets values for shadow levels and highlight levels. I tried the scripting listener in order to record it. Unfortunately the scripting listener only records the creation of adjustment layers but not their settings like shadow or highlight levels.
The first question here: Why can't the scripting listener do this?
So I tried to do it on my own and came up with the following script which won't work. My second question therefore is, can you help me to make a script which achieves my goal? Thanks a lot. I use Photoshop CC 2014.
var desc780 = new ActionDescriptor();
desc780.putInteger( charIDToTypeID( "ShdL" ), 60 );
desc780.putInteger( charIDToTypeID( "HghL" ), 190 );
var list126 = new ActionList();
list126.putObject( charIDToTypeID( "LvlA" ), desc780 );
var desc779 = new ActionDescriptor();
desc779.putList( charIDToTypeID( "Adjs" ), list126 );
executeAction( charIDToTypeID( "Lvls" ), desc779, DialogModes.NO );
Here is the script which has been recorded by the scripting listener. As you can see there is no setting of the adjustment layer.
var idMk = charIDToTypeID( "Mk " );
var desc188 = new ActionDescriptor();
var idnull = charIDToTypeID( "null" );
var ref135 = new ActionReference();
var idAdjL = charIDToTypeID( "AdjL" );
ref135.putClass( idAdjL );
desc188.putReference( idnull, ref135 );
var idUsng = charIDToTypeID( "Usng" );
var desc189 = new ActionDescriptor();
var idType = charIDToTypeID( "Type" );
var desc190 = new ActionDescriptor();
var idpresetKind = stringIDToTypeID( "presetKind" );
var idpresetKindType = stringIDToTypeID( "presetKindType" );
var idpresetKindDefault = stringIDToTypeID( "presetKindDefault" );
desc190.putEnumerated( idpresetKind, idpresetKindType, idpresetKindDefault );
var idLvls = charIDToTypeID( "Lvls" );
desc189.putObject( idType, idLvls, desc190 );
var idAdjL = charIDToTypeID( "AdjL" );
desc188.putObject( idUsng, idAdjL, desc189 );
executeAction( idMk, desc188, DialogModes.NO );

Photoshop Scripting

Cross-dissolve from white frame to adjustment layer no longer works in CC 2014

Windows 7, Premiere Pro CC 2014
I have a video clip in a nested sequence on V1 and an adjustment layer on V2.
I want to dissolve from a white frame to the clip using the adjustment layer.
In PP CC (not 2014) this was simple:
Starting with a white PNG graphic on V2, cross-dissolve to the adjustment layer.
However, in PP CC 2014, this causes a dissolve to BLACK over the duration of the dissolve and then a CUT to the video.
This behavior in CC 2014 is illogical. Why has it changed?
There are other ways to do this, but this one was quick and easy, and is required for hundreds of clips in existing sequences / projects.
Response from support via live chat:
thank you for your patience
the adjustment is layer is not functioning properly
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
please mention it in the feature/bug request form

For me with a color matte it shows exactly the same behavior as with a PNG.
You're dissolving between the matte and the adjustment layer on V2?

Media Encoder CC rendering adjustment layer seperately

I just bought a new Mac Pro with all the goodies there were available and now want to use it as the central Mac for exporting Premiere Pro sequences.
We work from a central server which has all the projects on it. Our different co-workers here sit behind their Macs and open projects from the server.
I've set up AME on the Mac Pro to check a watch folder for Final Cut XML's which my co-workers export from their Mac's. The problem is that whenever
there is an adjustment layer in a sequence.. AME exports that separately from the rest of the sequence. How do I get it to export just the sequence with
the adjustment layer in it?
Thanks!

Adjustment layers are not support by FCP XML so this will never work unfortunately. I do see the issue you describe though and how the adjustment layer is interpreted varies based on whether you exported the sequence or the project. However, the point is irrelevant since the adjustment layer will never render properly regardless of how you export the XML.

Media pending with adjustement layer CC 2014

Hi,
I have so many problem with adobe premiere pro CC 2014
- Media pending with adjustment layer track and some Red giant effects on it. Impossible to rendering ! Please, what the problem ?
- I loose sound sometimes during playback, I can not hear anything.
- Sound make a big noise sometimes, like a 1khz but not exactly. It appears when I go up the volume after adding gain or push up the volume in effect control.
Have you got solutions please ?
Thank you

>What to do?
Start by asking in a forum that is specific to your program... what program are you talking about?
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Why are the adjustment layer controls grayed out?

I have used an adjustment layer in CS5 and when it was first used I could adjust everything. Now most of the controls have grayed out and whilst I can slide the sliders I can not type figures in nor use the radio buttons! Why has it locked me out? It has happened on a few images and with both Colour Balance and Hue and Saturation Layers.
The image above shows the problem with the top Colour Balance layer where I can not select Shadows or Highlights, nor type in figures for the sliders BUT I can slide them and change the tick on Preserve Luminosity! The basic image being edited is an 8-bit RGB file.
Adding a new adjustment layer (Colour Balance) on top of this one initially showed the same problem but after adding 3 more new adjustment layers suddenly eveything came back to fully working again - even the original problem layer!
This problem keeps happening with some of my images. It is happening on all 3 of our photoshop PC's, so it looks like a basic PS bug. Has anyone else seen this or know why it happens?

Thanks for the suggestion but that has no effect on them being grayed out or not. When this problem occurs it does not matter if the Mask is highlighted OR the adjustment itself.
But thanks anyway.
I am currently without the issue on the above example having removed the problem by adding additional adjustment layers and removing them again. Even if I now select just the adjustment mask I can still access ALL adjustment controls without problem.
But it will occur again as it has done over the last few months on a random basis. Hopefully someone else has seen this occur and found a solution?

Gradient adjustment layer

Similar Messages

Maybe you are looking for