Gradient banding is not smooth, with more halo white and dark black with poor tone

Hello
gradient banding is not smooth, with more halo white and dark black with poor gray tone

Hello, long shot, but...
Go to System Preferences > Universal Access and down in the Display: section make sure that the Enhance contrast: slider is all the way to left to Normal, or more to the right for less Contrast.
Universal Access> may be Accessibility in 10.8.x

Similar Messages

My 2011 IMac will not boot up past the White apple logo screen with the whirly circle

My 2011 IMac will not boot up past the White apple logo screen with the whirly circle. I have tried various commands but to no avail. does anybody have any advice?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

With iTunes 11, it is not possible to sync my iPhone, and my iPod with my computer

Whith the new iTunes 11, it is not possible to sync my iPhone and my iPod with my computer.
1. the iPhone AND iPod are not detected by iTunes, they don't appear any more on iTunes. (for eg with iTunes 10, we see clearly that an iPod/iPhone is connected)
2. There is no possibility (page, button, etc) to sync and to see what is on the iPhone/iPod
Why?
How can i sync my iPhone and my iPod with iTunes 11?
How can i manage what is to sync between iTunes 11 and the iPhone/iPod?

Im using a PC, and yes i tried everything, turning my phone off, my pc off, plugging the phone on another computer, but nothing works

F110- not able to clear the debit and credit entry with the same reference

Hi,
I am not able to clear the debit and credit entry with the same reference in F110 even after having the payment terms as immediate payment, payment method is maintained in document no and vendor master data. Both debit and credit entry is appearing in FBL1N as an open item but it is not appearing in F110.
In Log message appear as 8 days grace period is existing whereas as payment term is just 0001- immediate payment.
Kindly advice me what could be wrong.
Thanks,
Manya.

Hi,
Credit and debit balance in vendor account are not cleared automatically when only vendor line item has payment method and credit memo has not payment method. Also when there is not payment method maintained in vendor master data.
In such case to avoid payment to vendor when vendor has debit balance we perform debit balance check.
In second scenario when u2018individual paymentu2019 is selected in vendor master data vendor invoice and credit memo are not cleared automatically in F110.
To setoff vendor credit and debit balance in F110 you to uncheck u2018individual paymentu2019 check in vendor master data > company code data > payment data.
Thanks!
Raju

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator.

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.

hey HAbrakian!
You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/ht3399
Take care, and thanks for visiting the Apple Support Communities.
-Braden

I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

That is because you don't have a web server configured and running to serve the html page. In order to see the page in a browser you need to access it using a url similar to http://localhost/~yourUserName if you are serving the page from your user account.
Prior to Mountain Lion you could go into web sharing and turn on the web server. With Mountain Lion there is no option, other than using terminal, to turn on the web server. The web sharing menu item has been removed in Mountain Lion. Apache is still on your computer but it will take a little searching these forums or the Internet to find how to turn it on.
If you want a graphic user interface to turn on/off the Apache server you could download and install a server application like xampp, http://www.apachefriends.org/en/xampp.html. I use this and it works well.

My Premiere Pro crashed and will not reload. Can I uninstall and re download with Creative Cloud?

My Premiere Pro crashed and will not reload. Can I uninstall and re download with Creative Cloud?

Yes, if you're a Cloud subscriber and are running a 64 bit operating system.

Printer not connected to internet - have pulled and reattached ISB with no change.

Printer not connected to internet - have pulled and reattached ISB with no change.

Is the printer connected to a network? For any Internet functionality to be present on printers, the printer will need to have its own connection to the network. It sounds like the printer only has a USB connection.
On the printer, go to Setup>Network>Print Network Configuration Page.
Does it have an IP address, subnet mask, default gateway, and DNS servers listed (other than 0.0.0.0 or 169.254.X.X)? If so, then it is connected. If not, then go to Setup>Network>Wireless Setup Wizard to connect to the wireless network. This should get the printer connected provided there is a wireless network available.
What brand and model is the router (if one is present)?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

My school has a website. The professor uploads files in Word. When I click on the link at home using Pages, the download window opens with nothing in it and Safari opens with a blank in the address book. What Could be wrong? Wrong set up?

My school has a website. The professor uploads files in Word. When I click on the link at home using Pages, the download window opens with nothing in it and Safari opens with a blank in the address book. What Could be wrong? Wrong set up?

Hi Jo,
If I'm interpreting this correctly, the Word file downloads correctly, but when you open it in Pages, the link(s) which your instructor has embedded in the Word file are not correctly translated into Pages.
If the link shows the actual address, you should be able to copy that and paste it into the location bar in Safari, press return, and get to the website that way.
An alternate route might be to download one of the open source Office applications, OpenOffice.org, LibreOffice, or NeoOffice. These are written to more closely emulate the behaviours of MS Word than Pages, and may provide better support for links embedded in Word files.
Regards,
Barry

BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network

I'm trying to create an "ExtraLarge" VM with multiple NICs. The New-AzureVM returns the following error:
BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network
interfaces are not supported in the same deployment, also a virtual machine having no secondary network interfaces
cannot be updated to have secondary network interfaces and vice-versa.
But I have no other VMs. Or at least I did and then deleted them and all their disks. The service has no deployments (either staging or production).
Why is New-AzureVM complaining about a mismatch of VMs with and without secondary network interfaces when no other VMs exist?
I have tried many things to fix this, including the deletion of ALL of my resources. I have deleted and created the service many times, both with an affinity group and without. I have a screen print of the -debug output if your interested.
Thanks for the outstanding help.

Hi Ron,
IMPORTANT NOTE: Please do not post the CONFIDENTIAL DETAILS ever on the public forums, this is HIGH RISK action.
Please send an email with your contact details to my email
[email protected] so that I guide you on steps which help you come out of the current scenario. Thank you for understanding.
I suggest you to create a new VNET and new VM with cloud services. Create Multiple NIC VM. Let us know the results.
Ref:
http://azure.microsoft.com/blog/2014/10/30/multiple-vm-nics-and-network-virtual-appliances-in-azure/
http://blogs.technet.com/b/canitpro/archive/2014/11/04/step-by-step-create-a-vm-with-multiple-nics-in-azure.aspx
If you are unable to create a VM with multiple NIC, please open a support case as it requires more confidential information which is out of scope of FORUM support offerings.
Regards,
Girish

HT201210 nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and somet

nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and sometime just hear from other user that it 's difficult to use then force they change phone that use to handle to another.

It is a feature to discourage the theft of iPhones by making them useless if resold. It's not going anywhere. It's simple: just don't buy a phone until you make sure that the activation lock has been disabled.

Can I transfer docs between a MacBook with a Intel processor and a iMac with a PowerPC processor by using a usb cord?

Can I transfer docs/folders between a MacBook with a Intel processor and a iMAC with a PowerPC processor using a usb cord? Or by loading from the MacBook to a external drive and then to the Imac.

You need to use an external drive, FireWire cable, Ethernet cable, or wireless connection.
(73713)

Hi, i have an iphone5 with one icloud ID, and a IPad2 with another Icloud Id, i want to unify both ID, how can I do?

Hi, i have an iphone5 with one icloud ID, and a IPad2 with another Icloud Id, i want to unify both ID, how can I do?

Use the same ID on both. Be advised that downloads are forever tied
to the AppleID used to obtain them, and items from one ID cannot
be transferred to another ID.
Use the ID with the most items you want to keep. Anything from the other
ID will have to be redownloaded with the preferred ID (if purchased, they
will have to be paid for again).

I preordered album weeks ago with a $25 card and was left with $10. But why do I have to purchase it again?!

I preordered Lana Del Rey's Ultraviolence album weeks ago with a $25 card and was left with $10 in my account. So I get an email saying that Ultraviolence was ready download. I go on iTunes and I have to buy it again, wth?!?!?! I have the receipt number and everything. Why do I have to buy it again? I signed in and out of my account to see if it would make a difference but nothing changed. Oh and this wasn't the first time this happened. I was jus dumb enough to purchase the album again when it came out. Did I just get ripped off?

What happens when you try to download the album, and how are you trying to download it ?
You aren't charged at the time of pre-ordering, only when it is released - you are only charged for items when they become available (e.g. if tracks were released ahead of the actual album then you would be charged for those tracks), between pre-ordering and release you could cancel the pre-order so you can't be charged until release.
Have you checked the purchase history on your account : http://support.apple.com/kb/HT2727 ?
If the album shows on your purchase history then does the Store > Check For Available Downloads menu option on your computer's iTunes download it, and/or does it show in the Purchased link under Quicklinks on the right-hand side of the store homepage for downloading ?

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

Try starting up with your Snow Leopard DVD and see if the disk can be repaired. Once you are at the installer screen go to the Utilities Menu and choose Disk Utility and choose repair disk. You might also want to try Diskwarrior.
Hope this helps.
Ben

Gradient banding is not smooth, with more halo white and dark black with poor tone

Similar Messages

Maybe you are looking for