Gradient Fade in Premeire Elements 7?

I want to fade one video into another so that both clips play at full opacity except at the fade point.
In other words, you know how you can use the transgradient fade in Photoshop to blend two images together? This is what I want to do with two video clips in Premiere Elements 7. How do I do it?

Alright... here's a web page that shows the simple transgradient effect...
http://www.mediacollege.com/adobe/photoshop/transparent/gradient.html
I want to do the exact same thing except with VIDEO using Premeire Elements 7.
I want to layer one video on top of another and have BOTH videos playing at once for as long as I want.
Hope this clears it up.

Similar Messages

  • Premeire Elements 12 can't see disc menus added to project in PE 10

    I have a project that I created in Premiere Elements 10. I just installed Premeire Elements 12, and while I was able to open my project, PE 12 apparently can't see the disc menu I created in PE 10. I tried to recreate the menu, but when I installed PE 12, the install wizard apparently failed to install the menus.
    I have the installation CD. I just spent/wasted about 45 minutes with a chat agent who either couldn't understand what I needed to know how to do, or didn't know how to do it either, and never transferred me to there supervisor after saying they would. The agent wanted me to download the components, which means I have to purchase them, when I already purchased the expensive software (which should include the components needed to use it).  If I try to run the install wizard again to install the missing menu component, it first tries to uninstall Premiere Elements.
    Does anyone here know how to use the installation CD to install missing/additional components on a computer that is not connected to the internet?

    elements7user
    Project created in earlier version does not always open with later version. So, the classical comeback is to finish a project in the program in which it is created. Do you have Premiere Elements 10 as a fall back? Even the path back may not be possible. If you have taken the original 10 project and edited it in 12, you should not be able to go back and edit in 10 again. But, let us keep that in mind, but see if we can find a way to open the 10 project successfully in 12, menus et al.
    Both 10 and 12 have the Blinking Lights Theme, so we are not dealing with a discontinued theme. And, Blinking Lights is not one of the photoshop.com plus content. Good.
    In 12, when you go to Tools/Movie Menu/select Holidays and Events/Blinking Lights, do you find the thumbnail for Blinking Lights with a blue band at the top right corner of the thumbnail. If so, what happens when you right click the blue band and select Download Now? Do you have your antivirus and firewall turned Off? You cannot use Blinking Lights with the blue band. Only an incomplete set of assets for the Blinking Lights installs with the program. All have to download essential files from within Movie Menu in order to get that menu to work.
    Also, we want to know what is going on with this theme's assets at the hard drive save location. To do that, go to
    Local Disk C
    Program Data
    Adobe
    Premiere Elements
    12.0
    Online
    DVD Templates
    All_Lang
    Holidays and Events
    Blinking Light
    and then tell us what you find in the Blinking Light Folder. Any .psd files? Before or after the Download Now?
    In the next hour or so, I am going to do a complete run through of creating a project with Blinking Lights menus in 10 and trying to open it with Blinking Lights menu in 12 in order to make sure that there are no special glitches in the path.
    Definitely be set up for Run As Admininstrator.
    More later. I will give you a detailed account on my results.
    Thanks for the follow up.
    ATR
    Add On...Where is the media for 10 project? Is the 10 and 12 work being done on the same computer? If you are working from one computer (with 10) to another (12), did you transfer the 10 project to the other computer with 12 using a Copied or Trimmed Folder from Project Archiver so that you took the 10 project media along with its project.prel?

  • I purchased Adobe Premeire Elements and Photoshop Elements 10.0 in 2012. Since then my computer died.I would like to download them on this computer and am unable to do so successfully. Please advise. It was a downoad purchase with no CD

    I purchased Adobe Premeire Elements and Photoshop Elements 10.0 in 2012. Since then my computer died.I would like to download them on this computer and am unable to do so successfully. Please advise. It was a downoad purchase with no CD

    christineae
    It is not clear if your Premiere Elements 10 was a downloaded purchase from Adobe or from an authorized reseller.
    However, do you have a purchased serial number for the product?
    If you have the purchased serial number, you can download Premiere Elements 10 tryout files from the following web site
    and insert your purchased serial number in them during installation to make them your own.
    Photoshop Elements 10 Direct Download Links: Free Trials, Premiere | ProDesignTools
    It is important to read and carry out carefully that web site's "Note: Very Important Instructions" in order to avoid an Access Denied message.
    Just in case message....
    But there could be a complication with regard to files from any source.
    Adobe allows you to have the purchased activated serial number on no more than 2 of your computers.
    If your failed computer has Premiere Elements trapped on it representing 1 purchased serial number, you will be able to installed
    the purchased serial number on only one more computer. If you have the purchased activated serial number trapped on 2 failed
    computers, then you will not be able to use that purchased serial number on another computer until you deactivate at least one
    on one of the other two computers. In this case, it is only Adobe who might be able to help you. None of this may apply to you. I mention
    it as a just in case caution.
    Please let us know if you have any questions or need clarification.
    Thank you.
    ATR

  • Gradient Overlay in Photoshop Elements 8?

    Gradient Overlay in Photoshop Elements 8? On the school laptop it has Photoshop elements 8
    I want to do a text style with a gradient overlay like here (in the Bubbly text part) :
    http://www.crunchyroll.com/forumtopic-612453/tutorialsipanda-/?pg=0
    But every time I do gradient it does the background not the text.
    How do I use Gradient overlay on the text?
    GoPDA Windows Mobile(Windows Phone) iPhone Android Tips

    Edit: I was unable to view the text example you linked.
    One way you can do this is to use a clipping mask:
    Here is a video which shows how to apply a gradient to text using a clipping mask:
    http://www.pxleyes.com/video-tutorial/photoshop-elements/10901/Versatile-Gradient-Text.htm l
    Above video is for PSE 6 but the method is the same. She might call it a clipping group instead of clipping group. (Clipping group = clipping mask; Adobe changed the name not the function.)
    Note: Hold in the shift key as you pull the gradient to constrain the gradient so it pulls evenly.

  • How to get FLV on On2VP6 codec from Premeire Element 11,

    Good Afternoon,
    We are currently using Premeire Elements 11 in conjunction with Captivate 6 to publish our elearning modules.
    We edit our videos in Premeire. I need to be able to change the .flv codec to be On2VP6 so our modules can be published using HTML5.
    Can anyone help me with this?

    Looking at all of the FLV Share/Publish settings, I cannot find a way to alter the CODEC. Maybe I am just missing something in PrE 11, and will feel foolish, when someone points it out.
    In PrPro, one can choose the FLV CODEC, such as On2VP6. In recent versions of PrPro, I think that it is the only option, and that Sorenson Spark has been removed completely. I just do not find the CODEC choice in FLV output settings.
    Good luck, and wish that I had more, but others will likely show me the error of my ways, and be more helpful to you,
    Hunt

  • Shadow/Gradient Fade to Transparent Effect

    Hello. I am using PS CS3 on MAC and I am trying to create the inner shadow gradient fade to transparent show in the sidebar of this webpage: http://kinoma.com/about/
    First, I create a rectangle with linear gradient fill that fades to transparent. Then I create an inner shadow on the left of the sidebar. I'm stuck on what to do next. How do I fade the entire sidebar to transparent on different sides? Thanks.

    Black to transparent gradient from left to right (then reduce opacity), then make a layer mask and make a gradient from top to bottom that's black to white to black.
    J

  • Premeire Elements 10: Unknown Error 2131042560: Burn to folder didn't work

    I'm using Premeire Elements 10. I kept getting Unknown Error 2131042560 at the 99% point in the burn process. I tried burning my project to a folder and was successful. I then copied the folder onto a DVD, which was also successful. However, the resultant DVD won't play in my DVD player.  How do I fix this?

    Some reading of possible reasons why, and software to use to write the folder
    Things and Software to AVOID when authoring/burning a DVD
    Start --> http://forums.adobe.com/thread/608660
    #2 has WHY Explained http://forums.adobe.com/thread/607390
    Plus http://forums.adobe.com/thread/562941
    Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
    Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
    When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no DVD player is required to read a burned disc, having a "good" one from a high quality blank will help
    Use Taiyo Yuden single layer or Verbatim Two layer Or Falcon Pro for inkjet printable Two layer

  • Does Premeire Elements 11 make a slideshow with different background themes?

    Does Premeire Elements 11 make a slideshow with different background themes?

    Em Smither
    Do you actually have Premiere Elements 11 Windows at this time? And, have you used any prior version of the program? I ask so that I van gauge how deeply to go into different aspects of the program. So, please excuse if I generalize now on matters that you already are aware of.
    Premiere Elements is a video editor that will support the use of your own stills and video and music on its Timeline tracks to export to file or
    burn to disc.
    The Instant Movie can be broken apart once created. And,that Instant Movie feature is editable, leaving components that you want, adding others, and removing others, and you can include your own music in it.
    But if you prefer to start from the beginning you can import your photos and music and then add your own assets to the tracks..title templates, backgrounds, etc probably along the line of what one of those Instant Movies would be aimed at. But, I do not see a choice for selecting a particular theme for the slideshow other than that. However, there is an opportunity to select a theme for the disc menus if the export is a burn to disc or part of the webDVD feature.
    Did you have in mind, something like placing a theme based background on Video 1 and then on upper tracks directly above scaling your photos so that the background can be seen around them?
    Please let me know if I am still not targeting your question.
    Thanks.
    ATR

  • Adobe Premeire Elements 8 beginner - DVD, Book, Magazine help?

    Hi,
    I know the basis principles from other programs, but never used adobe premeire :- elements/photoshop, and just purchased the duel package.
    I would like to start from scratch and learm properly.  I've tried magazines and they all seem to be photoshop based which I do want to learn, but want to start with Adobe Premiere Elements 8 first.
    Is there a magazine, which deals with the basics first then builds up to intermediate/advanced?
    Or the same as a DVD?
    Or should I just hit PC World and look at the array of books?, which again, most seem to photoshop based.
    I've look at podcasts, and found a couple, but they are short and only cover a subject or two.
    Any help / links would be much appreciated.
    Kind regards
    Andrew

    Well, at the risk of sounding like I'm pounding my own drums, I've sort of spent the last five years laboring on this forum (with over 5,000 posts!), writing books and even creating my own web site to help people get up on running!   I'd recommend you check some of it out.
    Http://Muvipix.com is a site dedicated to helping people get up and running with the program. There's a gathering of probably the world's most knowledgeable and helpful people on the Community forum -- and you'll find lots of free tips, tutorials, royalty-free music and stock footage and motion backgrounds there -- even more (like over 1000) if you subscribe to the site. I've created a free set of tutorials called Basic Training with Premiere Elements that should definitely get up and running with the basics. There's an intermediate series of 10 more tutorials that you can access if you subcribe to the site, plus dozens more on specific subjects.
    I've also written a number of books on both Premiere Elements and on the Photoshop Elements/Premiere Elements combo. They're available on Amazon.com and through the Muvipix.com store.
    Check out those reviews on Amazon!

  • We need adobe premeire elements for virtulization seetings

    we need adobe premeire elements for virtulization seetings

    As Bill says, you need to contact Adobe (this is a user forum). But it's my understanding that PRE has to be installed locally and run with Administrator privileges.
    You can start an Online Chat with Adobe from Section 3 at http://helpx.adobe.com/contact.html?product=premiere-elements&topic=downloading-installing -and-setting-up.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Premeire Elements 12 slow to start?

    Re: Very slow package start up.
    We have 6 licence's for premeire elements on site. However, sometimes they can take up to 6-7 minutes to start. (thats just the package, nothing else).
    Although in my office I get a start up time of around 5-7 seconds usually.
    Does the adobe try doing licence look-ups on every start up or do we have a different problem!,
    and is there any way to get a faster opening for the elements package. ?
    Thanks

    Ian_tech
    With your Premiere Elements 12, I will be particularly interest in whether you are trying to run it on Windows 7, 8, or 8.1 64 bit. So looking forward to your answers to SG's questions in that regard.
    But, I would ask these additional specific questions about the symptoms....
    a. you cite slow startup
    b. what about time that it takes the program to close after you have closed the program.
    c. prolonged times to view new project dialog after you go the route File Menu/New/Project
    In spite of the slow startups (6 to 7 minute...), after the program/project finally opens, is the performance related to import, editing, and export affected?
    Looking forward to your answers to SG's questions. Then for mine if you have time when your discussions with him are concluded.
    Thanks.
    ATR

  • I'm using premeir elements 10 why it keep freezing when i edited my movie

    Im using premeir elements 10 why it keep freezing when edited my movie@

    lakepa
    Order of Troubleshooting...
    (1) Video Card Driver Problem
    Does the computer use a NVIDIA GeForcce video card/graphics card? If so, stop and read the announcement at the top of this forum.
    It describes the Premiere Elements 10 NVIDIA video card driver problem and gives the fix. For your convenience the following is a
    copy/paste of the Announcement. Very important to rule in or out the known Premiere Elements 10 NVIDIA Video Card Driver issue.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing Premiere
    Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling back the video card
    driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow glitches specific
    to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies to you, then the “user to user”
    remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver roll back has
    gone back as far as March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective
    action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    (2) "Movie" Properties
    We need to know the properties of your source media, such as,
    Video compresson
    Audio compression
    Frame Size
    Frame Rate
    Interlaced or Progressive
    File Extension
    Pixel Aspect Ratio
    We could direct you to video and audio properties readout programs, but let us see if we can get the information needed from knowing
    the brand/model/settings for the camera that recorded the video.
    Please check out these 2 important concerns, let us see what you have, and then we can decide what next. The video card driver matter may fix all.
    Do not hesitate to ask if there is anything that you need help to understand what is needed.
    Thank you.
    ATR

  • Problem with print output - gradient fade blocking

    Hi, I am new to InDesign, working on first brochure using CS4.
    Problem occurs with 2 photos and a fade - one photo on left, one photo on right, blank white space in between, I've laid a box over the edge of each pic (jpgs) and used a fade so the photos fade into the white, rather than having a flat straight line.
    Problem is when I print a proof (PDF export, which is perfect on-screen) some of the boxes appear perfect, but some print as a solid box!
    First time I exported as very lo-res, so re-tried at much higher resolution - this fixed the first page, but others still have the problem.
    Tried it even higher res, but still some pages are perfect, and some are not. It seems to be very random.
    I'm also getting this blocking problem with a drop shadow I've placed on basic white text - in the main area of page, and in the footnote.
    Weird thing is that on several pages one box will be perfect, but 2 drop shadows won't be, but another drop shadow is fine!
    I'm printing out a colour proof on a large format solvent-ink (Roland SolJet) printer, (which obviously isn't necessarily compatible, but it's the only colour printer we have with which to proof the brochure).
    I'm hoping that it is simply an issue between the printer software (Roland Colour-Rip) and the file - is this likely?
    Any help/advice is very much appreciated!

    Thanks Peter, I have tried this effect, but it appears very blocky, and leaves a noticeable hardline between the edge of the white space and the edge of the photo.
    I've stuck with the overlaying box with gradient because it seems to be the only way to have a very smooth fade-out, with no hard edge.

  • How do I add animations to titles using premeire elements 10

    I took a multimedia class at my school which used premeire cs4 and i learned in the class how to make titles and pictures move and do animations using keyframes(like moving on and off screen and spinning etc.) also I don't see how to use green screen effects with this software it seems like it really does not seem like elements 10 does not do that much, or is it just my imagination. and while I'm at it can I get Media encoder for free?

    Yes, you can set up keyframed animations in Premiere Elements, just as you can in Premiere CS4. Just right-click on a clip on your timeline, select Show Properties and open the keyframe workspace, as a show you in my books and in my free PDF article "Basic Keyframing" on Premiere Elements support site Muvipix.com.
    http://muvipix.com/products.php?searchphrase=basic+keyframing&btn.x=0&btn.y=0
    The PC version of the program includes a number of Chroma Key effects, including Green Screen and Blue Screen. However, the Mac version includes only Videomerge, a semi-automatic Chroma Key tool. Are you on a Mac or a PC?
    The Media Encoder is included only with Pro versions of the software, not Elements. However, you can output dozens of formats from Premiere Elements. All you need to do is decide where you ultimately plan to display your video.

  • Gradient fades started acting weird. Each new fade removes the previous. VERY FRUSTRATED! Please help!

    Hello,
       I have been using CS5 for about 2 years now and suddenly it started acting up. I do a lot of gradient fading on band photos, i.e fading them into one another. I am a novice at best, but I have a working knowledge of the program. a few weeks ago my gradients started acting goofy. Normally, I could take a photo, fade the edges out to transparent multiple times on the same mask. I.e I could open a layer mask, make all the fades I wanted, and then move on to the next photo. Now, I make a fade, then when I try to make a second, it removes the first.
    This same thing happened to me a few months ago but I can't remember how I fixed it. I have scoured google and gone on an endless search of people having this issue and being told to use other tools, other methods, etc. I know what I am trying to do (and have successfully done it for 2 years) for whatever reason something is tweaked, or a setting changed that won't allow me to. I have reset the gradients, followed the hard key preferences reset procedure, and even completely uninstalled the program from my rig and re-installed. Nothing has helped.
    PLEASE HELP!

    I suspect that you used to have gradient option set Foreground to Transparent, and that you now have it set to Foreground to Background.

Maybe you are looking for