Gradient Mesh - distorted segments with no anchor points

I often run into very strange behaviour with the Gradient Mesh tool, where a line segment becomes heavily warped (kinked, looped or with a hard angle in it) that has no anchor points or control handles to account for the distorted line segment. I've only seen this happen with the Gradient Mesh tool. In my most recent occurrence of this issue I have what should be a gently curved segment between two flat control points, and instead there's this massive "kink" in it that has a hard angle and nearly a loop that has nothing at all to do with the anchor points. There are no anchor points in-between these two (I started with a rectangle and just started adding and manipiulating points).
Anyone else know what I'm talking about and have a workaround or solution? Or even an explanation of why this occurs might make me less frustrated.
t

Thanks for the response, Mike. I checked the surrounding points as a matter of first-line diagnosis, and nothing explains this distortion.
In the image above you can see a "hump" which is not accounted for by any of the handles. The position of both control handles on each side of the segment would indicate a concave segment. The anterior handle of the circled point surprisingly has no effect whatsoever on the segment it is attached to - it is unclear to me what segment it is then controlling.

Similar Messages

Illustrator free distort does not transform anchor points

When using Illustrator CS5 after applying the Free Distort effect, the anchor points remain in the original location. How can I get the anchor points to align to the transformed object?

It is an effect so it does not really change the object. That's why you can always go back and change or delete the effect.
If you want the effect permanently applied select Object > Expand Appearance.

How does logic x deal with audio anchor points?

In logic 9 you access the audio file anchor points via the sample editor. I cannot find the sample editor in logic x. How then do we deal with anchor points?

These two links will give answers to your questions:
http://help.apple.com/logicpro/mac/10/#lgcpcac7b11e
http://help.apple.com/logicpro/mac/10/#lgcpc78843f6
Have a nice day!

How do i get a page with an anchor point come in underneath my header and a static slideshow at the top of my site? Thanks in advance

HI
Im really struggling with this!!!!
I have my header set up and directly underneath I have a slideshow. I want to anchor my :contact me" page to come in just under the slideshow. I cant figure this out for the life ofe me.
Any help will be greatfully received.
Paul

No use at all with Firefox 4. If the search box is left empty "Please fill in this field" is returned.

Gradient Mesh- Coloring individual points

I'm trying to practice on myself using the gradient mesh tool… I understand the point made about making many smaller meshes e.g. eyes, nose, mouth…
I'll start from the beginning…
I open an image of myself >open the layers panel and lock my image…
Create a new blank layer…
Then I select my pen tool…
Start making an outline of my face, approximately 1-3 pixels all the way around the outside…
Then I go up to the menu bar and click on, "Object >Create Gradient Mesh" - 15 rows by 15 columns…
then I use the selection tool and select the whole mesh that was just created…
then set the opacity to 0%…
Using the direct selection tool to select & move anchor points and handles as needed to match light lines…
then I use the mesh tool to select an anchor point to start coloring…
this is where I start to run into trouble…
after selecting my first anchor point to color, I select the color picker tool from the toolbox…
for some reason I'm not able to select that color beneath the mesh (the color underneath the selected anchor point)…
I played around & so far the only way I'm able to select the color beneath is by moving the whole mesh to the side, but… I end up losing the reference point of where that anchor was…
Illustrator CS6
Any help, tips and tricks would be greatly appreciated…
Thank you in advance,
Rob

I ended up watching a video with no sound at YouTube…
What the person did was/sound similar to what you're telling me…
Lock the image layer and create a new layer >used the square tool >added points and move them where needed >while holding down the control key this person clicked on the eyeball of layer 2…
I don't know if your way has the same effect, but… This worked perfectly for me, holding down the control button while clicking on the eyeball…
I'm now able to select the color underneath the anchor points…

Need help with Gradient Mesh

So I am trying to make a gradient mesh of the shape shown here...
But when I apply gradient mesh to it, I get a very unworkable result (as shown below) ...any suggestions on how I can make this?

This is a rectangle converted to a 2-row, 2-column gradient mesh and reshaped. Only nine points to deal with.
Peter

Using gradients with the gradient mesh tool

So I have a basic knowledge of using the gradient mesh tool, but in my current project I need the gradients within the object to fade from black to transparent (it will be used for a one-color tshirt). I've tried to do this a couple different ways. First, I created a solid white rectangle (no stroke) then created a 1 row 1 column flat gradient mesh on it. Added the points I needed, even added the color, and the fade is exactly the shape I need, but I can't figure out how to get rid of the white, and just have the black fade to transparent. I also tried creating a rectangle with a linear gradient fill, clicked expand and selected gradient mesh, but as soon as I press ok it changes it to solid black. I included a cropped picture of what I'm talking about. All the tail feathers need to have that black fade but without the white, it needs to fade out to transparent like the other gradients around it. I put a color background behind the image to make these areas easier to see. It seems like there should be an easy solution, but I'm not sure how to do it. Any help would be really appreciated.

Edit: set all mesh point to black.
Assuming that your version of Illustrator allows it, you can get what you want by adjusting the opacity of the mesh points, something like this:

Join 3 anchor points for "intersection" effect?

Hi,
I'm seriously stuck trying to join 3 open paths with stroke only, into something of an intersection that is dividing 3 pie slots. However I can't join more than 2 of them, as the screenshot below the third one gets left behind, Join command doesn't work Because I have the opacity down to 70% you can see the ugly overlap in the intersection and I need to join all the 3 points for them to look as they should. Does anyone know if/how this can be done in Illustrator?
Thanks!

Laiza,
You can only have 2 segments from each Anchor Point, so you cannot join 3.
You may select the three paths and use Object>Path>Outline Stroke, then join the three new closed paths with Pathfinder>Unite.

Suddenly can't merge any anchor points?

I am busy working on creating a big object with many split ways, you can compare it with the streets of NY or something,
Now the first 5-6 hours went great combining anchor points so it is one big object. However now suddenly Illustrator is giving me an error on mergin anchor points, i do them exactly the same as i did the first 5 to 6 hours?
How can i still merge anchor points, i can't find a solution because it got broken in the progress and not on the start like everyone else their problem with merging anchor points....
Please help me and thanks

theraaf,
I apologize for the figure of speech (end of the line).
What I meant was: You can only join two paths end to end, by end Anchor Points.
It sounds as if you are trying to join the end point (or an inner point) of one path to an inner point of the other, like a road junction or a crossing, and that is impossible.
There can only be two segments from each Anchor Point.

How do you see a clip's anchor point?

When working in the effect controls panel, I would like to move a clip/title's anchor point. However, it doesn't do me much good if I can't see where that anchor point is. In After Effects, there is a dot in the center of the image that indicates the anchor point. Is there a way to make that show up in Premiere Pro CC? Otherwise, I'm just stuck moving the coordinates with no visual frame of reference.

In the effects control panel. click on the Motion effect to select it - then you should see the wireframe overlay appear, with the anchor point in the program monitor.
MtD

Why when I switch between a centre-aligned stroke and fill do my anchor points move?

Hi there, I've been using Illustrator for many years and never noticed this happen before when I fill a shape - can anyone explain why this is happening?
I'm drawing a logo using a centre-aligned stroke, rounded rectangle and another stroked path merged together to make my logo outline....like this...
....and when I change my centre-aligned stroke from a stroke to a fill and back again (to make the shape solid black), the anchor points of my shape move.....after about 10 time so fswitching between fill and stroke, fill and stroke etc my paths look like this....
Why is this happening??? It doesn't do this when I use a stroke aligned to the outside or inside of the path - just when the storoke is aligned to the centre of the path? CAnanyone explain why this happens? what it going on here?
-thanks in advance!
-Pete Moore

No I don't mean 'outlining' a stroke - all I'm doing is changing a stroke'd box to a fill and back again using the 'Swap fill and stroke" button on the main pallet.
When my (rounded rectangle) path has a stroke applied to it, and it has the stroke aligned to the centre of the path, the anchor points of a rounded rectangle move slightly every time I swap from a filled shape to a stroked shape.
If I apply a stroke to a path (again - a rounded rectangle) that has the stroke aligned to the outside or inside of the path, then the anchor points do not move - however many times I swap between fill and stroke.
I've been wondering why when I re-apply a stroke to a filled object (and that stroke is alinged to the centre of the path) - I get slight movement with the anchor points (do it alot of times and it can really mess with rounded corners).
Draw a rounded square, apply a stroke to it (a center aligned stroke), click the 'swap fill and stroke' button (shift + x) a few times, watch the box move slightly every time you click.
-pete

Too many anchor point when brushes expand in CS6

I have recently upgraded to CS6 from CS2. I do a lot of digital inking in Illustrator as part of my job. In CS2 I would create a simple tapered brush using 4 anchor points. When I would draw a brush stroke say with two anchor points, and then expand that brush stroke. Illustrator CS2 would convert the outlined tapered brush stroke back to the the original 4 anchor point path that I had originally created with maybe one extra point if the stroke curved drastically. Now is CS6 illustrator creates that same expanded brush with 9 to 12 anchor points in the path. This makes the program completly useless for my task. Is there anyway to correct this?

Just in case you didn't get it. Here is a link to a brush sample. It's a simple art brush. Nothing sophisicated.
https://www.dropbox.com/s/dyrtw6q2gpu26a1/brush%20sample.ai

How can I use anchor points in Photoshop CC?

I'm using a trial version of Photoshop CC and I am trying to put a formed border around some text. I was able to do this with my other Photoshop program with manipulating anchor points. The CC version is layed out differently. How can I use and form anchor points?

Hi Sheryl. I must admit, I looked at your post earlier, and it was too obscure to get a handle on (did I really just say 'handle'? ). But I think I can see where you are coming from now. Yes, the manipulation of paths has changed a wee bit with CC, but it is pretty intuitive, and a lot of it will still work fine using your old methodology.
Take a look at some of these Julieanne Kost blog posts
https://blogs.adobe.com/jkost/tag/path-selection-tool
I find the most reliable way to make individual point selection work first time every time, is to select the Direct Selection tool > and with the shape/path layer selected, drag a tiny marquee around your target point. You can then click drag that point to edit the shape or path.
But there are so many ways to do the sort of thing you are talking about. If you make a copy of the text layer, and make the lower of the two in the layer stack bigger (Free Transform with Alt Shift) you can then turn that lower text layer into a path or shape to manipulate it.
Or you could add a broad stroke around the text on a new layer. Ctrl click the stroke to load it as a selection, and turn the selection into a path using the icon at the bottom of the Paths panel, and then manipulate its points. If you want to make the stroke a solid filled layer, then I don't know of a better way than dragging a marquee around the inner points wth Direct Selection tool, and hitting Delete.
It's an interesting subject, so please keep asking about anything you are not sure about.

Pen Tool/Anchor Point Help

I often draw/trace things using the Pen Tool. I start with an anchor point (A) then click to make another (B), then I drag the first handle away from the anchor point in order to make a bezier curve. The problem comes when I need to continue the path to another anchor point (C) after the curve. If I don't move the "dragged" handle, then it warps the continued path to the next anchor point (C). What I have been doing to remedy this frustration is switching to the Direct Selection Tool then moving the "dragged" handle over top of the previous anchor point (B). Please tell me there is an easier/faster way to do this...
Many thanks in advance!

Have you studied the manual?
Illustrator Help | Drawing with the Pen, Pencil, orFlare tool
There are also plenty of tutorials on how to use the pen tool.
If you know all this and still need help, please post a screenshot of the situation.

Can you automatically delete anchor points when a new image is placed on top - so that it 'replaces'

Hi all,
I know that I can delete anchor points but I was wondering if there is a shortcut to do it on a larger scale.
Can you automatically delete anchor points when a new image is placed on top - so that it 'replaces' the image, only on the parts obviously that you cover with the new one.
Thank you all

Hi,
I'm using CS6, and I have a tree vector image, and I am trying to put names on top, but when I do this to keep it clean with no anchor points (as my other software cant read it with all the points in it) I have to manually delete each one but it deletes the whole path and I then end up with a tree, names on top, and a big gappy circle around the names.
So really, I wanted to add the names on top, and have that delete all anchors underneath .
Does this make sense? :S

Gradient Mesh - distorted segments with no anchor points

Similar Messages

Maybe you are looking for