Gradient problems with stepping single and full colour

Hi, just wondering is anyone else is having problems on printed
jobs with the gradient having definite steps between the
different tints. We had no problems with CS3, but since updating to CS4 we
have had jobs showing this stepping problem. Has Indesign changed settings?
Any help would be appreciated I have checked all the the PDF settings as our RIP works from the PDF's to create the plates. The RIP is a Harlequin Rip.

GrahamHe wrote:
We don't actually rip the files. We are a pre-press/production department in an Agency. We do ensure that the files we deliver to the printer are 100% clean. Our problem with exporting is that if you have a gradient, as InDesign splits up large images into small pieces when writing the PDF we have seen single images that have different resolutions. We even had one file where 99% of the image was 350 dpi, and a small part 100 dpi.
It could be that CS4 has fixed these problems and am willing to try it out, but am very wary of exporting.
InDesign only splits things up when you flatten, as far as I know. If you use an unflattened format, PDF1.4 or higher, there is no flattening, so the problem may well be in HOW you are exporting. Of course, it sounds like you do ads, and I send flattened ads to publications myself because I don't trust that they know how or have the technology to handle a proper transparent PDF, but I don't distill, and I try to avoid situations that would cause problems to begin with.
Take a look at the Transparency Flattener Preset you are using when you export. I believe the default is [Medium Resolution] which has a gradient resolution of 150 ppi. If possible, save your distiller settings as a .joboptions file and use that to export the same file and compare the distilled and exported versions.

Similar Messages

Problem with step Acquision and subsequnet consolidation

Hi Gurus,
I am trying to do step acquision, problem is as follows.
A Ltd having % of holding @ first consolidation in BLtd 60%.
I have executed COI and posted elimination entries with 60%
In the next consolidation period I have increased my % of holding to 70%
I have executed COI task in the next period, system is taking that additional 10% only for subsequent consolidation.
Not referring old 60% ie 60%+10%=70%
System taking 0.00 => 10.00
Please help me to resolve the issue.
Thanks in Advance
Naveen

Hi,
Normally the COI activities as follows:
1.First Consolidation u2013 Occurs when a new consolidation unit is acquired / established and it is consolidated within the group.
2.Subsequent Consolidation u2013 Occurs when a consolidation unit is already consolidated in the group and the only changes in its equity are due to changes in the retained earnings. In the case of a subsequent consolidation the minority interests in the above mentioned items are posted.
3.Increase or Decrease in Capitalization u2013 Occurs when there is a proportional increase / reduction of the equity and of the participation, without any changes in the percentage of ownership. In the case of an increase / reduction in capitalization, the increase in the stockholdersu2019 equity is offset with the change in the book value of the participation.
4.Step Acquisition u2013 Occurs when there is an increase in the book value of a participant already consolidated and in the percentage of ownership. In the case of a step acquisition, the increase in the book value of the participation is offset with the change in the minority interests. Therefore, there is a reclassification between the minority interest items and the stockholdersu2019 equity items of the subsidiary, due to the change in the percentage of ownership.
5.Distribution of Dividends u2013 For subsidiary companies only
The system is taking only 10% because it is taking only the changes in its equity are due to changes in the retained earnings. Execute balance carry forward then the COI in next consolidation period is in same fiscal year.This should work now.
Regards
CSM Reddy

HT4060 I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual

I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual. The other day, I had charged my iPad overnight so that I could take it to university with me for the day, and when I had switched it on the next day the battery was on 5% and I had not used it since charge.

Your battery may be dying. THey are only good for so many charges/discharges. If you have an apple store near by make an appointment and have them check itout

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

Problems with HP printer and PSE 11 (was bill v)

When using my HP 7020e photosmart printer and Adobe photoshop elements 11, I get a very small white border on the prints. I have set for borderless printing. Adobe says the print size is 4.2 x 6.18 instead of 4 x 6. Any suggestions?

I had already set it to borderless but it still prints a very small white
border. HP had no solution. I am ready to send the printer back to them.
In a message dated 1/14/2014 5:47:22 A.M. Eastern Standard Time,
[email protected] writes:
Re: Problems with HP printer and PSE 11 (was bill v)
created by hyadav (http://forums.adobe.com/people/hyadav) in Photoshop
Elements - View the full discussion
(http://forums.adobe.com/message/6010537#6010537)

Problems with captivate 8 and windows 8

I´m using captivate 8 and windows 8, and I am having problems with the visualization and publication of my projects. For visualization, there is a message of an error with syntax of the files ou directory, and nothing happens. For publication, I can´t see the project published in the browser. It opens only a text file, with the codes. Is there anyone thar can help me with that?

Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

When i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick

Entire JDBC communication stopped if problem with one single JDBC interface

Hello,
Will the entire JDBC communication stopped if problem with one single JDBC interface?
Thanks,
Soorya.

hi surya,
this will happend if u use maintain order at runtime at interface determination.
just uncheck this option if u dont neet EOIO.
if you are getting the problem if u r going for EO then the problem might be using same JDBC channel for all interfaces.
if each interface is expected with a high load then it better to go for dedicated channels for interfaces.
like INTERFACE A should use JDBC A channel and INTERFACE B should use JDBC B channel.
Thanks & Regards,
Rama krishna

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *********

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *******
<Edited by Host>

Hello Khayalh,
You should be able to link your phone number by following the steps in the article below. From your iPhone, sign out of FaceTime and iMessage and then sign back in and it should link. Check in the Start Conversation With and I Can Be Reached at section in iMessage and FaceTime respectively.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
-Norm G.

I am using iPhoto 11 and my library has 736.5mb on disk. I have problems with iPhoto stalling and needing to force quit. I have rebuilt my library. Can you suggest anything else?

I am using iPhoto 11 and my library has 736.5mb on disk. I have problems with iPhoto stalling and needing to force quit. I have rebuilt my library. Can you suggest anything else? Thanks, Rose

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that does'nt help log into another user account on your Mac and try iPhoto from there.

I have a problem with the sound and voice communication programs amplifier

I have a problem with the sound and voice communication programs amplifier

Define "voice of the device."
Are you referring to the ear speaker or main speaker? Phone calls? Rings/alerts? Music?
What troublshooting steps did you take?

I have a problem with my bluetooth and Wi-Fi, it seems not to connect and just keep searching

i have a problem with my bluetooth and Wi-Fi, it seems not to connect and just keep searching

Hello there, charles.
The following Knowledge Base article offers up some great information and links in regards to things that can interfere with both Bluetooth and Wi-Fi:
Wi-Fi and Bluetooth: Potential sources of wireless interference
http://support.apple.com/kb/ht1365
Additionally the following articles offer specific steps for each:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
and
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Gradient problems with stepping single and full colour

Similar Messages

Maybe you are looking for