Gradient to transparent have thin line when stroke is 0 pt

I have a simple rectangle with a gradient that fades to white and has an effect of multiply and opacity set to 85%. Where it fades to white the background image meets the gradient so in effect the rectangle color fades to transparent.
However, even as I have no stroke, 0pt, and 0 opacity on stroke in the effects box there is still a thin line around the box, no matter what I do I can't seem to affect it.
My text is in a separate text frame in a layer on top of this gradient rectangle. This gives me solid color on the text.
How can I get rid of this line around the rectangle? What can give a thin line besides stroke?

No, "Stitching" was not it. Exporting to later pdf-versions didn't help.
When I revisited this problem as I resized the affected text box and the problem reappeared, I decided to cut out the text and delete the old box. Then I made a new empty text box and pasted the text into that. Problem gone!
I still don't know what the problem was as I could find no stroke nor any effects related to this box. I'm going to open the original file later and delete everything but the affected box just to see if there is some setting somewhere not so obvious.

Similar Messages

  • I have vertical lines when printing even after changing cartridges.

    I have vertical lines when printing even after changing cartridges. There are no lines when copying, faxing or scanning, only printing. I have cleaned the glass, scanner and even dusted where the toner cartride slides in.  Any suggestions?

    Sorry but I have worked on laser printers for over 20 years and never encountered your issue.  That is of course if you are explaining it correctly.  When you make a copy to be printed or print a reports page from the printer or send a print job to the printer, if in all these cases you get the line, then yes the issue is either the toner cartridge or the fuser.  If you make a copy to be printed and it prints without the line (Put original in adf, press copy button and print should come out), then you have one weird unit since it does not make sense since the print formatter on the unit whether making a copy or printing from the computer or unit itself uses the same hardware.  Now to test if the printed copy has a line then just put a sheet of paper on top of the feed tray and do a self test from the printer.  When the back edge of the paper enters the printer, quickly open the toner door to stop the printing.  Remove the toner cartridge and look at the image below.  If the defect is present the toner cartridge is the issue and if the image below does not have the defect, then the fuser needs to be replaced.  Best I can do.  Good Luck.

  • I have horizontal lines when printing from my MacBook Air. Its nothing to do with my printer, as am now on to my third new printer, having returned the other two, saying they were fault. Now I know they weren't. Its got to be something to do with macbook.

    I have horizontal lines when printing from my MacBook Air. Its nothing to do with my printer, as am now on to my third new printer, having returned the other two, saying they were fault. Now I know they weren't. Its got to be something to do with macbook. I feel really guily about taking the other printer back, when it was fine!!

    Which MBA, which printer? Printer incl driver properly installed? Printed test page (yes, THE test page, not something else) and it looks okay?

  • Print outs have thin border when -default-background-color is set

    Hey everyone.  In my application the print out have this very thin border.  The -default-background-color is set to #333333 (dark grey) and this is the problem.  When I set the color to #FFFFFF (white), the thin borders go away.
    When I set the default-backgroun-color to #FFFFFF, my loading screen is white.  I don't want that.
    Does anyone know how I can have my loading screen with a #333333, but not have the thin border lines around my print outs?  Setting the border properties on the printed component doesn't work.  The problem is with the background color.
    Thanks for reading.
    Tom

    Still hacking away at this problem.
    I thought I had the fix until I deployed the AIR application.  Setting the -default-background-color to white worked fine when running from flex builder, but when I installed the application.  The "borders" are still showing.
    Has anyone had any experience with this?  I'm printing Point of Sale receipts and they look like crap with these lines around them.  On top of this, some printers print differently.  The HPs print a border around the whole component. The Brother printers just print the left and right.  One of my customer's printers just prints the bottom and right borders.

  • Scanned Images Have Yellow Lines When Using the HP 2400 Scanner

    I have a HP 2400 scanner. The scanner was working fine on Wednesday, Sept. 10. I tried to scan a photo (Jpeg) and a document (PDF) but there were yellow lines going through each item. I reconnected the scanner and attempted to rescan the photo and document. The yellow line still appeared. Please let me know what I can do to correct the problem. 

    Hello there,
    To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - Scanners.
    Enjoy your day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Unwanted lines when using effects.

    Having much trouble with unwanted thin lines when using outlined text with multiple effects - outer glow & bevel and emboss. Typically the lines show through the outer glow effect in the color of the background. It is then especially noticable with the darker background I used for this layout. The lines are not visible on screen but show up in printing. I have also tried saving as PDF and then printing but no difference.
    Here is a scanned portion of the layout.
    Any help would be greatly appreciated!

    The transparency flattener preset was set to medium resolution.
    If it's transparency stitching then the flattener preset you use in the print driver would make a difference. Try High resolution or make a flattener preset that has a heavier raster balance. Here's a flattened PDF/X-1a test with low res vs. a customized high res:
    The custom flattener on the left has no stitching at any zoom view

  • I have Windows Vista and have tried everything! My Ipod Touch has Malfunctioned and cannot be recognized by Windows or Itunes! When I turn my Ipod on the white apple comes on and the 15 seconds or so after that a thin line comes on the screen above it.

    A thin line appears above the logo then the loading sign pops up and then the whole thing freezes! I read somewhere to hold the home button and then plug in the usb will help it be recognized by Itunes or help to restore it! I tried that it didn't work.I tried uninstalling Itunes and then re-installing it. I have the newest version of Itunes and don't know what else is left to do? can someone please help?
    Thank you for reading!

    Try placing the iPod in recovery mode (I think that is what you were try to do) and then try to restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • I have a line drawing (black on white paper) i have scanned and need to make the white paper transparent, maintaining the line drawing, can i and then HOW can i do this in PS?

    i have a line drawing (black on white paper) i have scanned and need to make the white paper transparent, maintaining the line drawing, can i and then HOW can i do this in PS? this is for my business logo. ive used it for years but with a solid background. id like to have it just be the drawing over my photos with a transparent background.

    First let me apologize for posting a reply that was only suitable for advanced users.  Photoshop is broad and powerful therefore has a huge learning curve.  In fact I would state no one knows and uses all of Photoshop.  When we first get Photoshop it intimidate us and we're very uncomfortable using it.  Many thing are not intuitive there in much learning involved.  After some time we begin to know something and we are able to do some thing.  Learning become rapid and we start playing in Photoshop.  It is very important to play with Photoshop.  Playing with Photoshop and asking for help with in forums like this IMO is the best way to learn. 
    Photoshop Power lies in layers, selection and automation.  However it takes knowledge to use photoshop well so most powerful tool you have ins Photoshop is the gray matter between your ears.  Most at one time or another want to watermark or put a logo on their image.  So its best to automate this process. All run into a problem in the process. "Size"  We find our assets vary in size and aspect ratios. Landscape, Portraits, Panoramas and others. This complicates automation.  Vector graphics works best when size vary greatly.  If you can not work out how to create a vector solution like a custom shape.  Create your Logo and watermark large thing scale down better the up. Text scale well for text uses vectors graphics however if you rasterize text it will not scale well.
    I do not type or do English well so let me do some screen captures.  I can not stress enough how important Black, White, Grays and Blending is when it come to image processing.  Become friends with Multiply, Screen, Overlay and Luminosity blending.....
    However when there is a white or black background though you can blend them you can not add a style like a drop shadow, emboss or make it invisible setting fill to 0 so only the style is visible.  When there is contrast between the logo and background it is easy to separate the two. To select the background and delet it to have the logo with a transparent background.  Many tools can be used to create the selection hee I use my action kill white.
    Vector Shape would work better for scaling However it would be best to create the logo from scratch in a vector program like illustrator but I never had the resources to justify the Creative suite. I only had Photoshop.  Recently Adobe gave me and other a year subscription to the creative suite for our participation here.  I still have not installed anything but Photoshop,  A while back I found a program that can create vector patf for black and white art work.  It will not be as good as using something like illustrator. However vector paths can be edited in Photoshop and cleaned up some. Here is the PSD it 13MB because od the gradient http://www.mouseprints.net/old/dpr/AmPm24-7.psd

  • Why do my high resolution pdfs have thin white lines all over them?

    When I make high res pdfs to send to the printer, they often have thin white lines in them that seem to be very visible when they are displayed in email. This panicks my clients. When the files are opened in Acrobat, they look OK most of the time, but sometimes they still have the white lines. What causes this and how can I make it STOP!!! It is driving me and my clients nuts.
    I am using Acrobat 8 Professional on a iMac OSX 10.6.8. My files are pretty standard for print pubs. They usually contain type and images, and the images get the white lines where the text boxes are in the source file. It is maddening.

    I forgot to say that I am creating source files in AI CC if that makes a difference, but I have had this problem in the past with previous versions of AI.

  • Thin lines on PDFx1a  have printed on final job!!!

    We recently produced a final print PDF for the front cover of magazine and all was well. No Lines as normal.
    However, when this same PDF of cover was placed back into Indesign as part of a promotional poster, the final PDF appeared have some thin lines in 3 places. They were visible when PDF was viewed at 800% and above, and we initially thought that they were part of the 'Atomic Regions' set out by the flattening process.  Anyway, these lines have printed and now we are wondering how to avoid this in future
    As I say it only appears to happen when placing the Cover version of PDF back into Indesign file and a new PDF is created.
    Does anyone know how to get round this without rasterizing PDF and changing to a bitmapped image. After all we want to keep all vector items as original cover, as poster  is quite large.
    I look forward to a reply
    Many thanks,
    Scratchy Head  Man

    Take it to an Apple Store or other service provider for testing.

  • We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had t

    We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had to go outside to get reception without dropped calls. I was told that because of metal in my home I would have to purchase a Network Extender for $250. And we HAVE not metal in our home. AND our other lines all work fine. I felt this was ridiculous. We already pay $350+/month for service and I should NOT have to purchase additional equipment for a service that I already pay for. The manager of our local store at the time gave us at no cost a Samsung Network Extender. It worked beautifully until about a month ago. I went to our local Verizon store and was told that I would have to purchase an extender. THIS is RIDICULOUS. We have been loyal customers for over 7 years and have been very satisfied with our service. Unless this issue can be resolved without purchasing an extender we will be switching our service as our lines come up for renewal. I regret this as we have been very happy with our service. But we should NOT have to purchase anything extra for one line that will not get good reception. Again, we pay $350+/ month for a service that does not work properly, simply RIDICULOUS! Currently the "sys" light flashes red (slow) and the GPS light remains red. Please help this very frustrated customer.

    Regardless with what carrier your with you might have the same issue, My recommendation would be to get a router that will help you with viewing live traffic and keep a tally of your usage and any device connected to your internet connection.  You can go with the peplink balance 20 and be able to look at your traffic by the hour, daily, weekly, monthly or yearly.  Look for trends, see what computers or devices are doing what I attached a screen shot so you can see an example of mine.  You can purchase the router at 3gstore
    http://i45.tinypic.com/6zc674.jpg

  • I have updated on line when I was prompted to do so, and now my phone won't turn on it just shows the itunes logo and the usb plug on the screen  What do I do to get all my icons and everything back to normal. i will lose info if I hit the restore button.

    My phone is not coming on except for the usb cord showing in the screen with an Itunes logo after doing an update that I received on line when putting my phone into the station for the night, I saw that there was an update so I said yes.  Then this happen.  Could someone please help me here, because I do not want to restore or I will lose everything I have with numbers and music in my library.  Please advise and respond to me.  I use my phone for work as well and can not get the contacts up or anything except for this itunes and usb showing on the screen.
    Thank you,
    Diana

    Hi there briana_webb82,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    -Griff W. 

  • I'm using a pc, (windows 8.1,) and I cannot get a thick and thin line with CS6. None of the brush tool settings have any effect, even in the preview. Is there a setting I need because I'm using a pc?

    I'm using a pc, (windows 8.1,) and I cannot get a thick and thin line with CS6. I want to draw, but I cannot get any linework like I should. I also use Sketchbook Pro, and ToonBoom, and I get wonderful linework. But not with Photoshop.
    None of the brush tool settings have any effect, even in the preview. Is there a setting I need because I'm using a pc and not a mac?

    Thanks for your response,
    I'm using a Fujitsu T901 laptop, with a stylus pen. Painting works great in Photoshop, but for drawing there is no sensitivity at all.  Frans Vischer
    author and illustrator of Fuddles, A Very Fuddles Christmas and Jimmy Dabble
    www.fransvischer.com
    pamperedfatcat.wordpress.com

  • The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?

    The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?

    Take it to an Apple Store or other service provider for testing.

  • Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it

    Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it.
    This happens only when a load my pdf file on my server, because if i click on the link when the file is on my iPad, the page opens without problem.
    Any help please?
    thanx

    the % sign is often used when there's a space in a name. HTML doesn't like spaces so it fills them with % or %20
    try, on the end of that link, see if there's a space built into the page or the link when the page was made
    On the web address you may be able to 'backspace' at the end and erase that space to get the address, but whomever made the page possibly put a mistake in the link

Maybe you are looking for