Gradient Tool difficulties with the mask and banner, CS4

Hi everyone,
I know this is quite basic, but I'm experiencing a mind block.
I'm trying to make a banner image fade out to the left into a white background (which has text, this is the rest of the banner) losing as little as the image as possible, it has to be done with a mask as I don't want to edit the original image.
I don't think feathering works
At the moment I try this, I put a mask over the banner image, the mask is longer to the left than the banner image. But then when I try and apply the gradient tool to the mask it just slaps it on the image itself making it go all white.
I've been using photoshop for a while now, just my brain isn't working properly today. Any help appreciated. Thanks

Try this. First make sure your text is on a layer or background and the image that will be transparent is on another layer above the background with the text. If you already have a mask showing in the layer that will be transparent, just right click on it and choose Delete Layer mask. Then create a new one by clicking on the "Add Layer Mask" button at the bottom of the layer's palette (resting mouse on button shows the name). Press the g key on your keyboard to get the Gradient tool, and to make sure it is working as expected right click on its icon in the the tool options' bar that is at the top left under the main menu and choose Reset Tool. Then make sure that the foreground color swatch at the bottom of the Tools palette is black (to ensure that press d key and if necessary x to get that). Next hold Shift and drag from left edge of the image that will be transparent all the way to the right edge. Now you should have the fading transparency, for additional control while at that step press Crtl + L on your keyboard and drag the arrows of the Input levels there to adjust the gradient as you like.
Hope this helps

Similar Messages

  • How to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

    how to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

    Because it was not possible to apply a gradient to a stroke in CS5. When you open the file in CS5, it is reduced to something that can be rendered in CS5.

  • I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

    I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

    I have had this problem for close to a year. I have an Extreme base station, two Airport Express's and multiple G4 Mac's with up to date software. I have spent a huge amount of time trouble shooting, resetting, reapplying software and finally calling Applecare without any help. It would be great to get this problem solved.
    Powerbook G4   Mac OS X (10.4.7)  

  • Lightroom 5.2 my clone tool is stuck with the scissors and won't clone a spot. How do I get rid of the scissors?   HELP!!!!!

    My clone tool in Lr is stuck in the scissors mode. How do I get it back to normal clone function.
    Spending hours with this FRUSTRATION.
    CAN SOMEONE HELP ME?

    DOWNLOADED 5.7 CAN'T POST CLIP BECAUSE WHEN i LET GO OF THE ALT KEY THEY DISAPPEAR.
          Fr5.7om: Bob Somrak <[email protected]>
    To: Cat Anders <[email protected]>
    Sent: Sunday, February 15, 2015 5:22 PM
    Subject:  lightroom 5.2 my clone tool is stuck with the scissors and won't clone a spot. How do I get rid of the scissors?   HELP!!!!!
    lightroom 5.2 my clone tool is stuck with the scissors and won't clone a spot. How do I get rid of the scissors?   HELP!!!!!
    created by Bob Somrak in Photoshop Lightroom - View the full discussionFirst thing to do is update to LR 5.7.1.     No use trying to solve a problem on an outdated version. BTW, could you post a screen clip of these SCISSORS? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7197183#7197183 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7197183#7197183 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Brush Tool Error with Layer Masks

    I've identified a layer mask bug in Photoshop 14.2.1 for Mac. When working with non-vector layer masks, the brush tool will not paint a darker value than the white level present in the mask. For instance:
    when a layer mask is created from the icon at the bottom of the layers window, the mask itself is white, representing full visibility in the masked layer. If you attempt to use the brush tool with 100% black (to actually mask something in the applicable layer), it does not function. I am able to use the paint bucket tool and the pencil tool to fill black in the mask, but not the brush tool. If the mask is 67% grey, and my brush tool is set to 66% grey, it still will not affect the mask; the white level cannot be decreased, only increased with the brush tool. Bug!

    Sure. A mask is just a greyscale image and the blending mode is a property of the brush tool not the mask.
    It is actually a very useful feature especially for extracting hair. When painting with black/white in overlay mode you can easily clean up the edges without affecting the pure black/white parts of the mask.

  • I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

    I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
    If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

    Hi David-
    The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
    http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

  • My scrollbar on the right side turned black, with the update, and I can no longer see the position marker to grab it and move up and down

    This didn't happen until Firefox 11.0. The scroll bar is there, with the up and down arrows, but everything in-between is black, and you can no longer see the mini-bar within to move the page.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How do i save a calender i have created with the photo and the dates saved on separate pages?

    how do i save a calender i have created in photoshop with the photo and the dates saved as two separate pages?  when i save as pdf or jpeg they are authomatically saving 1 pg with the photo and dates on one page.  This is causing problems when i print.

    Hi there, in case your printer cannot print very large, you can also crop down two versions and print them as separate documents.
    1) Create a guide where you would like to split the pages by clicking on the ruler (hit command R if they are not showing) and dragging to the desired area.
    Creating the guide will make it so you can be precise in the way you split up your page, and so that no part of the image will be repeated or lost.
    2) Select the Crop Tool and fit the crop area to the top half of your calendar, using the guide you've just made to snap to the right spot. Hit return to finalize the crop.
    3) Go to File > Save As. Name the file something like calendar_top and select the desired file format. Hit "Save."
    4) Once you get back to your calendar file, Go to the History panel and select "Drag Guide." This will take you back to the step before you cropped the image.
    5) Repeat the steps as before for the bottom half of the calendar, once again using the guide to help you make your crop area.
    So then you would just print each of the two pages individually. The images will not be contained within one document, but if you have Acrobat you could combine the files.
    I hope this helps!

  • Hello, failing miserably here,  cant import nef files from aperture 3.1.2 to iphone 4.  I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's   Anyone out there to aid this frustrated photographer??

    hello, failing miserably here,  cant import nef files from aperture 3.1.2 to iphone 4.  I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's   Anyone out there to aid this frustrated photographer??

    See my reply to a later simplified version of your question. I don't think that either iPhone or iPad recognize RAW files such as NEFs. And the iPhone is not designed to be a mass storage device like a portable flash or portabel hard drive for temporary storage of files, if that's what you're after.  As I mentioned in my previous reply, I have an iPad and have been experimenting with it as a tool for photography, hoping that it would be a nice travel tool for backing up and viewing photos from my Nikon dslr. But both the iPad and iPhone just are not set up to do that well. Both show photos nicely, but organization of photos is very frustrating since you can't create albums on the iPhone or iPad, but only back on your sync computer. (There is one very powerful photo organization app called SortShots, but you import photos to it and it organizes and stores the images wtihin the app not using the native photo app. It doesn't work with NEFs either.) I don't know of any RAW processing software for either device.

  • Red highlight next to code in dreamweaver. What is wrong with the code and is it affecting the websi

    What is wrong with the code and is it affecting the website?

    Line 107 looks dodgy to me and it won't have any effect on your code.  However, it is a good idea to post a complete link to your CSS for us to see it in full and to validate it using external tools.  In fact, you could validate the CSS (and HTML) yourself..
    <http://jigsaw.w3.org/css-validator/>
    Good luck.

  • My MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further. What to do?

    my MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further.
    What to do?
    Does that mean that the is the end of my Mac Book 5bought in the summer of 2009) ? Or is there someting to do to fix it?
    Thanks
    V

    Try this:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • If we all file complaints with the BBB and the FCC maybe things will change

    I filed complaints with the BBB and the FCC over the last round of delayed updates. I got a call from someone claiming to work in the President of VZW office. It sounded like complaints to the BBB and the FCC cause major headaches for the folks at VZW and all they wanted me to do was remove my complaints. I refused until my phone was updated then I notifed the BBB and the FCC that my issue had been resolved. I just filed another round of complaints on Monday. Maybe if everyone else who is tired of the same old ** from VZW files complaints then they might take our issue seriously. I doubt it but at least we'd be making things difficult for them.

    carseller0822 wrote:
    I filed complaints with the BBB and the FCC over the last round of delayed updates. I got a call from someone claiming to work in the President of VZW office. It sounded like complaints to the BBB and the FCC cause major headaches for the folks at VZW and all they wanted me to do was remove my complaints. I refused until my phone was updated then I notifed the BBB and the FCC that my issue had been resolved. I just filed another round of complaints on Monday. Maybe if everyone else who is tired of the same old ** from VZW files complaints then they might take our issue seriously. I doubt it but at least we'd be making things difficult for them.
      And if enough people do this, do you know what is going to end up happening? Verizon will never update any of the phones, you will be stuck with the OS that was shipped with your phone. Is that what you want?
      What are you complaining about in the 2nd round?

  • I have a iMac (20-inch, Mid 2009). On start up It will sit at the White screen with the logo and the wheel that spins under it. It will not go past this point? Any ideas?

    I have a iMac (20-inch, Mid 2009). On start up It will sit at the white screen with the logo and the wheel that spins under it. It will not go past this point? Any ideas?

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    b. Boot drive's directory has been corrupted - Repair with Disk Utility.
    c. Critical system files are damaged or deleted - Reinstall OS X.
    d. The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • How can I print with the black and white cartridge only?

    I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
    The printer is out of ink.
    The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
    How can I print with the black and white cartridge only?
    Mac OSX 10.7.3
    HP Photosmart C7280 (7200 series)
    This question was solved.
    View Solution.

    I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!!  I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
    You should be ashamed!!

  • Hello, we have both Creative Cloud and Creative Cloud for teams. Can you help me with the difference and if i need to have both?

    Hello, we have both Creative Cloud membership and Creative Cloud for team. Can you help me with the difference and if i need to have both? We have 9 employees that are using it. Just not sure if i'm paying for something i don't need.
    Thank you

    Please refer to Creative Cloud Help | Creative Cloud / Common Questions
    CC is for retail use with 20 GB of storage space, CCT is where number of seats are purchased & assigned by one program admin where each seat gets 100GB of storage space.
    You can not have both the CC & team in one account as it will only provide you added storage space of 120 GB but you can activate the CC any of them or either of them twice as CC is based on Adobe ID.
    Regards
    Rajshree

Maybe you are looking for

  • LCD for Color Grading

    I'll need to dive into Color when I finish editing my one-hour long documentary in a couple months. The doc is intended to be shown on a large theatre screen one time, then broadcast on community-access television and lent through our regional public

  • Need help on efficient searches using hashes on large #s of data structures

    I have a massive amount of data and I need a way to access it using generated indexes instead of traditional searching such as binary chop as I require a fast response time. I have 100,000 Array data structures each containing roughly 10 to 60 elemen

  • I just installed Lion OSX. Where can one find the "domain" for iWeb?

    With Snow Leopard one could find the "domain" for one's iWeb in Admin+Library+application support+iWeb. When one changed computers, one simply had to save this domain and then put it in the right place in the new computer. Things have changed with Li

  • Safari wont load any HTTPS sites

    Hey, For some reason Safari has stopped letting me open any https sites. I am using a new internet connection at my new apartment, but I think everything else has stayed the same. HTTPS sites open fine in Firefox and Explorer. I tried emptying my cac

  • Questions modifying the Personalization Portal

    Hi there, I have some questions regarding the customization of the Personalization Portal: I got the MailAdapter working, but how do I prevent the Portal from displaying the Password Input-parameter when entered in the Form? Shouldn't there be an add