"Graduate- interval scale" i.e. Scale type D, Can it cover the many SO qty?

Hi All,
*Business wants, the Sales Order qty entered in many sales orders to be considered and given the Graduate -Interval Scale for the line items, but as per my testing this applies only for single line item in that SO!
If any one knows this can be met somehow, please share your ideas?
u201CGraduate- interval scaleu201D i.e. Scale type D, this needs to be maintained in condition type customization only!
e.g.: (For Customer/Material Disc. with condition type: K005) the Scale is set as below;
to 100 Qty 5Rs/ea Disc.
to 200 Qty 10Rs/ea Disc.
to 500 qty 12Rs/ea Disc.
If Iu2019ve two SO,
1. 23456 with Disc. line item qty as 50
2. 23457 with Disc. line item qty as 150,
The Scale should apply accordingly, i.e In First SO, for 50 Qty the Disc should be 50*5= 500 Rs,
And for Second SO, out of 150, first 50 qty should be applied with 5Rs Disc. and remaining 100 with 10Rs Disc.
Hope you understand the requirement here, let me know so that i can explain you more in case required.
The above request holds good if the single SO with one line item in it. but not if 2 SO thereu2026
your feedback much appreciated, Thank youu2026
Best Regards,
Sid.

Hi,
The Graduated Scale type configuration will not solve this requirement.
It can be handled with a 'Alt Cal type' pricing routine.
With Regards,
Karthik

Similar Messages

What data type I can use if the text is more then 4000 varchar?

Dear all,
What data type I can use if the text is more then 4000 varchar?
Please advice,
Amy

You didn't specify if you are referring to tables or code.
In tables the limit is varchar2(4000) so anything bigger will need to be stored in a CLOB (as already mentioned).
In PL/SQL code you can defined varchar2 up to 32K so varchar2(32767).
;)

HH3 Type A can't tell the time

Currently on HH3 number five, this one is Type A and has been running for about a week with reasonably consistent speeds until this morning when it had dropped again when I tried to restart it nothing happened. Tried switching on/off still nothing just the orange power light. Hit the reset button which woke it up. Checked the settings and it was showing the date as 01.01.03 and time at 01.00. Set it to take date/time from the internet but it shows the time one hour slow.
My question in short is why can't the thing tell the time?????????????????????
Solved!
Go to Solution.

See http://community.bt.com/t5/Other-BB-Queries/Clocks-Forward/m-p/574269#M26367
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

From browse button of input type=file, can I show the content of a file

Hi all,
I am using, input type=file, where browse button appears. I am having a text area. My requirement is after I select the browse button, I need to show the content of the file in the text area. As of now I 've handled by having another button 'show', which should be pressed after browse done. But, How to handle it in the browse button itself, how will I get that action event from browse button. Plz help.
Regards,
Sam

I think someone asked a very similar question here,
http://forum.java.sun.com/thread.jsp?forum=45&thread=501889
check the thread, it may help you.
-S-

Query: Scale type D (pricing)

Hi all,
In pricing, Whats the diiference between the scale types B (to scale) and D(graduated to interval). Can you pls explain with an example?
Thanks.

Hi,
Pricing Type B: Thourugh this system will take the pricing upto the value that is example
Sales Order
Materiak   Quantity    Price
XYZ            50         15000     (50* 300)
Condition record in VK11
to 10          100/-
to 30         200/-
to 60         300/-
Pricing Type D:
Please go through the below link for better understanding
http://help.sap.com/saphelp_47x200/helpdata/en/93/7432c4546011d1a7020000e829fd11/frameset.htm
Regards
Goutham

Regarding Scale Type

Hi ,
i am working on Pricing condition types. i have doubt in scale types.
In scale type drop down Option " D " is there
Graduated-to interval Scale .
can anybody explain what is the use of this scale type and in what kind situations i can use this . please help me to work out on this .
Thanks ,
srikanth .

Hello Srikanth,
The following post will clarfy you question:
Query: Scale type D (pricing)
Thanks,
Jignesh Mehta

Scale type D for group conditions

Hi all,
I am creating a new group condition and am trying to make it scale type D - graduated-to-interval scale. However because this is a group condition, SAP is giving me an error (Scale type 'D' cannot be used for group condition 'X').
What is the best solution to this?
I would like to give discounts based on:
Sales quantity:
1-100 = 15% off
101-200 = 25%
201-300 = 35%
301-400 = 45%

Hello
This is b'coz your condition type with active Group condition Indicator. That means, here the system calculates the basis for the scale value from more than one item in the document.
So, the scale D maintain in Scale basis for those condition type, does not go with it and throws an Error.
Thus, if you want to scale functionality for condition type with group condition indicators use GrpCond.routine to maintain routine.
Routine number for creating group key identifies a routine that calculates the basis for the scale value when a group condition occurs in pricing.
For instance.
Check routine 3-Mat.Pricing Group. This is an example of a structure of group key formula. A structure of group key formula can be used to influence the basis the system uses when reading the scale of a group condition. The formula is assigned to a group condition type in customizing.
Formula '3' adds up the quantities / values of all of the line items in the sales document that have the same material pricing group (field KONDM) as the current sales document line item.
A company defines a particular discount (condition type Z001) with scales based on weight. When a sales order line item is priced that is eligible for the Z001 discount, the user would like the system to read the scale with not just the weight of the current line item, but the combined weight of all items in the sales document that have the same material pricing group as the current line item. To accomplish this, the user defines condition type Z001 as a group condition and assigns structure of group key formula '3' to it in customizing.
I hope this assist you.
Thanks & Regards
JP

Scale Types in condition types customization?

Dear ALL,
In spro in "define condition types" in MM we have to assign the type of Scale whether FROM ,TO, NOT USED, INTERVAL etc.. to PBDD, AMO2 etc. Between Scale types i.e. FROM (BASE) Scale and TO Scale what are the differences? What is the concept behind these types of scales?
Thanks

From to TO Scale means
If your price with vendor is like , If you buy
up to 1000 quantity you get at $ 1.00 a PC
> 1000 you get at $ 0.95
> 2000 you get at $0.85 like wise you can define the scale...while PO creation based on the quantity system will pull the price.
Rewards the points for helpful answer

Graduated Price Scale in an MM Contract

In ECC 6.0 we are looking to enter a pricing scale condition in a contract to put in place a discount once we hit a quantity across all our release orders.
For example, after we by 1,000,000 the price drops dramatically. There is a contract for the part with a vendor with many release orders that are summed to determine when we hit the 1,000,000th part.
Graduate price scale conditions work for individual purchase orders, but we haven't been able to get the price scale to work for the contract so that the release order with the 1,000,001th purchase is at the lower price.
Does anyone know how to implement graduated scale pricing for the purchasing contract?

Std SAP does not support this kind of solution but you can acheive with custom solution of wrok around is
make the contract with two line items having same materail and conditions except the price for second line should be the price you pay after 1000000 qty
in your case you can create contract for material with first line
is qty 1000000 @ $10 and the second line
enter any number of qty with discunted price so when you create the release order always use first line upto you reach the maximum limit and than use line item 2 for all remiaining orders.
I know this is not straight forward solution but without custom developement oyu can work only this way because in MM the accumalative functionality like SD does not exist.

Scale type in condition type

Hi,
What is the importance of scale type in condition type.Actuly I want to know that how we use scale type in condition record.Please explain this with example.
Regards
Prabudh

Hi,
can u do a small search in this forum, todad morning also there was one posting regarding the same.
Scales
A scale in a condition record where prices, discounts, or surcharges are defined for different customer order quantities or values.
This scale is used by the system to determine the price, discount, or surcharge for a given quantity or value.
This is defined in the each condition type
spro--> img>sd->basic functions> pricing>pricing control->define cond type--->select any one condtion type eg: PR00--> come down u will find scales views.
scales basis:
depending upon the scales basis the prices are determined according.
example:
A company want to give discount based quantity scale ie, if customer buy 10 pcs the prices would be 100/ unit & if he purchase more than 20 the prices would be 80/unit.
So in scale basis u have to select quantity scale. & the prices aganist teh qunatity will be defined in condition record maintanenace (tcode:VK11). The other sclaes basis available are
B Value scale
C Quantity scale
D Gross weight scale
E Net weight scale
F Volume scale
G Scale based on a formula
L Point scale
M Time period scale - Month
N Time period scale - Years
O Time period scale - Days
P Time period scale - Week
R Distance
S Number of shipping units
T reserved (IS-OIL, time prices
X reserved (IS-OIL, day prices)
scale formula:
here there small routine is predefined to determined of scales
hope this helps u
regards,
Arun prasad

Pricing scale type ??

Dear All,
pricing scaling question ??
When scale type which controls the scale value is set to "A" (Base-Scale).
we need to set the scales From a certain quantity or value,
My question is, what happens if the customer order less that value.
Eg :
my scales are set as
FROM 10 100 USD.
what happens, if customer order 2 qty. What price will he/she will get.
Thank you .
Thank you.
Anitha.

Hi,
The price will be taken from the base price if the order quantity is less than the scaled quantity.
Initially,the system will check for the Scales.As our quantity is less than the scales,so it will check for the base price.
Suppose your quantity is 2 and in the condition record,you have set 30 USD per 1 EA(your Unit of Measure).
Then the system will caluculate 2*30=60USD for this condition type if the date you are creating the order is with in the validity date.
Else if no record is maintained,then this condition type value has to be entered manually,if this condition type is set as mandatory.
If it is not mandatory,then you can ignore this one.
Regards,
Krishna.

Use of Scale Type D

Hello Gurus,
I wanted to use scale type D for one of my scenario
The details are given below
I want to divide the share of revenue betwen my client and his JV partner.
I created a condition type ZBAS - for basic rate * quantity. This condition type is statistical
this total amount will be distributed between client and his JV partner
For claint share I have condition type ZCI1 -60%
For JV Partner Share I have condition type ZCI2 - 40%
My Scenarios is when my rate is 10,000
then ZCI1 - 60%
ZCI2 -40%
When Rate is 15,000
ThenZCI
upto 10,000 - 60%
from 10,000 -15000 - 55%
ZCI2
upto 10,000 - 40%
from 10,000 -15000 - 45%
I tried to use the scale type but I am not getting correct values. System is not determining the 60% for value upto 10,000
Appreciate your inputs
Thanks
Narayan

HI
check the below links
[Re: Scale type D|Scale type D for group conditions;
[Re: Pricing scales|Pricing scales;
Regards,
Prasanna

Scale Type of DAQ virtual channels configured using MAX

I configured some analogue input and output channels using Measurement & Automation Explorer, under Data Neighborhood. One of the attributes I could change is called "Scale Type". I'm wondering what it's for, or where I can find information about it. Thanks

Amyz,
The most helpful document I found was the DAQ Channel Wizard Tutorial: http://www.ni.com/support/labview/toolkits/chanwiz/. Step 7 of analog input or output briefly describe the scale modes. Good luck with your application.

In Captivate 8, how do I insert a text animation. It is grey scale and therefore can't be selected. I also want to use a "typing" effect.

In Captivate 8, how do I insert a text animation. It is grey scale and therefore can't be selected. I want to use animation and also want to use a "typing" effect.

Hi there
What is your project type? Responsive? If so, that's why animation is disabled. Animations are usually built in Flash and Responsive output doesn't "do" Flash.
Cheers... Rick

I'm trying to print from a full size 30x42 pdf of an AutoCAD file. I only want to print an 8 1/2 x 11 portion, in scale. How do I select the window and print in scale on my 8 1/2 x 11 printer?

I'm trying to print from a full-size, 30x42 pdf of an AutoCAD file. I only want to print an 8 1/2 x 11 portion, in scale. How do I select the window and print in scale on my 8 1/2 x 11 printer (Brother MFC-9340CDW)?

You might be better off contacting an AutoCAD support group.

"Graduate- interval scale" i.e. Scale type D, Can it cover the many SO qty?

Similar Messages

Maybe you are looking for