Grafics problem on mac osx lion with intel hd
i have some grafics problems in some games like dragon age 2 or assassin's creed on my MacBook Pro 13" (early 2011). in dragon age 2 yellow and red effects became blue and green after the upgrade (like blood), and playing assassin's creed 2 is quite "impossible" because all characters, horses and so on, appear all green and red (but i have to mention that they games run faster since i upgraded to lion ). is there any sign of an update for intel hd grafics?
No, OpenGL Swap Buffer support (Level 1) support for the HP4000 is for Windows only. Level 2 and 3 support is not available either. You'd need a more powerful NVIDIA card for Level 1, 2, and 3 feature support.
More info here: http://helpx.adobe.com/after-effects/using/rendering-opengl.html#main-pars_header_3
Similar Messages
-
GPU in after effects cs6 on mac mountain lion with Intel HD 4000
Is its possible to enable GPU in after effects cs6 on mac mountain lion with Intel HD 4000?
No, OpenGL Swap Buffer support (Level 1) support for the HP4000 is for Windows only. Level 2 and 3 support is not available either. You'd need a more powerful NVIDIA card for Level 1, 2, and 3 feature support.
More info here: http://helpx.adobe.com/after-effects/using/rendering-opengl.html#main-pars_header_3 -
My wordpress home page will not display any active information in Firefox 15 on Mac OSX Lion.
Hey All,
I've tried many things to resolve this issue, but none of them seem to be working. For some time now I have not been able to see the homepage of wordpress.com with full information i.e. stats, notifications, etc. I'm running Firefox 15 on Mac OSX Lion with the following settings and add-ons. I've tried disabling the various privacy add-ons one-by-one to no avail. Please help!The only active thing I see on that page is the banner near the top which keeps changing: "For the cat pictures", "For the poet", etc. Do you not see that? I did not see any link for "Home". Try these pages:
* http://kb.mozillazine.org/Websites_look_wrong
* http://kb.mozillazine.org/Images_or_animations_do_not_load
Incidentally, it seems to me that you are using Mountain LIon, not Lion. Mac OS 10.8 is Mountain Lion. -
I wanna reinstall Mac OSx lion on MacBook pro, my problem is I dint purchase OSx lion with my apple Id before.so anybody can tell me how to purchase OSx with my apple Id on MacBook
Nope. You can purchase a Snow Leopard DVD for $29.00 through an Apple retailer or ordering from AppleCare:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site. -
I am running Mac OSx Lion 10.7.2.
My issue is that I am not able to run a search in the finder toolabar on a network server. No files show up nor does it search on the server anymore. I was able to run the search in snow-leopard and am no longer able to do so with Lion. Is there a preference I can change or some kind of app or program I can download that will help me with this issue? This is extremely problematic for me as I am searching for files all day everyday. Thank you!Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html -
I'm using a Mac, OSX Lion. I've been using Firefox for years. Lately I've been using version 6.**, meaning I keep the version up to date as updates come out. Quicktime videos have never been an issue. But, once I installed FF version 7.0.1, websites now tell me I need to install QT. This makes no sense. Worked in FF 6, doesn't work in FF 7. Videos on Apple's website won't play in FF 7.0.1. Says I need to install QT. Makes no sense, QT is part of the OS X Lion install.
I had the same problem with divx also and here is a solution that will work for both first install the firefox add on Add-on Compatibility Reporter that can be found here
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
next restart firefox then install the add on unplug that is found here
https://addons.mozilla.org/en-US/firefox/addon/unplug/
once that is done you might need to make sure that unplug is enabled. if done correctly after its setup you should be able to use the web player you have installed in windows to stream the videos you find on the net. -
Do you have a problem connecting to Wi-Fi? (iMac Mid 2011 Model)Mac OSX Lion 10.7.3
Did you just start up or restart your mac recently? If you did you might have experineced a problem with your Wi-Fi. I was unable to access anything that required Wi-Fi. So what I did was I restarted my iMac and my Wi-Fi was working again.
What might have caused the problem
A. The Wi-Fi chip did not start or restart (During the process of Starting or Restarting your iMac)
B. It could be a bug in Mac OSX Lion 10.7.3 or lower.
I hoped this helped you outIf it was previously working then try a smc and pram reset.
If that doesn't fix it then see if vlc can handle the video. -
Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?
Hi
Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
A reinstall should leave all your own personal data and programs in place.
Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
Message was edited by: softwater -
Question: Do I need to run and anti virus program with MAC OSX Lion? Have heard different opinions! If so what would you recommend? Was looking at Sophos. Does anyone have any experience with this? Thanks
Do I need to run and anti virus program with MAC OSX Lion? Have heard different opinions!
You will continue to hear different opinions here, where thoughts range everywhere between "anti-virus software is the evil spawn of Satan" to "anyone not running anti-virus software is a fool."
Truth is, this is still a very personal decision on a Mac. Depending on circumstances, it is still very easily possible to stay safe without using anti-virus software, but circumstances and personal preferences vary widely. Besides which, anti-virus software cannot even remotely provide you a guarantee of protection!
To learn how to stay safe (with or without anti-virus software), and how to decide whether to use anti-virus software, see my Mac Malware Guide. -
It´s Time Capsule compatible with 10.7.2 Mac OsX Lion and iOS5?
Hi. I want to buy Time Capsule of 2TB but.. it is compatible with Mac OSX Lion MacBook Pro Middle 2009 and with my iPhone 4 iOS5?
As far as backing up your Mac, yes it is. Time Capsule serves no purpose as far as backup for the iPhone though. It will give the iPhone a wireless signal though, using dual band technology. iPhone backups must be done through iTunes or iCloud.
-
My mac OSX lion is now very slow, any idea why?
my mac OSX lion is now very slow, any idea why?
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion/Mountain Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion/Mountain Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file. -
I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?
It is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This might be of some interest to you at this time: Life After MobileMe.
OT -
Mac OSX Lion Server Network User Login Issue
We have in the office a server running Mac OSX Lion, and several network users who've all been running happily for quite a will.
About a month ago I was added to the system, and initially we had a few issues relating to the home directory, but we changed 'something' and it all worked.
Fast forward to now, and we've added a new user - Hannah - to our system.
I've added her in the Workgroup Manager, and set her up everywhere I can find on the server. Her home directory creates on the server fine.
She appears in the Logon list on the client machines, and here's where the trouble starts...
Every time she tries to log on, it fails. The logon box just bounces or wobbles as though the password is incorrect. We've tried changing the password, to no avail. We've tried adding new test users - same problem.
We've tried sudo kinet on the Terminal as a local user, with variable results.
I'm at my wits end, and really hoping someone here can help offer some suggestions or advice we can work through to get to the bottom of this.
Thanks in advance!Your problems are likely occurring because you added her to the directory with Workgroup Manager.
You should really start avoiding WGM when at all possible as Apple is clearly moving away from it. Because of this, things don't always work as expected when using 'legacy' tools like WGM.
My guess as to what your problem is: When you create a new user in Server.app, two things happen for you automatically that WILL NOT HAPPEN if done from WGM.
First the user is added to the default "Workgroup" group.
More importantly (and the source of much confusion), the user is automatically added to SACLs.
Check the SACL for the user in Server.app, I bet you'll notice that they aren't a member of the File Sharing group like they should be. To solve this problem, you can either delete the user and recreate them in Server.app, or manually add them to the appropriate SACL.
I would opt for recreating them in Server.app if I were you, as I don't trust user accounts that originate in WGM on Lion Server. -
Quicktime Plugin Issue in Safari on Mac OSX Lion.
(Strange) Safari - Quicktime - issue on Mac OSX Lion (All Updates done - 20/11/2011)
Strange issue with Safari - Quicktime video playing - on Mac OSX Lion (All updates done till 20th Nov 2011 night)
Problem discovery: Tried to view the Apple iPhone 4S Keynote on Apple Website. Strange that Safari does not display any videos from Apple Website.
Following works OK:- You Tube worked fine.
- Google Chrome worked fine. (It shows the quick time player loading and then displays the video absolutely fine.)
Conclusion: There is some problem with Safari Quicktime Plug-in.
Strange Discovery:
- There are two users on the MAC. Logged in with a general user (Non Admin)
- When tried to view Apple Videos on Safary ... THEY WORKED FINE !!!
- The user where they donot work is an ADMIN User ... Strange !!!
System:
- Mac-Mini 2010 - 8 GB RAM - with OSX Lion fully software updated until 20th Nov 2011 night.
- DIVX is installed and is also a paid version - registered with DIVX website.
- VLC is installed.
- Perian was installed - after problem discovery - uninstalled it - no use.
Please help with a solution if anyone has faced and solved this problem. Sub question is : If DIVX / anyother plug-in causes problems with QuickTime plugin on Safari, why does it affect only one user on the system and not other users on that system ?
Notes:
1) There is a similar looking thread on MacRumors here but concluded that required to start a seperate one with clear problem statement.
2) Apple Forums
(a) One thread on topic that hints that some 3IVX plug-in can cause issues with Safari Quicktime Plugin: here
(b) Another thread from Apple Forum, that hints that DIVX causes problems to Safari Quicktime Plug in, Link is HereRefer to a thread on Apple Discussions Forum itself, Link is HERE; refer to the posting by "Charles Cole",
Charles Cole
Re: Does anyone recommend OS X Lion?
Aug 2, 2011 8:09 PM (in response to Landrix)
Charles writes about DIVX and QuickTime Plugin conflict in Safari:
One thing I've discovered that might help anyone having a Quicktime Plug-in issue. If you have DivX as a codec on your system (usually installed to play .avi files) you'll want to uninstall it so that Sarfari 5.1 will default to the Quicktime Plug-In and not the DivX plug-in. Otherwise, you can't see Quicktime movies in Safari.
Note: this post is about and at the time of OSX Lions launch, i.e. 10.7.0.
Now we have 10.7.2, still cannot believe Apple has not fixed this bug !!! -
I can't download linked files on mac osx lion what do i do?
i can't download linked files on mac osx lion what do i do?
There have been some reported problems with Apple's servers.
Try this.
Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
I assume you are trying to update via wifi. You can also connect the iPad to your computer and update using iTunes.
Cheers, Tom
Maybe you are looking for
-
Unable to Re-Setup Airport Express via iPhone or OSX
Hi, folks - Am temporarily in a friend's house and want to reconfigure my airport express for music playback. Have never had issues with the AE before, but I can't get it configured - either via iphone or imac. I have my iMac and iPhone 5s both on my
-
I have a new version of iTunes on my computer & copied some music albums into iTunes...but I cannot transfer/copy these albums to my iPod Touch. How do I do that? P. Kraus
-
Print a pdf file with dot matrix printer epson lx 350
Hi every body, I've a problem with my dot matrix printer. If i want to print a pdf file, the writers are not in a good format. please help me. Excuse if question is not correct it's not depend for me because i'm not an english but french. Thanks!
-
Inherit Permissions from parent
If I were to use Inherit permissions from parent instead of standard POSIX on a share, what happens when you propergate permissions? Do permissions that you explicitly set get changed by the parent folder? Are there any issues I should be aware of be
-
How to retrieve a window that is mostly out of the desktop view?
General: I have a window that is only partially visible because it's in the upper right corner of my desktop. I haven't been able to retrieve it. Detail: I have an application that I launch frequently and use with no problem. The application has a po