Grafting GroupWise objects to new tree,new Domain and new PO

Hello,
I have a fully functional GroupWise system that is running fine but running low on space. I built another server for testing purposes before I decided to build a new one for production. The test server has a copy of my GroupWise production server located in a folder called bak. I built and created a test GroupWise system that has no users.
Here is my question, if I were to use the Grafting utility, connect to the bak GroupWise system, change my paths to match the backup location and proceed to graft the objects to the new test PO and Domain, will I lose the original objects (like a cut and paste) or will it graft the objects (like a copy and paste) with out nothing lost from the original location?

Originally Posted by rjrayburn
Thanks so much for the response. I'm sorry for the delay due to a car accident I was involved in (a truck hit me). I'm good now.
Je***!! ... That's a scarry thing! Glad you are ok!
Originally Posted by rjrayburn
I guess what I'm trying to do is calculate how long it would take for me to move the data from my current GroupWise to a new server due to space issues by working with two test servers.
In my Test system I have a Primary Replica and a GroupWise server that contains a working GroupWise system. I restored a copy of my current GroupWise data on the test GroupWise server in a folder called test_backup. Once again the test GroupWise server is working but with a different GroupWise system name from my current GroupWise system name and with no users but the POA and MTA are working.
Is there anyway I can use the data from the backup GroupWise system put it in the test GroupWise system that has a different GroupWise system name?
Well... if this is going to be just for testing you could unload the agents on your test system, use NwAdmin (or ConsoleOne without Groupwise snapins) to remove/cleanup all the Groupwise objects in your test tree and graft the new/copied system in.
That should be fine, as long as you remove all previous Groupwise objects in the test system.
It won't work to graft a new system in where an existing system is still in place.
After regrafting change the paths in your eDirectory objects, the listed ip's... etc, and reconfigure the agents with the correct home parameters. Then you can launch them to see if it all works.
For a test this should work and it will give you a good indication of how long it should take you with the real migration.
In the real scenario always start with a clean tree where possible.

Similar Messages

  • Problems Removing Secondary Domain and agents

    I had a secondary Domain and a gwia and webaccess agent running on an vm box. The box had issues and crashed and I was unable to recover it. I am now left with a secondary domain and two gateways that I can cannot get rid of because the edir objects are gone. I get this error when I try to connect to the gateways....E-Directory counterpart of this object does not exist. The objects are not in edir. I am also unable to delete the domain because it has subordinates left under it. What are my choices for cleaning this out. I really would like to get this resolved before I try to upgrade to GW8.
    Thanks so much for your help!
    Rodney Neal

    This can be fairly difficult given your situation of not being able to recover the server so you might consider opening a service request with a partner or Novell Technical Support. I will try to give you the steps to follow though here..
    1. You need to first get the object back in the tree. To do this, you must graft them in by selecting a container in the tree and selecting Tools|GroupWise Utilities|GW/eDIr Associations|Graft GroupWise Objects. Follow the wizard through all the steps. This should get you the objects back though I do not understand why they would be gone in the first place with just a server crash. I assume that eDir was on other servers as well so wondering if you manually deleted the objects but either way, that is what you need to do.
    2. This is where it can be a bit tricky. You need to create a temp folder on the server and rebuild the secondary domain into that folder so that you have a database to work with. Just go to properties of that secondary domain and change the UNC path to point to the temp folder and then under GroupWise Utilities|System Maintenance choose Rebuild Database. In the end, there should be a wpdomain file in that temp folder.
    3. Copy in all the .dc files from your primary domain root folder into this temp folder.
    4. You now need to Release that secondary domain from the GroupWise system. To do this, make sure you are connected to the primary GW domain and then right click on the secondary in question and choose GroupWise Utilities|GroupWise System Maintenance and then there is an option to release secondary. This also brings up a wizard to walk you through the process.
    5. Now the secondary should show up in your live system as an external system. You just need to go under Tools|GroupWise System Operations|External System Synchronization and delete the new link it automatically created.
    6. Now you can just delete the objects. You may need to delete them separately from the tree afteward.
    Let me know if you have any more questions or need clarification.

  • Deleted my domain and cant add a new domain

    Hi all
    I deleted my partner domain name inside the admin panel and when i try to add a new domain i get this error msg....
    Error
      Domain already exists. Please delete all records associated with this domain before re-adding it.
    Can someone also tell me what the Advanced DNS Record is for cause i deleted that to and have no idee how i set this up :-/
    Please, need help!

    Hi,
    The issue here was that the domain was being locked for rebranding thus causing this error and preventing you to re-add the domain.  I've since escalated this so we can unlocked the rebranded domain and then wipe clear so you can re-add the domain back into the site with all your DNS records applied as normal. 
    We'll respond back to your case ticket once resolved. 
    Thanks for your patience.
    -Sidney

  • Migrate to new domain and new SCCM

    The migration scenario is this:
    All Clients are in Domain1 and are managed through SCCM 2012 with System Center Endpoint Protection 2012.
    Some of the clients need to join a new domain and be managed through a new SCCM 2012 R2 server with System Center Endpoint Protection 2012 R2.
    There are no trusts between the forests. Do we need to uninstall the SCCM 2012 Agent and SCEP 2012 and then install the new SCCM 2012 R2 Agent and SCEP 2012 R2?
    Or can we just uninstall SCCM 2012 Agent only and keep SCEP 2012 and later install.

    There are multiple ways to go about it.
    Assuming that the AD forest is properly extended and the new site's info is properly published, then you can simply run a script:
    http://msdn.microsoft.com/en-us/library/cc146558.aspx
    http://gallery.technet.microsoft.com/scriptcenter/Change-sccm-configmgr-cf6e0327/view/Discussions
    If the two assumptions above aren't correct, then the client has no way of getting the trusted root key gracefully for the new site and running ccmsetup  is the best way.
    The ccmsetup bootstrapper will download files as needed from the closest DP but (from memory) won't redownload files if they are already present in the ccmsetup folder.
    A client push is probably the easiest method to initiate ccmsetup because it can be managed from a central location -- just make sure you select the checkbox for always reinstall. Of course, as mentioned above, if someone has previously used the "group
    policy" to assign the site to your clients, you'll need to clean up that mess first otherwise the clients will always try to assign to the old site.
    Jason | http://blog.configmgrftw.com

  • Copy of SAP ESS objects to new namespace

    Hi,
    I need to take a copy of SAP ESS objects to new namespace and later want to do customization in the new object. I have requirement in which I do not want to change SAP delivered objects (sap.com)
    Scenario:
    (1)     Original object namespace: esscapdata u2026..sap.com
    (2)     New object namespace:      esscapdata u2026..abc.com
    Please let me know the solution ?

    Hi Anmol,
        Changing the name space is not very easy and might result in lot of errors. If required you first need to migrate the DC's to your new SC following the steps given in the post above. You need to do this only if required. For only changing the name space it is not required.
       Open the DC's in Developer Studio. You will have to manually go to every java file and change the package name to the required package name. Once you change the package name there will be lot of errors. You will need to fix the errors manually. Mostly it will be package not found error. Once all the errors are fixed a DC build will create the new files in your new package structure.
      Ideally this is not required for customization.
    Regards,
    Sanyev

  • What is this - Object[] x = {new String[]{"a","b"}};

    What is the meaning of this -
    Object[] x = {new String[]{"a","b"}};
    I have a function which takes Object[] as a argument. And I have data structure like this -
    Name = Zoolander
    Name = Hansel
    Name = Mugatu
    I am not interested in the Name part. This has to be converted to - Object[] x = {new String[]{"a","b"}}
    It works if I hard code the values like this -
    Object[] x = {new String[]{"Zoolander","Hansel","Mugatu"};
    Thanks in advance

    Don't crosspost, please.

  • I'm trying to add a new domain and I'm getting error message.

    Hi,
    I'm trying to add my new domain name and I'm getting error message that says: 'Cannot add domain because this domain already exists. Please delete the domain and I already deleted it along with all the 'A Records', 'CNAME Records (Alias)', MX Records',  and 'Advanced DNS Records'. I have a ton of new fans coming to the site tonight. Help!!!

    Did you ever setup another trial BC site before and attach that domain name?  I'm pretty sure that if the domain name is attached to BC's nameservers already even if it's under another account then it won't work.  Not 100% sure about it but it's a likely culprit.  Try to type the subdomain you are adding into a browser and add "/admin" and see if you can login to BC-- if it's an old site you had setup then you should remove the subdomain from that account first and then try to add it to your newer BC site.

  • Re-Install Business Objects on new CMS Environment

    Hi All ,
    I have to  Re-Install Business Objects on new CMS Environment
    Can you provide me steps and documents for same .
    Regards,
    Abhishek

    Hi Abhishek,
    Please refer the below link & SCN Thread for your reference.
    Business Intelligence - Installation Link:
    Installation - Business Intelligence (BusinessObjects) - SCN Wiki
    SAP Business Objects 4.0 Installation Steps by SAP:
    http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=1&cad=rja&uact=8&ved=0CCsQFjAA&url=http%3A%2F%2Fwiki.scn.sap.com%2Fwiki%2Fdownload%2Fattachments%2F333808373%2FSAP%2BBO4.0sp4-fp3%2BImplement.docx%3Fversion%3D1%26modificationDate%3D1368111605377&ei=vzcNVO7pA8bluQTrqID4BQ&usg=AFQjCNH9TdZToCXUM62ohGY1j0Ej98-gzQ&sig2=73QHmf2acp_sqQHKD115fw&bvm=bv.74649129,d.c2E
    Installation-manual-SAP-BusinessObjects-BI4.0-(inclusive-mobile-configuration-for-iPad)
    http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=2&cad=rja&uact=8&ved=0CDQQFjAB&url=http%3A%2F%2Fwww.pieterverstraeten.com%2Fblog%2F%3Fdownload%3DInstallation-manual-SAP-BO-BI4.0-inclusive-mobile-configuration-for-iPad.pdf&ei=IDgNVJW9Gs2MuATwaQ&usg=AFQjCNHrtSXXADA-6ISkgrPU7b9FyK6AHg&sig2=RPkgtC2dvQ1U2YVNvY4YnQ&bvm=bv.74649129,d.c2E
    Business Objects BI 4.0 - Installation Step by Step
    http://bobj4.blogspot.in/2011/06/business-objects-bi-40-installation.html
    SAP BusinessObjects Business Intelligence Suite 4.1 SP03 (SP3) Released
    http://scn.sap.com/docs/DOC-53864
    BI platform 4.0 cluster configuration
    http://wiki.scn.sap.com/wiki/display/BOBJ/BI+platform+4.0+cluster+configuration
    BI4.0 Product Support page
    http://wiki.scn.sap.com/wiki/display/BOBJ/BI4.0+Product+Support+page
    Thanks,
    Daya

  • Smart objects: nothing new - what a shame!

    I am extremely disappointed to see that smart objects haven't progressed one whit since CS5.  Still filters that don't work with them, still only one mask, still no auto-align/auto-blend on smart objects, still no HDR on smart objects ... list goes on and on and nothing has been added. Very sad.

    So you got a dead remote or a dead battery. Call AppleCare and it will be taken care of. What's the big deal? These things happen from time to time.

  • PL/SQL Object Type - Java oracle.jbo.domain

    PL/SQL Object Type <-> Java oracle.jbo.domain
    can anybody help me, getting my domains to work?
    Following scenario:
    in pl/sql we have an object type called MULTI_LANGUAGE. This type is used for storing multilingual texts as nested table in one(!) column.
    So the object MULTI_LANGUAGE contains a member variable LANGUAGE_COLLECTION of type LANGUAGE_TABLE, which itself is a nested table of objects
    of the type LANGUAGE_FIELD (this again is only a language id and the corresponding content)
    Also the methods setContent(langID, langContent) and getContent(langId) are defined on Object MULTI_LANGUAGE.
    For example: Table having primary key, 2 other columns and one column of object type MULTI_LANGAGE (=nested table of objects)
    |ID|Column1|Column2|  multilingual Column  |
    |--|---------------------------------------|
    |  |       |       |  -------------------  |
    |  |       |       | | 1 | hello         | |
    |  |       |       |  -------------------  |
    |1 | foo   | bar   | | 2 | hallo         | |   <- Row Nr 1
    |  |       |       |  -------------------  |
    |  |       |       | | 3 | ola           | |
    |  |       |       |  -------------------  |
    |--|-------|-------|-----------------------|
    |  |       |       |  -------------------  |
    |  |       |       | | 1 | world         | |
    |  |       |       |  -------------------  |
    |2 | abc   | def   | | 2 | welt          | |   <- Row Nr 2
    |  |       |       |  -------------------  |
    |  |       |       | | 3 | ???  ;-)      | |
    |  |       |       |  -------------------  |
    |--|-------|-------|-----------------------|Now i've tried to modell this structure as an oracle.jbo.domain.
    class MultiLanguage extends Struct having this StructureDef:
    attrs[(0)] = new DomainAttributeDef("LanguageColl", "LANGUAGE_COLL", 0, oracle.jbo.domain.Array.class, 2003, "ARRAY", -127, 0, false, "campusonlinepkg.common.LanguageField");
    and
    class LanguageField extends Struct having this StructureDef:
    attrs[(0)] = new DomainAttributeDef("Id", "ID", 0, oracle.jbo.domain.Number.class, 2, "NUMERIC", -127, 0, false);
    attrs[(1)] = new DomainAttributeDef("Content", "CONTENT", 1, java.lang.String.class, 12, "VARCHAR", -127, 4000, false);
    Is there anything wrong with this StructureDef?
    When running the BC-Browser with -Djbo.debugoutput=console -Djbo.jdbc.driver.verbose=true parameters I get suspect warnings when browsing the records
    [196] Executing FAULT-IN...SELECT NR, NAME FROM B_THESAURI BThesauri WHERE NR=:1
    [197] SQLException: SQLState(null) vendor code(17074)
    [198] java.sql.SQLException: Ungültiges Namensmuster: XMLTEST.null
    ...snip: detail of stack...
    [240] SQLException: SQLState(null) vendor code(17060)
    [241] java.sql.SQLException: Deskriptor konnte nicht erstellt werden: Unable to resolve type "null"
    ...snip: detail of stack...
    [280] Warning:No element type set on this array. Assuming java.lang.Object.
    (XMLTEST is the name of the schema)
    Seems as if the framework can't read the TypeDescriptor or does not know which descriptor to read (XMLTEST.null??)
    Do I have to implement my own JboTypeMap?
    Please help, I'm stuck.
    Thanks in advance, Christian

    Thanks for your suggestion, but it seems to me as if there is one level missing.
    in pl/sql I have following structure:
    Struct MULTI_LANGUAGE (Object type) - outermost
      Array LANGUAGE_TABLE (nested table type)
        Struct LANGUAGE_FIELD (Object type simple) - innermostthe reason why i had to wrap another struct around the array was because it is not possible to define methods on a nested table. this is only possible on objects.
    on the outermost object type (which holds the array of language fields) I needed to define following 2 methods for direct access:
    getContent (langId in number) returns varchar2
    setContent (langId in number, langContent in varchar2)
    I would like to rebuild the same structure in java, because newly written java code should live in perfect harmony with legacy pl/sql code ;-)
    Both applications (Java and pl/sql) have to access the same data as long as migration to java goes on.
    Is this nested structure too much for a Domain?
    Any other suggestions?
    Thanks again, Christian

  • How can I get rfc822 format using Groupwise Object API(C++)?

    I am newbie to Groupwise Object API, I want to get email in it's rfc822 form. How can I achieve this?

    You need to have GW 8.0.0 DLL's.
    The gwoapi10.h is an older header file.
    You will need to use at least gwoapi_800.h.
    gwoapi12.h is the header file for 7.0.3.
    You can download newer header files at:
    ftp://ftp.novell.com/outgoing/gwoapi_h.zip
    Preston
    >>> On Monday, November 23, 2009 at 5:36 AM, ashutosh
    jogdande<[email protected]> wrote:
    > Preston Stephenson;1893650 Wrote:
    >> This has been discussed in previous postings. Search
    >> the postings for MIME. If you have specific questions
    >> after that, feel free to post those.
    >>
    >> >>> On Monday, November 23, 2009 at 12:36 AM, ashutosh
    >> jogdande<ashutosh_jogdande@no‑mx.forums.novell.c om> wrote:
    >>
    >> > I am newbie to Groupwise Object API, I want to get email in it's
    >> rfc822
    >> > form. How can I achieve this?
    >
    > Hi Preston,
    >
    > From the post 'GetMime method C++' only I could understand that
    > I'll have to use GetMime() method. (Please correct me I interpreted it
    > wrongly). But I couldn't find GetMime() interface (as I am using
    > gwoapi10.h), the ftp URL given in the post is unavailable, can you
    > please share it once?
    >
    > Thanks,
    > Ashutosh

  • How to bind an object to JNDI tree in iAS?

    Hi all,
    When I try to bind a string object to jndi tree, the following exception
    occurs:
    javax.naming.NamingException: Unable to get object instance from reference.
    Roo
    t exception is javax.naming.NamingException: Can't bind instance of class
    java.lang.String
    at com.netscape.server.jndi.RootContext.bindCtx(Unknown Source)
    at com.netscape.server.jndi.RootContext.rebind(Unknown Source)
    at com.netscape.server.jndi.RootContext.rebind(Unknown Source)
    at javax.naming.InitialContext.rebind(InitialContext.java:385)
    at jsp.APPS.bmx.test2._jspService(test2.java:76)
    at jsp.APPS.bmx.test2.service(test2.java:42)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
    at
    com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
    Source)
    The code fragment is:
    Context ctx = new InitialContext();
    String str = "hell,every one!";
    ctx.rebind("abc", str);
    Can anyone give some help? Thanks in advance.
    Johnson

    To bind an object into the JNDI tree check the documentation here:
    http://e-docs.bea.com/wls/docs81/jndi/jndi.html#475702
    If this is to be used by all your applications that you deploy on the server check out the startup/shutdown class documentation here:
    http://edocs.bea.com/wls/docs81/ConsoleHelp/startup_shutdown.html
    Cheers
    IV

  • Error Message: JBO-25009: Cannot create an object of type:oracle.jbo.domain

    Hi, When im giving a default value to a date column in the attribute settings i get this error when im running my jsp page (bc4j web application):
    Error Message: JBO-25009: Cannot create an object of type:oracle.jbo.domain.Date with value: 31-dic-2099
    How can i fix that? I�ve already trying all possible date formats.
    Thanku

    The default format for Date (oracle.sql.DATE which is the superclass of oracle.jbo.domain.Date) is yyyy-mm-dd.

  • "Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

    Team,
    I am trying to Install Exchange on my Lab, getting below error
    message.
    The Schema Role is installed on Root Domain and trying to install
    exchange on Child domain.
    1 Root Domain - 1 Child domain. both are located on single site.
    “Setup encountered a problem while validating
    the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
    replication to complete.”
    Followed below articles:
    http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
    http://www.petenetlive.com/KB/Article/0000793.htm
    transferred the schema roles to different server on root domain, still no luck.
    can someone please help me.
    regards
    Srinivasa k
    Srinivasa K

    Hi Srinivasa,
    I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
    1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
    After finishing this,
    2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
    3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
    4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
    5. Finally, run the setup program
    Hope this will help you
    Regards from Visit ExchangeOnline |
    Visit WindowsAdmin

  • Active Directory error message "the following object is not from a domain listed in the Select location forestB\username

    Hello Community
        "forestA" is my forest it is a Windows 2008 Server Enterprise Edition
    domain controller using Active Directory and the UI.
        In my forest ("forestA") trust relationship I created a "One-Way, Out-going"
    forest trust with Forest-Wide authentication so that a different forest user(s) or
    group(s) with a different admin in a forest named “forestB” can access the resources in my “forestA”
        But also forestB needs to create a "One-way, Incoming" forest trust so that
    I can either add the user(s) or group(s) from “forestB” into to a "Global Security - Group"
    in my "forestA" or I can
     add user(s)  as  "domain user(s)" from “forestB” into my "forestA".
        The problem is that when I right click  the global group in my forestA  and then
    properties, when I click "Members" and then the "Add" button when I type
    "forestB\username" I get an error message from Active Directory stating:
        "the following object is not from a domain listed in the Select location
    dialog box, and is therefore not valid: forestB\username".
        Am I doing something wrong when creating the one-way trust in my
    “forestA” or is the one-way trust being created wrong by the other domain admin in the other “forestB”?
        Or could I possibly need to select "Change Domain" or "Change Domain Controller"
    before adding the users or Groups to my forestA from forestB?
        That is why I am asking
     how do you add an Active Directory user from one forest into another forest?
        Thank you
        Shabeaut

    Hello Denis Cooper
        That is the end result.
        What I was trying  to do was that I was trying to
     bring in the user(s) and group(s) from “forestB”  into
    my “forestA”  Global group.
        Later on I was going to add the user(s) or Global groups(s) that I brought into my dc in my forestA
     into the domain local groups  on my member servers in my forestA.
        So since the error message is:
    "the following object is not from a domain listed in the Select location dialog box, and is therefore not valid: forestB\username".
    Does your response
     mean only Global group(s) from forestB not domain user(s) from forestB have
     to been added to domain local groups in forestA?
    Or is it also possible to add Global group(s) from “forestB” to Global group(s) in my “forestA” and if so
    how without getting the above error message?
    Thank you
        Shabeaut

Maybe you are looking for