GragaeBand not recognizing multiple channels on USB mixer

I have the Tascam US-1800, it is a 16 channel USB mixer. I used it to record muliple tracks at once. But lately when I plug the mixer into the computer, it only appears as one channel. If any body else is experiencing simular problems, plese leave a comment!

Simple - use a single task with multiple channels. Surely the answers in all of the related posts said that. The channel list is just dev1/ai0:1.

Similar Messages

My toshiba satellite e105-s1802 do not recognized my a4tech pocket usb hub pls help me with this?

my toshiba satellite e105-s1802 do not recognized my a4tech pocket usb hub pls help me with this?

I AM HAVING THE SAME PROBLEM WITH THE SAME MODEL. I GOT THE SERVICE
MANUAL AND I'M THINKING TO OPEN IT AND SEE IF THERE'S SOME PHYSICAL BAD CONNECTION
INSIDE. BUT LIKE YOU SAID. IT'S ONLY THREE MONTHS OLD.!!! I DON'T WANT TO RUIN THE WARRANTEE.
BUT THIS IS VERY FRUSTATING. I WANDER IF TOSHIBA DOES THIS ON PURPUSE.!!! KEEP IN TOUCH AND
IF YOU NEED THE SERVICE MANUAL CONTACT ME AT [email protected]
THANK YOU.!!!!

USB Device Not Recognized on Windows 7 - USB mouse

I have a 4 week old Inspiron 1545 with Windows 7 Home premium that has developed an error: USB errors while trying to install a Microsoft USB mouse on this Laptop. Interestingly, my Microsoft USB Mouse installed perfectly first time and worked for about 2 weeks, and then failed. In looking at the system restore points, it tells me that there have been two driver updates to the USB environment since the unit was shipped from Dell. I wonder if an automatic update from Microsoft has somehow inadvertently updated or replaced a Dell factory driver.
Two nights ago I spent 45 minutes with Dell tech support doing remote control bug fixing on this laptop. They werent able to fix it (in the time allowed). They downloaded at least one of their newest drivers onto this machine and rebooted it - and they seemed pretty savvy - but still not working. So I went ahead a did a system restore to a point about 10 days back because I could see that a USB driver would be affected (as shown in the system restore menus), and I would like to compliment Microsoft on this very cool functionality!
At this point, I've unplugged the USB mouse , used the Device Manager to delete the 'unknown device', and done a system restore back to what I suspected was a working point. But still getting a 'Device not recognized' warning every few minutes, and still don't have a working mouse. I don't want to have to do system restores back to pprevious dates, although I suspect this is one solution.

Hello,
I just wanted to let u know, I had this same issue for about 2 weeks. Basically what happened was a bad install of my AMD Chipset drivers. When I attempted to upgrade, the install didn't go all the way through.
I then restarted my system, and BAM! No Mouse or Keyboard functionality thru USB.
Even when I went into SAFE MODE the Mouse and Keyboard were not functional. The only time they worked was when the computer first attempted to start, BEFORE windows loaded.
So, this means that your issue is a software problem.
I thought it was some other software that I installed, and ran a restore session, but that wasn't the issue. Still no functionality.
I even tried removing my CMOS battery, to reset it, since some people said that had solved their problems...Still nothing.
I then read other forums around the web using my Android phone to try and find a solution, only those solutions were no help.
I was also advised to run: MSCONFIG and Hide all Windows programs and then stop every other driver, source from loading (of course if my mouse and kb worked, I would have tried that).
I had even read that because I was using USB, that I should try using a PS/2 Mouse and Keyboard connection.
It took me 2 weeks to get the correct PS2 adapter that worked, which would essentially allow me access to my system again...
I Purchased a USB A Female to PS2 (MDIN6) Male Adapter (for Mouse) from http://www.SFCable.com
This my friends, was a lifesaver. I only have one PS2 port on my system, so I used my mouse to try every option I had previously read about. Of course you cannot type because the keyboard doesn't work, so you need to know the location of the folder where
the programs you are trying to run are.
So, a little after I got back into my system, and I closed down all programs, the warning screen came up that ALL of my USB Ports failed and could not be updated. I even Uninstalled every last USB port from the System Properties and restarted, and still
that didn't work.
I had forgotten that during the time when this problem arose, there was a failed install of my AMD chipset drivers, so luckily I had not deleted the source file and I tried to reinstall, and VIOLA! I'm back up and running and my USB ports are restored
and everything is working!
I hope this solution is able to help other people out there.
Thanks,
JE - [email protected]

ATP Photo Finder GPS not recognized on Mac as USB flash drive

Much like the problem with the Sony GPS-CS1, it appears the ATP Photo Finder device also will not be recognized as a flash drive on a Mac. Tiger worked with the Sony for awhile, but recent updates (as well as Leopard 10.5.x) have made it no longer work. There are other topics on the GPS-CS1 in these forums detailing those problems.
I picked up an ATP Photo Finder from My Discount Digital to try it out. It logs data, then you insert the memory card in to the device and it will GPS stamp the JPGs. It sounds like a great idea, but when it didn't work I was going to have to plug it up to my Mac and use PC software via Parallels to reprocess the images.
It is not recognized -- and under Parallels, a new USB device shows up simply listed as "U" under the pull-down menu. When I try to select it, it claims it is already in use. Methinks Apple Mac OS X is semi-grabbing the device but not being able to use it.
Odd.
So I post this in case others have the ATP Photo Finder and have problems... Maybe we can figure something out.

Well, here's an odd (and quick) self follow-up... I was reading an Apple Help file and it suggested looking at the System Profiler to see if the device is being recognized. Indeed, it showed the "U" and some garbled characters (so something is not quite right). It also showed it was plugged in through my powered USB hub. I bought this hub after running in to issues with devices that would not work plugged in to the iMac keyboard... On a whim, I plugged the ATP Photo Finder in to the non-powered USB port on the keyboard and ... it worked. It still shows up as U(garbled) but I was able to access it from the Mac Finder.
Interesting.

Macbook Air not recognizing anything connected via USB?

My MB Air is not recognizing anything that I connect via USB...camera, harmony remote, phone, toys - nothing! Nothing is showing up as being recongnized...anyone else having this problem? I have tried virtually every device...what the heck?

SMC reset and re verify
SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
If no USB device of any kind can be found contact Apple for appt. for free in shop full diagnostic and likely parts replacement.

TOUCHSMART 520 PC NOT RECOGNIZING DEVICES IN THE USB PORT.

When I plug any devices into the USB port, they are not recognized. The computer acts as if they are not there. The devices (MP3, camera, Garmin, etc) turn on, so I know that they are connected. The Printer and wireless mouse that connect through the USB port still work and I have tried changing ports...it doesn't make any difference. Even if I try to search for thr device, the computer does not find it. Any ideas?

Hi DJOBES,
Welcome to the HP Community, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear about your USB issues. I will be happy to assist you but I need some additional information; what is your operating system and product number?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Shuffle 2 - device not recognized... USB Driver?

I got the Shuffle 2nd Gen, plugged it into my PC, and it blinks orange with no install box on Windows, and a "device not recognized" error. Nano works fine on my computer, and my Shuffle works fine on a Mac laptop, so customer service told me it must be a problem with an outdated USB driver.
Here's the problem: I don't know where to get the USB driver update, because my PC is custom made, and I don't know who the manufacturer is. The customer service guy says to find the maker of the motherboard, but I'm not 100% sure how. My Device Manager says "VIA USB Enhanced Host Controller" is the only listed Enhanced (2.0) USB Port. I used a program to find the motherboard manufacturer, and I think it's a "Chaintech 7VJL APOGEE."
Can anyone help me find a USB driver? Might something ELSE be the problem?
(I'm reposting this from a reply I wrote to a different thread)
iPod Shuffle 2nd Generation Windows XP Custom PC

Hey 655micha,
I'm sorry you're having an issue with a USB device. Do you get an error window that pops up? If so what does it say? Have you checked Device Manager? Is is just one device that isn't working? Has it ever worked before? Is it just one USB port in particular that isn't recognizing devices?
What model do you have? Here are the steps to find your product number. FN + ESC is the easiest way to find that information.

IPod not recognized by laptop's USB 1.0 port

There are a couple of problems here. I have an external hard drive that can only be accessed with a USB 2.0 cable. I had to buy a card with USB 2.0 ports since my laptop only has USB 1.0. When I try to update the iPod (plugged into the USB 2.0 card as well as the external hard drive), everything freezes, goes very slowly, and I can't transfer songs from the external hard drive.
When I unplug the external hard drive I can update songs from my laptop's hard drive, but the iPod has to be plugged into the USB 2.0 card. When I plug the iPod into the laptop's USB 1.0 port (regardless of whether the external hard drive is connected) the iPod is not recognized, it only gets charged.
I tried this iPod on a different computer last night and it worked great.
So two questions: 1) how do I transfer songs from my external hard drive (get my computer not to freeze) and 2) how can I make my laptop recognize my iPod when it's plugged into the laptop's USB 1.0 port?
Thanks a lot

Well... from what i am reading about your post, you want to transfer your music from the external hard drive to your laptop. if this is correct then i think that you should open the hard drive into a window and put all the music into 1 folder and drag it onto your desktop, then once the music is downloaded onto your laptop, (if there is enough space) unplug the external hard drive and use the USB 2.0 port 4 your ipod w/o the hard drive. sometimes when i plug my ipod into my PC it will stop everything for 5 minutes then it starts to work. so i recommend to plug it into the 2.0 and wait a while and see what happens.
Windows XPee

IOS devices not recognized in iTunes via USB

I am on a Windows 7 x64 home-built computer and I am pretty technically inclined, but this one problem has been bugging me for quite a while now.
I am pleased that Apple wants its devices to sync wirelessly with iTunes from now on, but there are times when it is necessary to plug in the device via USB, such as when transferring large files.
However, in the last few weeks/months, I have noticed that iTunes will not recognize my iPhone 4 nor my iPad 2 when they are plugged in via USB. The computer recognizes the devices, drivers are installed properly, and I can see the devices in Windows Explorer, getting photos off of them that way. However, iTunes does not show the devices with that "plugged in" icon next to them, only the usual sync/eject icon.
This is also a problem because sometimes iTunes just won't "see" the devices, but sometimes it will. Regardless, I need to be able to tether them sometimes for transferring relatively large files via USB. Wi-Fi just isn't fast enough. I suppose I may have to disable Wireless syncing altogether, but I fear that may not fix the problem, because it was syncing via USB just fine in the early weeks of iOS 5 and with wireless syncing enabled. I do have the latest iTunes, I do have the latest firmware for both devices, and I have rebooted both my computer and the devices several times lately, all without effect.
I've done all the simple solutions and none of them have worked. Can anyone explain what's going on and, more importantly, what I can do about it?

Yeah, I've tried 5 out of the 7 steps shown in their troubleshooter. The sixth step is one that is a major pain and I doubt would fix the problem: Reinstall iTunes. I know enough about PCs to feel about 80% confident that this step would not fix the issue. Plus, it's a major hassle with re-adding music to the collection. Nevertheless, I will look at it as a last ditch effort.
The seventh step is extremely vague and doesn't really help. "There might be a software conflict." Fine, but there's no way to find any such conflict, if one even exists in the first place, without a heavy dose of trial-and-error, several hours of time, dozens of reboots, and the patience of Job.
However, they do list some other steps that I'll try when I get home, such as making sure certain services are installed and running. I'll post my results here. Thanks, wiclee.

Nokia 6682 not recognized by iSync (using usb cable)

Isync does not recognize my new Nokia 6682 when using a USB cable. My Powerbook does not have Bluetooth. I also don't see an icon on the desktop or any other evidence that the phone is connected to the powerbook. Do I need to change any settings on the phone or the powerbook?
1 Ghz Powerbook G4 Mac OS X (10.4.7)

Welcome to Apple Discussions.
Synchronization and file transfer to Nokia supported mobile handsets and smartphones is not supported via USB - you must instead use Bluetooth. As a general rule, such events are supported via USB only with Motorola mobile handsets.
To address you issue, you should purchase a D-Link DBT-120, the only third-party external USB Bluetooth module explicitly supported by Apple. You can learn more about Bluetooth in the Bluetooth Other Devices forum, here:
http://discussions.apple.com/forum.jspa?forumID=1003

PC Not Recognizing the iPod's USB device

I installed a new copy of Windows recently, and now when I connect my iPod to any USB port (doesn't seem to matter which) my PC will often not recognize it. It takes me to take the iPod out and put it back in for it to know that it's there. I believe this is why my iPod refuses to update its song list properly. It will put 15 songs on it and then stop. If I disconnect and reconnect it, it will just put the same songs on it and stop again. I recently took my iPod in to an Apple store to have it looked at because I couldn't even restore it because it seemed like it was corrupted. Now I believe it really never was. It's like I need to have a driver for the USB port device and the software disk that came with the iPod doesn't contain one. But I honestly don't know. What do I do?

Sorry. I gave you misinformation. My PC runs windows 98 SE. I downloaded the drivers and the firmware
from the Creative web site. Installed the drivers. I inserted the built -in USB Connector of MUVO TX USB flash dri've while pressing the player button. I executed the firmware and the animated flash light turned on but after 2 minutes, the response was no removable dri've is detected. I will make several more attempts before I give up.

Slow sync and not recognizing as 2.0 usb hub

now i do apologize if this has been done before..i have done some research on this problem but no real solutions..now i can't imagine that the mac gurus can't figure this out but it's getting me ****** off..every time i hook up my 3gs to the pc, with the latest software updates and all, i am getting a pop up stating i am hooking up a high speed device to a slow speed usb hub..i am using a pc with xp..not too sure which packet it is and i am not sure how to figure that out either..now i do now for sure that all of my usb ports including the one attached directly to the mother board are all 2.0 usb hubs..i just bought a brand new nano w.video newest generation and that works no problem..i think i found somewhat of a resolution to getting music on the phone..i am able to get music on the phone in about half the time it took me before..i let the phone sync till the the backup begins, you have to wait till progress bar starts to move, if u do it too soon will cancel the sync altogether..i hit eject in itunes then cancel..this sometimes brings it back to sync..i wait a few minutes literally, then i hit cancel again..this usually forces the music to start transferring to the phone..once music is done u cancel the sync again..then eject..the only drawback i have found it doesn't recognize the folders w.playlists in them..just puts the playlists on the phone w.no folders..i put the same folders on my nano and they appear like they are supposed to..
Message was edited by: hardkiss

i am plugging into the tower directly..i have used every usb port connected to my pc even the one directly connected to the mother board..still flustered

Have Ipon Nano and Mini, Mini is not recognized when pluged into USB.

I have a Ipod Nano and Mini. The Nano works correctly. But when I plug the Mini in I dont get anything, not even a battery charging icon. But, when I plug it into the USB on the back of the computer in stead of the front the computer just beeps.

Work your way through these.
The Five Rs.
Your Windows PC doesn't recognize iPod.
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Strange iPod behavior.
When restoring the iPod, put it into disk mode first.
Putting iPod into disk mode.
Your profile shows you are using Windows ME. Is this correct?

G5 Dual Core not recognizing PCI Express to USB card

I can not get my G5 (late 2005) to recognize a new PCI Express-to-USB 2.0 5-port card. This is an NEC -chip set card, model SD-PEX-NEC5U.
I have another USB card in Slot-4 and, of course, the graphic card (GeForce 6600) in Slot-1.
I've tried this new card in both Slot-2 and Slot-3 with no joy. This is the second NEC card I have tried, thinking the first one was defective.
Does anyone know what the problem is?
Thanks!
Steve

Hi drmemory-
Unfortunately it isn't as simple as being compliant with a couple of mutual standards. No matter what platform you are using you will most likely need drivers. Were there any mac drivers on the disk? That is usually a clue about compatibility.
Considering that the System Profiler doesn't see it, perhaps and SMU reset is in order: How to reset the SMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005)
Luck-
-DaddyPaycheck

NativeWifi application not recognizing Miniport Driver over USB

Hi,
We are working in WEC7 Wifi driver over USB interface. We have developed the custom miniport driver.
In our case, when we analyse the Debug prints, Wifi driver is up and scanning properly. But Native Wifi
application is not able to display/indicate anything on UI. It is showing the Adapter as OFF. Same Miniport driver is working fine over SDIO.
Any registry settings or configuration related changes is needed please let me know.
Thanks,
Seeth

The problem was solved by unplugging the printer (not just power off), waiting 5 minutes, plugging back in and restarting. Everything is working like a charm - USB, wireless, etc.
Found the answer as a response to another similar post in this forum.

GragaeBand not recognizing multiple channels on USB mixer

Similar Messages

Maybe you are looking for