Grahic frame on master but graphic comes in in its own frame on active page

In a template where do you put the graphic frame for an object style? to avoid this?

Janet,
I know you're snowed under with this project. You might save yourself some time though, if you remember that styles are independent of any object -- you apply them to objects, and they don't "live" on any particular page.
What this means is you can define a paragraph or character style, or even an object style, with absolutely nothing on the page and no selections, presuming you know what it is that you want the style to do. Once defined, you can pre-apply an object style to a placeholder frame (or a paragraph style to the insertion point in a placeholder text frame) on the master page, and that frame will pass the applied style to whatever you place into it. Going through the exercise of formatting something just to define a style, then removing the object, is not necessarily a time-saving step.
Peter

Similar Messages

Is it normal for your iPod touch 4th gen screen to come off on its own?

So I have had my iPod touch for a while now. I understand that things get old and fall apart eventually, but what confuses me is how does the screen come off on its own? I noticed it a few weeks ago when I was reading a book that some light was able to come out from the top area of the screen where the camera is located. I started to investigate about it and turns out the the top area of the iPod had came loose. A few days later I noticed that it started to get worse. It started to allow me to see the components on the inside. Then my screen turned off not allowing my to turn it back on when I later found out that one of the cables that connect the screen had came lose and popped off the connection for it. What should I do? Please help me and tell me what I should do to fix it.

"Do you have any duct tape?" Seriously, no it shouldn't come off, contact your Apple genius bar and get it fixed. Good luck.

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I alocate th

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I allocate the extension .docx to Word? There used to be a way of doing it, I think under "Preferences" but I can't seem to find it.

Still in the same location:
File > Get Info > Open with (select) > Change All (button)

Service Broker Disabled but it comes back showing its Enabled.

Used to disable SERVICE BROKER in single user mode :
ALTER DATABASE [Database_name] SET DISABLE_BROKER;
SELECT is_broker_enabled FROM sys.databases WHERE name = 'Database_name';
when i checked the database after disabling, it shows 'is_broker_enabled'=1
wht can be problem.
Naveen| Press Yes if the post is useful.

Interestingly the broker is disabled but i see the receive_wait messages on 'Activity monitor' for the database where service broker is disabled.
Any thoughts
Naveen| Press Yes if the post is useful.

Iphone 4s light problem? Back light keeps going dark at random times? Like when you change the lighting but it does it on its own?

Does anyone have a idea what is going on with my iphone?
On settings you can change the brightness of the screen but my iphone does it when it wants to?
I have auto brightness off, and when im on my phone the light goes dark? It did it today when i was ending a call just go very dark? It doesnt do it all the time just at random times?

This is hardware fault of LCD Display or Logic Board Display controllers. Restore iPhone with iTunes on computer. See if better. If still problem and you have Warranty or AppleCare, make Genius reservation and take to Apple for resolution. If no coverage, the next step would be replacement of entire front assembly. If still problem there is no resonable fix. If you want this handled by Apple, they do not replace iPhone 4S front screens, they replace the entire iPhone 4S exactly like yours for $199.

The non master server is shutting down on its own?

Hey all,
I just started have this problem this week. With HA configured I am having the non-master host restarting on it's own. I have been unable to find anything in the logs that would explain this.
Shared storage is on a FC SAN device.
2 Dell 2950 III servers
Oracle VM 2.1.2
Any Ideas? or is anyone else seeing this?

Check for ocfs2 errors on the master -- the new versions of ocfs2 automatically reboot a fenced node, which is what sounds like is happening to your non-master server. You may have to run the /etc/init.d/o2cb configure on both servers to increase the polling/heartbeat time between the two boxes, so that ocfs2 doesn't fence itself.

I have a program named facemoods that has taken over my search and comes up on its own, can I get rid of it?

When I open Firefox it opens normally then a program named Facemoods Search inserts its self infront of Mozilla Firefox. Then it takes over the search bar. Can Facemoods be removed ?

See:
* [/questions/772061]

I have a hp compaq 6910p i have configured windows 10 on it But graphics not working properly

Hello brother i have a hp compaq 6910p i have configured windows 10 on it . But graphics not working properly .can i get help ?My graphics Not working properly .Help me some one. please.

Look here!! https://community.amd.com/thread/184529 This driver is compatible and working for windows 10 : http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=BD0BF5DE-5E2A-4C42-959D-E4B3296AC126&OSID=DD13C337-8EFF-4CFB-A589-72971D7BCBCE&Status=False&Component=ATI - Mobility Radeon X2300 HD (Onboard)

Adobe Creative Cloud because I do not get After Effects among others but I try to install software from the page but I give After Effects download shareware and says downloading but nothing comes give him retrying but nothing even leave the application of

if you can help me please alguin
Adobe Creative Cloud because I do not get After Effects among others but I try to install software from the page but I give After Effects download shareware and says downloading but nothing comes give him retrying but nothing even leave the application of Adobe Creative but nothing help

Without proper system info and otehr technical details nobody can tell you anything.
Mylenium

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

TS1538 ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
 Cheers, Tom

After aborted rebuild in Mail: I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up

I have searched quite a bit to find a resolution to this problem, with no success. Any help would be appreciated.
I decided to rebuild my inboxes by following this advice: http://support.apple.com/kb/PH11704. The rebuild took several hours and at 96% (4 minutes remaining apparently), the indexing froze (that is, after 8 hours, the message was still telling me "4 minutes left"). I forced quit mail, restored the previous Envelope files from the trash, and everything seemed fine.
However, since this failed attempt, I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up. All messages in my various inboxes have the reloading problem, EXCEPT messages that I downloaded since the aborted rebuild (in other words, there are about 40 messages that I downloaded since I tried the rebuild and I have no problem with these). The other 70,000 messages however wont load, even though I can see them in the centre pane and spotlight has no problem finding them and showing me their contents (when I hover the mouse over the message). When I click on the message in spotlight, mail opens and the loading problem re-occurs.
Since then, based on various suggestions I found for similar issues, I have used Disk Utility to verify and repair permissions and the drive. I used Onix to rebuild the Mail index (that only took about a minute - I am not sure how to interpret this when compared to the hours the rebuild took with Mail). No joy, I still have the same problem. I even restored one of my inboxes via Time Machine and the same issue with loading continues.
I am using ML 10.8.2. I have a combination of IMAP accounts (work) and POP accounts (personal). The issue of loading occurs irrespective of the account.
I am baffled and am now considering migrating to either Thunderbird or Postbox 3 to try and solve my problem. I prefer to stay with Mail. I should note also that I am using MailTags with Mail (http://www.indev.ca/MailTags.html), although I have not used any of the features. I upgraded to ML from SL about 2 weeks ago. It was very smooth and there appear to be no issues (not sure how helpful this is and probably not at all related to this issue).
Any suggestions much appreciated!

Maybe these will help:
https://discussions.apple.com/message/17677533#17677533
https://discussions.apple.com/message/18324129#18324129
https://discussions.apple.com/message/18203126#18203126

"I have pages 5.1 but when I try to open a page on my desk top.. a message comes up - You need a newer version of pages to open this document. How do I set my computer to open a page?"

"I have Pages 5.1 but when I try to open a page on my desk top.. a message comes up - You need a newer version of pages to open this document. How do I set my computer to open a page on my desktop?"

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Pages 5 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Note: Apple has removed over 90 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

I am syncing my ipod but it comes up with a error saying itunes could not backup the ipod because the backup was corrupt or not compatible with the ipod, what do i do?

i am syncing my ipod but it comes up with a error saying itunes could not backup the ipod because the backup was corrupt or not compatible with the ipod, what do i do?

As I said the iTunes program on the computer. You open iTunes on the computer and go to the View menue in the upper rightand then click on preferences. Go to Devices and delete the backup.

I am trying to burn a dvd on my mac book pro but it comes up with an error code 0x80020022. How do I fix it? Thanks

I am trying to burn a dvd on my mac book pro but it comes up with an error code 0x80020022. How do I fix it? I have tried rebooting through PRAM and various other options that I found online, but nothing has helped.
Thanks

Try using a different brand of DVD's.

Grahic frame on master but graphic comes in in its own frame on active page

Similar Messages

Maybe you are looking for