Grain on screen only in PS Elements

Hi,
I have a lot of problem with seeing grain on photo during editing. It is only vissible in PS Elements while for example windows 8 photo viewer doesnt have that problem. Even my friend on Photoshop CS doesnt have that sort of problem. The grain isnt vissible on 25%, 50%,75% and 100% of zoom.
I tried to find a specific option in the programm without any results.

Since photoshop elements uses interpolation to show your photo on the screen except at 100% view (actual pixels), the only way to really judge your photo is at 100% view.
Though most photos tend to look okay at 25 and 50% views.
Later versions of photoshop with open gl drawing enabled do tend to smooth out how photos look at other views than 100%, so you might not see the grain as much.

Similar Messages

Enhance OVZ9 Screen with a new element

Dear Experts,
I know this has been discussed earlier and I had already searched through the forums to see an answer, but I could not find any and hence I am posting this here.
We have the following business requirement in the ECC ATP functionality.
1) We have different types of deliveries ( say QR delivery and normal delivery )
2) We do the ATP check during delivery creation and when we create the normal deliveries ( customer shipments ), we would like to exclude the already created QR deliveries from the ATP situation so that the customer shipments get the confirmation.
To achieve this, we would like to enhance the OVZ9 screen with a new element say "QR delivery" and we would like to keep it unchecked so that when a normal delivery gets created these QR delivery elements are unselected in the Scope of check and the confirmation is given to customer delivery ( normal delivery ).
Is this possible ? If yes - I would highly appreciate your guidance on this.
Thanks & Best Regards,
Babu Kilari
SCM APO Consultant

To be honest, I do not know why SAP uses these ATP_* views rather than the database table. I doubt it provides any significant value regarding performance. Then again, I am not a performance person so you would be checking with somebody who has performance knowledge.
we also intend to put this flag in the STO deliveries only for very few of them that undergo a specific process as per our business rules. So, the VBBE entries with this flag will be minimal
I know I said it earlier but I think it is worth re-iterating. The modification you are proposing is so big that you should check if it is really necessary, especially if you are talking about so few deliveries on the system. There could be a danger that you are under-estimating just how much the availability check (i.e. the code you are changing) is used throughout the system.
Another approach you could take is to use the EXIT_SAPLATPC_002 exit. This allows you to manipulate the ATP result. In here, you could just select the entries from VBBE that have the flag set (i.e. the flag that identifies them as STO deliveries). and then add this amount to the confirmed available quantity. So lets take this example:
Stock = 100
Issues = 100 [50 are sales order delivery, 50 are STO delivery].
Your scope of check includes deliveries. So at the moment, there is 0 available. You want that there is still 50 available. T_MDVEX-MNG02 will contain the confirmed available amount (so 0). You could implement a select on VBBE in your exit that searchs for deliveries belonging to STO (based on whatever flag you decide to use). Then your code will total the values of these requirements. In this example, there is just one requirement so total would be 50. Then add the total to T_MDVEX-MNG02. This means you have 50 available in the above example, and not 0.
So in summary, use the exit to:
- Select the STO deliveries from VBBE (using the modified select you were going to use in LATP2FV0)
- Total the quantities from the STO deliveries
- Add the total quantity to the confirmed available quantity (T_MDVEX-MNG02)
I think this approach is better as you can control in the exit when the STO deliveries are to be considered and you are not modifying code in include LATP2FV0 (I would be very wary of modifying that code). For example, you can put in conditions like "IF CHECKING RULE = "B" then do this", or "IF Transaction = then do this".

Can't turn welcome screen back on in elements 10

can't turn welcome screen back on in elements 10

Try clicking on the house icon from the Editor rather than Organizer.
Then click settings and choose Always Launch Elements Organizer Only.
Click to view

When I power up my ipad air the apple logo comes up like it should then the lock screen only comes up for a second or less so I can't swipe it fast enough.

When I power up my iPad Air the Apple Logo comes up like it should then the lock screen only comes up for a second or less so I can't swipe it fast enough to get to the home page. The lock screen just disappears. I have to hit the sleep/wake or home button to bring the lock screen back up so I can swipe it. Have others found this situation with the iPad Air. I have an iPad 2 and it does not happen at all. The Apple store checked it out. One rep said to me this is unusual and had a tech check it out and they said this is normal. If the iPad is suppose to be user friendly, why this extra step to get to the lock screen? Are other owners of the iPad Air having the same problem? If so, what have you done to correct it?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

HT3302 if I take my iphone 5 into an apple store can they replace my cracked screen only?.

My phone slipped out of my hand landing face down on my kitchen floor. the screen is now cracked. nothing else is wrong with my phone and I want to only replace the screen. I don't see a need to get another phone if mine is fine (besides the big crack on the front.) I want to know if I take my phone to an apple store.. will/ can they replace the screen only? I'm not worried about price and I know warranty doesn't cover accidental damage.

Not many Apple Stores are equipped to repair iPhone front glass. If your local Apple Store did, it would be $149. Chances are, though, you will need to pay $229 for a replacement phone.

Enhance OVZ9 Screen with a new element - Is it possible ?

Dear Experts,
I know this has been discussed earlier and I had already searched through the forums to see an answer, but I could not find any and hence I am posting this here.
We have the following business requirement in the ECC ATP functionality ( We have some of our plants not interfaced to gATP due to some restrictions )
1) We have different types of deliveries ( say QR delivery and normal delivery )
2) We do the ATP check during delivery creation and when we create the normal deliveries ( customer shipments ), we would like to exclude the already created QR deliveries from the ATP situation so that the customer shipments get the confirmation.
To achieve this, we would like to enhance the OVZ9 screen with a new element say "QR delivery" and we would like to keep it unchecked so that when a normal delivery gets created these QR delivery elements are unselected in the Scope of check and the confirmation is given to customer delivery ( normal delivery ).
Is this possible ? If yes - I would highly appreciate your guidance on this.
Thanks & Best Regards,
Babu Kilari
SCM APO Consultant

Dear Babu,
sorry, but I am not a developer to answer this question. Please try to contact your local developer or you can
request the development of special functions by SAP Custom Development under
http://www.sap.com/services/portfolio/customdev/index.epx.
as described in note 11.
Hope this helps further.
Regards,
Tibor

How to hide fields which is visible on screen only

Hi,
One of my template contains some controls that are set as visible on screen only, like the reset button. They are used for blank interactive form only. But when combined with xml data file,I donot want the use will see those controls when they review the output pdf file on the screen. Does anybody know what configuration I should set on/off to make it work. I still needs those controls set as visible on screen only. Thanks
Haoming

Haoming,
I do not think this is the right place to ask this question. If you are asking a Flex question, you should try here:http://forums.adobe.com/community/flex
Tom

Custom splash screen only shows up when command line is used...

Hi,
Everything in my Java web start application works perfectly but, the custom splash screen only shows up when command line is used ("C:\Program Files (x86)\Java\jre7\bin>javaws -verbose http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp"), if I use the shortcut on the desktop or in the start menu, the Java 7 splash screen shows up (tested under Windows Vista and Seven). Does someone have any clues?
Thanks...
My jnlp file :
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="6.0+" href="AcSent.jnlp">
<information>
    <title>AcSent : Commande de repas</title>
    <description>AcSent - Commande de repas</description>
    <vendor>AcSent</vendor>
    <homepage href="http://www.xxx.eu" />
    <icon href="acSentIconBiseau.png" />
    <icon href="splashAcSentRC.png" kind="splash" />
    <shortcut online="true">
      <desktop />
      <menu submenu="AcSent" />
    </shortcut>
</information>
<security>
    <all-permissions />
</security>
<resources>
    <j2se version="1.6+" href="http://java.sun.com/products/autodl/j2se" max-heap-size="128m" />
    <jar href="AcSentJnlpProgressIndicator.jar" download="progress" />
    <jar href="AcSentJnlp.jar" main="true" version="1.0" />
    <property name="jnlp.packEnabled" value="true" />
    <property name="jnlp.versionEnabled" value="true" />
</resources>
<application-desc name="AcSent" main-class="eu.acsent.jnlp.AcSentApplication"
     progress-class="eu.acsent.jnlp.progressindicator.CustomProgress">
</application-desc>
</jnlp>

Hi again,
I made some researches :
- The link in the generated shorcuts ("C:\Windows\SysWOW64\javaws.exe -localfile -J-Djnlp.application.href=http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp "C:\Users\Arnaud\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\46\69c1e9ee-1f252d1a") is not the same as the one I use in the command line ("C:\Program Files (x86)\Java\jre7\bin>javaws -verbose http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp"). Is there a way in the the JNLP file to tell how to generate shortcuts (not the icon, etc., but command line options)?
- This sample (https://blogs.oracle.com/thejavatutorials/entry/changing_the_java_web_start) displays the splash screen when I click on the the generated shortcuts (I use Windows 7). I have copied the ButtonDemo jar file and the JNLP file on my IIS web server (Windows 2008 Server), this time the splash screen does not show up when I click the generated shortcuts but always shows up when I use the command line. Can someone tell me if it is a trouble with IIS ?
Thanks again...

I have set the presence to screen only but the checkbox still prints adobe livecycle

I have set the presence to screen only but the checkbox still prints. I am using adobe LiveCycle design 9 and it is a dynamic form
This check box is part of an action, where when clicked, it copy's the data from one row and puts it in another. It is also in a row that can be added and removed.
But basically I want the check box to appear on the screen but not print (including when the form is converted to a PDF when its completed)

Intel-based Macs: Resetting the System Management Controller (SMC)
Power
The computer sleeps or shuts down unexpectedly.

In the component overview screen of CO01 I want to disable all the field in screen of table control.I want to make it as output screen only.

Hi all
In the component overview screen of CO01 I want to disable all the field in screen of table control.I want to make it as output screen only.
Thanks & Regards,
Rajib.

Isn't that just exactly what transaction CO02 does? CO01 is for creating production orders so what sense does it make to have it display mode only?
Maybe your goal is to stop then end user changing the component assignment that is automatically detected by the system. If so, personally I think a better starting point would be PP configuration or user authorizations rather than looking to change the screen by whatever method. As we don't know what you are trying to achieve it's hard to offer much more advice maybe all you need is to change transaction to CO02

Tv screen only says ITunes and light flashes continually. Can't use.

Tv screen only says ITunes and light flashes continually. Can't use the system.

It is telling you to connect to iTunes via micro usb, as it needs to be restored
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

When i press the on/off my ipod show me the lock screen only half second and goes black.

When i press the on/off my ipod show me the lock screen only half second and goes black.
I try again and works normally. Sometimes do that.
What Happens?

Try the standard fixes:
- Reset. Nothing will belost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

How to remove only the last element of spreadsheet string

I use path to string option to store image path into database and while retrieving the string is again converted into path but it gives out an error as the output of array to spreadsheet string gives out a tab at the end which is unable for the IMAQ read file to recognise.but when i use the path of the image directly into IMAQ readfile the image is opened . so how to remove the tab only at the end of output of the spreadsheet string(whose length can vary)? I have also attached my program with this.
Attachments:
retrieve_images_from_DB.vi ‏65 KB
file_path_to_db_(images).vi ‏40 KB
create_table_for_images.vi ‏45 KB

indhu wrote:
> Thanks for your reply!
> But my problem is to remove only the last element(which is a tab or an
> alphabet) from a spreadsheet string of any length.
If you just want to remove the last character of a string just use the
String Size function reduce the result by one and wire it together with
the string to the Split String function.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

HT201210 I up date my iphone 3G in time on my iphone 3g screen only USB cable photo & itunes name show.Ple. what can i do for restart my iphone.

When i up date my iphone 3G in itunes this time on my iphone 3G screen only USB cable & itunes name sceen & my phone in not working ple . send me what can i do ? thanks.

My mail ID is [email protected]

How to pass selection screen parameters in text elements?

how to pass selection screen parameters in text elements?

don't you mean he other way around. Assign text-elements (selection texts) to select options?
This you do in the menu where you can find text-elements, selection texts.
menu Goto->text elements->selection texts.
Edited by: Micky Oestreich on May 10, 2008 2:45 PM

Grain on screen only in PS Elements

Similar Messages

Maybe you are looking for