Graininess: How to filter it out in post-production?

Hi, all,
I've just imported 3 nights' worth of footage with iMovie HD 6. The camcorder was unmanned the first night (sadly) and the second night I noticed quite a bit of graininess (probably due to the lighting of me being way in the back dimly lit, and the subject being up front with some overhead lighting.) Fixed that up with the camcorder settings for the 3rd night (after visiting www.hv20.com).
Soooo.... is there any way to fix up the footage from the first two nights in post-production with iMovie HD 6? Are there any settings to look at within the app (I'm new to it.) Are there any plug-ins or another app entirely that would help?
Thanks so much!
Deborah
PS in iMovie 08, you can just pick a clip and boost the sound up to 200% Is there a similarly easy way to boost the sound in iMovie HD 6?

consumer camcorders do some marvel: they work in a bright sunlighted winter landsacpe, and with the 'light' of 3 candles under the chrismas tree.
when doing nightshots, your camera rises the gain extremely => 'grain'/noise.
I don't know of any effect, which allows to 'vanish' that.. adding a slight blurr to that scenery would erase the noise, but.. < caugh > blurrs the pics. (this is a widely discussed issue for still photographers too = same probs, even with pro tool Photoshop ..)
there's a free tool http://www.xs4all.nl/~jeschot/home.html#JVC claiming to reduce noise.. never used it, try on your own..
you can raise the volume by rasing the 'rubber band' in the audio track.
some people recommend, to copy/paste the same audio track, which should improve level (never tried).. iMHD6 has limits in audio processing, an export of audio only into some audioapp as Garageband or Audacity and a re-import into your IM project is recommended.

Similar Messages

How Can We Trace Out Delivery Against Production Order

Dear All
How can I check the delivered Qty(invoicing) Against Production Order .
For Egg :-order qty Is 50000
Like 1 P.O-10000
2. P.O-5000
3. P.O-2500
And Despatch Or invoicing of 12500 qty.
Then Through which report i can Find out That 12500 qty Is despatch From 1& 3 PRODUCTION ORDER.
Rgds
Pankaj Agarwal

Hi
yes we can do it
please go to CO02
change prod order
see in header >> goto>> goods movement document
please tell me if any more question or reward
Sunil

How do I find out where the missing filter is used?

After upgrade, Premiere CS4 is complaining missing filter upon opening a CS3 project. How do I find out where the filter is used?
Thanks!

When I have opened older Projects in later versions, I have gotten a very useful dialog screen, telling me of missing Transitions (exact name and TimeCode), and of missing Effects. Do you not get such?
When you Open the CS3 Project, is any Clip flagged?
Considering how well PrPro has picked up on missing 3rd party stuff, I would be surprised, that it did not give you all of the necessary info.
Good luck,
Hunt

How can Siri still tweet and post to Facebook if I just changed my password from the respective websites, with out the iphone "knowing" I changed my passwords?

How can Siri still tweet and post to Facebook if I just changed my password from the respective websites, with out the iphone "knowing" I changed my passwords?

If you buy an iLife '11 install DVD (eBay, Amazon) you could upgrade your iPhoto right away. The earlier iPhoto '11 versions are compatible with MacOS X 10.6.8.
but I can't until I upgrade from OS X 10.6.8. Trying to figure out how to do that...
To upgrade to Mt. Lion see here: You can buy it and download it from the appStore, if your mac is compatible:
http://www.apple.com/osx/how-to-upgrade/

I used Share to post a page on FB. Now I'm getting FB notifications whether I'm logged in to FB or not. How do I log out of Share?

I used Share to post a page on Facebook. Now I'm getting Facebook notifications when I'm logged out of FB. How do I log out of Share, and only log in when I want to use it?

Hi NimaG!
It seems like you may need to adjust your notifications settings for Facebook in order to address this issue:
Mac Basics: Notification Center
http://support.apple.com/kb/ht5362
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

How to use the out parameter of a transformation

Hi All,
I have a requirement where I need to move all the transformations from process flows to map.SO for each transformation I need to have 1 map which calls this transformation.I have 1 transformation which has both input and output parameter.If I use this transformation in mapping then how to use the out parameter of thsi transformation.This out parameter needs to beused in other mappings.Can soemone please help me.
Thansk in advance

Hi,
I'm not quite sure what you are trying to do.
What works: Connect the outgroup of a pre- or post-mapping process operator to the mapping output parameter operator..
What does not work: Connect the outgroup of an operator that can return more than one row (e.g. table operator, filter, joiner ,...) to the mapping output parameter operator. The mapping output parameter just returns "one row", like a pl/sql function call.
You cannot pass a "data stream" from one mapping to another. Maybe the pluggable mappings is what you are looking for.
Regards,
Carsten.

Modifying existing script - modifying how data is written out to csv

I have an existing script written in Powershell 3.0 that gathers data from my virtual machines. It's working to give me the data, but I'd like to modify how it writes it out. Currently the data looks as follows:
I would prefer the output to be all one one line as follows:
Here is my script. How would I modify this to give me the .csv file with all data for each server on one line?
#param (
$inputFile = "C:\Apps\Powershell\IP_Mac\testlist.txt"
$csvFile = "C:\Apps\Powershell\IP_Mac\results.csv"
$report = @()
foreach($Computer in (gc -Path $inputFile)){
get-wmiobject -computer $Computer win32_logicaldisk -filter "drivetype=3" | ForEach-Object {
$device = $_.deviceid
$freespce = ($_.freespace/1GB).tostring("0.00")+"GB"
$Totalspce = ($_.size/1GB).tostring("0.00")+"GB"
if(Test-Connection -ComputerName $Computer -Count 1 -ea 0) {
$Networks = Get-WmiObject Win32_NetworkAdapterConfiguration -ComputerName $Computer | ? {$_.IPEnabled}
foreach ($Network in $Networks) {
$IPAddress = $Network.IpAddress[0]
$SubnetMask = $Network.IPSubnet[0]
$DefaultGateway = $Network.DefaultIPGateway
$DNSServers = $Network.DNSServerSearchOrder
$MACAddress = $Network.MACAddress
$OutputObj = New-Object -Type PSObject
$OutputObj | Add-Member -MemberType NoteProperty -Name ComputerName -Value $Computer.ToUpper()
$OutputObj | Add-Member -MemberType NoteProperty -Name IPAddress -Value $IPAddress
$OutputObj | Add-Member -MemberType NoteProperty -Name SubnetMask -Value $SubnetMask
$OutputObj | Add-Member -MemberType NoteProperty -Name Gateway -Value ($DefaultGateway -join “,”)
$OutputObj | Add-Member -MemberType NoteProperty -Name DNSServers -Value ($DNSServers -join ",")
$OutputObj | Add-Member -MemberType NoteProperty -Name MACAddress -Value $MACAddress
$OutputObj | Add-Member -MemberType NoteProperty -Name device -Value $device
$OutputObj | Add-Member -MemberType NoteProperty -Name Totalspce -Value $Totalspce
$OutputObj | Add-Member -MemberType NoteProperty -Name freespce -Value $freespce
#$OutputObj
$report += $OutputObj
Write-Output $report
$report | Select-Object -Property $properties | Export-Csv -Path $csvFile -NoTypeInformation
Thank you.

Try it like this:
#param (
$inputFile = "C:\Apps\Powershell\IP_Mac\testlist.txt"
$csvFile = "C:\Apps\Powershell\IP_Mac\results.csv"
$report = foreach($Computer in (gc -Path $inputFile)){
$devices = get-wmiobject -computer $Computer win32_logicaldisk -filter "drivetype=3" | ForEach-Object {
$device = $_.deviceid
$freespce = ($_.freespace/1GB).tostring("0.00")+"GB"
$Totalspce = ($_.size/1GB).tostring("0.00")+"GB"
New-Object PSObject -property @{device=$device;freespce=$freespce;Totalspce=$Totalspce}
if(Test-Connection -ComputerName $Computer -Count 1 -ea 0) {
$Networks = Get-WmiObject Win32_NetworkAdapterConfiguration -ComputerName $Computer | ? {$_.IPEnabled}
foreach ($Network in $Networks) {
$IPAddress = $Network.IpAddress[0]
$SubnetMask = $Network.IPSubnet[0]
$DefaultGateway = $Network.DefaultIPGateway
$DNSServers = $Network.DNSServerSearchOrder
$MACAddress = $Network.MACAddress
$OutputObj = New-Object -Type PSObject
$OutputObj | Add-Member -MemberType NoteProperty -Name ComputerName -Value $Computer.ToUpper()
$OutputObj | Add-Member -MemberType NoteProperty -Name IPAddress -Value $IPAddress
$OutputObj | Add-Member -MemberType NoteProperty -Name SubnetMask -Value $SubnetMask
$OutputObj | Add-Member -MemberType NoteProperty -Name Gateway -Value ($DefaultGateway -join “,”)
$OutputObj | Add-Member -MemberType NoteProperty -Name DNSServers -Value ($DNSServers -join ",")
$OutputObj | Add-Member -MemberType NoteProperty -Name MACAddress -Value $MACAddress
$i = 0
Foreach ($dev in $devices) {
$OutputObj | Add-Member -MemberType NoteProperty -Name device$i -Value $dev.device
$OutputObj | Add-Member -MemberType NoteProperty -Name Totalspce$i -Value $dev.Totalspce
$OutputObj | Add-Member -MemberType NoteProperty -Name freespce$i -Value $dev.freespce
$i ++
$OutputObj
Write-Output $report
$report | Select-Object -Property $properties | Export-Csv -Path $csvFile -NoTypeInformation
You were writing a row for each drive, I basically just wrote the drive information to an array and looped through that array when adding members. I tested this and it worked for me. Note that you can't have the same value names when you add-member
so I appended a numeral to differentiate them.
I hope this post has helped!

How can I print out the contents of my hardrive

I have a hardrive with about 200 video clips and need to print the titles for cross refrerencing. I was just going to "grab" screenshots but this will take about ten sheets of paper. How can I print out a list of all the files on the drive?

I tried this Finder drag method & discovered that it is very important to set the blank TextEdit document to plain text before the drag (from the format menu or with Cmd-shift-t). If you don't, TextEdit attempts to load the content of the files!
Once I discovered this, I tried the method with Find (Cmd-F) results & it works for that, too. This means that by choosing the right combination of search location(s) & search criteria, you can extend the method to filter the list to just about any files you want, which could be very handy.
For instance, set the "Kind" criteria to "QuickTime Movie" & location to "Computer" & you get a list of every QT movie. Or set the search location to the folder containing the movies of interest & you get all of them, including ones in subfolders. You could also use the 'date created' or other search criteria to filter the list to a specific subset of movies (or whatever).
If you need to do this often, you could create one or more 'Smart Folders' with the criteria preloaded for each search.
The only drawback I see for either Finder based method is the full path one. If you are getting results from just one or a few folders, Find & Replace can delete any of the path name fairly easily, but it becomes a chore if there are a lot of different ones. Some other text editor, like TexEdit Pro, that supports grep searches would be handy here, but since I'm not up to speed on grep, someone else will have to explain how to use it for this, if they want.

How can we find out data in an editable ALV grid has been changed or not?

Hi Experts,
How can we find out whether a data in an editable ALV grid has been changed or not.
I am using the
FM -> REUSE_ALV_GRID_DISPLAY_LVC
for ALV display.
I have to chekc whther data has been changed or not befor saving. if changed then only i want to
SAVE
. I cannot use the internal table comparison method for this purpose also i am not using OOP ALV.
So kindly sugest me an alternative.
Thanks and Regards,
Shahana

Hi,
Thanks for your answer. I already saw this post.
See this method.
CALL METHOD reuse_alv_grid->check_changed_data
IMPORTING
e_valid = lv_check.
This will update the internal table with the edited values. Then we can go for internal table comparison.
But my scenario will not allow me for itab comparisons.I just want to know the ALV data has been changed or not.
Regards,
Shahana

R12: How to filter Open Item Revaluation Report based on GL Date

Hi,
Anybody know how to filter Open Item Revaluation Report based on GL Date from and GL Date to in R12?
Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
We need to run the report only for specific date only. Please share with me if anyone know about this.
Thanks.

Pl do not post duplicates - R12: How to filter Open Item Revaluation Report based on GL Date

How to use the "out" parameter in idl

hello.idl:
module HelloApp
interface Hello
string sayHello();
void getPass(in string name,out string pass);
HelloServer:
public class HelloServer
class HelloServant extends _HelloImplBase
public void getPass(String name,org.omg.CORBA.StringHolder pass)
System.out.println("Server pass = " + pass);
if (name.equals("lxh"))
pass = new org.omg.CORBA.StringHolder("1234");
if (name.equals("cbj"))
pass = new org.omg.CORBA.StringHolder("5678");
HelloClient:
public class HelloClient
public static void main(String args[])
try{
org.omg.CORBA.StringHolder Pass = null;
if (args.length == 1)
System.out.println("Client pass = " + args[0]);
helloRef.getPass(args[0],Pass);
System.out.println(Pass);
} catch(Exception e) {
When I run client main method with parameter "lxh",I will get a error says the getPass() parameter which has given is wrong.
How to use the out parameter in client?

Does this error only occurs if you pass "lxh" or always?
Did you try passing a StringHolder Object rather than a NULL Object?
Perhaps you can post the error message!?

Suddenly, I've been put on multiple threads over multiple firefox problems, which is filling up my inbox. How do I get out of these?

Details? I posted a question about one problem (for which no answers have been offered, but that's okay) and somehow, I've become part of multiple threads about various firefox problems. I have no interest in any of these questions/problems.
How do I get out of these threads? I get about 15-20 emails a day! Firefox is by far the worst community I've even been dragged into....

Sorry you are having problems.
Have a look at your settings in the dropdown from the username or https://support.mozilla.org/en-US/users/settings
Not too sure what you could subscribe to accidentally that causes that behaviour though.
It would be interesting to know what option caused all the email. If something has gone wrong and you are getting e-mails that you should not be getting we can refer this to the admins to look into. The Firefox sumo community certainly does not intentionally spam, and if you are having a problem lets find out more, because others may have a problem and not have reported it.

HP 3050 how can I print out the printercode / e-mailadress of the printer??

HP 3050 XP/7
For using the ePrintserviceI have to fill in the printercode / e-mailadress of the printer. How can I print out these informations. I already printetd out the Net configuration page (Netzwerkkonfigurationsseite) and the printerstatus (Druckerstatusbericht). I can find URL, Hostname but not printercode / e-mailadress.
I´m not sure if I enabled the webservice of the printer.How can I check this setting and how can I enable webservice.
Posts in German language would be great, but english is ok as well.
THX very much!!

Hello oli-b,
The DeskJet 3050 does not have the Web Services feature which allows ePrint and the email address of the printer. The printer you would need is the DeskJet 3050A which includes these features.
If this is what you have then you would need to connect your printer to the wireless network using the setup CD software that was included with the printer. Once you have successfully connected to the wireless network, there should be an ePrint button on the printer that allows you to access the Web Services menu and enable this feature and give your printer an email address for ePrint.
Hope this helps.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How can I print out a small size address book in Leopard?

How can I print out my address book in Leopard, preferably in pocket size and preferably
without each card having a separate page?

First off, you've posted in the Tiger forum, even though your profile says you're running Snow Leopard. Even worse, you're asking about Leopard. You need to be sure you post your questions in the corrrect forum.
As for the question itself, all you have to do is select the Group you want to print in Address Book, choose Print, select 'Pocket Address Book' from the pop-up Style menu, check the attributes you want included for each contact, and the paper size you want to use and Print.

How can i find out serial no of torch 9800 without the phone.

How do I find out serial no of my torch 9800 without the physical phone ( is it in the packaging to the brand new phone?) so that I can report it being stolen and alert anyone buying a stolen hanset in 2nd hand Market. Who should I report it having been stolen after repotted it having been stolen to the police.

Your cell carrier would have a record of it. They might even blacklist the phone so nobody else can use it.
Give them a call to see what they will do for you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Graininess: How to filter it out in post-production?

Similar Messages

Maybe you are looking for