Grand Total formula different from Subtotals

Hi,
i've a question. Suppose i have a normal table (No pivot) with 2 columns: Month and Salary percentage on Month.
In addition i have subtotals on Month column and a Grand Total. I have a situation like this:
Month Salary percentage on Month
30
January 20
50
January Subtotal 100
20
February 70
10
February Subtotal 100
Grand Total 200
In Salary percentage on Month field I have as aggregation rule Sum because i want that subtotals are the sum of single rows of the month.
But i don't want this for grand total. It should be 100 (max of subtotals).
Is it possible specify a different formula for Grand Total respect to that used for Subtotals?
Thanks
Giancarlo

If your formula already contains any summarized fields then you cannot summarize that formula. Try creating a mannual running total like this
whileprintingrecords;
numbervar i;
i:=i+@formula;
Now place this formula in group footer or header and suppress this formula. Create a new formula like
whileprintingrecords;
numbervar i;
Place this in report footer which shows the grand total.
Reagrds,
Raghavendra

Similar Messages

Total Cost differes from Amount in T-Code S_AHR_61016404

Hi All,
As far as my understanding goes, the Total cost and Amount should be the same value in T-Code S_AHR_61016404 (Cost Assignment for Trip) but i am getting different values in Total cost and Amount in this report. Could you please throw some light as what could be the possible reasons for this difference?
Regards,
Kumar.

First of please check which expense type amounts are showing wrong.. (i.e actual Reimbursable but showing company paid or company paid but showing as reimbursable)
After finding effected expense type, please check from table se16 and then T706B1.
Regards,
Muhammad Umer

How to show grand total at bottom in Pivot view?

Hi All,
How to show the report Grand total at bottom in pivot table?Plz help.
Regards,
Vaishnavi

Hi ,
Thanks for the reply but My report structure is like below:
AAA,BBB,CCC,DDD,EEE,FFF,GGG,HHH & III my report columns.I have arranged those columns in measure & i have to calculate the variance against each column like below structure.As per the report here I have lto calculate variance for 4 columns like AAA,BBB,CCC,DDD & after that total of each..then again variance for EEE,FFF & their total.After that i have to show grand total of all from AAAA to FFF likewise for rest of fields.
Measures           variance
AAA(db column)          1
BBB(db column)          2
CCC(db column)     3
DDD(db column
Total     6
EEE(db column)     4
FFF(db column) 5
Total     9
Grand Total(AAA TO FFF)     15
GGG(db column)     6
Total     6
Grand Total(AAA TO GGG) 21
III(db column)
Grand Total(AAA TO III)
How to do that?
Regards,
Sonal
Edited by: Sonal on Jan 11, 2012 9:06 AM
Edited by: Sonal on Jan 11, 2012 9:15 AM
Edited by: Sonal on Jan 11, 2012 9:17 AM

Specific aggregation for Grand total

Hi all,
Is it possible to specify a function instead of the provided list of aggregation rules in answers or in the rpd.
I'd like to calculate SUM(Xi)/SUM(count(Xi)) and display it as a grand total
__________Column X
___________10
___________20
___________30
Grand total 20 (60/3=20)
Regards

what is the grand total formula you are expecting?
if you post it here we can sort it out.
You can find the 'Combine with similar Request' option in the criteria.
click on that and select your subject area and select the exact columns you used in your report. Now in this report change the formula to the one you want.
in your first column delete the formula and simply type 'Grand Total' and in the second column type
sum(column_name)/count(column_name)
you can ref to this link. just take how they are using 'UNION' request in the example. Though the link is not totally relevant to you it will help you.
http://oraclebizint.wordpress.com/2008/01/25/oracle-bi-ee-101332-dynamic-column-headers-using-presentation-variables-sets-and-conditional-formatting/

How to summarize the formula field for grand total

Hi All
Iam desinging a report in which iam facing a problem to summarize the formula field . This formula field contains sum calculation like
formula name is @sales
Sum ({@DTM200}, {@SaleMan})+Sum ({@DTM500}, {@SaleMan})+
Sum ({@TM500}, {@SaleMan})+Sum ({@TM1000}, {@SaleMan})+
Sum ({@HTM500}, {@SaleMan})+Sum ({@HTM1000}, {@SaleMan})+
Sum ({@WM500}, {@SaleMan})+Sum ({@WM1000}, {@SaleMan})+
Sum ({@CURD}, {@SaleMan})+Sum ({@Buttermilk}, {@SaleMan})+
Sum ({@BULKWM}, {@SaleMan})+Sum ({@BULKTM}, {@SaleMan})
the fields are summary fields and iam calculating all these fields to get the final result . Upto this it is working fine but finally i want to calculate the grand total of this formula '@sales' how should do this
Thanks in advance

Hi,
If your formula name is @Sales you click the @Sales formula then Click Insert from Menu bar and click Summary.
Then click Grand Total.
Regards,
Clint

How to create a running total formula for different calendar years

Hello everyone,
I am looking for some help in creating a running total formula for different calendar years in Oracle. This is what I currently have organized in the crosstab report: vertically I have the cities from our database organized, then horizontially have the following information for each city:
2006 /2007 /2008
Amount /Amount Spent /Unspent Amount Amount Recieved/Amount Spent /Unspent Amount Amount Recieved/Amount Spent/Unspent Amount
Recieved
I am trying to create a formula that will specify each calendar year. For example, I'd like to have a formula in 2007 which would total the: 2007= {2006 unspent amount + the unspent amount in 2007} and same for 2008= {2007 unspent amount + the unspent amount in 2008}. I hope this is clear, I have simplified the report into a basic interpretation of what i've been trying to accomplish.
Would anybody know if this is possible and how to approach this?
Really appreciate it! Thanks.
Alex

Hi,
you can try and define a running total as a calculation in the crosstab as:
sum(Unspent Amount) over (partition by city order by year)
i find the crosstab format comfusing sometime since the aggregation is auto applied.
I would start with a flat table and then "duplicate is as a cross tab"
for your running total you can sort the data by the city,year and get it to 3 lines for each city, for example:
city year Unspent Amount all other amount...
X 2007 10
X 2008 20
X 2009 30
Y 2007 5
Y 2008 15
Y 2009 25
then you can use a funtion to calculate the amount :
sum(Unspent Amount) over (partition by city order by year)
this is the sql i used just to check it:
SELECT city,year,"Unspent Amount"
,SUM("Unspent Amount") over (PARTITION BY city ORDER BY YEAR)
FROM (
SELECT 'X' city, 2007 YEAR, 10 "Unspent Amount" FROM dual UNION ALL
SELECT 'X', 2008 ,20 FROM dual UNION ALL
SELECT 'X', 2009 , 30 FROM dual UNION ALL
SELECT 'Y', 2007 , 5 FROM dual UNION ALL
SELECT 'Y', 2008 , 15 FROM dual UNION ALL
SELECT 'Y', 2009 , 25 FROM dual
Tamir

Grand Total on Formula

I have a quantity field in my main report that I passed off to my subreport. In the subreport I took the quantity field and placed it in a formula ({@Valuation Material Costs}*{@Qty from Main Report}). This is placed in the Group Header. Now I want to setup a grand total of this formula but I can not figure out how to get there. Any ideas?

If your formula already contains any summarized fields then you cannot summarize that formula. Try creating a mannual running total like this
whileprintingrecords;
numbervar i;
i:=i+@formula;
Now place this formula in group footer or header and suppress this formula. Create a new formula like
whileprintingrecords;
numbervar i;
Place this in report footer which shows the grand total.
Reagrds,
Raghavendra

COMPUTE function: How to get subtotals and GRAND total together?

I am wrtiting a report using SQL and SQL*Plus to get subtotals and a grand total. The COMPUTE function allows me to COMPUTE SUM on a group, but it only gives me subtotals. I'm interested in getting a report with the SUBTOTALS and a final GRAND TOTAL. Can this be done using SQL*Plus?
Here is my current code that gives me subtotals:
COMPUTE SUM LABEL subtotal OF sal ON deptno
SELECT ename, sal, deptno
FROM emp
ORDER BY deptno;
ENAME             SAL     DEPTNO
CLARK            2450         10
VOLLMAN          5000
MILLER           1300
                 8750 subtotal
SMITH             800         20
ADAMS            1100
FORD             3000
SCOTT            3000
JONES            2975
                10875 subtotal
ALLEN            1600         30
BLAKE            2850
MARTIN           1250
JAMES             950
TURNER           1500
WARD             1250
                 9400 subtotalHere is the code to give one grand total:
Column DUMMY NOPRINT
COMPUTE SUM OF sal ON DUMMY
BREAK ON DUMMY
SELECT NULL DUMMY, ename, sal, deptno
FROM emp
ORDER BY deptno;
ENAME             SAL     DEPTNO
CLARK            2450              10
VOLLMAN          5000          10
MILLER           1300          10
SMITH             800              20
ADAMS            1100          20
FORD             3000          20
SCOTT            3000          20
JONES            2975          20
ALLEN            1600              30
BLAKE            2850          30
MARTIN           1250          30
JAMES             950          30
TURNER           1500          30
WARD             1250          30
                29025
How can I combine both on one report?

Massimo Ruocchio wrote:
Do you like this?I believe OP is looking for both department totals and grand total. Frank already showed how to do it in SQL*Plus. To do it in SQL:
SELECT CASE GROUPING_ID(real_deptno,real_ename)
          WHEN 0 then real_ename
          WHEN 1 then 'Department ' || real_deptno || ' total'
          ELSE 'All department total'
        END ename,
        SUM(sal),
        deptno
FROM (
         SELECT deptno real_deptno,
                 ename real_ename,
                 sal,
                 CASE ROW_NUMBER() OVER(PARTITION BY deptno order by ename) WHEN 1 THEN deptno end deptno
           FROM emp
GROUP BY GROUPING SETS((),real_deptno,(real_deptno,deptno,real_ename))
ORDER BY real_deptno nulls last,
           real_ename nulls last
ENAME                  SUM(SAL)     DEPTNO
CLARK                      2450         10
KING                       5000
MILLER                     1300
Department 10 total        8750
ADAMS                      1100         20
FORD                       3000
JONES                      2975
SCOTT                      3000
SMITH                       800
Department 20 total       10875
ALLEN                      1600         30
ENAME                  SUM(SAL)     DEPTNO
BLAKE                      2850
JAMES                       950
MARTIN                     1250
TURNER                     1500
WARD                       1250
Department 30 total        9400
All department total      29025
18 rows selected.
SQL> SY.

Inserting a Grand Total on formulas with variables

Post Author: MikeA-ICE
CA Forum: Formula
I'm working on a subreport that displays the amounts of items 1-4 in the details band. They contain a quantity and I am performing a calculation where I multiply the quantity of those items by the total of the main report. The main report passes its Grand Total to the subreport via the "Store/Fetch" function and the calculation works perfectly. However, when I try to get a Grand Total of those items, that option isn't available. I tried to build a standalone formula to do this (SUM (Markup$) but it didn't work. How can I get the total value of items 1-4 so I can send it back to the main report to do more calculations on?
Thanks for the help,
Mike
Edit - (per the Forums Usage Tips)
Crystal 11 (11.0.0.1994)
Latest Monthly Hot Fix installed
Windows Vista (Business Edition)
Access Database

Post Author: MikeA-ICE
CA Forum: Formula
Thanks Jagan. I'll check that out. I've been using the Store/Fetch function for years and it works well. My problem is generating a total to send back to the main report. Basically, I'm trying to send a value from the main report to the subreport to use in a calculation, then send send the total of that calculation back to the main report from the subreport. But I can't get Crystal to allow me to insert a subtotal on the 1st calculation in the subreport.

Alv subtotals and grand total for a field

Hi friends,
I Have an internal table ITAB1
in that i have a senario as below.
In my GRID display iam getting values in the layou as follows
BUKRS = 1000
LIFNR      MATNR     STCST
100          abc            500,00
100          pqr             400,00
100          xyz            200,00
                    sub total
200         pto              700,00
200         vbr              900,00
                    sub total
BUKRS = 2000
LIFNR      MATNR     STCST
150          abc            500,00
150          pqr             400,00
150          xyz            200,00
                    sub total
260         pto              700,00
260         vbr              900,00
                    sub total
          GRAND TOTAL =
Now my requirement is at the end of every vendor i need sub total for STCST field.
and at the end of every company code i need GRAND TOTAL for STCST field.
Its alv grid display.
how can i do that.
Regards,
Priyanka.

Check this sample code may it will help u:
*& Report Z_ALV_SUBTOTAL
REPORT z_alv_subtotal.
*& Table declaration
TABLES: ekko.
*& Type pool declaration
TYPE-POOLS: slis. " Type pool for ALV
*& Selection screen
SELECT-OPTIONS: s_ebeln FOR ekko-ebeln.
*& Type declaration
* Type declaration for internal table to store EKPO data
TYPES: BEGIN OF x_data,
       ebeln TYPE char30, " Document no.
       ebelp TYPE ebelp,   " Item no
       matnr TYPE matnr,   " Material no
       matnr1 TYPE matnr,   " Material no
       werks TYPE werks_d, " Plant
       werks1 TYPE werks_d, " Plant
       ntgew TYPE entge,   " Net weight
       gewe   TYPE egewe,   " Unit of weight
       END OF x_data.
*& Internal table declaration
DATA:
* Internal table to store EKPO data
i_ekpo TYPE STANDARD TABLE OF x_data INITIAL SIZE 0,
* Internal table for storing field catalog information
i_fieldcat TYPE slis_t_fieldcat_alv,
* Internal table for Top of Page info. in ALV Display
i_alv_top_of_page TYPE slis_t_listheader,
* Internal table for ALV Display events
i_events TYPE slis_t_event,
* Internal table for storing ALV sort information
i_sort TYPE slis_t_sortinfo_alv,
i_event TYPE slis_t_event.
*& Work area declaration
DATA:
wa_ekko TYPE x_data,
wa_layout     TYPE slis_layout_alv,
wa_events         TYPE slis_alv_event,
wa_sort TYPE slis_sortinfo_alv.
*& Constant declaration
CONSTANTS:
   c_header   TYPE char1
              VALUE 'H',                    "Header in ALV
   c_item     TYPE char1
              VALUE 'S'.
*& Start-of-selection event
START-OF-SELECTION.
* Select data from ekpo
SELECT ebeln " Doc no
         ebelp " Item
         matnr " Material*
         matnr " Material*
         werks " Plant*
         werks " Plant*
         ntgew " Quantity
         gewei " Unit
         FROM ekpo
         INTO TABLE i_ekpo
         WHERE ebeln IN s_ebeln
         AND ntgew NE '0.00'.
IF sy-subrc = 0.
    SORT i_ekpo BY ebeln ebelp matnr .
ENDIF.
* To build the Page header
PERFORM sub_build_header.
* To prepare field catalog
PERFORM sub_field_catalog.
* Perform to populate the layout structure
PERFORM sub_populate_layout.
* Perform to populate the sort table.
PERFORM sub_populate_sort.
* Perform to populate ALV event
PERFORM sub_get_event.
END-OF-SELECTION.
* Perform to display ALV report
PERFORM sub_alv_report_display.
*&      Form sub_build_header
*       To build the header
*       No Parameter
FORM sub_build_header .
* Local data declaration
DATA: l_system     TYPE char10 ,          "System id
        l_r_line     TYPE slis_listheader, "Hold list header
        l_date       TYPE char10,           "Date
        l_time       TYPE char10,           "Time
        l_success_records TYPE i,           "No of success records
        l_title(300) TYPE c.                " Title
* Title Display
l_r_line-typ = c_header.               " header
l_title = 'Test report'(001).
l_r_line-info = l_title.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR l_r_line.
* Run date Display
CLEAR l_date.
l_r_line-typ = c_item.                " Item
WRITE: sy-datum TO l_date MM/DD/YYYY.
l_r_line-key = 'Run Date :'(002).
l_r_line-info = l_date.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR: l_r_line,
         l_date.
ENDFORM.                    " sub_build_header
*&      Form sub_field_catalog
*       Build Field Catalog
*       No Parameter
FORM sub_field_catalog .
* Build Field Catalog
PERFORM sub_fill_alv_field_catalog USING:
     '01' '01' 'EBELN' 'I_EKPO' 'L'
     'Doc No'(003) ' ' ' ' ' ' ' ',
     '01' '02' 'EBELP' 'I_EKPO' 'L'
     'Item No'(004) 'X' 'X' ' ' ' ',
     '01' '03' 'MATNR' 'I_EKPO' 'L'
     'Material No'(005) 'X' 'X' ' ' ' ',
     '01' '03' 'MATNR1' 'I_EKPO' 'L'
     'Material No'(005) ' ' ' ' ' ' ' ',
     '01' '04' 'WERKS' 'I_EKPO' 'L'
     'Plant'(006) 'X' 'X' ' ' ' ',
     '01' '04' 'WERKS1' 'I_EKPO' 'L'
     'Plant'(006) ' ' ' ' ' ' ' ',
     '01' '05' 'NTGEW' 'I_EKPO' 'R'
     'Net Weight'(007) ' ' ' ' 'GEWE' 'I_EKPO'.
ENDFORM.                    " sub_field_catalog
*&     Form sub_fill_alv_field_catalog
*&     For building Field Catalog
*&     p_rowpos   Row position
*&     p_colpos   Col position
*&     p_fldnam   Fldname
*&     p_tabnam   Tabname
*&     p_justif   Justification
*&     p_seltext Seltext
*&     p_out      no out
*&     p_tech     Technical field
*&     p_qfield   Quantity field
*&     p_qtab     Quantity table
FORM sub_fill_alv_field_catalog USING p_rowpos    TYPE sycurow
                                        p_colpos    TYPE sycucol
                                        p_fldnam    TYPE fieldname
                                        p_tabnam    TYPE tabname
                                        p_justif    TYPE char1
                                        p_seltext   TYPE dd03p-scrtext_l
                                        p_out       TYPE char1
                                        p_tech      TYPE char1
                                        p_qfield    TYPE slis_fieldname
                                        p_qtab      TYPE slis_tabname.
* Local declaration for field catalog
DATA: wa_lfl_fcat    TYPE slis_fieldcat_alv.
wa_lfl_fcat-row_pos        = p_rowpos.     "Row
wa_lfl_fcat-col_pos        = p_colpos.     "Column
wa_lfl_fcat-fieldname      = p_fldnam.     "Field Name
wa_lfl_fcat-tabname        = p_tabnam.     "Internal Table Name
wa_lfl_fcat-just           = p_justif.     "Screen Justified
wa_lfl_fcat-seltext_l      = p_seltext.    "Field Text
wa_lfl_fcat-no_out         = p_out.        "No output
wa_lfl_fcat-tech           = p_tech.       "Technical field
wa_lfl_fcat-qfieldname     = p_qfield.     "Quantity unit
wa_lfl_fcat-qtabname       = p_qtab .      "Quantity table
IF p_fldnam = 'NTGEW'.
    wa_lfl_fcat-do_sum = 'X'.
ENDIF.
APPEND wa_lfl_fcat TO i_fieldcat.
CLEAR wa_lfl_fcat.
ENDFORM.                    " sub_fill_alv_field_catalog
*&      Form sub_populate_layout
*       Populate ALV layout
*       No Parameter
FORM sub_populate_layout .
CLEAR wa_layout.
wa_layout-colwidth_optimize = 'X'." Optimization of Col width
ENDFORM.                    " sub_populate_layout
*&      Form sub_populate_sort
*       Populate ALV sort table
*       No Parameter
FORM sub_populate_sort .
* Sort on material
wa_sort-spos = '01' .
wa_sort-fieldname = 'MATNR'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
* Sort on plant
wa_sort-spos = '02'.
wa_sort-fieldname = 'WERKS'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
ENDFORM.                    " sub_populate_sort
*&      Form sub_get_event
*       Get ALV grid event and pass the form name to subtotal_text
*       event
*       No Parameter
FORM sub_get_event .
CONSTANTS : c_formname_subtotal_text TYPE slis_formname VALUE
'SUBTOTAL_TEXT'.
DATA: l_s_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 4
    IMPORTING
      et_events       = i_event
    EXCEPTIONS
      list_type_wrong = 0
      OTHERS          = 0.
* Subtotal
READ TABLE i_event INTO l_s_event
                    WITH KEY name = slis_ev_subtotal_text.
IF sy-subrc = 0.
    MOVE c_formname_subtotal_text TO l_s_event-form.
    MODIFY i_event FROM l_s_event INDEX sy-tabix.
ENDIF.
ENDFORM.                    " sub_get_event
*&      Form sub_alv_report_display
*       For ALV Report Display
*       No Parameter
FORM sub_alv_report_display .
DATA: l_repid TYPE syrepid .
l_repid = sy-repid .
* This function module for displaying the ALV report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = l_repid
      i_callback_top_of_page   = 'SUB_ALV_TOP_OF_PAGE'
      is_layout                = wa_layout
      it_fieldcat              = i_fieldcat
      it_sort = i_sort
      it_events                = i_event
      i_default                = 'X'
      i_save                   = 'A'
    TABLES
      t_outtab                 = i_ekpo
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
*    MESSAGE i000 WITH 'Error in ALV report display'(055).
ENDIF.
ENDFORM.                    " sub_alv_report_display
*       FORM sub_alv_top_of_page
*       Call ALV top of page
*       No parameter
FORM sub_alv_top_of_page.                                   "#EC CALLED
* To write header for the ALV
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = i_alv_top_of_page.
ENDFORM.                    "alv_top_of_page
*&      Form subtotal_text
*       Build subtotal text
*       P_total Total
*       p_subtot_text Subtotal text info
FORM subtotal_text CHANGING
               p_total TYPE any
               p_subtot_text TYPE slis_subtot_text.
* Material level sub total
IF p_subtot_text-criteria = 'MATNR'.
    p_subtot_text-display_text_for_subtotal
    = 'Material level total'(009).
ENDIF.
* Plant level sub total
IF p_subtot_text-criteria = 'WERKS'.
    p_subtot_text-display_text_for_subtotal = 'Plant level total'(010).
ENDIF.
ENDFORM.                    "subtotal_text
Edited by: Joyjit Ghosh on Aug 21, 2008 5:25 PM

How to display subtotals in every page and the grand total in the last page

Hello Abapers,
I am working with Smartforms. I am not able to print the subtotal in every page ie the Price for that particular page alone should be summed and in the final page I want the grand total also to be displayed. I tried the Total option in the Calculations tab but the value is just getting incremented on every page..How can I achieve this..
With Regards,
Bennet.

Hi,
Declare two different variables for subtotal and total
Use them in the calculation tab of the table node.
After displaying the subtotal create a program lines node to clear the value of the subtotal. And dont forget to mention the condition in the condition tab of the text node of your subtotal as only before end of main window.
display the grand total in the text another text node with condition... only after end of main window.
regards
padma

In the info bar at the bottom of the iphoto window, why is the number of items different from the total

In the info bar at the bottom of the iphoto screen, why is the number of items different from the total?

What version of iPhoto and system are you running? What mode are you in, i.e. Events, Photos?
If it's the Photos mode the number at the bottom will represent the number of photos displayed in that mode or the number of photos selected in that mode. The number will match the number next to the photos mode only when there are no photos in that mode that are selected.
If you click on the Events icon and then back on the photos icon the numbers should match.
OT

Get Grand total of the subtotals

Hi,
I am devoloping a report which pulls the expense lines for each project.I am displaying the fte count at each line.As it'll be same for a particular project,all the lines for that particular project will show the same FTE count.I am grouping the
lines by Project No in Desktop edition.Now I want the total fte count which is the sum of the fte counts at each grouped level.So I cant use the total as it'll give the grand total of all the line entries.But I am not finding any option for this kind of total.(Total of the subtotals)
Pls give me a solution ASAP

Hi,
I am devoloping a report which pulls the expense lines for each project.I am displaying the fte count at each line.As it'll be same for a particular project,all the lines for that particular project will show the same FTE count.I am grouping the
lines by Project No in Desktop edition.Now I want the total fte count which is the sum of the fte counts at each grouped level.So I cant use the total as it'll give the grand total of all the line entries.But I am not finding any option for this kind of total.(Total of the subtotals)
Pls give me a solution ASAP

Calculated members In Excel 2013 - subtotals and grand totals missing

I am using Excel 2013 to query an SSAS OLAP cube. I have selected 2 dimensions in the row area, and I need to consolidate specific combinations of members values of each dimension. To do this I have created calculated members which combine sets of members
of each dimension, as in the code example below.
These members produce the desired results except that I do not have any subtotals on a 3rd dimension in the row area (Internal segment name, cf. image below), nor grand totals in the pivot table.
I am fairly new that MDX and would appreciate any advice on how to correct the code below.
Code for the member [Manufacturing Item].[Item Type].[All].[Cards Contact]
AGGREGATE(
CROSSJOIN(
{[Manufacturing Item].[Item Type].&[CARD BODY OTHER],
[Manufacturing Item].[Item Type].&[CARD BODY],
[Manufacturing Item].[Item Type].&[SMART CARD]},
[Techno cards contact]

In my previous post, the solution happened to work because the combination of the calculated members was equal to the whole dimension. But I found a cleaner method: subtotals need to be calculated for the combination of all the calculated members, so the
logic is to create a set that contains all of them. Then aggregate the measure for this set only for subtotals. To do this, I have created the following calculated measure:
IIF(
ISLEAF([Manufacturing Item].[Item Type].CurrentMember),
[Measures].[Manufacturing Volume],
SUM({[CalcMembers]},[Measures].[Manufacturing Volume])

Grand total feeding from Multiple Subjects Area

Hi,
I have to create a report that displays Grand total = sum of values from one subject area + sum of values from another subject area. How do i achieve this.
Thanks

Create a prompt based on the report(incl criteria) from SA1, include the measure column in the prompt, the value of the measure is based on the 'contrain' of each column in the prompt and assign to Presentation variable.
Call Presentation variable in the report which is from SA2.
ex: Report 1 from SA1 is like: $amount by year, by prodcut,by org
Report 2 from SA2 is like: $OrderAmount by year, by prodcutType,by org
Report1 by Prompt: Year->constrain, PRoduct->Constrain, Org-Constrain, $Amount as PS Var 'amt'
Report 2 as reqular report, try to call @{amt} in the report for addition.

Grand Total formula different from Subtotals

Similar Messages

Maybe you are looking for