Grand Total value displaying in all rows

Hi All,
I am facing issue with report data in one of my environment (OBIEE 11.1.1.6.2) ,
Let's say I have env1 and env1 with report A (Union Report)
In env1 the report is working fine.
Col1--------- Msr1---------Msr2
A---------------1-------------2
B---------------2-------------4
Subtotal-----3-------------6
D--------------10------------1
E--------------10------------2
Subtotal ----20-----------3
Grand Total-23-----------9
the same report in env2,
Col1--------- Msr1---------Msr2
A----------------23------------9
B----------------23------------9
Subtotal------23------------9
D---------------23------------9
E---------------23------------9
Subtotal -----23-----------9
Grand Total--23-----------9
The grand total value is repeated instead of row value in env2.
I tried moving the reports around the environments but no use, I believe some enviornment level setting is the reason for this issue. (I have few more environments everywhere it is working fine like env1, the only problem is with env2).
Could anyone give some suggestions.
Thanks,
Vino

It is happening because of RPD corruption.
Copied physical, bmm and presentation layer from env2 to env1 then same issue started occuring in env1.
the following things worked,
1) Created a new bmm and SA in env1 from env2 physical model, this worked fine.
2) Copy the BMM from env2 to env1 - Let say BMM1
Now recopied the BMM1 in the logical layer of env1 and rename it as BMM2 this also worked fine.
Looks like the BMM layer was corrupted, don't know the reason why it happened..
Thanks,
Vino

Similar Messages

How to show Grand total values in Chart view....

Hi,
I have a crazy req. like i need to show grand totals values also on the chart view along with the normal metrics.
column Metric1 Metric2
AAA 10 20
BBB 30 15
CCC 20 15
TOTAL 60 50
so here i need the values 60 and 50 also also to be displayed in a line graph
cheers

Pretty simple to achieve :)
In your Pivot view, under Rows section where you have column dimensions like AAA,BBB etc...create a new calculated item say Grand Total with function as 'formula' and formula as sum(*). This will give you a new row with totals. Now Chart Pivoted Results and you are done.
Hope answered

Grand Total not displaying correctly on Column level security.

Hi All,
I have implemented the Column level security for three columns. But in dashboard report. The grand total is not displaying correctly. The grand total values are still displayed for the hidden columns.
Is there any work around for this.
The sample how my report looks like after column level security is.
ColumnA Metric1 Metric2 Metrics3(to be hidden)
A 100 200
B 150 100
GrandTotal 250 300 400( this includes the value of A = 300, B = 100).
Regards,
Bhavik

Any pointers please.

How to hide % measure column Grand Total value in Pivot View in obiee 11g?

Hi ,
I am facing a issue in obiee 11g .I am using a Pivot table to display the grand total of 3 metric columns eg: A , B, C out of which B is percentage so I need to remove the grand total value of the percentage column. We have to stick to Pivot View only. Anyone can sugest me on this?
Thanks ,
Shruti

Move B to rows section or cast to char in Criteria tab by keeping the B in Measures section only.
cast(B as char)

Grand total values are not matching with Detail report

Report has grand totals and when I drill to the detail report, grand total values are NOT matching with parent report totals, I did some analysis but I'm clueless on this issue.
Please provide your thoughts and insight on this issue..
Thanks

is your summary and detail reports hitting different facts, like summary hitting aggregate and detail report hitting it's corresponding detail level fact..?
if then,
From Front-end:
Fix the filter values in detail report that are passing from master report then try delete each columns then check the grand total. If you found your values is matching by deleting particular column then you need to investigate what is the issue around with that dimension table..
From Database side:
1. check first aggregate table has proper aggregate data of it's detail..
2. Take the detail report obiee generated query and try to comment each dimension table and it's corresponding joins to the facts, (before, this delete all the dimensional columns and other measures from select statement and put only that measure where you are getting wrong value, so that you need not to comment all the select and group by columns which saves your time.. ). Need to check by commenting each dimensional wid and it's table from clause, if you found that values is matching then there is some problem with wid columns data population in your ETL.
Is that BI-Apps project?
btw, whtz ur name?

*urgent* Alternate colors for Grand total values

Hi all,
I have 1 dimension column and 4 fact columns. Here I perform Grand total for the request .
The requirement is :---
I need alternate colors as background for the Grand total values.
Am trying to modify the XML in Advanced tab .
I tried to do it by using combine request .
Please help on this . Urgent .
Thanks a lot in advance for every reply .

Please give some suggestions.

Alternating colors for grand total values

hii
i hve a requirement that grandtotal values should be displayed in alternate colors..actualy grand total values be in blue..bt i need the alternate colors for the values of grand total..pls help me regarding this..

Please give some suggestions.

Presentation Hierarchy Grand Total Values

Hi,
We have the following scenario,
Hierarchy Product A is created for Dimension Product A
Hierarchy Product B is created for Dimention Product B
Fact Product Measures is joined to Store Dimension , Dimension Product A, Dimention Product B and Fiscal Calendar
Dimension Product A contains subset of Products that are existing at Fact
Dimention Product B contains subset of Products that are existing at Fact
and some products can exists both at Dimension Product A and Dimension Product B
The issue we are facing is, when ever report is created using One of the Product Hierarchy and Fact. Product Sales (default aggregation is sum),
the grand total level is showing sum of all Product Sales. It is not limiting to Products that are in Product Hierarchy selected in the report.
But the sub levels are limiting based on selected Product Hierarchy which is causing not matching the roll up amount to grand total.
Is it possible to limit the grand total level value of Presentation Hierarchy based on selected Product Hierarchy.
Does anyone face similar issue.
Thanks in Advance

is your summary and detail reports hitting different facts, like summary hitting aggregate and detail report hitting it's corresponding detail level fact..?
if then,
From Front-end:
Fix the filter values in detail report that are passing from master report then try delete each columns then check the grand total. If you found your values is matching by deleting particular column then you need to investigate what is the issue around with that dimension table..
From Database side:
1. check first aggregate table has proper aggregate data of it's detail..
2. Take the detail report obiee generated query and try to comment each dimension table and it's corresponding joins to the facts, (before, this delete all the dimensional columns and other measures from select statement and put only that measure where you are getting wrong value, so that you need not to comment all the select and group by columns which saves your time.. ). Need to check by commenting each dimensional wid and it's table from clause, if you found that values is matching then there is some problem with wid columns data population in your ETL.
Is that BI-Apps project?
btw, whtz ur name?

Hiding grand total value in pivot table view

Hi,
I have a pivot table in which i have 5 measures, out of these 5 measures i want to show the grand total for only the first one. How can this be done?
Thx

hi Phantasm, do as it is mentioned as kart.
IT WORKS FINE, put agrregation rule as none and take row total as after.........
take aggregation rule as NONE for last 4 columns ok......
TRY NEATLY ONCE..........IT WORKS
Thanks & Regards
J Rushi

Wrong SSAS Grand Total Value Monthly Value base on Weekly Value

Dear All,
I Have calculated measures in my cube base on Weekly and Base on Monthly and different
Template Base .
For grand Total Weekly is fine but for Monthly is bad one.
Say calculated Measure Name "Weekly" with Syntax
CREATE MEMBER CURRENTCUBE.[Measures].[Weekly]
AS IIF(isempty([Measures].[Actual Quantity MTD]) or [Measures].[Actual Quantity MTD]=0 or isempty([Measures].[Original Plan Quantity MTD]) , null ,
IIF([Measures].[Original Plan Quantity MTD] =0 or isempty([Measures].[Original Plan Quantity MTD]),null,
IIF(
([Measures].[Actual Quantity MTD]-[Measures].[Original Plan Quantity MTD]) > 0 , 1 ,[Measures].[Actual Quantity MTD]/ [Measures].[Original Plan Quantity MTD] )))
The Result is good
here the picture
http://hpics.li/9fd22f2
https://drive.google.com/open?id=0ByY5H-XcydgiWGp0RzdWYWp0M2c&authuser=0
and for Monthly Calculation it was AVG of Weekly base on Time, Plant, and PSL Dimension
My calculated Monthly Measure Name "Monthly" with Syntax
CREATE MEMBER CURRENTCUBE.[Measures].[Monthly]
AS AVG (
DESCENDANTS([PSL].[PSL Description])*
DESCENDANTS([Plant].[Plant])*
DESCENDANTS([Finish Date].[Calendar],[Finish Date].[Calendar].[Month Year])
, AVG(([Finish Date].[Calendar].CURRENTMEMBER.CHILDREN), [Measures].[Weekly]))
The Result is Bad on Grand total
here the Picture link
http://hpics.li/5233b50
https://drive.google.com/open?id=0ByY5H-XcydgicEhtT1FpekRsbW8&authuser=0
Please help me why for the Result doesn't same. What do i Miss
Thank You
Yan

Hi Yan,
According to your description, you create a calculated measure in your cube, the problem is that grand Total for Monthly is incorrect, right?
In your scenario, the issue can be caused by that you used "*" and "/" in your calculated measure. In SSAS, one of the most common issues faced in mdx is grand total or sub total not coming properly when some arithmetic operations like
measure1 [* or + or - or /] measure2 is used, please refer to the link below to see the details.
http://vnu10.blogspot.jp/2011/01/mdx-grand-total-sub-total.html
Regards,

GRAND TOTAL SOULD BE DISPLAYED ON THE LOST PAGE OF THE SMART FORM

Hi friend,
i calculated the grand total value in my smart form, i want to display it in a smartforms lost page only can any one help me pls.
In my footer i gave the grand total in a separate line type and condition i gave only before end of main window check box activated but in every pages i got the grand total value.
kindly any one help me to accuire the exact value.
Thanks .
M.S.Amirtharaj Vijay.

HI Vijay,
What Sowmya said is correct
check the table SFSY
and PAGENO holds current page no
FORMPAGES holds all page numbers
Check the condition like
SFYS-FORMPAGES > SFSY-PAGENO
or
SFYS-PAGENO > SFSY-FORMPAGES
any of above condition will work
Thanks
Surendra

Column Level Security - Grand Total row

Hello All, I have a question about Column Level Security in a report where Grand Total is turned on. I am working inside of the OOTB Paint rpd and I am looking at the 'Finish Sales Trend for Current Year' report on the Brand Analysis dashboard page. Inside of the Admin Tool I added column level security on the Units presentation column in the Sales Measures table. I implemented security that will not allow the Central Region Manager group to view the Units column. When I access the report I noticed that the Grand Total row of the table is slightly skewed because the Units column is hidden. The Grand Total row is showing, however all the results are off by 1 cell.
The forum is not allowing me to attach pictures to this post.
Thanks for your help

Hi User,
It is an bug refer the metalink,
Bug.9576412 - GRAND TOTAL NOT WORKING WHEN COLUMN LEVEL SECURITY IS IMPLEMENTED
For eg:
consieder a report with following columns,
Year Product Measure1 Measure2
In this if for measure1 the column level security is enabled (user1 who is not supposed to see the data).
Then grand total value of measure2 will be in the grand total of measure1. (for user1)
When column level security is enabled, that column will be pushed to the end of the table view.
So that it is happening.
By using case statements with groups or users we can get it work without enabling the column level security.
Thanks,
Vino

How to display grand total only on the last page of my report

Hello
I need to display the grand total amount of the invoice only on the last page of every report. If the report has 1 page then the grand total will be displayed on the 1st page. If the report has 2 pages then a subtotal will be displayed on the 1st page adding up all the amounts on page 1 only, and the grand total will be displayed on the 2nd page, adding up all the amounts of page 1 and 2. If the report has 3 pages then the a subtotal will be displayed on page 1 adding up all the amounts of page 1, and another subtotal on page 2 adding up all the amounts of page 2, and the grand total are displayed on page 3 adding up the amounts of every page.
supplier amount
xx 100
yy 100
subtotal 200
page 1 of 2 --here i need to display only the total amounts of page 1
supplier amount
subtotal brought forward 200 --then i need to bring total of page 1 over to page 2
qq 300
zz 300
total 800 --here i have reached the end of the report and
need to display the grand total
page 2 of 2
--Currently i am displaying this on my report
supplier amount
xx 100
yy 100
total 800 --this one gives the problem cause it displays the grand total
---------- on page 1 of 2 even before you can see the amounts on the
next pages
page 1 of 2
supplier amount
qq 300
zz 300
total 800

put the grand total in a frame and set it to print on the last page of the enclosing object.

Grand Total & Headings as separate row

Is it possible to put the grand total BEFORE in a table view?
Can I display Table & Column Headings as separate rows in a pivot table?
I initially wanted to use a table view because I also need the Table & Column Heading to be displayed as separate row on top...(column properties in Table View: Display Column & Table Headings= As separate rows)...
but I also need the Grand Total to be on top (Before) but the only option in Table View is None & After.
I've seen that the Grand Total BEFORE is available in Pivot table view, but in Pivot I can't display column & table headings as separate rows.
Any idea how to have that 2? (Grand Total Before & Display Column & Table Headings as separate rows)
Thanks,
Janne

Hiey Kishore,
Here is the problem which I have. I have the table with 6 columns first 4 columns have details and last 2 columns have measures. I can apply color to Label and Measure. but the problem is that the whole line color does not change it just changes color of the column which has the label and the color of the Measures.. inbetween 3 column gets the default light blue color. Is there is a way to change that?
Thanks

Formulated Grand total as percentage value

Hi,
Here is my sample data
Val1 Val2 Percentage( Val2/Val1 )
59 16 27%
19 4 21%
78 20 26% (now instead of getting 26% i'm getting 48%). How to get formulated grand total value based on previous two columns ?
Thanks

Try this: on your Percentage column, change the aggregation rule to "server complex aggregate."

Grand Total value displaying in all rows

Similar Messages

Maybe you are looking for