GrandStream UCM6100 can be integrated with lync 2010

Can we Integrate Grandstream PABX UCM100 Series with MS lync 2010 if yes then wht is the procedure.

Grandstream PABX UCM100 Series Is not on the Ucoip site as tested and certifed gateways for
Lync
So support is very limited for any issue you might have approach the PBX vendor
From the product specs for UCM6100 series IPPBX appliance
It Supports TCP/UDP/IP, RTP/RTCP, ICMP, ARP, DNS, DDNS, DHCP, NTP, TFTP, SSH, HTTP/HTTPS, PPPoE,
SIP (RFC3261), STUN, SRTP, TLS, LAD
http://www.grandstream.com/products/ucm_series/ucm61xx/marketing/ucm61xx_brochure_english.pdf
Since its support SIP the best apporach would be to use Direct SIP method
you can refer to the Cisco Lync 2010 doc to get ideas how to configured it
http://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/interoperability-portal/1071259.pdf
Again support is very limited for any issue you might have approach the PBX vendor
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

Similar Messages

Best way to go for Cisco UC with Lync 2010 Integration

I have requirements to integrate Cisco UC 9.1 (single cluster) with Lync 2010. The decision is to use Lync for IM/presence and use Cisco phone for VOICE features.
Now I have two options which are Microsoft RCC and CUCI-Lync in my mind.My questions are:
Are CUCI-Lync and MS. RCC conflicting features? If not, can we enable both of these features and what could be the strong points to do this way?
Cisco Application dial rule and directory lookup features will allow Lync client to see the calling name displayed when making calls to the other Lync users. However, the inter site calls are sent through PSTN which does not accept the calling name IE in ISDN so the called party will NOT see the calling name displayed on the Cisco IP phone. In this scenario, would the Lync client still be able to see the name displayed on this call?
Can we have presence status updated to Lync clients when Cisco handset if offhook/ busy?
Appreciate for any feedbacks on the above. Thanks

Hi
Firstly, Lync + Cisco often isn't the best solution - yes, Lync is good, and yes, Cisco voice is good. That doesn't mean that by having two systems you are getting the best solution.
CUCI-Lync works when implemented properly but it's not perfect.
Anyway.... I'm sure you'll properly pilot the solution!
1. Yes, they conflict. CUCI-Lync performs more advanced call control than RCC and there's no real reason to implement RCC with it. The only case I can think of for that is maybe for Macs, as there is no CUCI-Lync for MAC. As I recall there's nothing to stop both being configured....
2. As long as each endpoint has it's own DDI presented when dialing over the PSTN, the reverse lookup rules should still allow a correct lookup against AD (so if each AD account has both the 'internal' extension number and the DDI in attributes that CUCI-Lync uses for reverse lookup then it should display the name).
3. Yes - you need to carry out the steps in the documentation that describe setting up 'custom presence states' for this to work though. People miss that a lot...
Regards
Aaron

RoboHelp 9/Acrobat X Pro Integration with Outlook 2010

Is anyone aware of any issues with RoboHelp 9 and/or Acrobat X Pro integrating with Outlook 2010? When I create a PDF for review using RoboHelp and then try to send it for shared review, I keep getting an error message when I try to add people to the To and CC lists in the Send for Shared Review dialog. Clicking either button brings up my Address Book from Outlook, and I can select people without any problems, but whenever I click OK, I get a Check Names dialog book that says:
Microsoft Outlook does not recognize"/O=Company Name", Select the address to use:
(No Suggestions)
At this point, all I can do is go back to the Address Book and try to add people again, but this leads to the same error.

In Outlook, go to File/Options/Add-Ins, and select Manage Com Add-ins, and click Go...
Then make sure the PDFMaker Office COM Addin is checked, select OK, restart, and it should be available.

Issue with connection SSRS reportviewer control to SSRS 2012 integrated with SharePoint 2010...

Hi,
I have a .NET application that uses SSRS ReportViewer 2012 control to render reports deployed on SSRS 2012 integrated with SharePoint 2010. I am getting error "the report execution '' has expired or not found". The same code works when I connect
to SSRS 2008 R2 integrated with SharePoint 2007. I investigated the issue and it seems the JavaScript that pings the SSRS server before it expires is missing from rendered HTML.
Let me know if there is a way to fix this issue.
following is the code:
ASPX:
<formid="form1"runat="server">
<rsweb:ReportViewerAsyncRendering="true"
KeepSessionAlive="true"ID="test"runat="server"></rsweb:ReportViewer>
<asp:scriptmanagerrunat="server"></asp:scriptmanager>
</form>
Code Behind:
if(!IsPostBack)
this.Session.Clear();
        test.Reset();
        test.ProcessingMode =
ProcessingMode.Remote;
        test.KeepSessionAlive =
true;
        test.ServerReport.ReportServerUrl =
newSystem.Uri("https://webappname/_vti_bin/reportserver/");
        test.ServerReport.ReportPath =
https://webappname/RS_Reports/REportEngineTest.rdl;
ReportServerCredentialscred =
newReportServerCredentials();
            test.ServerReport.ReportServerCredentials = cred;
report server credentials:
publicICredentialsNetworkCredentials
get
// Use default identity.
returnnewNetworkCredential("user",
"pwd",
"domain");

What's the meaning of webappname, are you mean the sharepoint site?
I think this issue can be caused by the incorrect url. You can refer to the following link:
http://msdn.microsoft.com/en-us/library/ms154497(v=sql.110).aspx
Familyabc

Can Peoplesoft HCM 9.2 can be integrated with Oracle HR Analytics?

Hi All,
Please help me understand if Peoplesoft HCM 9.2 can be integrated with Oracle HR Analytics? If so what is the latest Version for that.
What is the road map for that.
Thanks in Advance
J Smith

Normally, Oracle will lag behind in certifying the latest PSoft releases...however, we are using OBIA 7964 with PSoft FSCM 9.2 using the 9.1 SDE adaptors. It seems to work fine. In general, its best to ensure the version is certified but you can ask Oracle support if the 9.1 adaptor can be used for 9.2 HCM. If there are not significant structural changes for the tables in PSoft, it may work. As for the dates for certification, Oracle would have to assist with that. We have asked about FSCM 9.2 4 months ago and it is still not certfied.
Pls mark correct...

Lync 2013 Mobility in coexistense with Lync 2010

Hi
I am facing Issue when connecting my internal mobile client with Lync Server 2013. The Mobile Client doesn't sign in to Lync Server 2013.
Currently we are in co-existence phase with Lync 2010.
There was no mobility service configured or installed in Lync 2010 environment before when we deployed Lync Server 2013 Enterprise pool with only one front end server.
The SRV record _sipinternalts is currently pointing to Lync server 2010 pool and the lyncdiscoverinternal.domain.com is point to the IP of Lync Front End Server.
Is it necessary to configure and deploy mobility service on Lync 2010 front end server in order to allow Lync Server 2013 users to connect using mobile client??

Hi Abdullah Salam,
For WP8 root certificates need to have HTTP URLs in the CRL (Certificate Revocation List). If root certs doesn’t contain these CRL attributes than the certificate won’t be accepted by WP8
and sign-in would fail.
Same cases for your reference.
https://social.technet.microsoft.com/Forums/en-US/cd6c1558-02e4-4ad8-86af-c6aee82a4ff0/passive-authentication-redirection-fails-for-wp81?forum=lyncint
https://social.technet.microsoft.com/Forums/en-US/70932e7d-4df5-4f48-8f33-b0e19e2a02f9/unable-to-sign-with-windows-phone-lumia-925-windows-81-to-lync-2013?forum=lyncprofile
Best regards,
Eric<o:p></o:p>

Project Pro 2013 client Deployment with Lync 2010 and Team Explorer Excel Issues Following

Current machines are Office 2010 SP1 or SP2 32-bit
Just deployed Project 2013 Pro and Std to the existing machines that had Project 2010 Pro or Std. We selected the full install since people use integration into different tools.
Results:
lync 2010 64-bit when attending a meeting prompted user to start using and download the Lync Web Component, which breaks features such as muting, etc.
A repair sent to the workstations for Lync 2010 64-bit fixed that.
Team Explorer 2012 Export to excel from queries gives error Unable to cast COM object of type 'Microsoft.Office.Interop.Excel.ApplicationClass' to interface type 'Microsoft.Office.Interop.Excel._Application'. This operation failed because
the QueryInterface call on the COM component for the interface with IID '{000208D5-0000-0000-C000-000000000046}' failed due to the following error: The interface is unknown. (Exception from HRESULT: 0x800706B5).
Repair of Team Explorer, Office, Test Manager 2012, etc did not assist. if we go into excel and connect to TFS, we can then retrieve the query data. Just not from TFS exporting to excel. Had to unload Project 2013, repair Office 2010
and rebooted with project off the machine and now it works. It seems maybe the setup with the shared features and Office tools are breaking something? We need the ability for VBA and .net functionality, but what could be breaking this?

Hi,
Your environment will support 32 bit of Project professional 2013 (x86) as you have Windows and Office of (X86).
You try to modify registry then you wont face issue.
The issue when you hit a "1653" is that Windows
Installer "DisableRollback" is set. Office 2013 requires that "rollback" be enabled. If you are getting a "1653"
error in your logs as Ken did then the solution is to delete the "DisableRollback" (or set to '0') at the following registry keys:
HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\Installer
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer
these are the issues I've seen:
Scheduler service was stopped. At a cmd window typing "net start schedule" resolves the problem.
CMD.exe was customized via the following registry key. Solution was to temporarily disable the customization by changing autorun value to autorun_old.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Command Processor
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Command Processor
Permission issues - seems some custom permissions affected Ingram's install which he explained in his previous post.
Environment variable "ComSpec" had been modified (semicolon added). Fix was to remove the added semicolon (there should be no semicolon).
The way to identify you are hitting this specific issue is if in the %temp%\OfficeSetup.log there is a mention of "Office64MUI.msi" failing to install with return value of 1603
If you want to enable verbose logging via the following key, rerun your failed install, and collect all the setup and MSI* logs that will give more information.
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Installer]
"logging"= "voicewarmup"
kirtesh

Sharepoint online presence with Lync 2010 On Prem

We have recently moved to Office 365 in an exchange hybrid deployment. We have Lync 2010 on-prem, and are not using
lync online. We are experiencing issues with IM presence in sharepoint online and one drive, but have presence indicator within outlook online. We do not see the options to sign into im at all, and the presence indicator is grey. I verified
that the SIP:username@domainname was added to the PROXY attribute in AD.
Any idea where we should start?

Hi,
Did you integration Lync Server with SharePoint successfully?
Please check if ActiveX control work normally. To display the presence indicator and its associated contact card (in Office 2010), SharePoint uses the Microsoft ActiveX control
name.dll. The ActiveX control makes calls directly to the Microsoft Lync 2010 API, and then Lync makes MAPI or Exchange calls to supply the requested information.
You can refer to the following link:
http://blogs.msdn.com/b/modonovan/archive/2005/05/11/416376.aspx
Please also update Lync Server and SharePoint Server to the latest version and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

EP7.31 integration with Sharepoint 2010

Hi ,
we are integrating EP 7.31 with Sharepoint 2010 server, we can able to see in HTTP header in MYSSO2 ticket cookie,but Sharepoint application can't able to parse the ticket,
Here is the Log :
[Thr 10788]     Initializing SSF Library Version
[Thr 10788]     SAPCRYPTOLIB 5.5.5C pl36 (Jul 3 2013) MT,[aesni],NB
[Thr 10788] Leave function MySapInitialize with rc = 0.
[Thr 10788] Thu Feb 27 07:39:05 2014
[Thr 10788] Ticket is 橁硅䑍杁䅁眹㍢お坙㙷㍚畖䡤牖塙䥏䉁楎塙灎㉙ㅆ䝤汨湢灒㉙う坡甹...
[Thr 10788] DecodeB64Len returns 0. iDecLength=251
[Thr 10788] *** ERROR => Ticket has probably not yet been parsed. [ssoxxext.c   2494]
Thanks,
Balaji

Hi,
No, Project Server 2013 requires SharePoint 2013.
See reference below:
https://technet.microsoft.com/en-us/library/ee683978.aspx
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Yammer Integration with SharePoint 2010

Hello Team
We integrated Yammer with SharePoint 2010 and everything were working properly, since we updated embeded code with latest yammer its not working properly-
http://success.yammer.com/integrations/yammer-embed/
Following issues are occured-
• In the new yammer feed, I couldn’t find a way to add an attachment or photo to the post. This is a vital component to the functionality of the feed
• In the previous version the feed also had tabbed areas to show different Yammer Areas: ‘My Feed’, ‘Private Messages’, ‘Notifications’, and ‘More >’. Is there any way to keep this functionality.
We also wanted to integrate SSO with our FBA SharePoint 2010 site. But could not found any good article so far. Is there any option by which we can do SSO and all above functionlaity.
Thanks Ranveer Katiyar

Hi,
According to your description, my understanding is that when you add the Yammer feeds app to SharePoint page, it occurs "The
page or app using unsupported version of yammer platform" error.
This maybe related to the Yammer API version has been updated, the solution is to update the Yammer app in site contents.
Here is a similiar thread for your reference:
Yammer App for SharePoint – unsupported version
Here is a detailed useful article for your reference:
"This page or app is using an unsupported version of the Yammer platform" error message when you use the Yammer App for SharePoint
If the issue still exists, I suggest you can check the ULS log error message for more detailed information. By default, the ULS log for SharePoint 2010 is located at the path:
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Galaxy note 10.1 doesn't compatible with Lync 2010

I have a Galaxy note 10.1 gt n8010. In play play store is hard find the lync 2010, when I found it there is a warning that my divice isn't compatible with that versionof Lync (2010).
Thanks to my company I have a user for Lync but in my Galaxy I can not used it.
I have a sony smartphone with android system and could install lync2010 without problem.
Can you fix the problem that exist with the galaxy note10.1 n8010?
Thanks

I already have lync 2010 on galaxy note 10.1 N8000. The compatibility depend on version of Android.
Also try to install lync 2010 from App store.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

SCOM 2012 R2 Integration with Lync Server 2013

Hi,
I am trying to configure SCOM 2012 R2 to work with Lync server 2013 standard edition. I have successfully installed and tested Lync Server 2013. But the problem is, I never worked on SCOM application before and I can not find any easy documents online. So
could you please help me and suggest any step by step guide for the same purpose!
BR,
Ajit

Hi,
Glad to hear that you have solved the issue. For the second question, what did you want to do with the Windows Server (anything to do with Lync Server)? As it is another question, you can also post another case on Technet forum and more engineers will help
you solve the issue.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Lync Phone Edition coexistance with lync 2010 and 2013

Hi Everyone
I am currently planning a coexistent network between Lync 2010 and 2013 as I need to get 2013 out urgently. My question is around the Lync phone edition and how to get the phone to find the front end to register the phone to depending on which lync
pool the user is configured to use. Right now all phones are configured with DHCP and are configured to use the 2010 front end server to get its cert provisioned. I also use the HP 4110 and 4120 phones in the office.
How should I configure DHCP so that I do not cut my user off if they are moved the 2013 pool?
Many Thanks
Joe
Joe

Hi,
Check this old Thread
https://social.technet.microsoft.com/Forums/office/en-US/fca0b7be-124e-4480-ba2f-19ca4eebbd53/phone-edition-aries-polycom-cx600-coexistence-lync-2010-and-2013?forum=lyncvoice
http://unifiedme.co.uk/2013/09/lync-2010-2013-migration-lync-phone-edition-devices/
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

Windows XP SP3 and Outlook 2010 can't connect with Exchange 2010 or Exchange 2013

XP+SP3+Outlook 2010 can't connect to Exchange 2010&2013 in the internal network without safe mode.

Hi,
Did you get any error messages?
Do you have Outlook Anywhere and autodiscovery set up properly?
Can you ping the Exchange server?
Please use Test Email AutoConfiguration
to test if the Autodiscover service is configured properly. See:
https://hosting.intermedia.net/support/kb/default.asp?id=2150
We can also use the remote connectivity analyzer to troubleshoot the issue:
https://testconnectivity.microsoft.com/
In addition, turn off your firewall and anti-virus to check the result.
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support

Limitations of SharePoint 2013 integration with Exchange 2010?

Customer using SharePoint 2013 and looking at whether its possible to integrate this with Exchange 2010 and which features would be available / limitations. Looking for a matrix similar to those found in the Good, Better, Best documents available for previous
versions. Nothing available on Recently Published content for SharePoint 2013 yet http://technet.microsoft.com/en-us/library/cc262043.aspx

I haven't seen a specific list, but the three features I've run into that only work with Exchange 2013 are eDiscovery in Exchange, Automatic Task Synchronization with Outlook and the Site Mailbox feature. There is a Legacy Task Synchronization mode
available that will work with Exchange 2010 if you turn off the Farm level feature controlling Exchange 2013 task synchronization. It lets users manually sync specific task lists with Outlook. But there is no task aggregation. I found this
whitepaper helpful for exploring the new features and how to turn them off when using Exchange 2010.
http://www.microsoft.com/en-us/download/details.aspx?id=38799
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

GrandStream UCM6100 can be integrated with lync 2010

Similar Messages

Maybe you are looking for