Graph alignment in Report 10g

Hi!
I'm working with Reports Builder 10g and I have a problem with alignment of a graph.
This graph (G1) is contained in a repeating frame (R1) and the repeating frame is in a simple frame (M1).
In the XML I set 'autoLayout' to 'AL_NEVER' and I resize the graph moving the borders in the layout editor to align it to the left border of the page.
However, when I run report, the graph isn't aligned to the left margin, and it appears in the centre of R1 and it don't fit R1 exacltly: there are some space between the margins of R1 and the graph G1.
Can, you help me!
Please, I'm very hungry because I spend too much time to resolve the problem but I didn't find a solution.
Thanks in advance.
Bye.

Hi Leonardo,
The attribute autoLayout=AL_NEVER does not have any effect on the size of the graph object. The graph object consists of different areas, eg, plot area, legend area, background, etc. By setting autoLayout=AL_NEVER, you can specify the exact placement of legend area, plot area, etc inside the graph object. But the size of the graph object remains un-affected. You can change the size of the graph object only by dragging its boundaries in the paper layout.
I tried with Reports Builder 10g, and could not reproduce your problem. Remember that there will always be whitespace between the plot area (the area where you see bars, lines etc) and the graph object boundary. I hope that you are not referring to this whitespace as gap.
In order to see the graph object boundaries completely, you can add the following to your graph XML
<Background fillColor="0000CC" />
Navneet.

Similar Messages

Migrating Graphs from Reports 6i to Reports 10g

While migrating Graphs from Reports 6i to Reports 10g is there a possibility of maintaining the same graphs rather than recompiling them using the Graph Wizard of Reports 10g. I have hundreds of reports with graphs and will be an uphill task to re-draft all the graphs. Kindly suggest alternatives to overcome this dead-lock.
Thanx in advance
Sridhar

Hello Sridhar,
10g is not supporting Graphics builder. So you got to create/insert all these 6i graphs in 10g. Open the 6i report and compile in 10g. It will give you file not found error. Delete the graph area in the layout editor.
Then drag the chart icon and drop in layout. Redesign again. Offcourse it is not fun. But there is no way.
Also there are tons of bugs in 10g report Graphs. You won't find some cool features like Others % option in the pie slice provided by Graphics bulider. You got to change graph.xml file for some of the features. Even the graphs looks ugly in 10g. Migrating graph reports is really frustrating in 10g. But we have no choice. Recently we migrated to 10g. Becareful with matrix reports. 10g keeps on getting crashed when ever we develop matrix report. GOD knows the reason.
But 10g has some very very good features like Distribution
Cheers.
Ram.

Report 10g graph problem

i have a problem in graph wizard in reports 10g
when i want do display more than 3 diferent data in plot areao of graph wizard only first 3 rows can be seen and adjusted, others can not.
is there a way to see and adjust more then 3 rows in plot area?
Thanks,
Rade

Hi,
Not directly. You have to edit graph.xml file (in property pane of your graph). Some details about this file you can get from How to... topics on Products page
have a good day
Daniel

Reports 10g: Creating a graph in a repeating frame

I'm preparing a mortality report in which I want, for every diagnosis, a pie chart which displays a breakdown by gender or ethnicity for every diagnosis.
Is someone aware of example code which illustrates how to do this in Reports 10g?
Thanks in advance.
Sean McLinden
Allegheny County Health Department

hello,
you would do this by using the graph wizard in your paper layout (assuming you are creating a paper layout). when doing the INSERT>GRAPH you then click inside the repeating frame you want to insert the graph into and go from there.
tip: you get the best results if you actually make room for the graph in the repeating frame, before you invoke it and then click-and-drag the exact size you want your graph, when you invoke the wizard, otherwise the wizard will try to fit the graph in your frame as good as possibe, with potentially rearranging the itmes already in there.
regards,
ph.

Reports 10g Missing information during file conversion

I have a large report that includes several graphs that keeps giving me an error during conversion that says the report is missing information and cannot create the file. I have never seen this before this report. It is actually giving me the message REP-1067 Some information is missing in the report. It just seems to happen when I add another graph. There is no information on REP-1067 in searching in the forums which does not give me a lot of hope.. Anyone have any ideas where to look. Report Builder 10g, Database 10g.
There are already several graphs in the report, so I don't believe it is a graphing issue.
Edited by: jdev_p8baller on Nov 11, 2011 1:00 PM

Hi,
check this if it is helpful.
TABLES: likp, lips,itcpo.
DATA: pdftab type standard TABLE OF tline,
datab TYPE standard TABLE OF itcoo.
itcpo-tdgetotf = 'X'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
DEVICE = 'PRINTER'
DIALOG = 'X'
FORM = 'Z1989_PRAC'
LANGUAGE = SY-LANGU
OPTIONS = itcpo
// call script using start_form and write_form.
CALL FUNCTION 'END_FORM'
IMPORTING
RESULT = gi_ofc
CALL FUNCTION 'CLOSE_FORM'
TABLES
OTFDATA = datab
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
IMPORTING
BIN_FILESIZE = BINFILE
TABLES
otf = datab
lines = pdftab
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = binfile
filename = 'D:\MYFILE.PDF' //give the address where u want output.
FILETYPE = 'BIN'
tables
data_tab = pdftab
Regards
Rajesh Kumar

R12.1.3 - Reports 10g PDF Output not opening from SRS window

Gurus,
Your help will be highly appreciable for the below context.
While trying to open a report output, following error occurs and won't show the PDF format correctly.
"There was an error processing a page. There was a problem reading this document(135)".
Object Type : Reports 10g with graph
Conc Program Output Type : PDF
Note: Currently issue happening only in DEV instance not in UAT/Prod instance.
Thank You.

Hi,
When you click View Output, press the Control key and see if you get an open/save dialog. If one is displayed, save the document and try opening it directly from the PDF reader.
If this does not resolve the issue, post a screenshot of the error.
Regards,
Bashar

How to add Oracle Graphics 6i charts (OGD) to my Oracle Reports 10g

Hi,
Is there any possibility to add Oracle Graphics 6i Charts (.OGD) to Oracle Reports 10g
(OR)
If not possible, Can you please provide steps to migrate OGD to any format that is supported in Oracle Reports 10g.
Regards,
Swethan

Oracle Graphics and its OGD image format are no longer supported. Reports built with previous versions of Oracle Reports containing Oracle Graphics charts will continue to run in Oracle Reports 10g Release 2 (10.1.2) if the Oracle Graphics 6i runtime is installed on the same machine in a separate ORACLE_HOME. However, this is not a supported configuration, and Oracle will not fix bugs that result from this configuration.
Re-create all Oracle Graphics 6i objects using the Graph Wizard

Running Reports 10g on Apps Server

We have a Windows 2003 apps server running Oracle Forms and Reports 10g.
We are having a problem running reports in Oracle 10g, and believe it to be something to do with the configuration files. Currently, we can run the test report through Enterprise Manager using both the default reports service and the one that we have created. However we are unable to run our own reports through forms.
To check that there was nothing wrong with our forms, we copied one of the reports into the â¦\forms10g\reports\samples\demo folder to see if we could run it through Enterprise Manager. However, we get the following error:
Rep-110: Unable to open file â¦â¦
Rep-1070: Error while opening or saving a document.
Rep-0110: Unable to open file â¦...
We then renamed the test.rdf file and tried to run that. Again we got the above message. Next we tried again to run test.rdf, even though this no longer existed, and the report ran. This implied that it isn't actually running the report, but has the report output stored somewhere, and it just displays this.
No matter how we try to run reports, and with which reports service, we always get the above error.
So why is it that no reports will run, not even the test one when it is renamed? Is there a configuration setting somewhere?

Hi All,
Hope YOu are fine.
We have running Oracle Forms and Reports Services 10g on Windows 2000 Advanced Server.
The Application Works fine, and reports are generated successfully.
But when we access the same application by using either Linux OS (RHEL 4.0, Ubuntu 6),
The forms works fine but Linux OS could not run the report.
This seems to be a configuration problem.
Any Clues.
Thanks and Looking Forward.
Aamer Javaid
[email protected]

Formula Columns are not working in Reports 10g

Hi,
We converted the reports developed in Reports 6i to Reports 10g. When we run the report in Reports 10g Builder everything works fine. But when we deploy the same report in Oracle Application Server and invoking the report the formula columns are not working ie., the fields/ placeholder columns which are based on the formula column are not displaying any values in the report.
Please, someone help us in this regard.
Thanks & Rgds,
M T

What version of Reports do you use..???
Greetings...

Image_Item not working in Reports 10g

we can't use ImageItems in our report.
we had a table with some images in a column with Datatype Longraw. Because we can't use that with Forms/reports 10g, we cahnged the Table-Column to Blob and migrated the Data with Import/Export. Within Forms we don't have any problem, we can display the old migrated pictures, we can import new images with Webutils Client_Image.Read_Image_Item and we can display those new images as well.
But now we have a problem with Reports. Our Report has an item (the new Blob_Column) in the query and that item is displayed within the report. If the Report is run for a record with a migrated Image, it works fine, but with a new Record and a new imported Image_Item, the Report fails (on the Server) with the following information in EM :
Mit Fehler beendet: REP-69: Interner Fehler REP-62203: Interner Fehler beim Lesen des Bildes - Unable to render RenderedOp for this operation..
it is a very small Report but with 2 images (both are small).
Any ideas out there ?
regards,
Mark

Found the solution by myself.
The Problem isn't within Reports it is within Forms. The Image_Item has to set to FileType "BMP" instead of "JFIF".
That solved the problem.

Report 6i and Report 10g together in a system

Hi,
Is it create any problem if I installed both Report 6i and Report 10g in
a system having 10g database.
What are possible problem that will have to face?

Hi,
There won't be any issues. We are using both in our development machines. You must make sure the tnsnames.ora has correct entries.
Regards,
Manu.

Suppressing a warning message in reports 10g

Hi All,
I am getting REP-32751: Warning: Some text segments are missing warning message when ever i open a report and also while run the report in the browser. I am not able to find the missing text segments. Is there any way to suppress this warning message in oracle reports 10g?. Please let me know.
Regards,
Prasad.

probably best to post this in the reports forum

Issue with Oracle Report 10g output

I want to generate text output in Oracle Reports 10g. I am using paper layout.Length of the fields want to print is 750. Each line is broken in the output after 120 characters length apporx. Please let me know if there is any way to print complete 750 characters.

Sample output is coming as below :
T2013 56600084112345                                                                                         FPWC
                                                                       955 OLD WILMINGTON RD                   FAYETTEVILLE
     CUMBERLAND                 NC28301                   00000001CONTACT TESING                          1234567890
                00000001          I'
I want it to be discplayed in single line instead of breaking.

4 PDF reports from Single report in reports 10G

Hi All,
i want to generate 4 PDF report from one oracle report in reports 10G.
from the same query i want to generate 4 PDF with different order and result set based upon the query parameter at a single time.
exp: query fetch Some eng/spanish provider and client data. requirement is i want to spilt into 4 PDF:
Provider wise Eng.
Provider wise spanish.
Client wise english.
Client wise spanish.
Can anybody please help on this?
Regards
Abhishek

Hi All,
i am generating 4 PDF reports from one Oracle reports in 10 G.
i used RUN_REPORT_OBJECT built in 4 times with some different parameter list at a single time.
some time it generates but some time it generate 2 or 3 out of 4.
Can you anyone help me on this issue.
Regards,
Abhishek
Edited by: user651239 on Sep 22, 2008 10:16 PM

XML Publisher is not integrating with Reports 10g Concurrent program

Hello,
I created report in reports 10g. Saved report in the custom_top/reports/US. Created a concurrent program for the report with output as XML. Created a Data Definition with the same short name as the concurrent program and created a template used the same short name as the Data Definition, associated template with the data definition. Uploaded the .rtf file to the template.
The issue i have is when i run the concurrent program the output is xml tags rather than the xml publisher report.
Any help will be appreciated.

| Starting concurrent program execution...
+-----------------------------
Arguments
P_Start_Date='01-JAN-11'
P_end_Date='15-AUG-11'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
Report Builder: Release 10.1.2.3.0 - Production on Wed Aug 24 09:25:14 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE

Graph alignment in Report 10g

Similar Messages

Maybe you are looking for