Graph and image don't update until switch to backpanel

All,
   I have a large and, no doubt, inefficient image acquisition/processing VI running 2 Andor scientific cameras using their sdk package.  Obviously, this is not NI-supported, but I have some weird behavior.  Recently, I have found that several of the front panel indicators do not update unless I switch to the back panel and then back to the front panel.  This is pretty obnoxious... any wisdom?  Thanks.  J

We call it the "block diagram".
Are there other operations that also restore the update (e.g. "minimize...restore").
Did it work correctly in the past? What changed (e.g. video driver update or similar).
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • When I export my job on QuickTime, sound and image don't. respect.

    when I export my job on QuickTime, sound and image don't. respect.

    Don't what? They don't play in the Quicktime? The images don't show up? A little more information and we can might be able to help.

  • N72:Videos and Images lost, when updating "phone r...

    Hi
    I had bought N72 1.5 months back. Recently I bought a mem card (1 GB)and copied some audio and video file. On a holiday recorded some videos and images. But suddenly all my audios and videos went missing.
    Then again I recorde some, after some time the previous recorded things again missing.
    I am residing at a remote place in India where net connection is available but care centre is far from here.
    So when I started updatin my s/w through PC and Net. I got all kinds of errors like:
    Internal Module error (so I tried regsvr32 C:\WINDOWS\system32\msxml4.dll)
    then not done.
    Then continuously I am getting phone recovery remove battery and charger, connect battery and charger and retry. I did this too but in-vain.
    I even hard reset it "*#some code 7580 or so don't remember#" but also not working
    Please help me.
    RRS

    Hello JPTMartins,
    It may help to delete and re-add the exchange account.
    iOS: Microsoft Exchange data not syncing
    http://support.apple.com/kb/TS1693
    Cheers,
    Allen

  • I get an error message that says library not loaded and the reason is image not fund.  I have reloaded IDVD and also done an update but still have the same problem.  Anyone have any ideas on how to fix it?

    I get an error message that says "Dyld error Message:  Library not loaded @rpath/ilifeslideshowcore.framework/versions/a/ilifeslideshowcore"  the reason: image not found
    Anyone have any idea how to fix this problem.  I have reloaded the software from the original disk and have downloaded the latest update and still get the same error.

    Did you delete all receipts with iDVD in the file name  with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/  folder before installing the new copy?  If not then do so and delete the new application also.
    Click to view full size
    Then install iPhoto from the disk it came on originally and apply all necessary updaters: Apple - Support - Downloads
    OT

  • Application Express Install - Login and images don't work

    I followed the instructions (as best I understood them) to install Apex on my database, and then setup an Oracle HTTP server to work with it.
    The problems I have are:
    When i goto the "first" page, which for me is: http://tomcatvs01.traxusers.com:7777/pls/apex/apex_admin
    1. The "Application Express" image at the top doesn't come out, which indicates to me the images weren't setup correctly, despite my best efforts.
    2. I'm not sure what my "username" should be. I remember specifying a desired password when I ran the sql to install the Apex on the database, but I don't remember specifying a username. I assume it is: APEX_PUBLIC_USER
    3. The big problem... whatever Username/password I use, "nothing" happens when I click the "Login" button. With MSIE, it shows the exclamation "error on page." icon on lower left side when I click "Login", which details show this error message:
    Line: 1
    Char: 1
    Error: Object expected
    Code: 0
    URL: My URL given above, but mixed with what appears to be the session ID, which is the same URL that i'm taken to when I goto the page in the first place.
    It doesn't work with FireFox either, and I've tried the client/browser from multiple machines.
    Advice appreciated.
    My setup is to use an Oracle 10g release 02 database.
    I installed Oracle HTTP server from the Companion CD on another machine, which already had an Oracle home/client of it's own.
    I then installed APEX sql on the database (i first ran the webtoolkit sql) .
    On the machine I put the HTTP server on, I copied the apex images to: E:\oracleHTTP\product\10.2.0\db\Apache\Apache\images
    And I configured my dads.conf file (in E:\oracleHTTP\product\10.2.0\db\Apache\modplsql\conf) as such:
    # ============================================================================
    # mod_plsql DAD Configuration File
    # ============================================================================
    # 1. Please refer to dads.README for a description of this file
    # ============================================================================
    # Note: This file should typically be included in your plsql.conf file with
    # the "include" directive.
    # Hint: You can look at some sample DADs in the dads.README file
    # ============================================================================
    Alias /i/ "E:\oracleHTTP\product\10.2.0\db\Apache\Apache\images\"
    AddType text/xml xbl
    AddType text/x-component htc
    <Location /pls/apex>
    Order deny,allow
    PlsqlDocumentPath docs
    AllowOverride None
    PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
    PlsqlDatabaseConnectString proddb01.traxusers.com:1521:trax ServiceNameFormat
    PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
    PlsqlAuthenticationMode Basic
    SetHandler pls_handler
    PlsqlDocumentTablename wwv_flow_file_objects$
    PlsqlDatabaseUsername APEX_PUBLIC_USER
    PlsqlDefaultPage apex
    PlsqlDatabasePassword apex
    Allow from all
    </Location>

    OKay, I kept reading other people's posts and I found the main culprit of my problems. I needed to add a forward-slash to my images directory specification in my dads.conf file. Now my images come out, and my login button "works".
    However, I still can't login because i don't know the username (at least now it tells me the credentials are not correct!)
    What is the username? I remember when running the @apexins SQL, i specified the password. But I don't remember every specifying a username, I even reviewed the instructions and couldn't find where I might have defined that. Please help! Can i extract it from one of the tables that was created? If so, I'd appreciate pointers as to which one exactly.

  • After Mavericks, Keynote, Numbers and Pages don't update to latest version.

    OK, I already had the latest Keynote, Numbers and Pages installed for Snow Leopard.
    I have upgraded to Mavericks and then updated those softwares.
    The thing is that those won't update to the latest versions. When I open any of them it shows the previous (old) version and not Keynote 6, Pages 5 and Numbers 3.
    Any ideas?

    Marcos, the Keynote, Numbers and Pages are not replacing the old version. if you have updated through the AppStore you have the new version and the old version installed in your computer!
    Go to the spotlight search and type the name Keynote, Numbers and Pages and you will see the icon of the new and old app. double click the new icon and voila you have the new version of the iWorks.

  • No more iCloud files in pages and numbers after iOS8 update

    HI,
    after updating to iOS8 on my iPhone 5, Numbers and Pages wasn't able to find any file on iCloud.
    My iPad mini works perfectly. For both, I didn't activate iCloud Drive.
    This his is what I tried :
    - disable and renable iCloud sync for numbers and pages.
    - uninstall and reinstall Numbers and Pages
    - disconnect iCloud, try with an other account, and come back to the main one.
    None one of these tries worked.
    Any ideas ?
    Thx.
    Doudd

    I have the same problem, no iCloud documents on my iPad mini after updating to iOS8.  Calendar, notes and contacts are all there, and the documents are there on my iPhone 5.  I have tried re-setting the network settings as suggested in another thread, and removing and reinstalling numbers and pages, switching off iCloud and switching it back on again, all to no avail.
    I spoke to Apple support and they told me I had to do a complete restore of my iPad, but that means losing all my settings, apps, photos etc which is rather drastic if I'm not convinced it will work (and I'm not convinced!)
    It seems a lot of people have this problem and it seems to be random if it is affecting some iPads or phones and not others.  Really weird, I wish Apple would get it sorted, they have a habit of not liking to admit it's a problem.   I suspect it is connected in some way to this iCloud drive, which I have not updated to, as it does not work with Mavericks and we don't yet have Yosemite (thanks again, Apple, if they are needed together why release iOS8 and not Yosemite?
    Lesson learnt - don't update until Apple have released the first fixes!!
    If anyone finds a solution, please let us know!!

  • Lync Status Not Updating Until Group is Expanded

    Hello all,
    I am having an issue that I can't seem to figure out. For the Groups view, the group doesn't seem to update a person's status when collapsed. After it is expanded, is only then the status will update and the person will go into a different group or move
    up or down the list, depending on filtering. Also if the expanded group extends past the bottom of the Lync window, those contacts don't update until seen. This also happens with the Status View as well. You need to scroll through the entire list to update
    everyone's status.
    Is this part of Lync or a bug? I am really hoping it is an issue because trying to find people after their status updates is annoying.

    Hi,
    Did you try deleting the Lync Profile. 
    Please try to delete the profile and check the presence. 
    %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
    Is your Lync client is installed with latest Patches?
    Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

  • HT4623 Why on earth don't you tell people to back up contacts and photos before they update software? There was no mention of the need to back up until it was too late. I have lost hundreds of valuable phone numbers and photographs.

    Why on earth don't you tell people to back up contacts and photos before they update software? There was no mention of the need to back up until it was too late. I have lost hundreds of valuable phone numbers and photographs.

    The update process DOES back up contacts and photos, unless you interrupted the backup. The manual tells you to sync contacts to an app on your computer, and to import photos regularly to your computer. So Apple DID tell you to back up, you just didn't bother to read it.
    If you didn't sync yet (and even if you did) connect the phone to your computer, right click on its name, and choose "Restore from Backup". If there's more than one backup choose the one with a timestamp before you updated.

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

  • I turned off firefox update but it is getting turned back on and telling me firefox 5.0 is available. I don't want firefox 5.0 until all my plugins work and I don't want to be bothered. I will followup in a few months.

    I turned off firefox update but it is getting turned back on and telling me firefox 5.0 is available. I don't want firefox 5.0 until all my plugins work and I don't want to be bothered. I will followup in a few months on update. I use Ccleaner to delete tracks/history/cookies/passwords/site pref and to compress FF DB.

    Hi czigrand,
    Thanks for visiting Apple Support Communities.
    Currently, you can gift dollar amounts or individual items (EG. songs) on the iTunes Store. See this article for more information:
    In the iTunes Store, you can gift a dollar amount or specific music, movies, TV shows, or apps from your iPhone, iPod touch, iPad, Mac, or PC. Follow these steps to send a gift from the iTunes Store.
    iTunes: Sending iTunes Gifts
    http://support.apple.com/kb/HT2736
    Best Regards,
    Jeremy

  • Stretched text and image with FULL_SCREEN_INTERACTIVE after Air player update

    One of my Air applications uses StageDisplayState.FULL_SCREEN_INTERACTIVE to switch to full screen during the presentation of some sheets.
    Everything worked fine untill some users reported a streching of texts and images in the sheets.
    It turns out that the problem occurs after an update from the Adobe Air Player to 3.1 from  2.7.
    The first screen shots shows the text as it should be, the second screen shot shows the text after the update of the Air Player.
    The code used to go into the Full Screen mode is:
        public function setFullScreenInteractive(fullScreenWidth:int = Constants.INT_SCREEN_WIDTH_SMALL, fullScreenHeight:int = Constants.INT_SCREEN_HEIGHT_SMALL):void
                             s.fullScreenSourceRect = new Rectangle(          0, 0, fullScreenWidth, fullScreenHeight);
            s.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;
    with  Constants.INT_SCREEN_WIDTH_SMALL = 800 and  Constants.INT_SCREEN_HEIGHT_SMALL = 600.
    I can reproduce the problem on a couple of computers with Windows Xp but it's not happening on all the computers I've tested.
    Any idea how to fix this (without telling my users to Uninstall the current Air Player and reinstall the Air Player 2.7)?
    Regards,
    Bart

    Hi Bart,
    Unfortunately the correct screenshot link appears to broken.  Could you please open a new bug report on this over at bugbase.adobe.com?  Please post back with the URL so that others affected can add their comments and votes.  It would also help if we had a sample project/application that we can reproduce this issue with.  If you'd like to keep this private, please feel free to send it to me directly at [email protected]
    Thanks,
    Chris

  • Just updated to IOS 7.1.2, now some games and apps don't have sound.  What to do?

    I Updated to iOS 7.1.2 and some of my already installed apps and games don't have sound.  Some apps and games do have sound.  The sound was never adjusted on any of the games.  I tried deleting and reinstalling the ones with no sound and still no sound.  how can I resolve this issue?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • Images still not updated -- graphs dont show!

    Hi,
    APEX was upgraded to 3.2.1 (from 3.0.X) and the image folder was with it. By updating the image folder many graphs didn't work because they've been built with the Integration kit syntax. I did most the steps here: http://anychart.apex-evangelists.com/pls/apex/f?p=755:17:0::NO:::
    Now I did the second steps although the HTTP server is on a separate server to the database...looking at APEX the images havent updated...they're still using the old files which were removed in the "Create Graph" window and graphs made already don't display (bad syntax). Ideas?
    Mike

    updated with an older version of the standard charts :/

  • Hi, Thunderbird just done an update on my computer but now in e mails iv`e lost all my folders I had, For example I had a folder for my receits and other thing

    Thunderbird just done an update on my computer but now in e mails iv`e lost all my folders I had, For example I had a folder for my receits and other e mails I wanted to keep.

    can you provide a bit more info before you do anything.
    I'm presuming this is a pop mail account - please confirm.
    First, make sure hidden files and folders are visible:
    The AppData folder is folder is a hidden folder; to show hidden folders, open a Windows Explorer window and choose "Organize → Folder and Search Options → Folder Options → View (tab) → Show hidden files and folders".
    * Help > Troubleshooting Information
    * click on 'show folder' button
    * click on 'Mail' folder.
    * Please post image of the contents of the 'Mail' folder.
    In thunderbird:
    * right click on mail account name and select 'Settings'
    * Select 'Server Settings' for the mail account
    * Look bottom right for 'Local directory'.
    * Put mouse cursor in the text box, then use keyboard arrow keys to navigate to the far right..some of the directory will be hidden as it does not fit it all in, so keep going to the right until you reach the end.
    * Then left click, hold down and move mouse to the left to highlight the entire entry.
    * Right click on highlighted area and select Copy.
    * Paste info into this question in the forum.

Maybe you are looking for