Graph axis label in report generator

HI,
can someone help me with my problem ?
I need to add axis labels into graph that i made by Labview Report generator. Is there any possibility to do that ?
Thank you a lot.
Patrik :-)

This is not an Idea on how to improve LabVIEW. It is a general LabVIEW question asking for help.
You need to post it in the LabVIEW forum.

Similar Messages

Graph axis labels

How do I change the graph y-axis to display the values 0 - 100% of my data?
I've have some 2D arrays each containing sets of data which I'd like to plot against a % label (not % of the data!). The data within each array are all the same length (because I have re-sampled the data within the array), but no 2 arrays are the same length. The first element represents 0% and the last 100%.
Thanks

Hi Graham,
- you can change the Y-axis label to whatever you like, "Amplitude [%]" would be possible...
- you can switch off autoscaling and set your own scale range from 0 to 100
Easy as it is.
Do you want something else? Could you show a small example?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Default Query Template - Graph axis label alignment

We have BW3.1 and are using a modified Default Query Template. I am trying to set the alignment of the labels on the x-axis to diagonal (bottom-left to top-right) and although the preview shows the correct alignment, when used in conjunction with a query it defaults to vertical.
It works fine if I develop a specific web template for a query, but not for adhoc queries.
Any suggestions?

I'm guessing this happens at 30 degrees as well: Bug 10199188 : CHARTS X AXIS LABEL IS BLURRED AT 45/60 ANGLE
This bug was apparently fixed in the 11.1.1.6.6 Patch Set. Oracle Support does not have a workaround for this either.
Please award points if helpful/correct.

Can I align the orientation of axis labels in a graph generated with the report generation toolkit (Word)?

I was wondering how to align the axis labels, i.e. 90 degree or such when creating a graph with the report generation toolkit in word.
I can do it after the document is created through Format axis title -> alignment but is there a way out of LabVIEW?
I'd especially like to rotate the y-axis label by 90 degrees.
Thanks a lot,
Juergen

I think he means he can modify it by hand after the report has been generated... But what I want to do is generate the word graph out of labview already with the rotated axis label...
After I posted this I found out that we can do this with a macro and use it from labview, but unfortunately I don't know VB, or VBA...
Like this:

Setting the title font and axis labels in a graph created with the Report Generation Toolkit

I'm using the LabVIEW Report Generation Toolkit for Microsoft Office to generate Excel worksheets containing plots. Unfortunately, the default font size used in the plots is huge (see attached worksheet). I was able to use Excel Set Graph Font.vi to reduce the size of the axis labels, but there does not appear to be a function to do this to the title and legend. In addition, there does not appear to be a function to set the axis text labels. Before I write my own, has NI released additional functions to perform these tasks?
Thanks for your help,
Zach Lerner
Software Engineer
OnWafer Technologies, Inc.
Attachments:
Test1_-_embedded_graph's_title_and_legend_font_is_huge.xls ‏14 KB

Hello Zeidan
The graph title and legend font sizes can be changed by accessing a low level VI (Excel_Insert_Chart.vi) that is part of the excelsub.llb that is located at (C:\Program Files\National Instruments\LabVIEW 8.2\vi.lib\addons\_office). This VI is called dynamically from within the Excel Insert Graph.vi and it uses VI server technology to access the Excel exposed properties. Attached to this post is an image of the block diagram of this VI after I have modified it to set the font sizes of the title and legend to 15. The circles in the image represent what I had to add to accomplish this.
Best Regards,
Ayman Kabire
Attachments:
Excel_Insert_Chart.JPG ‏99 KB

Add axis label to a graph in word report

Hi,
Is there a way to add an axis label for the graph in a word report? Thanks!
Tom
Solved!
Go to Solution.

I would guess that there is, but it would be a word automation function.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Does not display axis label in graph when exported to excel

I have a wierd issue.I have a report with graph with coloum chart and axis labels description on x axis.WHen i export the report to PDF everything looks OK.But when i export it to excel few axis labels disapper.Out of 12 labels only 2 apper when exported to excel.Has anyone encountered this issue.
If so is there a way to fix this.
PS: I am using BO XI 3.1 Webi.
Thank you,
Sanjeev

hi,
I have tried this out with a sample.
In WEBI preview mode and PDF, all axis labels will appear fine.
But when exported to excel, some labels will disappear.
Workaround: We have to increase the chart size in Excel till all axis labels appear clearly.
Regards,
Vamsee

XY Graph reference to report generator issue when program is compiled

I am using Simplicity PDF generator to add a XY Graph to a PDF report, same handle is used in Excel report and works fine. The XY Graph shows up fine when the code it run in development mode, when run as executable, the graph insert routines fail for lack of finding the temp *.bmp fle for the graph 1172. See attachments. Anyone have any idea why the loss of the handle/temp graph error?
Solved!
Go to Solution.
Attachments:
CreadePdfFrontPageWiring.jpg ‏199 KB
ErrorReport_SN 108 Run 005e.txt ‏2 KB

As you said, the error simply says that it can't find the file, which most likely means that the file wasn't created.
My guess would be this - you're creating the graph in the subVIs with the + and control icons (which is presumably PDF_Generator.Writer.AddImage.vi) and the VI which is shown in the image never has its FP displayed.
By default, LV removes the FP of all the VIs going into the EXE unless it decides it's going to need the FP. If the FP is removed then the image of the control cannot be accessed and that would presumably prevent the file from being created. The easiest way to confirm this is to create a static property node for one of the controls on the front panel. This will force LV to keep the FP when building the EXE.
If that doesn't help, then you need to see exactly where the BMP file is supposed to be generated and see if you can log an error from there.
Try to take over the world!

How to avoid repeatition of axis labels in Graphs in WebI 4.0??

Hello All,
I am working with graphs in WebI 4.0. In category axis, the labels are being repeated thrice ,twice and so on based on the filter which I have placed according to my requirement.. I need them to be displayed only once. I have used axis label delete factor from Format chart. But then it solved only partial problem. Appreciate your help.
Regards,
Anila.

plz
try this
create a one more vertical table
and check that location-text and location-key are some .
we think it would be like this
location-text     location-key
can                          01
cbg                          02
det                           03
txc                           04
txc                           05
bec of different key and some description the axis is getting repeating.

Graph X-Axis Labels are appearing in middle for negative y-axis values

Hi,
In my Graph Output, the X-Axis Labels are appearing in the middle (where zero is appearing) if the Y-Axis values are negative.
It's a Line-Graph.
Can anyone let me know how to move the X-Axis Labels to down?
I'm using a custom Function module same as 'GFW_PRES_SHOW_MULT' wherein I'm modifying the line colors and appearance. I have to edit in this Function Module to make the X-Axis Labels appear correctly (below) even when there are negative values.
Please let me know which Parameter of the Class CL_CU_AXIS I've to use.
Here's the piece of code:
CALL METHOD graphic_proxy-ref->add_cu_bundle
            EXPORTING
              port   = if_graphic_proxy=>co_port_chart_y_prim_axis
              bundle = bundle_axis
            IMPORTING
              retval = local_retval.
Thanks & Regards,
Sowmya

Hi Sowmya,
Im Lakshmi working as an ABAP Developer. I have seen your profile in SCN. I saw your postings about OLE charts.
I have a requirement to
1) Output data from an internal table into excel, and
2) Create a chart from the data in excel
So far I have been able to export the data using OLE calls, created a chart object,.
My question:
1. How to put Data Lables
2. How to put Data Table under the Chart
3. How to rename the series names.
Below is the recorded Macro. I don't know how to convert it to ABAP.
Sub Macro1()
ActiveSheet.Shapes.AddChart.Select
ActiveChart.ChartType = xlColumnClustered
Application.CutCopyMode = False
ActiveChart.SetSourceData Source:=Range("B1:E4")
ActiveChart.SeriesCollection(1).Name = "=Sheet2!$A$2"
ActiveChart.SeriesCollection(2).Name = "=Sheet2!$A$3"
ActeChart.SeriesCollection(3).Name = "=Sheet2!$A$4"
ActiveChart.SetElement (msoElementDataLabelOutSideEnd)
ActiveChart.SetElement (msoElementDataTableWithLegendKeys)
End Sub
I have attached the current output and expected output.
I have searched about this in google but i could not find any solution for this.
Your help is greatly appreciated.
Thanks,
Lakshmi.

How to edit axis labels in CR charts for crosstab report?

I have a crosstab report created from tha table where column names havie sort order attached to it as 01_Jul FY10, 02_AugFY10 etc and I am able to remove it in format field dialog box using dispaly string formula editor. So I am to display columns in specified order. but when I create chart , axis labels display column name with sort order. Is there a way I can remove sort order from column names while displaye in the chart and the legend entry box.
Help on it is highly appreciated.
Fizza

Carl answered this one already

Rename cursor axis label for a XY Graph

Hello,
I am using Labview 8.2 and would like to relabel the axis of the cursor legend for a XY graph. Presently the cursor lengend contains X (for the X axis) and Y for the (Y axis). I would like to be able to rename the labels of the X and Y axis of the cursor lengend to give the user a more accurate description of the axis labels.
Regards,
Kaspar
Solved!
Go to Solution.

The changes that were made changed the names of the cursors, not the name of the X and Y axis. Think of it this way suppose that I have a X Y graph of Frequency (on the X axis) and Amplitude (on the Y axis). I create a cursor on the graph and move it around the waveform to examine the characterictics of the signal. When I move the cursor I would like the see the frequency and amplitude where the cursor is at on the signal. Right now the user has to remember (not to difficult) to figure out that the X axis is frequency and the Y axis is amplitude.
So I would like to be able to rename the header of the cursor location from X to Frequency and Y to Amplitude.
Regards,
Kaspar

Labview Intensity Graph Vertical Axis Label

When I change the font of the vertical axis label of a Labview intensity graph, the label disappears. Is this a Labview bug or is there a way to correct the problem?

Here are those screenshots... I was a little quick to submit
- JLS
PS - of course, when you're editing the free label, it doesn't have those nasty affects, and if you group the objects (see the Free Label and Grouping screenshot) it behaves (at least cosmetically) much like a native graph label
Best,
JLS
Sixclear
Attachments:
Free Label and Grouping.JPG ‏81 KB
While Typing.JPG ‏66 KB
After Typing and Clicking Off the Graph.JPG ‏67 KB

Graph Data does not align with the axis label

Hi,
The graph data does not align with the axis label when
datetimeaxis is used.
http://livedocs.adobe.com/labs/flex3/html/help.html?content=charts_displayingdata_04.html
(in the using parseFunction property example) when you hover on the
line graph the values do not align on the labels. Is this a bug?
Can somebody help me with this.
Thank you,
Gautam.

Hi All
Thanks for looking into it.
Actually we have just added a field GJAHR (was missing in the extractor) so that it takes data accoring to fiscal yr. Actually we had a issue that the Business area for a particular vendor 'X' and doc no 'Y' was showing incorrectly (similar to that of yr 2008) but it changed this yr and the extractor was still picking Business Area for yr 2008.
So we added GJAHR field so that it takes correct Business Area. we have checked in R/3 Extractor checker and it shows correctly.
But that change has not reflected in BW yet even after replicating datasource.
I hope i have made you all understand the situation.
Thanks for your help
Ishi

How to Use 2 Separate Y-Axis in Report generating Tool Kit

Hello
How do I make 2-Y-Axis chart on Word document from Report Generating Tool Kit?
Now can make Chart to appear in Word document with Multiple plots, but all plots go to same Y-Axis.
I want to put in chart two Plots with Same X-Axis, but different Y-Axis.
I know it is possible manually in word, but how can I do it with Labview RGTK?

hmm, yes. I guess that is the only alternative. But is there anyone who has made something similar in the past?
I am not sure how to interpolate this data to an array of 30 000 data points without loosing data in the beginning.
Since it is exponential, the first few dozen datapoints are at really low freq. All about 10.xx Hz and increasing.
Then in the end of the array, i have like one datapoint at 15kHz, one at 15,5kHz etc. Will be alot of gaps in my array and alot of lost data in the beginning I think.
It's strange though that labview doesn't allow for waveform, or atleast let me put an XY-array into these methods since i believe always you want an logarithmic freq-axis when having a frequency-response to handle.
Anyway, anyone who has a nice little VI that interpolates data like this?

Graph axis label in report generator

Similar Messages

Maybe you are looking for