Graph Editor bug

Hello there, I'm having some problems with the graph editor on After Effects CC 2014. It shows like in the images below, almost as if the software couldn't process the graph, and it slowly starts to get more curved. Also I can't edit or even barely see the anchors, and it shows the curves for all the animated parameters, even though the option "Show selected properties" is enabled. It happened twice so far, and is related to specific comps, I checked on other comps in the same project and they were working just fine. My only guess so far is that it happened in comps where I am using that new script/preset called Ouroboros, but I'm not sure it's related to that, since the bug appeared on other layers without that effect. Any one has any clue or had this problem before?

Yes, expression evaluation can cause these behaviors and the script uses them extensively. Nothing wrong in that regard. The rest is unclear because you made your screenshots useless by clipping out the important info like the property names. Also full system info,exact graph editor options and all that will be required.
Mylenium

Similar Messages

Ae 13.1 graph editor unusable!

My graph editor has become completely useless. Can't grab any of the points and when I some how manage to they just snap into place with absolutely no control. Plus when I try to do a mass selection it's not even corresponding to where my cursor is.
Anyone else getting this issue?
Here is a video of what's happening:

This Graph Editor bug is fixed in the After Effects 2014.1.1 (13.1.1) update:
http://bit.ly/AE_1311_details

Draging view with mouse in Graph Editor?

Only for me dragging view with Middle Mouse Button not works in Graph Editor in CC 2014.2?
Or maybe this is intentional enhancement?

You can send FeedBack:
Adobe - Feature Request/Bug Report Form

AE 13.1 graph editor odd behavior

Movement issue in the graph editor, it seems a bug because I can't adjust it freely.

Maybe more clearly in this video. It does an infinite sliding down.
This didn't happened to me in previous versions.

Un-editable curves in graph editor?

Are the curves in the graph editor not supposed to be standard Beziers with standard editing techniques? I'm very good at controling Bezier curves in any application (including the pen tool in AE), but adjustment handles in the graph editor don't seem to follow the same rules.
For example: if the starting control point is set to ease out, it has an adjustment handle to the right, which I can move horizontally only. There isn't any way of dragging the adjustment handle at an angle, to change the shape of the curve controlled by the point. If I click the control point with the convert pen tool (including Alt + clicking) the curve changes to a straight line. Alt + clicking the curve again doesn't change it to a draggable curve point. It also doesn't seem possible to drag a control point or adjustment handle with the convert pen tool, which is how I'd normally get a second adjustment handle or change a line into a curve.
Creating points with the add pen tool also doesn't create control points that behave normally. The documentation makes no mention of any of this, and describes the curves as standard, editable Bezier paths. Everything else in AE CS4 seems to be working normally.
Anyone have an idea?

As Mylenium cleartly explained, the graph editor can display a value graph or a speed graph for any chosen property. By default the Graph Editor is set to auto-select which kind of graph to show for each property. In other words, it will pick the one that arguably it's the most useful in most cases. Since one could consider a motion path -the vector path you get in the Comp panel to represent position- as the most natural way of displaying position property values, the Graph Editor defaults to showing speed when you select position.
Now, having control over speed is a great thing. But many people are confused because these handles don't rotate like normal bèzier handles do. Don't worry: they do not rotate, simply because as far as speed goes, rotating the handles doesn't mean anything.
More info on this in AE Community help's section Controlling speed between keyframes.
Another head-scrather is that the traditional value graph for position is limited in that you can't use normal bèzier handles in it because the XYZ values are tied together. New in CS4m you now have the ability so separate dimensions, ie get separate properties for position x, position y and position z. When you do that, you get the same vector controls in the Graph Editor.
Take a look at Separate dimensions of Position to animate components individually in After Effects Community Help.

Score Editor bug: syncopating a note disturbs line layout

In the example below, the instrumental part with max 2 bars per line has been created with the Layout Tool, and then the selection saved as a Score Set ( which i hope locks all the page details in place).
[img] http://i364.photobucket.com/albums/oo82/dogliege/Picture3.png [/img]
I then noticed that the red circled note is not displayed correctly - it should be a dotted eighth note and duly click on it with my Syncopate note command.
This then produces the following effect: it crunches up the bars and disturbs the line layout which was already set, cramming 3 bars onto the line above as in the example below.
[img]http://i364.photobucket.com/albums/oo82/dogliege/Picture4.png[/img]
Any solutions appreciated/workflow suggestions.. or is this just "..another L8 Score Editor bug.. wasting more of 2009"
PS Any suggestions as how to get the images to display in the post - as opposed to appear a link? cheers
Message was edited by: musicspirit

i should be enjoying my holiday but i couldn't help myself...
there are a couple of fixes for this.
first, try cutting the regions somewhere to force a redraw.
second, if no form of cutting or reformatting works, try copy and pasting the midi into a fresh autoload on the intel.
particularly if the file was created pre 7.2. there can be compatibility issues between ppc and intel.

Anchor point in the Graph Editor and where are the Tips

Hello All,
What is the purpose of an anchor point in the Graph Editor when you have "Show Transform Box when multiple keyframes are Selected" engaged. The pointer automatically turns into a PanBehind tool. I moved it inside, outside, on the line and it doesn't seem to have any inpact on the scaling of the transform box. Not only that, it pops back to the center when you switch from "Edit Speed Graph" and "Edit Value Graph"
I haven't used the graph editor much, if ever and was also curious to know what/where are the graph tool tips. I haven't seen any difference when Show Graph Tool Tips is selected.
Thanks in advance
on a mac cs5.5

OK, I see the Tool Tips are displayed when you hover over a keyframe or the path that is made.

Graph editor showing 2 separate curves

hi.
suddenly my graph editeor began to show 2 separate dimensions for x and y, even though the Separte Dimensions button is turned off. How to i get back the single curve for x and y in graph editor?

Click the "Select graph type" button (the one just after the eye on your image) and in the menu choose "Edit Speed Graph".
You'll get the speed graph back (instead of value graph).
Xavier

Can't pull the yellow handles in Graph Editor up and down

I'm trying to fidn a solution for over an hour already.
I can't pull the yellow handles in Graph Editor anywhere like I see it in all the Tutorials. I can only pull it left or right and make it longer or shorter. But when I try to pull it up, the entire point will go up as well.

Thanks a lot for an answer Appreciate it.
No but.. it doesn't work on any.. tried the value graph, speed graph.. or whatever.. I tried it all and none of them worked.... mhh..
Tim

After effects speed data in graph editor not coherent

Hi, im animating the typical bouncing ball, and i have activated separate dimenstions to animate X,Y separate. So i add two keys on the X value that has a constant speed, then i animate the Y value, but i notice that the speed goes below zero in the graph editor and i dont understand it..
Should it not be Zero as the ball stops? (Green line)
Here you have an image with my situation:

You're making animating a bounce much too difficult. Way too much room for funky behavior.
Set your layer at it's starting point, set a position keyframe, then move the layer to it's ending point but keep it at exactly the same height (y value). Now add this expression and adjust the Frequency, amplitude, and decay to get the path you want. The amplitude is the number of pixels you want the ball to fall.
freq = 1.0; //oscillations per second
amplitude = 90;
decay = .5;
posCos = Math.abs(Math.cos(freq*time*2*Math.PI));
y = amplitude*posCos/Math.exp(decay*time);
position - [0,y]
Your graph will then look like this:
and you'll have a much more realistic bounce.
Thank Dan Ebberts for the expression with a very slight modification by me. BTW, save this as an animation preset and you've always got it when you need it.

Graph annotation bug ??

Hi,
I have encounter the annotation error on graph again. And this time, I have upgraded my LabVIEW to version 8.6.
Some of the points is perfect, but some of the points, pointing to the correct x-coordinate but the label seem gone far away.
Here I attached the screenshot, and the VI.
Thanks for your time. Any idea or comment please leave here. Thanks again.
Message Edited by engwei on 01-21-2009 02:42 AM
Attachments:
graphCrazy.vi ‏43 KB
graphcrazy.JPG ‏83 KB

Yes, expression evaluation can cause these behaviors and the script uses them extensively. Nothing wrong in that regard. The rest is unclear because you made your screenshots useless by clipping out the important info like the property names. Also full system info,exact graph editor options and all that will be required.
Mylenium

[svn] 3738: merging fix for LCDS-329 to trunk (XML graph serialization bug)

Revision: 3738
Author: [email protected]
Date: 2008-10-18 08:47:18 -0700 (Sat, 18 Oct 2008)
Log Message:
merging fix for LCDS-329 to trunk (XML graph serialization bug)
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-329
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf3Output.java

Zoom shortcut for graph editor?

Is there a keyboard shortcut to zoom the height of the graph editor? I want to disable the autozoom... Thx.

If you disable auto-zoom, then you can Alt-drag with the Zoom tool to zoom vertically. Is this what you want?
See
"Pan and zoom in the Graph Editor" for this and related instructions.
If that doesn't answer your question, answer back here and/or leave a LiveDocs comment.

CS4: Graph Editor video Tutorials?

Hi All,
I've been looking for intermediate/advanced video tutorials for the Graph Editor in AE, particularly in how it applies to Time Remapping. There's a few things out there but they seem to be very basic, includng the stuff from Lynda.com. Mostly for use with Time Remapping, I want to learn the Graph Editor inside and out. Anyone know of any good sources? Thanks.

Thank you for the useful link. The motion aspect of the Graph Editor is very straight forward, much like the graph editor in Lightwave. It is when editing time remapping keyframes in the Graph Editor where things can be somewhat unpredictable or counterintuitive. For example: a 1 minute video clip. I may want to speed up and slow down different portions of the clip while leaving other portions unchanged.
It took me a while to figure out what was going on with time remapping. In order for the net length of the video clip to remain the same, if you speed up a portion of the clip, then other portions of the clip must necessarily expand (slow down) so the overall length of the clip is the same. However this may be an unwanted byproduct.
For instance, Let's say I have a video clip of exactly 30 seconds. I want to slow down the middle 10 seconds. So I set a time keyframe at 10 seconds (keyframe 1) and a time keyframe at 20 seconds (keyframe 2). I now move keyframe 1 back to the 5 second mark, and keyframe 2 forward to the 25 second mark. That portion of the video (between 5 and 25 seconds) now plays slowly as expect. However the first and last 5 seconds of the video are now playing quickly, because as we can see in the Graph Editor, the speed of the first and last 5 seconds have been moved up, or "squashed" to accomodate the slower, middle section of the time remapped video. I hope I'm being clear.
The only way I've found to correct this is to first allot more overall time for the clip in Composition Settings, and then extend the tail (and/or the beginning) of the video clip. Then keyframe 1 must be selected with keyframe 0 (the first keyframe added by enabling Time Remapping) and moved back together, and keyframe 2 must be selected with last keyframe and moved together as well. As a result, the beginning and ending 5 seconds of the clip will now play at the proper, normal speed.
The process can get more complex, though, when time remapping a much longer clip, where numerous time remapping transitions will be occurring. Is the only solution to split up the clip, do the time remapping on the now several existing layers, and then move everything around until it looks fluid?
I may be missing something, but it seems to me that there should be some sort of "intelligent" feature added to Time Remapping that could recognize unchanged portions of a clip, and expand the time settings of the project, etc. to automatically accomodate for this.

Message editor bug: Ctrl-Z and Ctrl-Y not working

Hi!
I am writing a reply, where I am inserting a lot from Word-documents and web-pages.
When I pressed Ctrl-Z, a large block of text, including an inserted quote, disappeared, and when I pressed Ctrl-Y it did NOT reappear, so there must be a bug or two in the message editor.
I am not sure what else to tell about it, but it's kind of shocking.
I have noticed before, that when you use Ctrl-Z and Ctrl-Y the editor-window does not scroll up and down to show you WHERE you are undoing/redoing something. That is also quite confusing!
And BTW: When you mark something, there is no cursor, to tell you if you are at the end of one line or at the beginning of the next. That is also quite annoying.
Best regards,
Henrik R.

When you insert your word document are you using Paste without formatting (Ctrl+Shift+V).
All bets are off if your pasting the horribly contaminated data from a Microsoft office document without using a text only filter. It is an unfortunate fact of life that an email containing text pasted from Microsoft word can cause a virus alert due to it's internal references to OCX controls.
It also contains complex data structures that are only meaningful to Microsoft office. However they are more than enough to scramble other editors as they often do not form valid HTML. Just another occurrence of Microsoft "innovating"

Graph Editor bug

Similar Messages

Maybe you are looking for