Graph in reports -- Values in Y-axes

hi all,
I want to do a Gantt chart principle with in a report
to show the employee leaves against thier periods
the table structure simply is :
EMP_ID
EMP_NAME
LEAVE_TYPE
START_DATE
END_DATE
so i want the EMP_NAME on the Y-axes , and the calendar date on the Y-axes,
and the bars will shows the start date and the end date against each employee
did anyone had this issue before?
is there a workaround with graphics ??????
as all knows the only data type allowed on the Y-axes is numbers.
please help me in this issue:
my E-mail is : [email protected]
Regards,
Amjad Hijazi

Hi,
It is possible, Create a Group report and insert graph between groups, while defining the graph using wizard, you select once per *(Group repeating frame) in position panel. then, You can see the graph for your three results.
Thanks,
Oracle Reports Team.

Similar Messages

How do I graph multiple bit values on one time axis?

I want to graph multiple bit values, all of which will change back and forth from 0 to 1, on the same time axis, but I don't want any visual overlap between the different bit value traces. Now I could do this by graphing bit one as either 0 or 1, bit 2 as 2 or 3, bit 3 as 4 or 5, etc., but I would really rather have multiple Y axes showing 0 to 1, stacked vertically on the same time (X) axis.
You could visualize this as multiple pens on a strip chart continuously recording different values. Each pen has its own vertical area in which it writes, but all pens could be writing data from the same numerical range.
Hmmm... I think my description might be roughly as clear as mud, but if anyone out there can figure out what I am asking and has potential solutions, please let me know.
Thanks!

Thanks. I will look at that VI, but I think I have already seen it. My problem is that I have CAN data coming in for an hour or so, but the time interval between receiving specific CAN arbitration IDs varies, so I want to plot the X axis against specific, varying time values, not a standard dT. I'm not sure I can do this on a digital graph, but I haven't given up hope yet.
BTW, I am receiving 8-byte CAN packages. Some of the bytes represent actual values, but I need to break others up into individual bit values to see error and status flag settings. Once I break the bytes into bits, I convert from analog values to digital values.

When displaying multiple curves on one 2d graph in reports how do I force one curve to be in the foreground?

When displaying multiple curves on one 2d graph in reports how do I force one curve to be in the foreground? I have two signals and I want to show one overlayed on top of the other. Right now Diadem will only graph it the other way around. I have tried deleting the curves and re-adding them in differnt orders, changin the order they are in the curve list, changing their order inthe data portal, right clicking on the curve and selecting "move to forground" (this only moves the entire 2-d graph object to the foreground). Im using Diadem 12.0 Basic.
Solved!
Go to Solution.

Hello Joe,
I figured out what causes your curves to draw in the wrong "order".
You are using two Y-axes, and DIAdem always draws the data for Y1 before Y2, no matter what the order of the curves is in the "Curve and Axis Definition" dialog.
I am attaching your layout with a small modification, I changed the Y1 and Y2 axis order (I swapped which Y-axis the data is displayed on), and I get the following result:
Once I looked at your layout it became clear why the order of the curves didn't reflect the order in which the curves were drawn. I didn't know this - so I just learned something new here as well.
I hope this answers your question, feel free to ask if there is anything else I can help you with.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."
Attachments:
Modified Report Layout.TDR ‏146 KB

How to get the last "reported" value in a cross tab

Dear all,
based on a BeX Query Universe I have built a report with a cross tab in webI.
Maybe you can help me with the following issue. There I have a problem: I want to get in the Total-column always the last reported value, e.g. for Number Total Customers "66", not for Mar or Apr, because they are null.
Calendar Month                      |Jan| |Feb| |Mar| |Apr| |Total|
Number Total Customers         |54|    |66| | |      | |       66
Number Active Customers      |57|    |71| | |      | |       71
I hope that you understand my problem and could help as soon as possible.
Thanks a lot in advance for your support.
Best regards.
Edited by: HOLWUE on Feb 8, 2010 1:40 PM

Hi,
If this question is related to Webi then post in the below forum.
http://scn.sap.com/community/businessobjects-web-intelligence/content?filterID=content~objecttype~objecttype[thread]
Regards,
Sujit.

Migrating Graphs from Reports 6i to Reports 10g

While migrating Graphs from Reports 6i to Reports 10g is there a possibility of maintaining the same graphs rather than recompiling them using the Graph Wizard of Reports 10g. I have hundreds of reports with graphs and will be an uphill task to re-draft all the graphs. Kindly suggest alternatives to overcome this dead-lock.
Thanx in advance
Sridhar

Hello Sridhar,
10g is not supporting Graphics builder. So you got to create/insert all these 6i graphs in 10g. Open the 6i report and compile in 10g. It will give you file not found error. Delete the graph area in the layout editor.
Then drag the chart icon and drop in layout. Redesign again. Offcourse it is not fun. But there is no way.
Also there are tons of bugs in 10g report Graphs. You won't find some cool features like Others % option in the pie slice provided by Graphics bulider. You got to change graph.xml file for some of the features. Even the graphs looks ugly in 10g. Migrating graph reports is really frustrating in 10g. But we have no choice. Recently we migrated to 10g. Becareful with matrix reports. 10g keeps on getting crashed when ever we develop matrix report. GOD knows the reason.
But 10g has some very very good features like Distribution
Cheers.
Ram.

Zoom bar error in OBIEE11g(version:11.1.1.5.0) in Graph view reports.

HI,
we are getting the following error message while trying to perform Zoom in or out option in the graph view reports in IE8 browser .
Error message:An error occured while processing your request.Please contact your site administrator.
Note:Its working fine in Mozilla Firefox browser,But my client using IE8 browser, Hence the issue .
Please help me on this ASAP..
Thanks & Best regards,
Purna

I have exported ODBC path manually.
export ODBCINI=$ORACLE_INSTANCE/bifoundation/OracleBIApplication/$ORACLE_BI_APPLICATION/setup/odbc.iniAnd then executed the nqcmd command. Now I am getting the different error.
Oracle BI ODBC Client
Copyright (c) 1997-2011 Oracle Corporation, All rights reserved
Initialize client environment failed, possibly caused by incomplete installation
[nQSError: 47001] Invalid Oracle BI Bin directory:
/oracle/home/bifoundation/server/bin.
Initialize client environment failed, possibly caused by incomplete installation
[nQSError: 47001] Invalid Oracle BI Bin directory:
/oracle/home/bifoundation/server/bin.
[0][State: IM004] [DataDirect][ODBC lib] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed Connect open failed

How can we pass the master report value in to detail report

Hi All,
My question is how can I pass the master report value in to detail (Child) report filter?
I mean I have one master report if I click on employee name then I have to pass the employee id in to details report filter. Then detail report will display data for that particular employee.
How can I achieve this one in OBIEE?
Please help me to resolve this issue. Thanks in advance for your time and support.

In that case, you should look at using Go Url. In your column formula for the employee name, create a hyperlink to the detail report and pass the employee id.
Take a look at this post: Re: Dyanmic display of the Image Link URL
Thanks!

How to find report values using report writer

hi,
Please help me.
How to find report values using report writer
Regards,
RRK.
Edited by: Alvaro Tejada Galindo on Feb 6, 2008 12:01 PM

Thanks all for the reply.
I am trying to solve a problem where report parameter value that is set at Management Console is wiped out after calling replaceConnection.
databaseController.replaceConnection(oldConnectionInfo, newConnectionInfo,
null,DBOptions._doNotVerifyDB);
We have to support changing database connection from a java utility
class. But once replaceConnection is called all existing static parameter values are lost. To fix this issue we thought of getting parameters and values before calling replaceConnection and setting it after replaceConnection.
Version is CS2008 SP3 - version 12.3.0.601
If there is any other option of fixing the original wipe out issue?
ParameterValues.getValues() didn't return value. I will try ParameterValues.getCurrentCalues() but the document says ParameterValues.getValues() is equivalent to the IParameterField.getCurrentValues() method unless it is empty, in which case it is equivalent to the IParameterField.getDefaultValues() method.
So getCurrentValues() may not work.

Calling graph from Reports created in graphics builder?

Can you call a graph from Reports 6.0 that was created in Graphics Builder. I know you can call a graph from Forms. I tried creating my graph right in Reports with the wizard but for some reason it does not give me the fields I want to use in the available fields column, so I created the graph in Graphics Builder. Do you use a trigger of some sort. Any examples would be appreciated if this is possible. Thanks

Justin Beno:
Yes, you can call a graph from inside a report. All you need to do is select the button with the graph on it (not the icon with the wand, which indicates chart wizard). Then draw graph in the area of the report where you want the graph to display. After completing this, right click on graph, select Property Palette, Chart - Chart Filename (this is where you will type in the directory and filename of your graph that you created in Oracle Graphics).
~Vannette

COPA report value wrong

Hi Gurus,
I have write a copa report , i have assigned in KE4I sd condition type to value filed, so +/- are assigned in PR00 and VPRS condition typs ..still i am getting wrong value ..ie Reversal document value also add to the report ex billing document Rs 2500 and reversal document Rs 2400/- but in COPA report value is Rs 4900/- why and where my config or report was wrong
let me know.
Regards
Vinu

Hi
Presently in costing sheet there are two continuous processes, both are considered as SFG (semi finished goods). The SFG 1 material in first process is the BOM part of the second process SFG 3 material. Both process has different cost centres, overheads and cost elements.
Now the second process of SFG material takes more than 9 months. So want to show this WIP under maturation stock, as separate stock under new SFG 2 material, with some value addition (considered as activity). This new process related SFG 2 material BOM will contains the first process SFG 1 material. And this new SFG 2 material code will be the part of BOM of the last process SFG 3 material.
Now there are 1 issues we are facing.
1st query:
In quality server after transporting the request from Development, Price difference account is generated while production of the 3rd Process SFG 3 material.
Production made for 1000 AL Qty (Base Qty of BOM 1000 AL and Costing lot size 1000 AL ) and in the entry we are getting the Price difference entry as shown below.
Dr. Inventory SFG3 - 105,897.43
Cr. Incr/Decr/Cons SFG 3 - 105,900.00
Cr. Price difference - 2.57
Cr. Inventory SFG2 - 94,550.00
Dr. Incr/Decr/Cons SFG2 - 94,550.00
Standard cost of SFG 3 for 1000 AL is 105,897.43 and Standard cost of SFG 2 for 1000 AL is 94,550.00
May i know why the price difference account is picked up while doing the production of existing material SFG 3, when there is no such difference in development server. And no Price difference account in Quality server before introducing the new process?
Regards
Vinu

Graph in Report 9i

Hi,
1. How can I add a bar graph in report 9i?
2. How can I call a OGD file from Report 9i?
Please let me know ASAP.
Regards,
Malay

You cannot create new chart modules because Oracle Graphics6i is no longer
shipped with Oracle Forms. However, you can display existing charts in Forms and
Reports applications that have been migrated.
The following whitepapers at
http://www.oracle.com//technology/products/forms provide additional
information:
regards
Vishwa

Regarding control graphs for external values

I have a set of values for a month for a particular material.
      day             qty.
ie 20080801      10
    20080802       15
    20080830       30.
I used GFW_PRES_SHOW
function module to plot values.
The control limit for the material is 30. I want to encorporate this value also in the graph and show the deviation.
Plz help me with some other function module
for control limit graph for external values.

hi,
check this function module.
GFW_PRES_SHOW_MULT.
also use these programs.
DEMO_GFW_PRES_SHOW_MULT
DEMO_GFW_SHOW1.

Graphs in reports 9i

i want to use graph in reports 9i but i could not find it in tool menu kindly let me know how can i add graphs in my reports

dont see in tool menu. check u r tool palette and with the other objects you can see the graph object with the field object just click and paste on u r layout. if you can not see TOOL PALETTE then press on mouse button on view menu and enable the TOOL PALETTE option and then u can find graph object with all other objects.
thanks

Graphs in reports

Hi all
how could we draw graphs for report.its an urgent.
Thanks in advance

Hi,
my standard recommendation:
use the Chart Engine - the 'next generation' chart compared to the GRAPH* function modules or the GFW. It's available as part of the IGS but also as an ActiveX control within the SAPGUI.
Have a look at the demo program GRAPHICS_GUI_CE_DEMO or directly at the class CL_GUI_CHART_ENGINE.
The customizing settings of your chart can easily be created by using the interactive SAP Chart Designer (see Downloads area of SDN - Web AS). After downloading it you also find the full description of the data XML within the package.
Regards, Kai

Unable to run graph on report server

i am unable to run the graph on report server
i have added the XML code from http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/howto/additems/add_graph_jsp.htm
Adding a graph to a JSP-based Web report
but its running on local machine when i copy it to aplication its not running
can any body tell me , what extension i want to add at application server JSP or REP
because when we create RDF we convert it into REP, what to do in JSP case or directly copy JSP file , its still not running
i called it from menu by
DECLARE
     runformat varchar2(10);
BEGIN
     runformat := 'PDF';
     run_report_object_proc('graph.jsp', runformat);
END;
or any other setting on application server or any other thing to run the graph
please urgent reply is highly appreciable
Thanks
Junaid

Thanks for the query, Nith.
Refer to the "Configuring JBoss as a Windows service" appendix in the Installing and Deploying LiveCycle ES2 for JBoss guide at this link. It should help you resolve the issue at hand.
If you need any further help, please post the relevant traces/logs and the argument that you used to set the Java heap size.
-Samartha

Graph in reports -- Values in Y-axes

Similar Messages

Maybe you are looking for