Graph legend and print options

When building a graph using the graphTable bean, I'd like to place the legend below the graph instead of above. How can this be done?
Also, the graph plots a number of lines, each of which is rendered in a different color. Is there a way to make the graph lines cross-hatched, or dotted, or something else so that when printed in black and white the user is able to associate the graph line with the legend?

Hi,
Take a look at SAP note #1049778. For recent releases, the device type HP4350 should be already available in transaction SPAD n the system.
Also as per SAP note #1049778, most of the new device types that were developed within the SAP Printer Vendor program (SAP note #1130927) support the new print options.(see SAP note #1103422)
Regards,
Aidan

Similar Messages

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

Sales Orders Screen: Preview and Print Option Not Available in Actions LOV

Hi,
We are using Custom Responsibility for Order Management.
We can't find the Preview and Print Option in Actions list(Sales Orders -> Query for Sales Orders -> Actions).
Kindly let me know how to add the Preview and Print Option to the LOV.
Thanks,
Tamil

Hello,
You have to find this function in standard responsibility and copy this name to your own.
Regards,
Luko

Savs as and Print options to be restricted in Portal DMS

Hi experts,
When the user opens a document in Portal DMS I need to restrict save option and print option.
Is this possible if yes could you please give me the possible solution.
Please help me in this
waititng for your response.
Regards,
Shilpa.

Hi Shilpa,
I think it can be done in client computer (windows settings)... check out this link to control the MS word pop up
http://www.shaunakelly.com/word/sharing/OpenDocInIE.html
Thanks,
Pradeep

Transfer order layout and print options

Hi Guys
Where we can see the Transfer order layout and Printer options settings in SPRO

Hi,
Refer to this path,
SPRO-IMG-Logistics execution-Warehouse Management-Activities-Define Print Control.
Regards
Ravi Shankar.

Open PDF with disable save as and Print option

Hello,
I want a pdf viewer to use it in my website with disabling save as and print ,i mean user only can see my books online.I need something like "books.google.com" viewer. It is possible thru java programming or with the help of any open source. Please provide me some solution i am in deep trouble.
Thanks for any reply.
Shambhu Mitra

You cna do this with the security options in the PDF file itself, which you can set with Adobe Acrobat, assuming you have access to the security options in the first place.

TS1702 I downloaded ibooks to my ipad so I have a place to save PDF files. I do not get the "open in ibooks" option. Only get "mail" and "print" option.

I downloaded ibooks to my ipad so that I can save PDF files to ibooks but I do not get an "open in ibooks" message to select. When I choose the icon, I only get mail or print option.

Where are these PDFs coming from? What do you mean by "save PDF files to ibooks" and then "I do not get an 'open ibooks' message? If they are saved to ibooks (I assume you used itunes to save a dragged in PDF to the ibooks panel in apps) then you should be able to open and view them in ibooks. If they are not in ibooks (I'm assuming this is the case, since you want to get an "open in ibooks" option from the *share* icon, right?) then where are they on the mini, which app?

Device type and print options

Hi all,
The device type HP LJ 4350 enables print options and allow us to set which paper tray is to used in a specific form.
However, our usual supplier does not sell this device type anymore.
Does anyone know another device type that could allow tray configuration in the SPAD transaction?
Thanks for your help.

Hi,
Take a look at SAP note #1049778. For recent releases, the device type HP4350 should be already available in transaction SPAD n the system.
Also as per SAP note #1049778, most of the new device types that were developed within the SAP Printer Vendor program (SAP note #1130927) support the new print options.(see SAP note #1103422)
Regards,
Aidan

Need a vi or a recipe for graph setup and printing

Has anyone got a vi that given a xy graph reference will twiddle the right properties to make an xy graph on a front panel look like it ought to in a published paper. White background, black lines, transparent legends, centered title, good fonts and font size etc. etc...
Also, if possible a way to print it to a file or printer so that what you see is what you get.
Thanks
LV 8.6 on Windoze XP

Clueless 1,
All of these properties can be customized except for creating a transparent legend transparent.
The font and font size can be easy changed by selecting the graph so it has the moving dash line around it and setting the font and size in the font menu. The defaut for this menu is 13pt Application Font.
The title of the graph can be centered simply by clicking and dragging it the the desired position. By default the title should snap to the right, center, and left justified position around the graph.
The colors of the major and minor grid lines can be access by right clicking on the graph, selecting Properties, and navigating to the Scales tab.
Changing to the plot background color is slightly more difficult because the property is not accessable the the Graph Properties dialog window.
To access this property right click on the graph and select Create » Property Node » Plot Area » Colors » BG Color
Place this property node on the block diagram
Right click on the property node and select Change all to Write
Right click on the block diagram to bring up the Functions Palette and select Dialog & User Interface » Color Box Constant
Wire the Color Box Constant to the input of the property node
Click on the Color Box Constant to bring up the color picker and select whatever color you desire. This wll be the background color for you graph.
The easiest way to export the graph to another program is copy and paste it. If you want to make an image of the graph so you can access it in a word processor I recommend copy and pasting it into Paint and saving it.
Mark
LabVIEW R&D

Where can I go to blog about paper and printing options?

I'm trying to modify our brochure pages to print on a Xerox printer, with Xerox paper. I am working in Illustrator, but I am having the dardest time getting a nice print. I'd like to know where I could get some suggestions??

Key Chain basics

Preview and Print not seen in Actions Tab

Hi,
I could not see the preview and print option in the actions tab of the sales order, from where is it originated???
What should i do to see this.
Regards,
prasad

Guys,
My XML Publisher was not installed, Thats why this problem.
Enabled this, Issue is solved now.
Prasad

Print PDF with special print options of Canon IR printer

Hi,
We have a collection (db driven) of PDF documents that we want to send to our network printers. Some document need a hole punch of some other specific printeroptions of a Canon IR printer.
The ideal solutions is a windows application where i could define virtual printers with their print options (pdf and printer specific).
Eg:
A user creates in a the windows app a virtual printer with name and print options
- FastPunch: Printer IR5570 with hole punch
- Fast: Printer IR5570
- Color: IR C4080
- ColorBooklet: IR C4080 with booklet options
When the app starts its batch it will look at de db and find rows with an PDF and the name of a virtual printer. The documents are printed with specific printer preferences.
Does someone has experience with such an solution? Tips?
Someone wants to make this in vb.net (or c#)? What cost?
gtx, Pierre

I have downloaded the Acrobat SDK but I haven't really waded through the documentation or samples yet. I've only been working on this project for about 3 days now and not full time. This isn't the highest priority at work. I've worked a bit with the adobe reader control and that looks like it has some promise.
I have two significant problems:
1) I don't want the user to see any windows appear other than my console application. That way I have it working right now, Acrobat is required and appears minimized while the file is spooled and then is closed after spooling completes. Not so horrible but I'd like to get away from it if possible. To print the file right now I'm using the startprocess module or something (new version of shell I think). I'm starting the pdf with the verb "Printto" and that tells Acrobat to print to a printer that I specify.
2)Biggest problem. I have no reliable way to change the number of copies or any other print settings. I am not willing to write a program that spools a single copy multiple times just to get multiple copies. Currently my program uses rundll to open a printer preferences dialog, and SendKeys to modify the print settings. This means that the computer cannot be used while automated printing is occurring.
Right now the program's only saving grace is that it allows the user to be ignorant of the job settings so that all the user has to do is indicate an item number and quantity and walk away (hoping nothing changes the focus and derails SendKeys - but we know that kind of thing never happens in XP :P )

Child report with Download and back option

Hi,
i created a parent report1 and navigating to the child report2. in my parent report1 i see the download, refresh and print options as i enable them by the report links option.
when coming to the child report2 i am not finding them. how can i add them? please help!!!
Thanks,
Mani.

hi Mani,
I am able to see download and return buttons .Using navigate option,i drilled to child report
and enabled download and refresh buttons using report links
parent report : http://img214.imageshack.us/img214/1663/parentreport.jpg
child report : http://img444.imageshack.us/img444/1061/childreport.jpg
Are you looking for the same?
Else use , GOURL http://oraclebizint.wordpress.com/2007/07/30/customizing-obi-ee-%E2%80%93-go-url-parameters/
thanks,
saichand.v

PO output with mail, fax and print

I have created a PO with message type medium 5 (i.e. External send).
Now I go inside 'Communication method' and I can see communication strategy field, I select EML there (i.e EMAIL, FAX, PRINT).
Now after saving PO is getting mailed and also fax is working, but it is not printing out.
1. Is there any separate settings required for print out?
If I select medium as print out then print is working.
Please advice.
Thanks

Can you please explain more please?
1. Is this possible for PO output?
2. I have Email,Fax and print option, then if email goes then other two will not work?
3.Where the print will come, is this the printer mentioned in the communication method?
4.Where can I get the configuration steps for this?
Please advice.

Develop a form and print program using VBAP, VBAK, MRKT.

I have 2 tables VBAK [fields: VBELN, ERDAT, ERNAM, AUDAT, VBTYP, VKORG] and VBAP [Fields: POSNR, MATNR, CHARG, WAERK] and In output(form) i need the following fields,
Output table:
-VBELN
-ERDAT
-VKORG
-POSNR
-MATNR
-MAKTX <- this field is from table MAKT. (I need the Material descriptions too for all the materials.)
Form Layout should have Header, Logo (SAP ENJOY), Main, Footer.
Problem is that i need footer only after the End of Complete data in Main Window, thats is footer should be placed only in last window. How should i do that ?
Logic which i thot to make the print program is : First declare an internal table itab1 with VBAP, VBAP using the above fields from two tables and fetch the product based on matnr.
declare one internal table itab2 and select the records from the table makt by checking the condition itab1 is not initial.
sample code.
IF ITAB1 IS NOT INITIAL.
SELECT FIELD LIST FROM MAKT INTO TABLE ITAB2 WHERE MATNR EQ ITAB1-MATNR.
ENDIF.
hope this shuld work. ?????

Hi
see the sample script program and do accordingly
*& Report ZTEST12121
*& SAPScripts Example 1
REPORT ztest12121.
*DATABASE TABLES
TABLES: ekko,ekpo,lfa1.
*INTERNAL TABLES AND STRUCTURES
DATA i_ekko LIKE ekko.
DATA i_ekpo LIKE ekpo OCCURS 0 WITH HEADER LINE.
DATA i_lfa1 LIKE lfa1.
*PARAMETERS
PARAMETERS: p_ebeln LIKE ekko-ebeln.
*VARIABLES
DATA MAT TYPE STRING VALUE 'MAT NO'.
DATA iTe TYPE STRING VALUE 'ITEM NO'.
DATA QTY TYPE STRING VALUE 'QTY'.
DATA UOM TYPE STRING VALUE 'UOM'.
DATA NET TYPE STRING VALUE 'NET PRICE'.
Data var type integer value 0.
*DATABASE SELECTS
*Header data
SELECT SINGLE * FROM ekko INTO i_ekko WHERE ekko~ebeln = p_ebeln.
IF sy-subrc = 0.
*Item Data
SELECT * FROM ekpo INTO TABLE i_ekpo WHERE ekpo~ebeln = p_ebeln.
IF sy-subrc NE 0.
    WRITE 'PURCHASE DOCUMENT ITEM DATA ERROR'.
ELSE.
*Vendor Details
    SELECT SINGLE * FROM lfa1 INTO i_lfa1 WHERE lfa1~lifnr = i_ekko-lifnr.
    IF sy-subrc NE 0.
      WRITE 'VENDOR DOCUMENT ITEM DATA ERROR'.
    ENDIF.
ENDIF.
ELSE.
WRITE 'THIS PURCHASE DOCUMENT NUMBER DOESNOT EXISTS'.
ENDIF.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION                       = 'TX'
ARCHIVE_INDEX                     =
ARCHIVE_PARAMS                    =
DEVICE                            = 'PRINTER'
DIALOG                            = 'X'
    form                              = 'ZSCRIPT_1'
    language                          = sy-langu
OPTIONS                           =
MAIL_SENDER                       =
MAIL_RECIPIENT                    =
MAIL_APPL_OBJECT                  =
RAW_DATA_INTERFACE                = '*'
SPONUMIV                          =
IMPORTING
LANGUAGE                          =
NEW_ARCHIVE_PARAMS                =
RESULT                            =
EXCEPTIONS
CANCELED                          = 1
DEVICE                            = 2
FORM                              = 3
OPTIONS                           = 4
UNCLOSED                          = 5
MAIL_OPTIONS                      = 6
ARCHIVE_ERROR                     = 7
INVALID_FAX_NUMBER                = 8
MORE_PARAMS_NEEDED_IN_BATCH       = 9
SPOOL_ERROR                       = 10
CODEPAGE                          = 11
OTHERS                            = 12
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'OFFICEAD'
   FUNCTION                       = 'SET'
   TYPE                           = 'BODY'
   WINDOW                         = 'OFFICEAD'
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'PODET'
   FUNCTION                       = 'SET'
   TYPE                           = 'BODY'
   WINDOW                         = 'PODET'
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'TOP'
   FUNCTION                       = 'SET'
   TYPE                           = 'TOP'
   WINDOW                         = 'MAIN'
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT I_EKPO.
var = i_ekpo-netpr * i_ekpo-menge.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'BODY'
   FUNCTION                       = 'SET'
   TYPE                           = 'BODY'
   WINDOW                         = 'MAIN'
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT                         =
RDI_RESULT                     =
TABLES
OTFDATA                        =
EXCEPTIONS
UNOPENED                       = 1
BAD_PAGEFORMAT_FOR_PRINT       = 2
SEND_ERROR                     = 3
SPOOL_ERROR                    = 4
CODEPAGE                       = 5
OTHERS                         = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Structure of a print program
OPEN_FORM function
CLOSE_FORM function
WRITE_FORM
START_FORM function
END_FORM function
CONTROL_FORM function
The print program is used to print forms. The program retieves the necesary data from datbase tables, defines the order of in which text elements are printed, chooses a form for printing and selects an output device and print options.
Function modules in a printprogram:
When you print a form you must used the staments OPEN_FORM and CLOSE_FORM. To combine forms into a single spool request use START_FORM and END_FORM.
To print textelements in a form use WRITE_FORM. The order in which the textelements are printed, is determined by the order of the WRITE_FORM statements. Note: for printing lines in the body, you can also use the WRITE_FORM_LINES function module.
To transfer control command to a form use CONTROL_FORM.
Structure of a print program
Read data
Tables: xxx.
SELECT *
FROM xxx.
Open form printing - Must be called before working with any of the other form function modules.
Must be ended with function module CLOSE FORM
call function 'OPEN_FORM'.....
To begin several indentical forms containing different data within a single spool request, begin each form using START_FORM, and end it using END_FORM
call funtion 'START_FORM'.....
Write text elements to a window of the form
call function 'WRITE_FORM'.....
Ends spool request started with START_FORM
call funtion 'END_FORM'.....
Closes form printing
call function 'CLOSE_FORM'...
OPEN_FORM function
Syntax:
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
DIALOG = 'X'
FORM = ' '
LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
FORM Name of the form
DEVICE PRINTER : Print output using spool
TELEFAX: Fax output
SCREEN: Output to screen
OPTIONS Used to control attrubutes for printing or faxing (Number of copies, immediate output....
The input for the parameter is structure ITCPO.
CLOSE_FORM function
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Paramerters:
RESULT Returns status information and print/fax parameters after the form has been printed. RESULT is of structure ITCPP.
WRITE_FORM function
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = ' '
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
ELEMENT Specifies which textelement is printed
WINDOW Specifies which window is printed
TYPE Specifies the output area of the main window. This can be:
TOP - Used for headers
BODY
BOTTOM - Used for footers
FUNCTION Specifies whether text is to be appended, replaced or added
Example of how to use the WRITE_FORM function module together with a script.
Form layout of the MAIN window
/E INTRODUCTION
Dear Customer
/E ITEM_HEADER
IH Carrier, Departure
/E ITEM_LINE
IL &SBOOK-CARRID&, &SPFLI-DEPTIME&
/E CLOSING_REMARK
The print program
Writing INTRODUCTION
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'INTRODUCTION'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Writing ITEM_HEADER
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Set ITEM_HEADER into TOP area of main window for subsequent pages
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'SET'
TYPE = 'TOP'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Write ITEM_LINE
LOOP AT .....
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_LINE'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8.
ENDLOOP.
Delete ITEM_HEADER from TOP area of main window
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'DELETE'
TYPE = 'TOP'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Print CLOSING_REMARK
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'CLOSING_REMARK'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
START_FORM function
CALL FUNCTION 'START_FORM'
EXPORTING
ARCHIVE_INDEX =
FORM = ' '
LANGUAGE = ' '
STARTPAGE = ' '
PROGRAM = ' '
MAIL_APPL_OBJECT =
IMPORTING
LANGUAGE =
EXCEPTIONS
FORM = 1
FORMAT = 2
UNENDED = 3
UNOPENED = 4
UNUSED = 5
SPOOL_ERROR = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END_FORM function
CALL FUNCTION 'END_FORM'
IMPORTING
RESULT =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SPOOL_ERROR = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONTROL_FORM function
The CONTROL_FORM function module alows you to create SapScript control statements from within an APAB program.
Syntax:
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command =
EXCEPTIONS
UNOPENED = 1
UNSTARTED = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Example:
Protecting the text element ITEM_LINE
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'PROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
TEXELEMENT = 'ITEM_LINE'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'ENDPROTECT'.
Regards
Anji

Graph legend and print options

Similar Messages

Maybe you are looking for