GRAPH_RECEIVE with Stat_5 (new load) ??

Dear ABAP Guru's,
as newbie I'm try to code a chart with differnd nodes. So my idea is, to refresh the complete content after an input command. The normal examples are all are updates in the grafic-content (stat_4).
When I build the refresh content and set the variable to stat_5, I get following Message:
"Teilbildnummer nicht gültig (840, $CHARS, 1)"
The background for my programm is, that in the time where the grafik is shown, the data behind can be modified from other users. So the grafik wil after every cmd show the actual data.
regards
Jens

Hi Nile,
Is that by any chance that the application is sending messages more than 30 concurrent connections.
Can you try altering the value to little bit higher value as we can increase this value from 20 to 100 as this less number of values are not going to crash the server due to smtp load.
Just remember that modifying these value applies to ALL connections.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Similar Messages

I have an older Ipod shuffle with many songs loaded on it. How can I transfer these songs to a new computer since the old computer is no longer available

I have an oder Ipod shuffle with many songs loaded on it. How can I transfer ths songs to a new computer since the old computer is no longer available?

I had the same problem with my iPad, i couldn't get the newer version of itunes because the computer was too old and my iPad couldnt sync with the old itunes. I got a PC from school a few months later so that solved the problem for me. Unfortunately i don't think there would be a program to put your music on your iPod, iTunes should be the only way to transfer files to Apple devices. What operating system are you running and what version of it is it?

I have a brand new macbook with microsoft office loaded. I set outlook as the default mail. i would rather go back to mac mail but can't figure out how to do it. any ideas?

I have a brand new macbook with microsoft office loaded. I set outlook as the default mail. i would rather go back to mac mail but can't figure out how to do it. any ideas?
Thanks for any help
Lou

I have a similar problem: I switched from mac mail to Outlook 2011 as the default client, and want to switch back. Mailto links (eg from browser etc) default to Mail. However, when I try to email a Word document as an attachment, it continues to open Outlook. Outlook has a button in its prefs for making it the default client, but I don't see a way to turn this pref off in either Outlook or in Word.

My ipod touch broke then replaced it with a new one. I already dloaded iOS5 on the old one. When I connected my new unit it says it won't load the previous back because the new one is not up to date... Do I really have to download iOS5 again?

My ipod touch broke then replaced it with a new one. I already dloaded iOS5 on the old one. When I connected my new unit it says it won't load the previous back because the new one is not up to date... Do I really have to download iOS5 again?

Yes, you have to update the iPod in order to retore from backup. The iOS on the "new" has to be aequal to r greater than on the iPod from which the backup was made. The iOS downloads are unique to an iDevice and model (the one for a 3G iPod will not work for a 4G iPod).

Lost a 2 hard drives, have 7 k photos on a touch that I need to load on IMAC with a new hard drive, how do I do it. Just never went from a Touch to iMac. I have the cable hooked up and then what, I don't want to mess up,my last chance to save 7k pics!

Lost my hard drive and also an Ipad, but have 7 k photos on a Touch that I need to load on fixed IMAC with a new hard drive, how do I do it. (There were more photos than the 7k, but they were saved on other drives, thank goodness). 7K pohotos on the Touch are no where else, must be saved! Just never went from a Touch to iMac. I have the cable hooked up and then what, I don't want to mess up,my last chance to save 7k pics! New Aperture and IPhoto on IMAC with no other photos loaded on the new hard drive yet.

I'd ask in the iTouch forum where there are more iTouch users there than here and they should know how to off load the photos. It might take a 3rd party app.
OT

How to load a Numbers folder on my iMac to iCloud so it can sync with my new iPad

How to load a Numbers folder on my iMac (os x Yosemite v 10.10.2) to iCloud so it can sync with my new iPad (8.2)

Welcome to Apple Support Communities
If you have Numbers installed on your iPad, first go to System Preferences -> iCloud, and make sure that iCloud Drive is enabled.
If so, open a Finder window and choose iCloud Drive in the left sidebar, so you will see a Numbers folder. Just open it and put your Numbers documents there, so they will be synced between your iMac and your iPad (providing that you already have Numbers on your Mac).

How do I share a hard drive with the new iMac to load a disk from macbook pro

How do I share a hard drive with the new iMac to load a disk from macbook pro. I want to install office for Mac from a disk but dont know how to share har drive from macpro
thanks

The new iMac's don' t have DVD drives however almost all have a disk drive. The easiest method of installing MS Office for Mac on your new iMac is to download it from Microsoft and then input the code you received when you purchased your original license. Otherwise you can use the DVD drive on your MBP to install on your iMac, that feature is called Remote Disc. Instructions for Remote Disc can be found at:http://support.apple.com/kb/ht5287

HT204053 I loaded the new iTunes (11.0.0.163) on my computer and also just purchased a new iPhone 5. Prior to loading the NEW iTunes, I was able to sync with my new iPhone 5. After I loaded the new iTunes, I now get an error message: 0xE8000084. What's

I loaded the new iTunes (11.0.0.163) on my computer and also just purchased a new iPhone 5. Prior to loading the NEW iTunes, I was able to sync with my new iPhone 5. After I loaded the new iTunes, I now get an error message: 0xE8000084. What's up?
Also, it says the iPhone 5 is not registered to my Apple ID.

See if the troubleshooting for 0xE error codes on this page helps : http://support.apple.com/kb/TS3221

Trial version load file error: ... created with a newer version of Adobe After Effects

I downloaded and installed the trial version of Adobe After Effects 6.0 last night and worked on a project for quite some time. This morning, when I tried to open the project, it gave me: After Effects Error: this file was created with a newer version of After Effects [3.0 (unknown)] -- time to upgrade your application.
The message is annoying. This means that if anyone send me an After Effects File from future versions, I cannot load them. Even Microsoft has converters for backwards compatibility
It is costing me time to evaluate the product, and lowering my opinion of it since it obviously has bugs

Ah, I see. So you are using 6.0, not CS6? Yes, in that case things are just as they are - AE is not forward compatible. Only CS5.5 and CS6 allow to save one version back (that is CS5 and CS5.5, respectively), but beyond that AE never offered this feature. anyway, AE 6.0 is hopelessly outdated. It doesn't even work on contemporary operating systems nor does it work properly with current versions of Quicktime and just the same it doesn't support any modern media formats, so that's like trying to fly to the moon with a WW I. airplane... and to make matters worse - AE 6.0 was one of the most bug-ridden versions of the program in the first place.
Mylenium

With my new update I can not load my verizon yahoo e-mail, I can load with Internet Explorer, how can I get my Firefox to open my email

with my new Firefox update I can now not load my verizon yahoo e-mail, I can load my email with Internet Explorer but not Firefox,
how can I fix this

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

OCI bowser generates new session with each page load

Here is a summary of my problem:
I am trying to implement the SAP Open Catalog Interface (OCI) with our eCommerce software, but I am having issues with the Web browser that OCI uses.
Our eCommerce software utilizes the browser session id to identify the user. Our issues is that the OCI browser supplies a new session id with each page load.
The weird part is that if I open a standard instance of IE, access the site, and then access the site though OCI the same session is shared by both the OCI browser and the IE browser. The OCI browser is now able to maintain the session ID as the user browses the site.
Thanks.

Thank you for your quick response.
I understand that session IDs are always unique, and should only last for as long as the instance of the browser is open.
What I have seen happen is that the session ID will get recreated with each page load with in a single instance of the OCI browser.
When the site is opened in OCI it logs the user in, and then redirects them to the homepage. The problem is that the load of the login page, and the load of the homepage have different session IDs. If the user then clicks on a link on the homepage that page load will again have a different page load. This causes the eCommerce system to see them as separate users.
As I described when I open an instance of IE first it seems to work. This leads me to believe that the OCI browser can read the cookie information, but can't write or create.
I am trying to figure out why the OCI browser keeps generating new Session IDs.

Just upgraded to firefox 4 and websites are now taking ages to load, there were no problems when I downloaded the upgrade. Is there a fault with the new version of firefox?

Just upgraded to firefox 4 and websites are now taking ages to load, there were no problems when I downloaded the upgrade. Is there a fault with the new version of firefox?

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

Learning AS3, new Loader(); with loop

I'm still trying to learn Action Script 3 and I've watched a few videos and read some tutorials. I've currently got this script (see below). What I'm trying to do is make it so I can load several images from a loop. I've played with a few different things, but I'm not completely understanding how the listener works as it relates to the loader. It seems when I try and add a second image, it only enters the onComplete function 1 time, therefor i only get one Image loaded. As a side note, I've also been trying to dynamically change the x and y position, but I'm not sure how to modify a global variable from within that function, or better yet, pass in the arguements during the eventListener call to onComplete.
I'm hoping someone could give me some sample code or a better tutorial that might give me a better look at what I'm trying to do.
package {
    import flash.display.MovieClip;
    import flash.display.Loader;
    import flash.events.*;
    import flash.net.URLRequest;
    public class Main extends MovieClip {
        public function Main() {
            var imageLoader:Loader = new Loader();
            var theURL:String = "images/178006.jpg";
            var imageRequest = new URLRequest(theURL);
            imageLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete);
            imageLoader.load(imageRequest);
            function onComplete(evt:Event) {
                addChild(imageLoader.content);
Thanks in advance,
Dave

Don't know of any tutorials, but have a look at this. It doesn't use a loop, but rather relies on the current load operation completing before starting the next.
package
import flash.display.MovieClip;
import flash.display.Loader;
import flash.events.*;
import flash.net.URLRequest;
public class Main extends MovieClip {
var urls:Array=null;
var imageLoader:Loader=null;
public function Main()
   urls= ["images/178006.jpg", "images/178007.jpg", "images/178008.jpg"];
   imageLoader = new Loader();
   imageLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, onImageLoadComplete);
   loadNextImage();
function loadNextImage()
   if (urls == null || urls.length == 0) { return; }
   var theURL:String = urls.shift();
   var imageRequest = new URLRequest(theURL);
   imageLoader.load(imageRequest);
function onImageLoadComplete(evt:Event)
   var dispo:DisplayObject = imageLoader.content;
   imageLoader.unload();
   addChild(dispo);
   loadNextImage()

I am traveling with a new computer and do not have my software (Acrobat Pro) to load but hoped I could do so with my serial number

I am traveling with a new computer and do not have my software (Acrobat Pro) to load but hoped I could do so with my serial number

Hey,
Do you have access to the internet?
You might visit Adobe website and download Acrobat pro on your system.
Then, you can use your serial number for activating the software.
Regards,
Anubha

I have 2 purchased ringtones in iTunes that will not load onto my iPhone4 with the new 5.0OS.

I have 2 purchased ringtones in iTunes that will not load onto my iPhone4 with the new 5.0OS. Is there a fix?

Message to use a new version of IE
There is a problem with IE10+ in that it is mistakenly seen as being IE1. To get around this either use a different browser or use compatibility view (http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-10)

GRAPH_RECEIVE with Stat_5 (new load) ??

Similar Messages

Maybe you are looking for