Graph scales won't update before being appended to report.

I have a subvi that plots data to 2 xy graphs, autoscales the data using property nodes, and appends the image to a report using append front panel image to report.vi. Everything works fine except the scales are not being autoscaled. I'm using LV 7 with Windows XP Professional or Windows 2000. Any suggestions? Thanks.

Take a look at the screen shot. I have tried your second suggestion and still it doesn't work. I should note that this subvi is part of a stand alone executable application. Also, I have found that if I configure the subvi to open when called, programmatically minimize it, and close it when it's finished; the subvi will work. Any insight as to why? Secondly, what does synchronize display do? Thanks
Attachments:
lv.bmp ‏1490 KB

Similar Messages

After updating to yosemite aperture, pages, keynote and numbers won't open. tried to update via app store and it says apps not authorised on this account. apps were bought with the mac and have never missed an update before so why now?

afyer updating to yosemite aperture, pages, numbers and keynote won't open
i have tried updating them via app store only be told they aren't authorised on this account, they were bought and installed with this mac and there has never been a problem updating before so why now?
this is the fourth time i have had to type this question out. what a terrible lay out for a support section!

this is the fourth time i have had to type this question out. what a terrible lay out for a support section!
You aren't likely to get an answer with that type of attitude. BTW, you are not contacting Apple on these forums. We are all volunteer end users just like you. If you want support, then call AppleCare and you can get one-on-one assistance.

Is it best to set waveform graph scale properties before or after sending new data to the graph?

Hi I'm wondering when is the best time to update waveform graph scale properties.
I am sampling data every 15 minutes for 192 samples, i.e. 48 hours. I want to plot these samples with the x scale in absolute time mode so that x scale maximum is the current time and x scale minimum is x max minus 48 hours (172800 seconds). I also want the intermediate scale markers to be 6 hours apart and to be multiples of whole 6 hours. e.g. at 06:00, 12:00, 18:00. This works OK using property nodes but sometimes the intermediate markers are on the 6 hour multiples and sometimes they are at 6 hours after the min scale marker. e.g. 09:15, 15:15, 21:15. Is there a way of guaranteeing that the intermediate markers will be on the 6 hour multiples?
Thanks,
Neville
Solved!
Go to Solution.

Hi Bryan,
Thanks for your reply. I have discovered that I can achieve what I want by using an XY graph instead of a waveform graph. I want X max to be the current time and X min the be 48 hours earlier with intermediate scale markers on multiple of 6 hours. The XY graph in the attached VI does exactly that but I can't get the waveform graph to behave as I would like. Is there a way of getting the waveform graph to behave as I would like?
Thanks,
Neville
Attachments:
waveform graph x axis scale.vi ‏16 KB

TS3694 My iPad won't update software saying it can 't connect to the Internet which is not true as you can see from me being able to write this. there is no error code. It just says unable to verify, try again later. Any suggestions?

My iPad won't update iOS 7.0.4 software saying it is unable to verify because it can 't connect to the Internet and to try again later. It doesn't display an error message number. Obviously I can connect otherwise you wouldn't be reading this. Any suggestions? Many thanks for your help.

You didn't specify which way you are trying to update - using the Software Update setting on the iPad or by using iTunes. I will assume that you are using iTunes because the kb article that linkd you to here was the one about iTunes error codes.
Quit iTunes, reset your iPad, restart your computer and try again. Disable your firewall and antivirus software of you are using it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Podcast metadata and show information just won't update

The metadata and show information for my current podcast simply won't update on iTunes. Information such as author, category, subtitle won't up and as of this week the number of included episodes won't change no matter what changes we make from within our Wordpress site or directly to our feed. Can anyone spot what we might be doing wrong? Has anyone encountered this issue before?
We've were new and noteworthy in Comedy for two months, which was great... but we're not actually that funny!
Thanks a lot!
Feed: http://oddpodcast.com/feed/podcast
iTunes: https://itunes.apple.com/gb/podcast/the-odditorium/id961676664?mt=2&ign-mpt=uo%3 D4

In fact the Store is using the feed at http://feeds.feedburner.com/oddpodcast/yItF
This matches what's in the Store and when subscribing - the main Description on the Store page is drawn fro the 'itunes:summary' tag and matches it. The same ten episodes which are in this feed appear in the Store. The feed at the URL you quote has one further episode, earlier than the others at January 23rd, so its not being in the Feedburner feed may be something to do with the Feedburner settings limiting the number of episodes. Otherwise the feeds seem to be identical (I haven't checked them in detail) and match what's in the Store.
If something isn't matching your expectations please describe exactly what it is.

IPod Won't Update - Is iTunes 7 to blame?

I started having problems with my iPod's playback - skipping songs in a playlist and skipping to the next track before the end of the song - I then tried to add songs (and update calenders etc.) using iTunes 7 (having only just downloaded it) and then everything stopped working.
The iPod registered on the computer and in iTunes - the contents of the iPod appeared in ITunes too, but it refused to accept new songs - when I tried to add songs, iTunes said it was updating, but it froze on the second song and iTunes then crashed.
I have restored the iPod and reinstalled iTunes 7, but neither of them work - the iPod won't update and iTunes constantly crashes (particularly when playing and pausing songs). I tried downgrading to iTunes 6.0.5 - which works fine - but the iPod still would not update.
Are these problems due to iTunes 7 being rubbish or do I have a broken iPod?? Is there anything I can try??
I have also just realised my mistake in putting this question in the Fifth Generation iPod forum, as I don't have one. Apologies for that - I have an iPod with click wheel but I don't seem to be able to move the question!
Macbook Pro 2.0Ghz - 20Gb iPod with Click Wheel Mac OS X (10.4.7)

hi Jim!
Plug in my iPOD, and it says its updating, and I can see the new music on the iPOD from iTunes, but its NOT ON MY IPOD when I unplug and try and play.
sounds like a drive letter confusion on your PC. see:
http://docs.info.apple.com/article.html?artnum=93499
... although, of course, you don't actually
b care
about what we might say, or fixing it ...
love, b

Template "main.dwt" won't update template pages

Hi there,
I'm super new to dreamweaver and I'm having a problem at the minute with the template. I've got my pages, etc, but I need to apply my logo image in the header sector and also an anchor link at the bottom and top of the main content body. So, my biggest problem really is that when I click the line, which highlight's the header, and make it into a "New Editable Region" and name it, like, "banner_image" or whatever and put my banner in there, and then click "Save All"; nothing happens.
I mean, it's worked before but I don't understand why it won't update my other pages into editable regions so I can add the banner to all pages. I would've tried to add it in manually, but stupid me, I realised that the headers weren't editable, still.
And I can't even update anything on the template page, really. I was wondering if there was a solution to this maybe?
I'm using CS4 at college, but I've been coming home at working at it on my laptop (both macs) with CS6.
Please help, I spent around five hours this morning in class pulling out my hair because my div tags were all over the shop. Boo!
Thanks,
Andrew!

Hi Nancy,
Thanks for the quick respones! Honestly, I only used them because we were told to by our lecturer, which now I'm second guessing. Just for clarification, you would use Editable Regions on the child pages (i.e. not the template)? Here's the html
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />

<title>Untitled Document</title>



<link href="../oneColLiqCtrHdr.css" rel="stylesheet" type="text/css" />
<style type="text/css">

</style>
</head>
<body bgcolor="#ccffff" text="#3366ff" class="oneColLiqCtrHdr">
<div id="container">
<div id="header">
<h1><img src="../Images/Banner Image/bannerimage.png" width="754" height="100" alt="banner_logo_snow_mountain" /></h1>
</div>
<div id="nav">
<div align="center">
<table width="509" height="46" border="1">
<tr bgcolor="#FFFFFF">
<td width="551"><a href="../index.html">Homepage</a> | <a href="../packages.html">Packages</a> | <a href="../ski_centers.html">Ski Centers</a> | <a href="../about_us.html">About Us</a> | <a href="../contact_us.html">Contact Us</a></td>
</tr>
</table>
</div>
</div>

<div id="mainContent">
<h1> Main Content </h1>
<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Praesent aliquam, justo convallis luctus rutrum, erat nulla fermentum diam, at nonummy quam ante ac quam. Maecenas urna purus, fermentum id, molestie in, commodo porttitor, felis. Nam blandit quam ut lacus. Quisque ornare risus quis ligula. Phasellus tristique purus a augue condimentum adipiscing. Aenean sagittis. Etiam leo pede, rhoncus venenatis, tristique in, vulputate at, odio. Donec et ipsum et sapien vehicula nonummy. Suspendisse potenti. Fusce varius urna id quam. Sed neque mi, varius eget, tincidunt nec, suscipit id, libero. In eget purus. Vestibulum ut nisl. Donec eu mi sed turpis feugiat feugiat. Integer turpis arcu, pellentesque eget, cursus et, fermentum ut, sapien. Fusce metus mi, eleifend sollicitudin, molestie id, varius et, nibh. Donec nec libero.</p>
<h2>H2 level heading </h2>
<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Praesent aliquam, justo convallis luctus rutrum, erat nulla fermentum diam, at nonummy quam ante ac quam. Maecenas urna purus, fermentum id, molestie in, commodo porttitor, felis. Nam blandit quam ut lacus. Quisque ornare risus quis ligula. Phasellus tristique purus a augue condimentum adipiscing. Aenean sagittis. Etiam leo pede, rhoncus venenatis, tristique in, vulputate at, odio.</p>

</div>

<div id="footer"><p></p><p></p>
<p>Andrew Waddell © 2014</p>
</div>
</div>
</body>
</html>
This is the html that is being used on my template, I tried to add the banner and save but that didn't do anything. I don't really know what I've done, do you see anything that might be stopping me from advancing?

IMac display issues: black icons and folders, doubled up files in finder windows, programs won't update

HELP!
I'm hoping someone can help with my iMac 27" purchased in 2010. From a previous discussion I started a year ago, I have had virtually nothing but trouble with it. After the internal hard drive crashing, I was able to install OS X on an external drive and used it for a good 8 months to drive my iMac and I took it to an expert who has replaced it with a 3tb HDD, but at some point the display has gone crazy. I am not certain if it is hardware, i.e. graphics card or video but I'll describe the symptoms and add some pics to see if anyone has seen this before and knows what the problem may be.
1.     90% of the screen was covered with white with just a portion of the desktop showing through.
        (This happened when I tried to reinstall OS X on the old HDD and the new one, but didn't happen when using OS X install disc)
2.     Files, folders, photos and some icons on the dock go black
3.     Files and photos double up when in Finder. When I'm viewing photos, it shows them but all the previous panes and the photos are jumbled behind the
        photos.
4.     Anything I open in Preview is completely black, but ColourSync Utility opens everything fine.
5.     Programs won't update. They will download onto my iMac but won't update. Some say, because I don't have OS X 10.6.8 others just won't open.
        Including Google Chrome, opens with two tabs open but when I open a third tab the rainbow wheel just turns. Skype won't open just gives a failure
        report.
6.     10.6.8 Update Combo downloads but when I restart the screen is covered in white - as in 1. and I have to reinstall OS X 10.6.2 to get the screen to               clear but then all the above problems continue.
7.     Sometimes videos don't display in Youtube, or the entire page other than the video player is covered in rainbow lines.
8.     Some buttons are blacked out on selection pages, i.e. system preferences, or saving screens
9.     Photos opened in FB go upside down and flicker all over the page as my mouse runs over them.
10.   Photos won't upload into internet editing programs.
I can't find anyone who has had the same issue in all of the discussions I've looked at, but it sounds like I have a video problem, but I wondered if it might be a software problem with flash or something. Or I have something malicious on my computer.
I also have an iphone 5 that faulted with the iTunes and USB icons and won't fix after trying one of those R-Sims, and I wondered if somewhere along the line it may have even had a virus/trojan/malware that has infected my external drive and then my internal drive. A reason I have thought that is because I have used my daughter's MacPro laptop and plugged in my external drive and I noticed the windows in hers were starting to do the same thing.
And on top of all that, my fans didn't work for over a year and I had to place an external fan at the back of the computer or it would overheat and shut down, but after resetting the SMU it started working again, but it is very noisy. I have tried to download SMC Fan Control and although it downloads to the HDD, it won't open.
Sorry its such a long post, I do hope with all of this information someone can help me.
Thanks so much.

HI and Welcome to Apple Discussions...
*Soon after, I installed Quake Wars, L4D 1, 2, Mass Effect 2, Need For Speed: Undercover, Mozilla Firefox and *Sophos Enterprise AV*. Approximately a week after installation, I began to experience malfunctions varying greatly*
Macs get grumpy when running anti virus software. Disable or completely uninstall Sophos A/V and see if that makes a difference. A/V software on a Mac will slow the drive down more and more as time goes on.
Also, check the vendor sites for each 3rd party software you installed to make sure they are compatible with 10.6.x
The "hard reboots" are a result of the system freezing due to incompatible or outdated software.
Carolyn
Message was edited by: Carolyn Samit

My I phone 5 won't update or download apps

I have got 3 handsets all
I phone 5
Two of the phones have no problems both 16 gig
My Apple ID is the same on all my phones
The I phone 5 64 gig won't let me update my apps or download
Any new apps
I have changed my Apple ID
I have changed my e mail address
I have changed my password
I have the latest software update I s o 7.0.6 installed
Every-time I go to App Store & try update single or collective updates
The phone will just keep popping up with Apple ID & apple password
It won't update & it won't let me download
The other two handsets work fine & the details are the same
I have changed the I phone 5 twice both times like for like & still problem is they're
Please can anyone advise or help
Very much appreciated

If you are using the same apple id on other devices and each of the other devices are updating the same apps sucessfully then you have an issue going on with the device being what's known as being a bit 'glitchy' What I would suggest you do is first to shut down the device completely by simply pressing on the sleep wake button, (power button on the top) for a period of 5-6 seconds untill you get the message to slide bar to shut down. Once the device is shut down and the wheel has stopped spinning, you are then free to restart the device.
Once the device is restarted then please go to settings>itunes and app store Once at this area of settings you can then click on the apple id is showing there you then can click on the apple id going to where it reads sign out, Once you've signed out go right back to that same area and sign back in with the same apple id.
What this is doing is simply logging you out and then back in with the same device.
Good luck Friend.

My Apple TV won't update and I can't sign into iTunes

I have the second generation Apple TV which is due an upgrade of software but it won't update. I kept getting a message saying that it wouldn't work. It also won't sign me in to iTunes and Netflix never works. Not sure of this has anything to do with not being able to upgrade. Can someone help?

We had this problem and a restart fixed it.

HT6012 I had uninstalled iMovie 10 after it was updated and decided to reinstall it but it won't update, iMovie 10 update is stuck at installed in my App Store account. How do I get it the update to revert to uninstalled so I can re-update iMovie 10 to 1

I had uninstalled iMovie 10 after it was updated and decided to reinstall it but it won't update, iMovie 10 update is stuck at installed in my App Store account. How do I get it the update to revert to uninstalled so I can re-update iMovie 10 to 10.0.1? iMovie 9.0.9 (iLife 11) is still installed and working.

What in particular didn't you like about Firefox 6?
You can undo a lot of changes, either via changing settings or prefs on the <b>about:config</b> page or via extensions.
*https://support.mozilla.com/kb/common-questions-after-updating-firefox
Do a clean reinstall of the version that you want to use.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

Tags won't update

Hello,
I'm a DJ and I use Traktor as my DJ software and iTunes to manage my MP3 collection.
Sometimes when I update a genre i Traktor, iTunes won't update the tag. Sometimes it does. I checked the file in another software, and the change is there, but not in iTunes.
I downloaded a script called "Refresh", but it won't work. I removed the track and re:added it. Same problem.
This happens every 20 MP3s or so, but it's a major problem because I use Smart Playlists and want that genre change to be updated.
Please help me with this problem!
Raffe Bergwall
<Edited by Host>

I know I could always rip them back to my computer and then use a seperate program, but I'd like to fix this problem because it's easier in iTunes
Any reason you do not keep your music in iTunes and update it there?
What will you do when your iPod crashes (it will) and you need to Restore it, therefore deleting everything on it?
I used to be able to update genre tags, however it won't allow me
No idea. Can't say I have seen this before.

I have firefox16.0 and would like to update to the most recent version (19). But my Firefox won't update

Hi there
I've got windows vista on my computer, and am using Firefox 16.0. Have been for a while now, ever since it was installed a year ago or so.
The thing is, Firefox won't update to the latest version (currently version 19 I believe), neither automatically or manually. I've tried everything, including using the "help" function. The window only says it's Firefox 16.0, but when I click on "update", the page just refresh and that's it, nothing else happens. I've checked all other settings, and it looks like all the right boxes are ticked, including "update Firefox automatically".
Coming to think about it, on my wife's computer, we are always told about new updates for Firefox. On this one, no update alert of any sorts since it was installed a while ago (and again, all the right boxes being ticked)
Please can anybody help? Should i reinstall Firefox altogether?
Thanks for your help
Frankie

see this:
[[Update Firefox to the latest version|Update Firefox to the latest version]]

My 1st Gen won't update to iOS 3? :(

So, I've been trying to update my 1st Gen to the iOS 3 so I can use apps, and for whatever reason my iTunes not only deleted everything from my iPod, but won't update to the new iOS. So now I have an iPod Touch that doesn't work, and I'm out 5 bucks for the iOS that won't even work because of an 'unknown error.' Has anyone heard of this or know how to fix it... or why it's not working? Anything?
Oh, and by the way, I have the latest version of iTunes and everything like that, and I followed all the support steps on Apple's website.
Message was edited by: Kikuitadaki

I don't know what I did since I did everything I already tried before, but I fixed it. So nevermind. Sorry for the pointless thread.

Ipod Tough 4th Generation Apps Won't Update

Hello,
Just got the message to update some apps on my ipod. Now it won't update to IOS 7, which is fine, but I've never had a problem with it not being able to update the apps. It says it's no longer compatible. I'm assuming that this is because the new apps are for IOS 7.
The find my phone is pretty important and I'm wondering if the fact that it won't update will hinder it from working properly.
Also, the garageband & pages will not update as well, and I find it very handy to use it to put down ideas on my ipod and then transfer it to my computer. Will the fact that it won't update cause compatibility issues with the computer as well, since I just updated it to Mavericks?
Is any body else having this problem?
Thank you for your responses.

Go to settings>icloud>storage and back up>back up
after that download the ipsw corresponding to your ipod. usoing link below
http://osxdaily.com/2013/09/18/ios-7-ipsw-direct-download-links/
After download hold the ipods home and power button for 15 seconds. itunes will detect an ipod in recovery mode. hold the option key and click restore. finder will pop up and find the ipsw via search and click on it and choose it.
this should work

Graph scales won't update before being appended to report.

Similar Messages

Maybe you are looking for