Graph Title not consistent with Planning Book Name

Hi Gurus,
We are facing a strange issue in APO DP .
Whenever we are opening a dataview with graph, graph title is not in synch with the Planning book name.
This is happening only for certain users(Not all).
Please advise if we need to adjust any user specific settings.
Thanks & Regards,
Rahul

Hi Rahul,
Open your planning book, and load the data view
Once it is done, display the graphic view
Then click on Switch graphic settings.  Once it is done,
on the RHS it will display the graphic settings.
Goto Value axis  >  Title , under caption ---> change
the title and then press Save Graphic settings
Regards
R. Senthil Mareeswaran.

Similar Messages

  • Ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

    ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

    No on the book title, no problem there.
    The issue is: my book pages appear as on white paper, no background that resembles a open book and also no option to change fonts. The book was created in iBooks author, there was a problem going with the "Publish" menu route so I was instructed my Apple to "export" the file and submit that. I think that's the problem after reading that iBooks author is a hybrid epub file.
    Thanks for getting back to me.

  • APIC calibration not consistent with PM-Timer

    Hi ArchUsers!!!
    I'm doing some diagnostic to my laptop to make it work well and 'cause I like to solve/correct bad things.
    Let's start from this error
    # journalctl -b
    APIC calibration not consistent with PM-Timer: 119ms instead of 100ms
    # lscpu
    Architecture: x86_64
    CPU op-mode(s): 32-bit, 64-bit
    Byte Order: Little Endian
    CPU(s): 2
    On-line CPU(s) list: 0,1
    Thread(s) per core: 1
    Core(s) per socket: 2
    Socket(s): 1
    NUMA node(s): 1
    Vendor ID: GenuineIntel
    CPU family: 6
    Model: 15
    Model name: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz
    Stepping: 13
    CPU MHz: 800.000
    CPU max MHz: 2000,0000
    CPU min MHz: 800,0000
    BogoMIPS: 3991.35
    L1d cache: 32K
    L1i cache: 32K
    L2 cache: 2048K
    NUMA node0 CPU(s): 0,1
    Tell me if you need some other infos about the laptop!
    Last edited by addamm (2014-01-03 11:42:49)

    Hi ArchUsers!!!
    I'm doing some diagnostic to my laptop to make it work well and 'cause I like to solve/correct bad things.
    Let's start from this error
    # journalctl -b
    APIC calibration not consistent with PM-Timer: 119ms instead of 100ms
    # lscpu
    Architecture: x86_64
    CPU op-mode(s): 32-bit, 64-bit
    Byte Order: Little Endian
    CPU(s): 2
    On-line CPU(s) list: 0,1
    Thread(s) per core: 1
    Core(s) per socket: 2
    Socket(s): 1
    NUMA node(s): 1
    Vendor ID: GenuineIntel
    CPU family: 6
    Model: 15
    Model name: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz
    Stepping: 13
    CPU MHz: 800.000
    CPU max MHz: 2000,0000
    CPU min MHz: 800,0000
    BogoMIPS: 3991.35
    L1d cache: 32K
    L1i cache: 32K
    L2 cache: 2048K
    NUMA node0 CPU(s): 0,1
    Tell me if you need some other infos about the laptop!
    Last edited by addamm (2014-01-03 11:42:49)

  • After REFRESH the cached object is not consistent with the database table

    After REFRESH, the cached object is not consistent with the database table. Why?
    I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
    in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
    Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
    JDeveloper.
    How to make the JDeveloper's offline tables to be synchronized with the underling database tables?

    qkc,
    Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
    John

  • G/L Account currency is not consistent  with G/L Interim Account currency

    Hello
    A few days ago I was  printing checks and suddenly an error occurs
    it says something like..."Another user is accessing the same account"
    In the reserch   I found help in SAP Portal, where I showed how to unlock this part
    This I did in Administration->Set up-> Banking-> House Bank accounts
    At the end is a column that says BLOCK PRINTING, always locked, but when the error occurs is enabled for the account that has been affected, and a  super user must unlock by unchecking the check box.
    The problem is that the update that part I get an error message and I have not been able to unlock
    The error is
    G/L Account currency is not consistent  with G/L Interim Account currency [Message 60701-9]
    In this regard I have not found anything to help me resolve this error and the printing of checks is blocked
    I need your  help
    Regards.
    Yen

    Hi
    i found the problem,  we have an  accunt that is just visible  in  House bank accunt window when try to select an account in the column G/L intermin account,  but  that account is  not an active account ,  the descrpction says "Copy express transport account" i delete it in all the rowa and  finaly  we could update the window.
    Regards
    Yen

  • Balance of S_ALR_87012168 and S_ALR_87012167 is not consistent with FBL5N

    Dear all,
    Could you kindly let me what's the reason that cause S_ALR_87012168 and S_ALR_87012167 is not consistent with FBL5N.
    When view line item anlaysis the line item is the same with FBL5N, but in the first page of due / not due anlysi, the result is not the same?
    Thanks bnd Best Regards.
    CSY.

    Hello
    first thing you should do it is to run the programm SAPF190 if you don't activate NewLedger or TFC_COMPARE_VZ if new ledger is on.
    These programms will check the index of the data and compare the amount between index and BSEG/FAGLFLEXA table.
    Second point, do you check the analysis with all same option ?
    Best regards
    Philippe

  • Function module to read/write notes in the planning book

    Hi All,
    Can you guyz tell me the FMs to read / write NOTES in the planning book. Notes as in you can right click on a cell of PB and do display notes.
    win full points for the answer.
    Thanks - Chandan

    Check FM /SAPAPO/MSDP_NOTE_WRITE and Use of APO BAPIs page in SCM Wiki.
    Thanks,
    Somnath

  • "IP and router address not consistent with subnet mask"

    Hi all,
    i have one of the old Powermac G5's running os x 10.3.5 "Panther" with a dual 2.5ghz processor, 512mb or ram, 160 gig hd, and no wireless card. I've been trying to hook the computer up to my network via an Ethernet cable (I have a Linksys WRT54G series router).
    the problem is this: When I go through the Network utilities using the "assist me" option, select the LAN option, put in the necessary information (IP address, subnet mask, router address, and the dns host), and select continue, this message pops up:"IP and router address not consistent with subnet mask".
    What I've found is that no matter if the computer is plugged in with a cable to the Ethernet port the message comes up which is very unusual.
    Thanks in advance.

    Have you verified that you indeed have the proper subnet entered?
    Why don't you just let the Mac obtain its ip address from the router via DHCP?

  • Not happy with Mac book pro retina because of black screen problem.

    I am not happy with Mac book pro retina because of black screen problem. This screen failure appears after one year. I was fan of APPLE now I do no support any apple products. When they expires I will renew them with the other products belong to the other companies.

    You are entitled to 90 day telephone support from Apple. Try contacting them.
    Apple Support Contact
    Apple Support contact - Telephone

  • Palm contacts do not sync with address book

    Contact data from my Palm Tungsten does not sync with Address Book. I am running the latest Palm OS and Desktop with iSync 1.5 and Panther OS 10.3.9. Calendar is syncing correctly. According to the log, iSync thinks that the Address Book is also working but no data gets transferred in either directon. Any suggestions? Thanks.
    Power Book   Mac OS X (10.3.9)  

    Hi,
    i also used iSync for a long time with my Tungsten. BUT(!) iSync is very poor! I learned to know MissingSync and this is a really cool App! Now i have categories in my calender after syncing with my Titanium, i have all adresses and there are a lot of more cool features. Look here:
    http://markspace.com/
    for more information.
    Michael

  • Membership rules does not work with UDF column name having the max length

    Found a bug in OIM .
    Membership rules does not work with UDF column name having the maximum length
    Steps to Reproduce
    1.Create a UDF having max column name length for eg UDF_USR_PERSONAL_SUB_DOMAIN_CO (lable = Personal Code)
    2. Create a simple Rule like Personal Code = 7000
    3. Assign this Rule as a member ship rule of a Group.
    4. Create a user with Personal Code = 7000.
    5. User doesnot get the group membership.
    Thanks
    Suren

    Yes , i verified logs as well .
    If you just decrease the column name length , w/o making change to any other attributes , it starts working ..
    Thanks
    Suren

  • PickList Update - Input values [...] does not match with expected class names

    Hi everybody!
    I try to update a picklist via b1if but I always get the following error-message:
    Exception : Input values '["3" , "3"]' does not match with expected class names '["com.sap.smb.sbo.api.ICompany" , "java.lang.Integer"]' for SBO object type '156'
    As you can see in the error-message I use object type 156 “PickLists”.
    Below you can see the message to the B1 Object – atom:
    <Payload id="atom1" Role="X">
        <System xmlns="">0010000100</System>
        <QueryParams xmlns="">
            <AbsoluteEntry>3</AbsoluteEntry>
        </QueryParams>
        <PickLists xmlns="">
            <row>
                <PickDate>20120914</PickDate>
            </row>
        </PickLists>
        <PickLists_Lines xmlns="">
            <row>
                <OrderEntry>248</OrderEntry>
                <OrderRowID>0</OrderRowID>
                <PickedQuantity>1</PickedQuantity>
            </row>
        </PickLists_Lines>
    </Payload>
    …and the result:
    <Payload status="success" id="atom2" Role="C" DImsg=" Exception :
    Input values '["3" , "3"]' does not match with expected class names
    '["com.sap.smb.sbo.api.ICompany" , "java.lang.Integer"]' for SBO object type '156'"
    DIresult="failure" keyvalue="3" keyname="AbsEntry" payload="atom1" objectid="156"
    method="Synchronous Update" b1login="Technical User" system="0010000100"/>
    I just can’t figure out meaning of the error-message…anyone can help?
    Thanks in advance!
    Best Regards
    Alex

    Hey Alex,
    I have a similar problem. I suppose you have solved your problem, because this post is very old. Perhaps you could share the solution?
    Best regards
    Benjamin

  • Time bucket not displaying in planning book

    When I opened planning book, the time bucket is not displaying as it used to be. I tried to select CVC to be displayed in the planning book and got the following error message:
    @5C\QError@     Insufficient information about read period transferred
    @5C\QError@     Error reading data - Planning book cannot be processed further
    Insufficient information about read period transferred
    Message no. /SAPAPO/TSM231
    This internal error should not occur during normal processing. However if this message is displayed, contact your system administration or the SAP hotline quoting the message number.
    Any idea what went wrong?

    Hi Nic,
    Either someone deleted the time bucket profile, or else the periodicities in the time bucket profile are not in line with the periodicity allowed in your planning area.
    Go to Advanced Planning and Optimization-> Demand Planning -> Environment -> Current Settings -> Maintain Time Buckets Profile for Demand Plng and Supply Network Plng, or directly use the tcode "/SAPAPO/TR30".
    Check that your time bucket profiles ZDP_PBP_9Q & ZDP_PBP_5Q exist by using F4 help, and also select them to see what periods are used in the time bucket profile e.g. weeks, days, etc.
    If you don't find the time bucket profile, then they need to be created (based on names, my guess is that *9Q will contain 9 quarters, and *5Q will contain 5 quarters). I expect that issue lies here itself.
    If time buckets profile exist, then check the following:
    1) Go to /sapapo/msdp_admin, select your planning area. See the storage bucket profile name in the "info" tab.
    2) Go to /SAPAPO/TR32  (Periodicities for Planning Area). Give the name of the Storage bucket profile that you see in 1.
    3) Check what periods are used in storage bucket profile.
    4) Storage bucket profile needs to have lower periods maintained than the time bucket profile. e.g. assuming that your time bucket profile has quarters, then you need to have at least quarter maintained in storage bucket profile. Even if you have day or week or month selected in storage bucket profile, it's ok because these are smaller periods than quarters what you have in time bucket profile.
    Also make a note if "post period" is checked. Note the name of "fiscal year variant" if that is maintained along with this tick. I hope you don;t need to go further but if above don;t resolve your issue, then we need to check the fiscal year variant.
    Thanks - Pawan

  • Colors not consistent with Snow Leopard 10.6 on an Eizo SX2761W monitor

    I am unable to get any color consistency with Snow Leopard 10.6 on my Eizo SX2761W display.
    Most of the actual "content" (i.e. images, videos, websites, etc.) is displayed very saturated and dark, much more saturated and dark than in 10.5.8. I presume that's because of Snow Leopard's new gamma value. The problem is, all of OS X's GUI elements, like the dock, icons and color labels in the finder, title bar buttons, etc. are not displayed in the same manner. These elements are all very desaturated, pale and grayish. NoMachine NX sessions running in X11 (via Rosetta) also have this desaturated look in Snow Leopard.
    Here's a screenshot comparison I put together, that shows those color inconsistencies using the example of Mozilla's Firefox logo on the web in Safari, on the web in an NX session and as an icon in the Finder and in the Dock:
    http://dl.getdropbox.com/u/7276/SnowLeopard-ColorsAndContrast.png (1 MB)
    As far as I could test it, I get these color/contrast discrepancies only on the Eizo SX2761W monitor. I checked this on a classic Mac Pro and a late Mac mini with the same results. On a MacBook and its internal display Snow Leopard's colors seem consistent.
    I tried to recalibrate the SX2761W profile, I tried out all the other standard color profiles available in Snow Leopard, I tried to copy my old profiles over from a Leopard backup, but I was unable to get rid of the display inconsistencies. After a whole day of trying and tinkering I went back to 10.5.8 to get a consistent color environment back.
    Any ideas what's causing this and more importantly what to do about it? I have to say I'm at my wits end. The only thing I can think of is mailing this issue to Apple in the hope there will be a point release in the not too distant future that fixes the problem.

    I have what I assume is the same problem. It just started today on my DELL WFP2407 - but remains even when switching to my MacBook Pro's built in screen.
    The Dock, Safari, the desktop background - and probably other colour managed applications; all show very pale blue hues with over saturated red. Blue goes towards purple and other colours get muddled and pale. Oddly the Finder displays colours correctly on icons, but not the dock. I took a screenshot of Finder's Safari icon next to The Dock's:
    http://www.nuxx.dk/hosting/paledock.png
    - Clearly showing significant inconsistency... I just updated to 10.6.1 which didn't change anything.
    Needless to say I tried calibrating a new colour profile to no effect, and seeing as the finder itself renders things just fine I'm not sure that's where the issue lies.
    This is a huge problem for me, I hope there is a simple solution.
    Message was edited by: nuxxie

  • The rendered records are not consistent with the range

    After changing the range with record navigator to render the records,
    if navigate to other page and go back,the rendered records will not be
    consistent with the record range.
    The issue can be reproduced as follows.
    1.when select 1-10 range,the first 10 records are rendered.
    2.select [Next 10 records] to render the 11-13 records.
    3.change to other page and return to the original page.
    It is found that the 11-13 records are rendered but the range is 1-10.
    You can verify the issue by executing SampleMainPG.xml of the Tutorial.jpr for 11.5.10.2
    from Jdeveloper after changing the SampleMainCO.java as below.
    * Layout and page setup logic for a region.
    * @param pageContext the current OA page context
    * @param webBean the web bean corresponding to the region
    public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processRequest(pageContext, webBean);
    if (pageContext.getTransactionValue("link") != null)
    OAAdvancedTableBean inner = (OAAdvancedTableBean)webBean.findChildRecursive("InnerTable");
    inner.clearCache(pageContext);
    inner.setAttributeValue("CLEAR_CACHE_ONCE_NOEXECUTE_ATTR", Boolean.TRUE);
    <==comment out these original source above.
    OAAdvancedTableBean outer = (OAAdvancedTableBean)webBean.findChildRecursive("OuterTable");
    outer.queryData(pageContext, false);
    <==add the two rows of source above to get the latest query data.
    you should to make the records of the table fwk_tbx_employees to be more than 10 just using the SQL script below.
    (just need to change EMPLOYEE_ID at your will)
    INSERT INTO fwk_tbx_employees (
    EMPLOYEE_ID,
    TITLE,
    FIRST_NAME,
    MIDDLE_NAMES,
    LAST_NAME,
    FULL_NAME,
    EMAIL_ADDRESS,
    MANAGER_ID,
    POSITION_CODE,
    SALARY,
    START_DATE,
    END_DATE,
    LAST_UPDATE_DATE,
    LAST_UPDATED_BY,
    CREATION_DATE,
    CREATED_BY,
    LAST_UPDATE_LOGIN,
    ATTRIBUTE_CATEGORY,
    ATTRIBUTE1,
    ATTRIBUTE2,
    ATTRIBUTE3,
    ATTRIBUTE4,
    ATTRIBUTE5,
    ATTRIBUTE6,
    ATTRIBUTE7,
    ATTRIBUTE8,
    ATTRIBUTE9,
    ATTRIBUTE10,
    ATTRIBUTE11,
    ATTRIBUTE12,
    ATTRIBUTE13,
    ATTRIBUTE14,
    ATTRIBUTE15 )
    VALUES (
    17,
    'ichiro',
    'yamada',
    'ichiro yamada',
    1,
    0,
    sysdate,
    sysdate,
    sysdate,
    0,
    sysdate,
    0,
    0,
    it seems that if use the functions below,the issue can be workarounded.
    But it is not clear whether there is any other impact from these functions.
    innerTable1.clearCache(pageContext);
    innerTable1.setAttributeValue("CLEAR_CACHE_ONCE_NOEXECUTE_ATTR", Boolean.TRUE);
    Could you please share your idea?
    Thank you very much in advance.
    Best regards,
    Wang

    FYI.  I was able to do what I wanted by first going to page properties and removing unwanted fonts from appearance.  Then edit the page, select all, change style to normal, then select the text where you want to use a different style and change style there.  This gives consistent appearance with both browsers.

Maybe you are looking for