Graph wont allow dragging of cursor
Im working on a vi that has been created by somebody else. The graph they have used doesn't allow you to drag cursors on it, it just gives you a zoom icon when you move your mouse over it. Whereas if i create a new graph, this does allow it. I have attached an example with two graphs, one been the problematic one and the other been a correct working new one.
Can anybody tell me how to allow the dragging off cursors? It is not the "allow drag" option. I dont really want to replace the graph with a new one as it is referenced alot within alot of sub vi's.
Any help will be much appriciated.
Attachments:
ExampleGraph1.vi 40 KB
When the graph was copied and pasted onto a new graph it must have been in "zoom" mode. To change the mode right-click on the graph and make the Graph Palette visible (in the "Visibility" submenu). If you do this on both graphs you will see that the top one is in "cursor" mode, while the bottom is in "zoom" mode.
Similar Messages
-
Position Cursor on GRAPH either by dragging it OR entering the dsired position in the Cursor legend
I've written a VI that allows the user to import a dataset, view it on a graph, and then use cursors to "filter" the range of data that I'm interested in, by sending the cursor.index values from the first graph to an array subset function which feeds a second graph. The problem is that I'd like to provide the user the ability to position the cursors on the first graph both visually - by dragging - (for "course" control) AND by entering the desired values directly into the cursor legend (for fine control). The problem is that I cannot find a way to do this, since I have to have the Lock Ring set to “Lock to Plot” in order to capture the index information. According to the documentation, the only way to be able to position the cursors via the Cursor legend is to set the Lock Ring to “Free”, which means the index values are rendered useless, since the cursor is no longer locked to the plot. If I leave the Lock Ring in "Lock to Plot", and enter a value in the cursor legend, it does move the cursor, but not to where it should. If I enter a value an x value of 9.0 for cursor 1, the cursor goes to 10.2638. The next time I enter 9.0, it goes to 9.82794. I don't understand what the issue is. Is there a way around this?
Attachments:
ppv data filter 3.vi 366 KBYes Rudi: What I want is for the operator to place the cursors by dragging them (just eye-balling it). The, if they see that the Y cursor (horizontal) is at 10.234, and they want to make it 10, they could simply enter that value in the cursor legend, and the cursor would be placed exactly at 10. The only way to do this seems to be to select the “Free” option for the cursor. However, in order to use the first graph to set the boundaries of the second graph, I have to use the Cursor Index from the first as an input to the Array Subset that feeds the second graph. In order to use the Cursor Index, the first graph has to have its cursor Lock Rings set to “Lock to Plot”. Am I making this any more understandable, or just rambling?
-
I have a mixed signal graph that allows me to drag and drop my traces between the plot areas, then it stops allowing it.
If I start with a new graph it allows it but eventually stops allowing it.
I have 4 XY charts feeding the one mixed singal graph through a bundle function, then I run it once and drag my traces to the correct plot area
and hope that it keeps working.
Best Regards
Tim C.
1:30 Seconds ARRRGHHH!!!! I want my popcorn NOW! Isn't there anything faster than a microwave!Hi Tim,
That sounds like some interesting behavior. Can you reproduce what you were seeing, or have you continued to be able to drag the signals to other plots since you saved and reopened your program?
Jennifer R.
National Instruments
Applications Engineer -
I have photoshop cc, and I am used to photoshop elements. In photoshop it wont allow me to just click on a layer, and have it select that layer . I have to click on the layer in the box that shows all my layers in order to select it. I also want it to not only select the layer on the actual project, but put a hashed line around it that allows me to resize it manually, without having to do it in another window. Does that make sense? I cant even get the layer to select. PLEAE HELP. Id also be able to just click on the layer and drag it. It wont let me, and I am confused.
If you were serious to learn Photoshop, I'd advise you to take Photoshop classes at your nearest community college or some such institution, to take a subscription to lynda.com, to watch all the Photoshop videos at Adobe TV, to google for specific video tutorials on You Tube and for other tutorials in text format.
Even the Help menu in Photoshop can be a great starting place.
Don't expect to find in Photoshop the kind of hand-holding features that Elements has and that appeal to beginners and amateurs. -
Adobe wont allow me to renew my license
Hey,
so, my company CC got cancelled, and ever since it wont allow me to use a difference card. Customer support just send me round in circles always promising to call back, but never do. Has anyone ever had a similar problem / solution? I deseperatey need access to the software but the folks on the end of the phone really couldnt care less and dont even repsond to update to the online ticket/case system.
Ps...should say, I'm talking about Creative Cloud.
Thanks
MarkHi Jeff,
many thanks for getting back to me. The error message I get is on step 5, it simply says "We'll look into that and get back to you" followed by "you should get an email from us in the next business day etc etc" I've tried this a few times using different cards, both personal and company cards, debit and credit. My case number is #0211430930.
I've spoken to numerous people in customer suppport but all they say is they'll escalate it, but no one rings back.
Thanks again for your help.
Mark -
''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/986549 /questions/986549]''
my problem is very simple......firefox wont allow me save my downloads to any other location than my c drive....for example i have gone into options and set save downloads to my e drive....but still firefox keeps saving them to my c drive....i have 4 internal hard drives in my rig....and have tried saving downloads to them all.......why this is happening i cant understand....i have tried lots of suggestions....and have re-installed firefox multiple timeshello, there's a general regression in firefox 27 that won't allow files to download directly into a root drive. please try to create a subfolder (like ''E:\Downloads'') and set this as default location for downloads...
also see [https://bugzilla.mozilla.org/show_bug.cgi?id=958899 bug #958899]. -
I updated my iphone 4s on my computer - I lost a lot of pictures - it gave me messages that I had sent back in June and now it wont allow me to play any of my itunes on my phone - any got any solutions to what I should do? HELP
I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again. -
Iphone 3gs wont allow me to enter password
My iphone 3gs wont allow me to enter my password. the graphics on the phone seem to show the basic framework - ie boxes around the numbers etc.
Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
when we try to buy a new app or update our existing apps, my account settings wont allow me to enter ANY of my credit cards. It says to contact apple/itunes/support, but when I do, I don't understand how to navigate it to find an answer. Help!
Click here and ask the iTunes Store staff for assistance.
(108048) -
My iphone 4S wont allow me to restore a bckup of icloud it has just rebooted the os and for over 24 hours i have been trying to fix it i use this phone for my job so i need help. when i try to restore it says "Your iphone could not be activated becuase the activation server is unavailable, If the problom presests goto apple.com/support" It has done this for 27 hours now PLEASE HELP!!!!!!!!!
- Connect the iPod to the computer and see if iTunes sees it. If it sees it try to get the photos off the iPod.
- Next let the battery fully drain. It will likely take days. After charging for at least an hour try again
- Last, make an appointment at the Genius Bar of an Apple store. -
my iphone 4 wont allow me to connect to wifi of any sort i have rest the settings on my phone and my wireless router whats the problem
Use this article: iOS: Troubleshooting Wi-Fi networks and connections
-
When i connect my iPhone to iTunes, it says i have to set up my iPhone, and wont allow me to sync any media i have already purchased on it. My phone is not new, so I dont understand? This all came about when i updated the iOS 6 software. I have tried to re-set up my phone but it makes no difference and deletes everything off my phone.
bubblesblom wrote:
Okay, so my friends think it is funny to change the passcode on my iPhone.
Maybe you should get new friends.
I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
If you can't update or restore your iOS device - Apple Support
If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
iCloud: Erase your device - Apple Support
This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone. -
My Ipod touch wont allow me to get into itunes. So I downloaded some apps through istore onto the itunes on my computer, yet it still wont allow me to sync them to my ipod. It doesnt even give me the option to do so. The only things syncing to my ipod are music and pictures. Can anyone please help me??
You need to restore the iPod on the new computer. You can only sync apps (and some other stuff) from different computers/libraries but you can manage music and some other stuff among different computers/libraries.
You need to restore you iPod and see the following regarding the pairing error message.
pairing record ?: Apple Support Communities
A fix for those "Pairing Record Missing" errors | TUAW - The Unofficial Apple Weblog -
can i set up my new iphone 5s using my ipad (because my work laptop wont allow me to installl itunes).?
No, but you do not need iTunes to setup a new iPhone 5s. Create an iCloud backup for anything you want to transfer to the new iPhone.
-
Everytime I try and sign into my iCloud account it tells me I can't log in due to a server error, but there is nothing wrong with my server . It also wont allow me to view any of my Photos or Documents that I have backed up. Please help
Hi,
Are you running any Anti-virus software or do you have your firewall turned on? If so, disable them and try again. If that doesn't work, delete the iCloud account and then sign it back on again.
Make sure you are running the most current version of the iCloud Control Panel:
http://support.apple.com/kb/dl1455
Cheers,
GB
Maybe you are looking for
-
Need help in using my GPRS connection to surf internet on macbook
Hi, I have a Nokia 9300 communicator, with a GPRS conenction. I want to use it to connect to the internet on my macbook. Since I am in India, my service provider, not having sufficient knowledge of the mac, cannot help me with configuring it. can any
-
Error while calling the standard Program
Hi, I am using the Program <b>RMDATIND</b>, While executing the program ,I am getting an error as <b>The field MARC-AUSDT is not ready for input and was therefore not transfered. </b>. What exactly this means? the message type used is MG. I have tr
-
How to print variable in binary mode?
I would like to print NewVar variable in binary mode e.g.: byte NewVar = 0x25; System.out.println( "print here NewVar in binary mode" ); 1) How to do it? 2) Above I declared NewVar in hexadecimal, how to declare it in binary mode? 3) Where in the net
-
Paramater Criteria not selecting correct data
Why oh why would disco do this I have a field configured in the EUL to a format mask of "Mon" it shows a truncated date field with Jan, Feb, Mar etc... When I put selection criteria on the field to only display JAN it brings back the columns with Jan
-
"Do Not use setup Cartridges" message when setting up Officejet Pro 8600
Just trying to set up a new Officejet Pro 8600 and installed the catridges that were in the box but I just get a message on th ediplay that says "Do not use setup cartridges - Y" and I can't get any further. I've taken them all out and put them back