Graph x-axis values

Hi ,
i'm looking for some algorithm that returns nice ticks on a xasix
rounded on 10
fe
i have values
16
67
87
92
i want to get all the values
0-10-20....100
so rounded at 10 or 5
greetings Sven

Here is the method:
public static int compute(int argument, int d)
return argument%d == 0 ? argument : (argument/d + 1)*d;
Now, you can call the method for 10:
int k = compute(123, 10);
Armen

Similar Messages

  • Line Graph  X-axis Value

    Hi ,
    I Created line graph in ADF X axis - date , Y axis Amount and Currency Mixed Frequency Line graph
    For ex : X - axis dates are 01-jan-2011 to 10-jan-2011
    y - axis are amount and currency
    when i click particular currency line (on 05-jan-2011) how i will get the x axis value 05-jan-2011
    Thanks
    Shk

    Check the range against which line is plotted, you may have to reduce that range to see accurate values.

  • How do I graph multiple bit values on one time axis?

    I want to graph multiple bit values, all of which will change back and forth from 0 to 1, on the same time axis, but I don't want any visual overlap between the different bit value traces.  Now I could do this by graphing bit one as either 0 or 1, bit 2 as 2 or 3, bit 3 as 4 or 5, etc., but I would really rather have multiple Y axes showing 0 to 1, stacked vertically on the same time (X) axis.
    You could visualize this as multiple pens on a strip chart continuously recording different values.  Each pen has its own vertical area in which it writes, but all pens could be writing data from the same numerical range.
    Hmmm...  I think my description might be roughly as clear as mud, but if anyone out there can figure out what I am asking and has potential solutions, please let me know.
    Thanks!

    Thanks.  I will look at that VI, but I think I have already seen it.  My problem is that I have CAN data coming in for an hour or so, but the time interval between receiving specific CAN arbitration IDs varies, so I want to plot the X axis against specific, varying time values, not a standard dT.  I'm not sure I can do this on a digital graph, but I haven't given up hope yet.
    BTW, I am receiving 8-byte CAN packages.  Some of the bytes represent actual values, but I need to break others up into individual bit values to see error and status flag settings.  Once I break the bytes into bits, I convert from analog values to digital values.

  • Graph: Get Right Y-Axis value with GetGraphCursor

    Hello,
    I'm currently developing an application for a customer which contains data being evaluated in a graph control.
    There are different scalings of data so I use the left y-axis for digital data and right x-axis for analog data.
    Now I want to add an annotation marker with the current X and Y value being displayed, when the user clicks into the graph.
    I use those two functions to determine the position and affected plot of the marker:
     GetGraphCursor(tabHandle2, TABPANEL_2_GRAPH, 1, &x, &y);
     GetGraphCursorIndex(tabHandle2, TABPANEL_2_GRAPH, 1, &plotHandle, &plotIndex);
    Now this works fine for the left y-axis, but I can't seem to find a way to get the y-axis value of the right side plot.
    I figure plotHandle and plotIndex should help me to get this data, but sadly I don't know how to use this information.

    Ok to clarify:
    I have a graph with plot values on the left and right y axis. Some plots use the left and some the right side.
    On default there is no cursor in this graph. But I want to provide the option for the user to enable a cursor.
    When the cursor is enabled it snaps on to the closest plot and an annotation shows the respective x and y values of the plot point.
    The problem is, when the left y axis is active and the cursor snapped onto a right y axis plot, the displayed y value is wrong (since the left scale is used).
    By left clicking into the graph, the user is able to snap the cursor onto another plot.
    So the main problem is, when clicking on a plot, the active axis has to change according to the plots respective axis.
    I can easily make this decision since the plot styles are different (left side is VAL_FAT_STEP, right side is VAL_FAT_LINE), but for the axis switch to take effect on the cursor, I would need to delete and add the cursor again. But in this process I lose positioning of the cursor and it snaps to a different plot again.

  • How to get y axis value(in a numeric control) by providing x-axis value using wave graph

    Hi,
    I'm new here, Sorry if i have selected wrong Location.
    I want to get Y-axis value (in a numeric Control) by providing X-axis Value using Wave graph.
    i want to do calculations with the obtained value.
    i have attached File and Snapshot.

    Well, you are using the Dynamic Data Type, which I almost never use, but if you convert the data to a WaveForm (using From DDT on the Signal Manipulation Palette, which is a choice when you right-click on the DDT Wire), you should be able to do this.  Do you know about how Waveforms are stored?  They are a Cluster, with t0 being a TimeStamp for the start of the Waveform, dt being the time step, and Y being the samples.  So if you want a point at 0.5 seconds and dt is 0.001, you would pull out the point at Index 499 (offset 0) from the Y array.
    Bob Schor

  • Graph X-Axis Labels are appearing in middle for negative y-axis values

    Hi,
    In my Graph Output, the X-Axis Labels are appearing in the middle (where zero is appearing) if the Y-Axis values are negative.
    It's a Line-Graph.
    Can anyone let me know how to move the X-Axis Labels to down?
    I'm using a custom Function module same as 'GFW_PRES_SHOW_MULT' wherein I'm modifying the line colors and appearance. I have to edit in this Function Module to make the X-Axis Labels appear correctly (below) even when there are negative values.
    Please let me know which Parameter of the Class CL_CU_AXIS I've to use.
    Here's the piece of code:
    CALL METHOD graphic_proxy-ref->add_cu_bundle
                EXPORTING
                  port   = if_graphic_proxy=>co_port_chart_y_prim_axis
                  bundle = bundle_axis
                IMPORTING
                  retval = local_retval.
    Thanks & Regards,
    Sowmya

    Hi Sowmya,
    Im Lakshmi working as an ABAP Developer. I have seen your profile in SCN. I saw  your postings about OLE charts.
    I have a requirement to
    1) Output data from an internal table into excel, and
    2) Create a chart from the data in excel
    So far I have been able to export the data using OLE calls, created a chart object,.
    My question:
    1. How to put Data Lables
    2. How to put Data Table under the Chart
    3. How to rename the series names.
    Below is the recorded Macro. I don't know how to convert it to ABAP.
    Sub Macro1()
    ActiveSheet.Shapes.AddChart.Select
    ActiveChart.ChartType = xlColumnClustered
    Application.CutCopyMode = False
    ActiveChart.SetSourceData Source:=Range("B1:E4")
    ActiveChart.SeriesCollection(1).Name = "=Sheet2!$A$2"
    ActiveChart.SeriesCollection(2).Name = "=Sheet2!$A$3"
    ActeChart.SeriesCollection(3).Name = "=Sheet2!$A$4"
    ActiveChart.SetElement (msoElementDataLabelOutSideEnd)
    ActiveChart.SetElement (msoElementDataTableWithLegendKeys)
    End Sub
    I have attached the current output and expected output.
    I have searched about this in google but i could not find any solution for this.
    Your help is greatly appreciated.
    Thanks,
    Lakshmi.

  • Load excel file value to graph problem(about x-axis value)

    Hello,everyone,I have this problem.
    When I load the excel file which I saved before,the waveform came out normally,but the x-axis of graph waveform was not shown the number I want,it shown the number based on the no.of samples.
    What I want is plot the x-axis value based on the rate(pts/s).For this case,rate is 50prs/s,so after calculation...0.02s per reading.totally is 20 seconds.I tried to use XY-Graph,but didn't solve out.
    Jerry
    LV 7.1
    Attachments:
    delete 0 array.vi ‏14 KB
    test3.txt ‏20 KB
    Create Waveform Graph1.vi ‏275 KB

    is it always 0.02s per reading or did you get this figure from some calculation?? in anyway, you just connect that value (the constant 0.02 or calculated amount) to a Property Node... you link the Property Node to Waveform Graph 2... under property choose X-Scale -> Offset and Multiplier -> Multiplier...
    i'm not sure if this is the best method but hope it helps... i've tried it on your code and it works...
    Best Regards,
    JQ
    LV 8.0 user...

  • How to have a vertical grid lineon the waveform graph indicator for every 10% percent of the maximum X axis value?

    Hi,
    how to have a vertical grid line on the waveform graph indicator for every 10% percent of the maximum X axis value, so the x axis will split into 10, the vertical grids line in total will be 11 (including first and last)
    Example if the maximum X axis value is 11.56, first vertical grid is at the origin(0), second vertical grid is at 1.156 and continue to last one 11.56

    Thanks JohnM and Evan,
    the increment work great and i modify it to pass the 10% into "start" too, so it will start at the point of 10% of maximum range
    attached file to let people download in future, if they met the similar situation
    Attachments:
    10percent.vi ‏31 KB

  • Excel MSGraph Axis Value w/ Report Gentration Tool kit help needed

    Hello,
    I am working on making all my Printed Data sheets dynamic so I don't need to have an Excel Template for each test I create. I have been able to make my own modifications to some of the Report Generation tool kit VIs to add little things I need or want changed, but I am stuck.
    I currently have LabVIEW writing Charts in Excel, using the Insert Graph VIs from the tool kit but I want to be able to make the X Axis Values invisible but leave the Y values for this particular data sheet.  I have looked through all my documentation but cannot find anything referring to setting that.
    What is the correct ActiveX Method and/or Property that I need to incorporate to do this? I found that in Excel if I click on the Chart it is in the Chart Options Menu but I cannot find a way to control it through LabVIEW.
    I am currently using 7.1.1 with Office 98 and the Report Generation Toolkit 1.1.0
    Any ideas?
    Thanks
    Jeff
    Jeff D.
    OS: Win 7 Ultimate
    LabVIEW Version: 2011,2010,2009 installed
    Certified LabVIEW Architect

    Hello,
    LabVIEW should have access to everything that the excel ActiveX object publishes.  One way to discover how to do it would be to record a macro in excel, where your recorded actions are on the x-axis as you desire.  This way you will have a macro which you can run that will do this for you.  Perhpas more importantly, you will then be able to look at the code for that macro you recorded, and make the equivalent calls in LabVIEW, which should basically expose which ActiveX calls on that object achieve the axis modification.  In any event, to help you with this process, below are some useful links.  Also, you will find other threads on this matter if you search the discussion forums.
    Excel and LabVIEW Integration Tutorial:
    http://zone.ni.com/devzone/conceptd.nsf/webmain/4d86c9752c658da78625689300730c10
    Here are links to examples of using macros in Excel from LabVIEW:
    http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3DD2F56A4E034080020E74861&p_...
    http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3D9D856A4E034080020E74861&p_...
    I hope this helps!
    Best Regards,
    JLS
    Best,
    JLS
    Sixclear

  • Line chart cuts off x-Axis value

    Hi All,
    Have created a display to display an x-Axis value versus a Y-Axis value using a Line Chart. We want to maximize the chart space so we have removed the Legend from the display, problem is doing this cuts of part of the final x-Axis label and part of the final data point on the graph ? Why - can we move the borders out ?
    Emmett

    Emmett,
    You can "Fake" some extra space out of the right side of the chart by setting the legend colors to blend into the background of the chart.  This includes unchecking the "Use Pen Color?" box and setting the labels in the legend to match as well.  Then simply set the legend to be whatever additional width you need.  Other than this there's not really any other way that I can think of.  Hope this helps.
    Sam

  • How do I update the chart axis values??

    I created a Gantt (bar chart) chart in Numbers for a project at work showing schedules.  It looked fine, and everything worked great.  I want to use that same chart, but I want to just update the data in it.  I can get the bars to change, but the Y axis data (not the numbered values in the chart, but rather the the actual names out to the side of the chart) will not change.  For instance....
    Name
    Start Date
    Finish
    Task 1
    January 1, 2013
    January 15, 2013
    Task 2
    February 1, 2013
    February 15, 2013
    The Tasks on the left will be the Y axis fields in a bar chart....and the dates will populate the graph.  I've created my graph from this data and got it like I want it.  Now let's say I want to simply change some things in the Name column:
    Name
    Start Date
    Finish
    New Task
    January 1, 2013
    January 15, 2013
    Task 4
    February 1, 2013
    February 15, 2013
    So without creating a new chart or anything, I just want to reflect the new names in my existing chart.  In Excel, when you change the value data, it updates the chart and "it just works" .  I'm wanting to use Numbers for this, and I feel like this is a simple thing that I'm just missing.  Help!

    Jerrold....thanks for the reply.  While you didn't answer my question exactly (I know I was a bit vague), you did put me on the right path.  I was trying to get the Category Axis values to change on the chart whenever I updated them in the table itself.  I couldn't figure out why they weren't but I think I have now. 
    I noticed that in the Category Axis field (Inspector) it had the actual typed names of my tasks from the table instead of the cell locations.  So...."Task 1" instead of "Table 1: C7".  I cleared out all of the text in the Category Axis field, which removed it from the chart.  then I just clicked on the fields in the table and it populated the Category Axis blank with the table/cell info instead of the text.  So now when I update one of the fields, it updates the chart because it's pulling from the cell data every time.
    I'm not really sure why Number, by default, enters the text into the Category Axis when making a chart instead of putting in the corresponding cell locations, but whatever.  I got it working now and should be good to go going forward, thanks for your help.

  • Line Charts - X-axis Labels as function of X-axis value

    Hi,
    1) Is there a way to put X-Axis labels in line chart as function of X-axis values ?
    For instance, X-axis values are in minutes and I need to show those as Hours.
    I'm having Hours as separate column as well, but when its selected as X-axis value column, the line graph is disturbed.
    2) Also, how to specify the length/range of X-axis ?
    For instance, in dataset if I've x-axis values from 0 to 5 hours but still want to show on graph the X-axis till 8 hours.
    Thanks for your help in advance.
    Regards,
    Sumit

    Hi Sumit,
    I have tried following things with proper datetime format may be help you.
    1> in your applet code you can add below param
    <PARAM NAME="XAxisDateFormat" VALUE="H">
    it will display your levels in hours for more details please refer Date and Time Format under query template in MII help.
    2>In your Query template under date range you can select duration and duration unit.
    for 8 hour span you can select Duration = 8 and in duration unit = H
    I have tested it for a tag query, may be i did not understand your issue properly but hope it helps you!!!
    Regards,
    Manoj Bilthare

  • Issue with Date Format in line Graph X-AXIS

    Hi all,
    I have a line graph, with data in x-axis and integer values in y-axis.
    I am fetching data in Mon-dd-yyyy format but in graph (x-axis) it showing in yyyy-mm-dd format.
    How to change this format.
    Regards,
    Krishna Prasad

    Hi,
    Basically you are trying to convert a date into date which is not advisable. Hence convert it to char and then equate it against a character value. Also do not use trunc as it will trim out the time part of the date.
    select * from test
               where to_char(dob,'RRRR/MM/DD HH24:MI:SS')=:p1Then pass the parameter
    cheers
    VT
    Edited by: VT on Oct 26, 2010 4:16 PM

  • Log Axis value?

    Hello
    The X axis I think in the display panel logQ base Q, but the X axis value or the logQ this calculated value, for example: the requirement that correspond to the 1000 in the log1000 X axis,. Would you please tell me how to do? As shown in Fig.
    Thank you

    I'm not sure if I understood you correctly, but every single axis in a graph can have a log scale: you can set it this way:
    The result is as follows:
    If this is not your problem, can you rephrase your questio so that we can understood what you need?
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • Graph X-axis format

    Hello,
    I would like to change my X-axis (time axis) values of graduation. I want to make a numeric operation with each graduation.
    For example, now I have got all my graduation from 0 to 0,05 and I want them from 0 to the result of 0,05 / 2E-5. I want to make this operation over all graduation, since when I will zoom on the graph, the scale must be adapted with the operation.
    Cordially,
    BD
    Bonjour,
    Je souhaiterais formater l' axe des abscisses de mon graphe (axe des temps). Je voudrais changer la valeur de mes intervalles en appliquant une opération numérique.
    Par exemple, mon graphe est gradué de 0 à 0,05, et je voudrais qu'il soit de 0 à 0,05 / 2E-5. J'aimerais faire cette opération sur toutes les graduations, pour que lors d'un zoom, je puisse retrouver cette nouvelle échelle.
    Cordialement,
    BD
    ~ La programmeuse compile le C. ~
    http://www.pmeonline.fr.st
    http://www.nihon-fr.com
    http://www.cinemasie.com
    http://ippai.free.fr

    You may use Proprety Nodes to set axis format in your program. Right click on your graph terminal and select Create >> Proprety Node. It initially has one terminal (Visible by default), and you can set the proprety or get the current state of the proprety.
    You can modify the proprety your program will use by right clicking on th terminal and select the proprety you need.
    I think you will find all you need in Proprety >> Scale >> Range.
    To modify the read/write mode of the terminal, right clik on it and select Change To Read or Change To Write.
    Regards,
    Mathieu
    Message Edité par Mathieu R. le 10-17-2005 07:40 AM
    .mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
    Mathieu R.  
      CTD - Certified TestStand Developer / Développeur TestStand Certifié  
      CLAD - Certified LabVIEW Associate Developer  
    Attachments:
    XScaleSample.vi ‏30 KB

Maybe you are looking for