Graphe et Graphe déroulant

Bonjour,
J'aimerai savoir quel type de graphe accepte des échelles irrégulières sur l'axe des X ? Je pense que c'est nin l'un ni l'autre mais seulement le Graphe XY. Dites moi que je me trompe pas? Merci d'avance 
Résolu !
Accéder à la solution.

Bonjour Cisco,
Désolé, je n'ai pas la version 2010, j'ai enregistré sous une autre version mais je ne pas ouvrir. Maintenant si je comprends bien le Graphe et le Graphe déroulant n'acceptent pas des échelles irréguliers(l'axe des X) et seulement un Graphe XY accepte. Un vecteur je suppose que c'est un tableau pour les valeurs de X et la même chose pour Y. La question du test est ambigue lorsqu'on entend des échelles irrégulières l'axe des X, c-a-d l'espace des échelles n'est pas uniforme (Delta t ne doit pas être constante. Enfin je valide tout de même ta proposition avec mes remerciements pour ce détail. Je vais essayer de vous envoyer la version 2010 en espérant que tu puisses ouvrir. Merci             
Pièces jointes :
Graphe_XY_2010.vi ‏400 KB

Similar Messages

  • Working with bar graphs, pie graphs, etc.

    I'm working with somone who likes to create pie graphs, bar graphs and other charts. This guy is not a designer and is using Microsoft applications like Excel and PowerPoint to create these charts. My job is to bring these charts over to an ID document I'm working on. The black and white ones are no problem: I can convert them to a PDF, open them up in Photshop, and rasterize them. The color ones are screwed up. We are printing only black and one spot color, and Excel is apparently programmed to save color charts as RGB or CMYK. So my basic question is: what do you do for graphs? Is there a good application for making graphs that are design quality that knows how to do spot color? Or is it best to lay out graphs manually ID, by drawing lines, shapes and bars and coloring in the spot colors myself? Thanks.

    Illustrator.
    You should be able to bring your Excel or PowerPoint graphs into Illustrator as easily as into Photoshop.

  • After upgrading to Mountain Lion, Mac Grapher will no longer load my 3D graph.  "Grapher quit unexpectedly" every time.  The graph is huge but it WOULD load eventually under snow leopard.

    This is part of the error report.  I can post the whole thing if it would help.
    Terminating app due to uncaught exception 'NSMallocException', reason: 'NSImage: Insufficient memory to allocate pixel data buffer of 44800 bytes.

    Bonjour PanicRev16
       I use Grapher 2D 3D on my early 2006 iMac, but I tried it on my wife's Macbook Pro with Lion then Mountain Lion : no problem with Grapher 2.1  3D gcx files, Grapher 2.3 loves them !
       You can try the 3D Grapher 2.1 files from the website  http://y.barois.free.fr/grapher/  and see the result on your Mac Mountain Lion.
       I updated Grapher documentation and bugs of this website on 15th december 2012 (Lion, then Mountain Lion).
      Au revoir,
    YB24

  • Filter out marked data from XY graph (Draw graph)

    Hi there,
    I've a question about "filtering" data from an XY Graph, please see the attachement.
    The graph shows some sample data (white plot) and a red "ballon" plot (you can press left mouse button
    and move over the graph to draw the red plot).
    My need is to get all samples inside the red ballon, but presently I got stuck with it!
    Any Ideas?!
    (The attached VI is saved by LabVIEW2009 version)
    Solved!
    Go to Solution.
    Attachments:
    Paint_XY_Graph.vi ‏24 KB

    To determine id a point is inside of the red baloon it must satisfy the condition where the X,Y is less than any X,Y point and greater than any other X,Y point.   To filter them out remove outliers from the array or set their values to nan to not plot them 
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • When I insert new data on an existing graph, the graph deletes

    When I insert new data on an existing graph (for example, just adding a new year of data) and press insert, it just deletes the graph entirely. My only option is to recreate the entire graph which is frustrating because I lose its format and colors. Any suggestions?

    Here I opened the existing chart, with the old data. I need to remove the oldest year and add a new year. Which I do below:
    When I press the check mark, or enter, the graph details all delete.

  • How to plot a log graph using grapher with a given set of data

    hi there,
    im just wondering is it possible to plot a log graph in the grapher software with a given set of data, and also give an error bar and a best-fit line for it?
    so here is the set of data,
    Concentration of BCh (M)
    Mean % Specific Binding (%)
    Standard Deviation
    3 ×10⁻⁹
    71.52
    9.52
    1 ×10⁻⁸
    57.30
    8.56
    3 ×10⁻⁸
    39.15
    9.40
    1 ×10⁻⁷
    24.13
    10.15
    3 ×10⁻⁷
    14.77
    3.31
    1 ×10⁻⁶
    7.22
    2.02
    hope someone could help

    Try these:
    http://y.barois.free.fr/grapher/Bienvenue.html
    http://homepage.mac.com/tlindywizdumb/math/Grapher_index.htm
    http://homepage.mac.com/tlindywizdumb/math/Grapher/Grapher_HowTo.pdf

  • What has happened to my graphs? Graphs gone blank

    I have a large application with many indicators, controllers and graphs. Suddenly, all my graphs went blank as shown in the attached picture. Not showing the graph it self, the grid or the numbers along the axis. All new graphs I try to create in this VI have the same problem. If I copy the graph and past it in a new VI then it works fine. So, apparently, it is a problem with the VI. I tried to delete everything except the graph, but the behavior is still there. I have attached this VI. What can I do to get my graphs back? 
    The application was made with LabView 8.5
    Attachments:
    graph.jpg ‏12 KB
    Test.vi ‏10 KB

    You misunderstood
    my question.
    Yes it is
    empty, but if you try to send anything to it you won’t see anything.
    I have not
    connected anything to it because the problem is more serious than that. The graph
    doesn’t show the grid or the numbers along the axis. And that is even before
    anything is connected to it. Even if you try to add a completely new graph to
    this VI, it comes up with the same problem. Attached is an image of how the
    graph should look like.
    Attachments:
    graph2.jpg ‏33 KB

  • SubVI - VI Update ? Graph, Intensity graph.

    I have a subVI which calculates data that is to be displayed in an
    intensity graph as it gets updated. I want to display the same
    intensity graph on my main VI to show the progress and update. I've
    tried using global variables, but it doesn't work well. Any suggestions
    Thanks
    Kudos always welcome for helpful posts

    I tried that before. doesnt seem to work. Please see attachment...
    Kudos always welcome for helpful posts
    Attachments:
    main.llb ‏36 KB

  • How do I send a pdf of a graph from grapher to pages?

    I use the program grapher for school work and to make graphs for my math classes.
    in the grapher print window there is a way to automatically send a pdf of the graph to various programs including mail, iTunes, and Preview.
    I am wondering if there is a way to send it directly to Pages. I have a feeling that it will involve Automator.
    Can anybody tell me how to do this?    

    Another approach that could be useful if you have dozens of Grapher files: set up a virtual print-to-PDF printer with CUPS-PDF, https://bitbucket.org/codepoet/cups-pdf-for-mac-os-x/wiki/Home.  For further info, see this somewhat out-of-date article on an earlier version of CUPS-PDF: http://www.macworld.com/article/139518/2009/03/cupspdf.html.  By the way, I don't know whether CUPS-PDF still works under Lion.  My comments here are based on Snow Leopard.
    Drag all .gcx files to the virtual print-to-PDF printer icon.  As CUPS-PDF does its job on each file, Grapher will open and close quickly with error messages to the effect that "Grapher quit unexpectedly," but the PDFs will be produced nonetheless.  Then drag all the PDFs into Pages.
    A couple of notes:
    1. The Grapher images rotate 90º as the PDFs are created.  There's probably a way to adjust CUPS-PDF to keep the Grapher orientation if that's important to you.
    2. The PDF image is dependent on the size of the Grapher window for each graph.  If a PDF reveals only part of the graph, open the .gcx in Grapher, reduce the window size, and resave the file before sending it through CUPS-PDF again.

  • Comment faire le contrôle des échelles d'un graphe déroulant et réinitialisation un programme a chaque arrêt du programme

    Bonjour,
    j'ai un problème avec mon vi ,au fait je fais l'acquisition des données grâce a un dacmx en suite j'affiche les données dans un graphe déroulant le problème est qu'il m'affiche une échelle sur x que je veux (moi je veux avoir un 0 au début et a la fin un chiffre qui m'indique la durée de mon programme )
    j'ai un autre problème quand j'arrête le programme il faut a chaque fois que je le ferme et je rouvre de nouveaux pour que les graphe c'efface et que les alarme(led) s'éteignent ,moi c que je voudrais c que a chaque fois que j'arrête mon programme il faire une réinitialisation global .
    Cordialement

    Bonjour,
    Il y a plusieurs paramètres à configurer :
    1) Vous pouvez règler cela en faisant un clique droit sur le graph déroulant -> Echelle des X 
    2) Cochez l'onglet Echelles automatique et dans facteurs d'échelle mettez Offset à 0 et Multiplicateur à la valeur de la période entre deux échantillons en s (si la valeur entre 2 échantillons est de 100ms mettez 0.1). faites OK
    3) Pour finir vous devez définir la longueur de l'historique en faisant un clique droit sur le graphe déroulant et longueur de l'historique (si le nombre de point de l'historique n'est pas assez grand alors le graphe finira par dérouler.
    4) Enfin vous pouvez faire un clique droit sur le graphe -> Opération sur les données -> Effacer le graphe déroulant pour tous remettre à 0. Sinon vous pouvez aussi faire un clique droit sur les boutons que vous souhaitez réinitialiser et sélectionner Créer->  noeud de méthode-> réinitialiser la valeur par défaut (à mettre à la fin de l'exécution du VI dans le diagramme ou au début).
    Bien cordialement
    Jean-Luc D. NI France
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Journées techniques : du contrôle d'instruments aux bancs de test
    Du 4 au 13 juin : Grenoble - Pari...

  • Curseurs sur un graphe déroulant?

    Comment ajouter des curseurs sur un graphe déroulant?
    N'ayant qu'une seule coordonnées,la légende du curseur n'est pas disponible.Doit je convertir les données,ajouter en X une base de temps?Et comment?
    Merci
    [email protected]

    Les curseurs ne sont disponibles que sur les graphes et graphes XY.
    Vous pouvez quand même simuler un graphe déroulant à partir d'un graphe, en construisant au fur et à mesure un tableau , en utilisant un registre un décalage et en l'affichant de la même manière à chaque nouveau point. Dans ce cas, précis vous aurez accès aux curseurs.
    Le seul problème qui peut se produire dans ce cas, est que vous allez peut être avoir une saturation mémoire si votre application tourne relativement longtemps ou si vous faîtes l'acquisition de nombreux points. Cela est du à la fragmentation de la mémoire.
    Bonne continuation

  • Graph is not getting displayed in R12

    Hello folks,
    Cureently m working on R12 upgrade project.
    And we have a report which is working fine 12 but the graphs are not getting displayed as like 11i.
    Could you plz any one help how to fix the issue.
    Note: There is no error is coming up. But in the graph part , graph is not getting displayed.
    Regards,
    Krishna

    Hello folks,
    Cureently m working on R12 upgrade project.
    And we have a report which is working fine 12 but the graphs are not getting displayed as like 11i.
    Could you plz any one help how to fix the issue.
    Note: There is no error is coming up. But in the graph part , graph is not getting displayed.
    Regards,
    Krishna

  • Regarding graph in obiee 11g

    Hi All,
    i have some reports that has graph. in that graphs some graph is coming and some is not coming
    and giving error shown below.
    Graphing engine is not responding.
    A fatal error occurred while processing the request. The server responded with: oracle.bi.nanserver.fwk.exception.BISvsException: java.lang.NumberFormatException: For input string: "05:30".
    i have checked the services all are up and running.
    please help me to solve the problem.

    Issue was, Font been defined as 7.5 (may be font size decimal not supported ).the problem solved

  • Report Engine crashing on Solaris when report with graph is given.

    Hi,
    We are using following environment:
    Solaris 8
    Oracle 9i Report Sevices.
    When we try to execute reports having graphs then the report engine crashes with the following exception:
    REP-0177: Error while running in remote server
    REP-56048: Engine rwEng-0 crashed
    The complete crash log is also appendend in the end of this mail.
    When I remove the graph from the rdf then reports get exectued fine without any crash. The same rdg with graph works fine on windows NT.
    If somebody can help on this, it will be great.
    Thanks,
    Ashish
    The complete crash log is as follows:
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : 11 occurred at PC=0xf017b350
    Function name=_Xm21FreeHashTable
    Library=/usr/lib/libXm.so.4
    Current Java thread:
         at sun.awt.motif.MWindowPeer.create(Native Method)
         at sun.awt.motif.MComponentPeer.init(MComponentPeer.java:169)
         at sun.awt.motif.MWindowPeer.init(MWindowPeer.java:86)
         at sun.awt.motif.MFramePeer.<init>(MFramePeer.java:53)
         at sun.awt.motif.MToolkit.createFrame(MToolkit.java:138)
         at java.awt.Frame.addNotify(Frame.java:353)
         at java.awt.Window.pack(Window.java:369)
         at tdg.Perspective.<init>(Perspective.java:478)
         at oracle.dss.graph.PFJ.<init>(PFJ.java:47)
         at oracle.dss.graph.Graph.createPFJ(Graph.java:1190)
         at oracle.dss.graph.Graph._setupGraphView(Graph.java:353)
         at oracle.dss.graph.Graph.<init>(Graph.java:164)
         at oracle.reports.chart.Chart.<init>(Chart.java:51)
         at oracle.reports.chart.ChartRunner.<init>(ChartRunner.java:46)
         at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
         at oracle.reports.engine.EngineImpl.run(EngineImpl.java:289)
         at oracle.reports.engine.EngineClassPOATie.run(EngineClassPOATie.java:84)
         at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:117)
         at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
         at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
         at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
         at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
         at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
         at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
         at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
         at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)
    Dynamic libraries:
    0x10000      /users/orarep9i/OraHome1/jdk/jre/bin/../bin/sparc/native_threads/java
    0xff350000      /usr/lib/libthread.so.1
    0xff390000      /usr/lib/libdl.so.1
    0xff200000      /usr/lib/libc.so.1
    0xff330000      /usr/platform/SUNW,Ultra-60/lib/libc_psr.so.1
    0xfe480000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/client/libjvm.so
    0xff2d0000      /usr/lib/libCrun.so.1
    0xff1d0000      /usr/lib/libsocket.so.1
    0xff100000      /usr/lib/libnsl.so.1
    0xff0d0000      /usr/lib/libm.so.1
    0xff310000      /usr/lib/libw.so.1
    0xff0b0000      /usr/lib/libmp.so.2
    0xff080000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/native_threads/libhpi.so
    0xff040000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libverify.so
    0xfe440000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libjava.so
    0xfe410000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libzip.so
    0xf3be0000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libnet.so
    0xf3bc0000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libioser12.so
    0xf39e0000      /usr/lib/nss_nis.so.1
    0xf2000000      /users/orarep9i/OraHome1/lib/librw90.so
    0xf1d00000      /users/orarep9i/OraHome1/lib/libobx90.so.0
    0xf36b0000      /users/orarep9i/OraHome1/lib/librws90.so.0
    0xf2a80000      /users/orarep9i/OraHome1/lib/libde90.so.0
    0xf2fc0000      /users/orarep9i/OraHome1/lib/libucol90.so.0
    0xf39b0000      /users/orarep9i/OraHome1/lib/libuicc90.so.0
    0xf2ea0000      /users/orarep9i/OraHome1/lib/libca90.so.0
    0xf35e0000      /users/orarep9i/OraHome1/lib/libmma90.so.0
    0xf2dc0000      /users/orarep9i/OraHome1/lib/libmmiw90.so.0
    0xf3860000      /users/orarep9i/OraHome1/lib/libmmov90.so.0
    0xf2f90000      /users/orarep9i/OraHome1/lib/libmmos90.so.0
    0xf2cc0000      /users/orarep9i/OraHome1/lib/libmmoi90.so.0
    0xf32e0000      /users/orarep9i/OraHome1/lib/libmmia90.so.0
    0xf2da0000      /users/orarep9i/OraHome1/lib/libmmft90.so.0
    0xf1fc0000      /users/orarep9i/OraHome1/lib/libmmcm90.so.0
    0xf1c00000      /users/orarep9i/OraHome1/lib/libvgs90.so.0
    0xf2ca0000      /users/orarep9i/OraHome1/lib/libuihx90.so.0
    0xf1b90000      /users/orarep9i/OraHome1/lib/libuc90.so.0
    0xf1b20000      /users/orarep9i/OraHome1/lib/libuipr90.so.0
    0xf1900000      /users/orarep9i/OraHome1/lib/libuimotif90.so.0
    0xf1ae0000      /users/orarep9i/OraHome1/lib/libot90.so.0
    0xf18a0000      /users/orarep9i/OraHome1/lib/librem90.so.0
    0xf1820000      /users/orarep9i/OraHome1/lib/libree90.so.0
    0xf1fa0000      /users/orarep9i/OraHome1/lib/librec90.so.0
    0xf17f0000      /users/orarep9i/OraHome1/lib/libuiimg90.so.0
    0xf17b0000      /users/orarep9i/OraHome1/lib/libuia90.so.0
    0xf2a60000      /users/orarep9i/OraHome1/lib/libtknqap90.so.0
    0xf1780000      /users/orarep9i/OraHome1/lib/libutt90.so.0
    0xf1750000      /users/orarep9i/OraHome1/lib/librod90.so.0
    0xf1720000      /users/orarep9i/OraHome1/lib/libror90.so.0
    0xf16f0000      /users/orarep9i/OraHome1/lib/libros90.so.0
    0xf16c0000      /users/orarep9i/OraHome1/lib/libuat90.so.0
    0xf16a0000      /users/orarep9i/OraHome1/lib/libdfc90.so.0
    0xf1680000      /users/orarep9i/OraHome1/lib/libutc90.so.0
    0xf1660000      /users/orarep9i/OraHome1/lib/libutj90.so.0
    0xf1630000      /users/orarep9i/OraHome1/lib/libutl90.so.0
    0xf1610000      /users/orarep9i/OraHome1/lib/libsl90.so.0
    0xf0c00000      /users/orarep9i/OraHome1/lib/libclntsh.so.9.0
    0xf15f0000      /users/orarep9i/OraHome1/lib/libwtc9.so
    0xf15d0000      /usr/lib/libsched.so.1
    0xf15b0000      /usr/lib/libaio.so.1
    0xf0a00000      /usr/lib/libXm.so.3
    0xf1540000      /usr/lib/libXt.so.4
    0xf0900000      /usr/lib/libX11.so.4
    0xf1520000      /usr/lib/libgen.so.1
    0xf1500000      /usr/lib/librt.so.1
    0xf14e0000      /usr/lib/libSM.so.6
    0xf14b0000      /usr/lib/libICE.so.6
    0xf1480000      /usr/lib/libXext.so.0
    0xf0bd0000      /usr/openwin/lib/libdga.so.1
    0xf0bb0000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libawt.so
    0xf0280000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/motif21/libmawt.so
    0xf09b0000      /users/orarep9i/OraHome1/jdk/jre/bin/../lib/sparc/libmlib_image.so
    0xf0000000      /usr/lib/libXm.so.4
    0xf08e0000      /usr/openwin/lib/libXtst.so.1
    0xeff00000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libfontmanager.so
    0xf07a0000      /usr/openwin/lib/libdps.so.5
    Local Time = Fri Apr 18 09:22:09 2003
    Elapsed Time = 110
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Client VM (1.3.1_02-b02 mixed mode)

    Please try the following
    * Modify $ORACLE_HOME/bin/reports.sh, replace "classic"
    with "server" in the LD_LIBRARY_PATH for the JVM
    * Modify $ORACLE_HOME/bin/rwengine.sh, just before the exec
    command, insert the following line:
    export LD_PRELOAD=$ORACLE_HOME/jdk/jre/lib/i386/libawt.so
    In Linux there was a similar problem and the above workaround worked . You can give this a try .
    Thanks
    The Oracle Reports Team

  • Print Charts/Graphs on Smart Forms

    Hi Seniors,
    Here is a requirement on Smart Forms:
    I need to print Charts on Smart Forms. I have been through many answers on SDN but unfortunately, there are not many appropriate solutions. I executed some standard reports and got Charts and graphs as output but am not able to use it to display the same on Smart Forms. I have even  tried using classes for charts / graphs, business graphics(may be there would have been some sequential procedure for that).
    In the Smart Form, I have tried Form Attributes>Output Options>Output Format--> XSF output
    with output mode: 'Spool' and Output Device: 'XSFOUTDEV' from help.sap(I couldn't get what output device that was and was unable to execute).
    I have tried executing transaction GRAL(demo reports for SAP graphics) too.
    I found a report that would produce graph in Excel, I executed it, saved the graph from excel in '.bmp' format in SE78 and then printed it on Smart Form. But all I want is to have it done dynamically.
    I saw answers that we can save the graph chart/graph onto the desktop, upload it and then display it on the Smart Forms. But, when i tried it, I saw that it could be saved only in '.dat' format. I have to save it dynamically in a supported format like '.bmp' and print it on the Smart Forms(the graph would change depending upon the input values). Please help me resolve this.
    Thanks in Advance,
    Chaitanya.

    Dear Bouman,
    Thank you for the reply. I can write a report if would helps me to upload images dynamically. I saw your program but, here we cant give the name of the chart that comes as output. I tried to save the chart but it comes in '.dat' format but not in '.bmp' format. We may be having some classes or function modules that we need to call in a particular sequence. What other options do we have. Please help me resolve this.
    Regards,
    Chaitanya.C.N

Maybe you are looking for