Graphic drivers and latest kernel

After I upgraded my computer to the latest kernel I got problems with my graphicdrivers.
KDEmod starts normaly and t is no problems to just use it.
But when I run glxgears I got just 7 FPS.
When it works normal I got 700-800 FPS, and if I reinstall my drivers and start up kdemod it be normal, then after some hours in use the FPS running low.

You might want to tell us which driver you're using...

Similar Messages

Radeon HD 7970 Graphics Drivers and Catalyst 12.11 Software for OS X 10.8.2 Mountain Lion

Need graphics drivers and Catalyst 12.11 Software for OS X 10.8.2 Mountain Lion (to support Radeon HD 7970 Graphics cards)
Operating System
-64-bit, OS X 10.8.2
Graphics Cards (all twelve)
XFX Double D Radeon HD 7970 (FX797ATDFC)
XFX Double D Radeon HD 7970 Black Edition (FX797ATDBC)
XFX Double D Radeon HD 7970 GHz Edition (FX797GTDFC) **
Diamond Radeon HD 7970 (7970PE53G)
Diamond Radeon HD 7970 GHz Edition (7970PE53GHZ) **
Diamond Radeon HD 7970 Double Black Diamond Edition (7970PE53GDD)
ASUS Radeon HD 7970 (HD7970-DC2-3GD5)
ASUS Radeon HD 7970 GHz Edition (MATRIX-HD7970-P-3GD5)
SAPPHIRE Vapor-X Radeon HD 7970 GHz Edition (100351VXSR)
SAPPHIRE Radeon HD 7970 (100351SR)
GIGABYTE Radeon HD 7970 (GV-R797OC-3GD)
MSI Radeon HD 7970 (R7970)
Please also add graphics and hardware acceleration for H.264/H.265, and OpenCL

Love these year old threads.
Flashing is what some other sites specialize in, or even troubleshooting non-Apple cards.
There is an AMD Mac Edition 7950. Now. As well as EVGA GTX 680.
All of those were tested and reported on by Barefeats - back in March-May 2013.
Apple? not interested in PC cards other than they have quietly added more driver support in 10.8.3 and especially above. Not in 10.8.2.
Be interesting to see what Maverick support provides as far as GPUs.
And netkas and others are up on PC graphic cards, not Apple, even if they don't write drivers, they do often write how to flash a PC card and support. Apple and this discussion, no.

How and where can I get intel hd 4000 graphics drivers and controll panel to 3d settings ... I want to turn off my vertical sync! please someone has to help me with this problem!

How and where can I get intel hd 4000 graphics drivers and controll panel to 3d settings ... I want to turn off my vertical sync! please someone has to help me with this problem!

So are there any other ways to get there, or to change options there?
And is it plausible to use 3d vision (like nvidia its one) but than without an nvidia graphics card. for watching movie's and gaming etc.
Thank you!

Acpi_call-git and latest kernel upgrade

Hi,
as you could see reading comments on the acpi_call-git AUR package page, acpi_call-git package is not ready for the latest kernel upgrade.
The fix proposed doesn't work for me, I still get:
==> Checkout completed
make -C /usr/lib/modules/3.8.5-1-ARCH/build M=/home/enrico/acpi_call-git/src/acpi_call-build modules
make[1]: Entering directory `/usr/src/linux-3.8.5-1-ARCH'
CC [M] /home/enrico/acpi_call-git/src/acpi_call-build/acpi_call.o
In file included from include/linux/cache.h:4:0,
from include/linux/time.h:4,
from include/linux/stat.h:18,
from include/linux/module.h:10,
from /home/enrico/acpi_call-git/src/acpi_call-build/acpi_call.c:3:
/home/enrico/acpi_call-git/src/acpi_call-build/acpi_call.c: In function ‘acpi_result_to_
include/linux/kernel.h:595:17: warning: comparison of distinct pointer types lacks a cas
(void) (&_min1 == &_min2); \
^
/home/enrico/acpi_call-git/src/acpi_call-build/acpi_call.c:48:27: note: in expansion of
int show_values = min(result->buffer.length, get_avail_bytes() / 6);
^
Building modules, stage 2.
MODPOST 1 modules
CC /home/enrico/acpi_call-git/src/acpi_call-build/acpi_call.mod.o
LD [M] /home/enrico/acpi_call-git/src/acpi_call-build/acpi_call.ko
make[1]: Leaving directory `/usr/src/linux-3.8.5-1-ARCH'
==> Entering fakeroot environment...
any idea on how to fix this?
many thanks!
enrico

same problem here.
I 've edited the PKGBUILD git repo with dkao's repo he fixed the build with this commit:
https://github.com/dkao/acpi_call/commi … dccd49caef
Now the module builds, but...
I think the pkgbuild in a bad shape, it isn't installing the kernel module.
I've tried a manual insmod and depmod -a with no luck.
Did something has changed with the module installation procedure using kmod? modules has to be signed or gz compressed?
EDIT:
well I've succeeded.
1) modify git repo to dkao's in git url
2) go to /tmp/yaourt-tmp-user/aur-acpi_call-git/src/acpi_call-build (before merging the package)
3) make install
4) depmod -a
5) turn_off_gpu.sh
Last edited by parad0x (2013-04-18 07:39:15)

Premier Elements will not start (needs latest graphic drivers) and HP says I have the latest drivers

AMD says I don't have the latest, but I need to download the latest from HP - and HP says I have the latest.
Is my only option to return the Premier and Photoshop Elements 12?
Is there an alternate mode that allows Premier Elements to work with somewhat older drivers with some degradation in rendering speed?
Is Premier Elements only intended for the latest computers? My laptop is 1.5 years old.
Thanks

selrahcllah
Thanks for the update. Sorry for the delayed response...got detoured.
What is your situation with regard to working in the Premiere Elements 12 workspace Expert, Quick, Expert Guided, or Quick Guided? Are the displays and editing opportunities all functioning at this time?
As for the Elements Organizer thumbnail display of your video....how did you import that file into the Elements Organizer..
a. did you import the video via the Editor workspace and then let the video be automatically placed in the Elements Organizer
or
b. did you import the video in the Elements Organizer via the Elements Organizer's File Menu/Get Photos and Videos from...
What are the video and audio compressions and file extension for this video with the blank Elements Organizer thumbnail?
The first thing to try is deleting the video from Elements Organizer. Then importing the video into a Premiere Elements 12 Expert project to get it into the Elements Organizer by the automatic route.
Do not forget to right click the Elements Organizer thumbnail and select Update Thumbnail when you see the thumbnail blank (no trace of the first frame of the video).
I am trying these non-chip routes right now to get them rule in or out. We could add creating a new catalog and deleting the Elements Organizer setting file, but let us see how you do on the rest in this post.
From what you wrote, it sounded like Adobe Help took you a long way and got Premiere Elements 12 working, for everything but the Elements Organizer thumbnail playback. Give them another chance when it comes to the chips on this. Ask for a supervisor if necessary.
Based on your expected reply to the questions and suggestions above, I think it practical to pursue the above rather than switch to another program at this time.
What do you think?
We will be watching for your progress.
Thanks.
ATR

MacBook touchpad and latest kernel

Hi everybody,
My first post! I'm having some problems with the latest release of the kernel (kernel26-2.6.24.4-1). After rebooting the system the touchpad doesn't work anymore (But yes with usb mouse). I been trying to reinstall the kernel26 package and synaptic but nothing, still same. My MacBook (white) is a Core 2 Duo 2.20GHz bought in December 2007.
xorg.conf (Synaptics section)
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev
# not using edge scrolling
Option "HorizEdgeScroll" "0"
Option "VertEdgeScroll" "0"
# use two finger scrolling
Option "VertTwoFingerScroll" "1"
Option "HorizTwoFingerScroll" "0" # set to 0 if you don't want horizontal scrolling
# scroll speed, lower is faster
Option "HorizScrollDelta" "10"
Option "VertScrollDelta" "10"
# minimum pressure motion factor
Option "PressureMotionMinZ" "10"
# touch and untouch thresholds, higher numbers if you like to push hard
Option "FingerLow" "10"
Option "FingerHigh" "20" # change to 30 or 40 if you like
# borders based on output from synclient
Option "LeftEdge" "20"
Option "RightEdge" "1200"
Option "TopEdge" "20
Option "BottomEdge" "370"
# speeds, smaller number for a slower mouse
Option "MinSpeed" "0.8" # 0.5 is very slow, 1.5 is very fast
Option "MaxSpeed" "1.2" # up to 1.5 works ok
Option "AccelFactor" "0.10"
# tap times, change to suit your tapping habits
Option "MaxTapMove" "100
Option "MaxTapTime" "100"
Option "MaxDoubleTapTime" "200"
# don't change these or two finger tap stops working
Option "TapButton2" "3"
Option "TapButton3" "2"
# must be commented out or normal tapping wont work
Option "TapButton1" "0"
# needed for disabled while typing fix
Option "SHMConfig" "true"
EndSection
mkinitcpio.conf
# MODULES="piix ide_disk reiserfs"
MODULES="ata_generic ata_piix"
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata keymap filesystems"
Any tip or help?
Thanks

I have a macbook with the same specs as yours and I'm not having any problems with the touchpad.
Do you have this in your ServerLayout section??
InputDevice "TouchPad" "SendCoreEvents"
also, I'm using /dev/input/mouse1 as the device instead of /dev/psaux
Section "InputDevice"
Identifier "TouchPad"
Driver "synaptics"
Option "SendCoreEvents"
#Option "Device" "/dev/input/by-id/usb-Apple_Computer_Apple_Internal_Keyboard_._Trackpad-mouse"
Option "Device" "/dev/input/mouse1"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
Option "SHMConfig" "true"
# How fast the two-finger scrolling scrolls. The lower, the faster.
Option "VertScrollDelta" "25"
Option "HorizScrollDelta" "25"
# Location of the touchpad edges, somewhat sane values
# that I found by testing. Xmin=0, Xmax=1216, Ymin=0,Ymax=387
Option "LeftEdge" "100"
Option "RightEdge" "1116"
Option "TopEdge" "50"
Option "BottomEdge" "337"
# Touch and "untouch" thresholds
Option "FingerLow" "25"
Option "FingerHigh" "50"
# We DO NOT want palm triggering middle/right mouse
# button events, so a tap has to be quite fast
Option "MaxTapTime" "400"
Option "MaxTapMove" "200"
Option "MaxDoubleTapTime" "600"
# Enable circular scrolling
Option "CircularScrolling" "on"
Option "CircScrollTrigger" "3"
# Enable vertical (right) edge scrolling with one finger
Option "VertEdgeScroll" "1"
# Enable horizontal (bottom) edge scrolling with one finger
Option "HorizEdgeScroll" "0"
# Disable two finger scrolling, as we have the edge scrolling enabled already
Option "VertTwoFingerScroll" "0"
Option "HorizTwoFingerScroll" "0"
# Left top corner of the touchpad shall be the middle mouse button
# Bottom buttons tend to get triggered accidentally.
Option "LTCornerButton" "2"
# Right top corner of the touchpad shall be the right mouse button
Option "RTCornerButton" "3"
# Disable bottom corners
Option "LBCornerButton" "0"
Option "RBCornerButton" "0"
# Fast taps
Option "FastTaps" "0"
# Disable tapping of the touchpad (excluding the corners, of course)
Option "TapButton1" "0"
Option "TapButton2" "0"
Option "TapButton3" "0"
# Movement speed settings
Option "MinSpeed" "0.2"
Option "MaxSpeed" "0.6"
Option "AccelFactor" "0.35"
# Palm detection. Does not seem to work on Macbook
Option "PalmDetect" "1"
Option "PalmMinWidth" "10" #1-15
Option "PalmMinZ" "200" #1-255
# Various other variables
Option "UpDownScrolling" "0"
Option "LeftRightScrolling" "0"
EndSection

MSI Graphics Drivers and Microsoft AntiSpyware

Microsoft have released an AntiSpyware Program today.
On downloading and running this program it came up with 1 Severe warning on my PC....which I may add has an MSI Motherboard and MSI Graphics Card.
It found in C:\windows\system32\winsys.exe
KCGame(RAT)
This is what is said:
KCGame
Type: RAT
Threat Level: Severe
Author: c0ldfyr3
Description: A Remote Administration Tool (RAT) is a Trojan type of software that when run, provides an attacker with the capability of remotely controlling a user's computer (victim) over the Internet. The attacker usually has full access to functions on the victim's computer. The victim's computer usually listens on the Internet for the attacker's commands.
Advice: This is an extremely high risk threat and should be removed immediately as to prevent harm to your computer or your privacy.
File Name: DOT Application
File Path: C:\windows\system32\winsys.exe
Publisher: NONE
File Size: 135168 bytes
Now I remember that DOT application is possibly the same as Dynamic Over-Clocking Technology which comes supplied with the Graphics card drivers from MSI.
What I would like is some re-assurance that this Trojan is not within this file which was possibly supplied for an MSI product.
Anyone from MSI able to confirm this?

This is Ok, over a year ago I mentioned it to my MSI contact about this and they obviously have not done anything to change the name.
It is being improperly identified.
I will tell them again...

Trying to update Graphics drivers...and others

Hello,
I am having a few issues with my laptop. Think I need to upgrade the graphics drivers. Possibly update other things as well. Doesn't seem like it's any of the basic "Windows Updates" either. When I download the Intel driver update, it tells me I need to go to the computer manufacturer...which of course is Toshiba...instead of thru them.
Any guidance? How do I update the graphic drivers and check for other updates, drivers or whatever else, for my Toshiba laptop?
Laptop = Satellite P55t - A5118 running on Intel i7.
Plz lemme know...thx.
Dom

Satellite P55t-A5118
Downloads here.
Get all your drivers from the Toshiba site above.
Many use the Toshiba application "Service Station" to alert them for updates. It's already on your computer, but the latest version can be obtained from here.
TOSHIBA Service Station
-Jerry

Graphic Drivers Issue- All-in-one PC

I have an All-in-one Compaq Presario CQ 1-1006L and I'm failing to play most 3-d games (eq Call of Duty Mordern Warfare 4) . I tried upgrading the graphic drivers and they're all up to date but still not working. Is it possible to change the Video card or to do anything to have the computer play such games. or it's a complete waste of time? What can i do to upgrade this particular computer if possible?
Thank you

Hello Elton_Phiri,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having difficulty playing 3d Games on your Compaq Presario All-in-One CQ1-1006L Desktop PC. I cannot find anything that indicates that your integrated graphics chip in your computer supports 3D so this is probably why you are having issues. You motherboard on the other hand does have two PCI Express x1 mini card sockets that you could use to install a separate graphics card that does support 3D graphics. It may require shopping around and I would advise you to keep in mind the power requirements cannot exceed your 65watt power supply without you having to replace that as well.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Update v460 switchable graphics drivers

I've tried to update the graphics drivers from nvidia and that completely screws up the switchable graphics functioning and pretty much the resolution goes to crap and I have to do a system revert to fix it. Does anybody know if lenovo has released updated switchable graphics drivers for the v460? because in many programs (games) it says to update the graphics drivers and the screen flickers and the computer becomes generally unusable.
thanks!

try to perform clean windows installation by pressing one key recover first.
then check if you have any issue with your graphic card, if not avoid updating drivers, if you do, just try to update drivers from the link below.
http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=287385

Movie Maker can't start, graphics card has latest drivers and Direct X10

Hi, I'm attempting to get Movie Maker to start on a 64 bit notebook which I believe has the correct specs and has latest video card drivers and direct X10 or 11, can't remember. How can I further troubleshoot this?
Bill

Hi,
Have you checked that your PC meets the minimum system requirements here:
http://explore.live.com/windows-live-essentials-system-requirements ?
Older graphics cards will often not support some of the newer technologies, even if if they have the latest drivers. Is this your issue?
Also, You may need to install DirectX 9.0c runtime components if you are running Windows 7. This will add some components necessary for programs that use older versions of DirectX, which includes Windows Live 2011 Photo Gallery and Movie Maker.
Download the full installer here:
http://go.microsoft.com/fwlink/?linkid=56511&clcid=0x409
Spencer
TechNet Community Support

R9 270X Gaming 2G, unable to use the latest drivers and Mantle

I just bought a R9 270X Gaming 2G S/N 602-V303-13SB1312109829-398
When I first got the R9 270X, I installed the latest AMD drivers with the full package.
Later I got the, what I found to be, notorious atimkdag.sys BSOD.
I recovered my system partition with Acronis from before I installed the GPU. And installed the drivers found on MSI website which are considerably older than those on AMD’s website. I have not had an atimkdag.sys BSOD since. In fact I think I am using Windows stock drivers as the driver version says 13.251.9001.0, and I think the MSI driver is 13.101.0.0. Not sure how that happened.
Now my understanding is that this GPU should be Mantle enabled, however using Star Swarm Stress Test, which includes Mantle testing, said it found no Mantle enabled GPU. Perhaps because I am using an older driver.
I read somewhere that atimkdag.sys BSOD is linked to AMD Catalyst Control Center. Since I never used that last time I had an AMD GPU, I have disabled it on start-up.
What do you guys think would be the best option here? How can I both enjoy the latest drivers and avoid the notorious atimkdag.sys BSOD. Or do you think I should just stick with the drivers I have, without Mantle enabled. I haven’t actually got any Mantle enabled games at the moment, but are planning to get it though.
It may or may not be important. But I upgraded from Windows 7 to Win 8 Pro then Win 8.1 Pro. Perhaps it is leftover sys files. I noticed in forums that the atimkdag.sys BSOD mostly hit Win 7 systems. Perhaps the reason I am not getting the BSOD now is simply that I am not using AMD Catalyst Control Center, as you would think that if it is left over from Win 7 it should affect both old and latest drivers, right.
Thanks

Please disregard my previous post asking for help.
This is also a message to other noobs like myself, read the F.A.Q. before you post anything in the forum. I read the F.A.Q. about how to update drivers, how to remove old driver fragments and followed it to the letter.
https://forum-en.msi.com/faq/article/where-can-i-download-vga-drivers-and-how-do-i-install-t
Now Mantle works and as for the atikmdag.sys BSOD, hopefully I will not experience this now that I completely uninstalled all previous driver files, using Driver Sweeper in Safe Mode. I do not see why I should.
If against odds it happens, then I will come back and ask you guys for help.
Thanks

Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro

Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoit

There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

Cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

Have you done any of the following?
http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
Repaired permissions & restarted your comp after the installations of the drivers?
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
What to do when you can't print
=============
not working with OS X yosemite 10.10.1
Per your profile
Mac OS X (10.7.3)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

I need sound drivers and graphic drivers to my dv2278ea pavillion notebook

Hi there
i am using this Hp pavillion dv2278ea
I borrowed this from my brother
it had Windows 7 installed
the issue was speakers continued sounding even after Headohines are jacked in.
So i downgraded my laptop to Vista Home premium Sp 2.
Now even bigger problem approached.
i am unable to install sound drivers( the hp support is showing the drivers ,i have tried all but none of it is working
Sound Device name=High definition Audio device
Manufacturer= Microsoft
None of the following drivers are working
cognixent high definition audio(error = could not find media for this driver)
MUaa
and yes even Graphic drivers all suggested are not installing
Nvidia MCP(error=it say you are playing 32bit on 64bits)
Please suggest me proper drivers that work
thanks in advance

Try this:
http://www.ma-config.com/en
good luck.

Graphic drivers and latest kernel

Similar Messages

Maybe you are looking for