Graphic Frame can not be renamed

FM-11 and FM-12: In the Object Properties there is no more a field Name. Hence a graphic frame on the reference pages can not be checked for its name or the name can not be edited.
I have filed this as a bug.
The dialogue in FM-12 and FM-11:
In FM-10 there was the old dialogue still active which contained this information:

Klaus,
Actually you can, but it's not properly documented. When you select the Graphics Frame, it's name shows in the Status Bar. You are then supposed to click on the name in the Status bar to get the Frame Name window in order to change it. [There are other operations that also now have this non-intuitve user-be-damned approach.] Why it's not part of the Graphics Frame Properties is a mystery that was pointed out numerous times during the pre-release programs for 11 & 12 [but I guess it was too great of an effort to rectify something that was coded without the benefit of end-user input].

Similar Messages

My old itunes id was an email that no longer can be used, therefore, I can not change the password for that account. Everything that I purchased under that id name will not play. How can I fix this?

My old itunes id was an email that no longer can be used, therefore, I can not change the password for that account. Everything that I purchased under that id name will not play. How can I fix this?

I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See Changing the name you use for your Apple ID if you'd like more information.
Note: @mac.com and @me.com Apple IDs can not be renamed. If you no longer use the .mac or .me email address be sure to add your valid email address as an additional email address.
From here > http://support.apple.com/kb/HT5622?viewlocale=en_US
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Can not create workspace.xml OSX

Hello I just installed after effects CS5 trial on my Mac. Although it will unfortunatly not load. The installation process was fine, and I used adobe cleaner to remove my old CS4 after effects so there would be no issues.
When I go to open it I am gretted with an error message saying it can not rewtie/rename or create the file Workspaces.xml

What Mylenium suggested should work. But, if it doesn't you can also safely delete the entire preferences folder (Preferences/AdobeAfter Effects/10.0). When you restart After Effects, it will rebuild the preferences files to their default state.

SharePoint 2010 - Mysites documents CAN'T BE Renamed

Hi there
Documents in "Shared Documents" or "Private Documents" libraries CAN NOT be renamed, selecting the "Edit Properties" & entering the Name & selecting the "Save" button does nothing. The modal dialog stays without
closing or renaming the document.
Help appreciated.
Thanks,
Apriori algorithm [association rule]

Hi Sukumar,
it looks really strange. Try to rename the documents on the "Explorer view" and tell us if it's working.
Best regards.

Vista can not detect my graphic card ATI HD2600 on Satellite A210-128

Hallo,
Can someone help me with this issue?
I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
What to do????
It is something special with the DVD that i have from Toshiba ?????
Thank you very much.

Hi
> I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
The whole issue is really mysterious. In my opinion there are two options;
Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
Furthermore I found you second posting in other thread
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
and I think more and more that this must be an graphic card issue.

How can we place an image in already created inline graphic frame?

Hi,
AIM::
To place an image in the inline graphic frame.
OBSERVATION::
As i have analysed the snippet Runner,i came to know that it allows to load the placegun with the file(in my case image). but in order to place it,we need to click on the document..and then the image is placed at (0,0) of the page(I suppose Indesign does it automatically).
what is needed,is to place image in already created inline graphic frame. i have created a inline graphic frame at some position in the story,but now i required to place image in this created frame.

I have the same problem. Can you give me a short code sample for that.
I have an image and want to place it in the currently selected frame...

HT1657 after renting a move and starting viewing I can not stop it and come back to in within the time frame. If i stop it it goes away not able to find it. Just like I did not rent it at all.

after renting a move and starting viewing I can not stop it and come back to in within the time frame. If i stop it it goes away not able to find it. Just like I did not rent it at all.

Hi,
We have rolled out a fix for this issue.
Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
Please let us know if you still face any issues.
Thanks,
Ashu Mittal

Dell Studio 17 Graphic Card is not performing well, Can I update the driver

I just purchased Dell Studio s17-169B. The graphic card in this laptop is Intel Graphics Media Accelerator 4500MHD. However, when I check graphic driver through device manager, I have found that driver is for Mobile Intel 4 series express chipset family with version 7.15.10.1576. My question is: can I download Dell Studio 1737 Intel Mobile Graphics Media Accelerator 4500MHD Driver A03 to update my current gtaphic driver so that the graphic display can be improved? Otherwise, I may return this laptop back to Bestbuy. Thanks for your input.

Define "not performing well"...
If you're playing 3D games, you will find that the 4500MHD is going to be lacking in general regardless of the driver installed. Any Intel GMA series integrated graphics solution is going to be at the bottom of the barrel in terms of 3D performance. In most cases, the only thing worse than a GMA series accelerator is an older GMA series accelerator.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

I have a new ipad mini purchased in Dec 2013. I can not Picture Frame app to display my photos when the ipad screen is locked. was this feature removed? if not, how do I turn it on?

I have a new ipad mini purhased in December 2013 for my father. I want play the streamed photos on the ipad when the screen is locked. Similar to what the ipad 2 using Picture Frame. Unfortunately I can not find the picture frame app on this ioad mini. Was this feature removed? If yes, are there alternative options?

I can't personally as I never really liked nor used the picture frame feature in iPad. Just search in the App Store and read customer reviews and you'll likely find something you'll like.

I can not import videos frames to layers.

I can not import videos frames to layers. ( I do have QuickTime )

You may whant to look at your windows creash reports to see where CS4 is crashing, It may help you find a solution if there is one.
Photoshop is not designed as a video editor. Video is more or less and add on.
Photoshop video support was also significantly enhances in CS6. While there is still support for menu File>Import>Video Frames to layers. Its not the best way to get video into Photoshop. Even dropping a quicktime file onto Photoshop is better. I find the best way to get video into Photoshop is using the Video Timeline add media into. Its quicker, You have better control of selecting the frames you want, And you can turn a video timeline into layers and a frame animation if that is what you want to work on.
If you want to do video get a lost cost video editor like Premier Elements. If you just want do do simple video editing spring for CS6 or subscribe to the cloud. CS6 will set you back some $700 for Standard $1000 for extended. Where $10 a month will get you the cloud. Where your get Photoshop Extended and can also use LR. I do not use LR or do video editing. I get the cloud mostly for the improvements being made to ACR and ACR in Cloud Photoshop is a Filter in addition of being a Photoshop and Bridge Plug-in.
Frame Animations and video timeline can be save for web as animated poor choice for video or large frame animation. They can also be rendered out as video. Video file sized are much smaller then Animated GIF have better color and can contain audio as well. Here the 1920x1080 Gif file size was nearly 29MB where the High Quality mp4 with audio was about 6MB.
View Screen capture in new tab or browser window the site scale screen captures very poorly at times.
`
http://www.mouseprints.net/old/dpr/slide.mp4

Can not place any graphic in Illustrator CS6

I try to place a jpg or psd graphic inside a normal Illustrator document. Illustrator tells me the graph has no color profile (what is not correct - it has) but whatever option I choose nothing happens - no graphic is placed, I get no cursor to place the graphic. Or Illustrator just crashes. This used to work just fine in earlier version... I use CS6 cloud version.
Any help greatly appreciated!
Thanks.

I tried several color settings, I checked with the color tool if profiles are damaged but the ones I use did were not listed, I removed the preference files... nothing. Either Illustrator is just crashing or it says for every file that it has no profile but then just nothing further is happening.
The only way I found to get a picture into Illustrator is to place it within InDesign (that works normal) and then copy / paste it to Illustrator.
Maybe this is a Mountain Lion problem? I can not remember having those problems on Lion.

Satellite M60: can not install the newest driver for my graphic card

Can not install newest driver for my graphic card
Satellite M60
ATI MOBILITY RADEON X700

Hello
First of all I really dont understand why you start two topics with the same theme. It is much better to have one topic with good content and interesting comments. Am I right? ;)
Anyway, in your case it is interesting that Toshiba use adapted drivers because of hardware protection. That means that graphic card will not be forced to run at the maximum level. Hardware cooling in notebooks is very problematic and high temperature can result with overheating or hardware damage. All hardware components are placed on small place. Graphic card produce a lot of warmness and it is not so good for all other hardware.
When you use non-Toshiba driver graphic card will be forced to run faster. Because of that every notebook manufacturers dont support usage of third part drivers. The fact is that hardware protection is priority.
I didnt make any experiments but according to some reports on this forum there is way how to install non-Toshiba graphic card driver.
Please check this forum and you will find many comments about that. One interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

Can not start frame 11

dear all
i don't know what is wrong with my frame 11. until yesterday i had frame 10, 11 and 12 installed parallel on my win7 x64 machine. all of a sudden the creative cloud thingy came up and prompted me to login, etc. after that frame 10-12 didn't work anymore. i received the cryptic internal errors. happend already couple of times, i then ran the installers again and frame 10 & 12 worked after that. only frame 11 is still not functioning. i can start it, select wether structured or unstructred and that's it. it pops up quickly in the taskmanager but then disappears. latest updates are applied. deleting local maker.ini just brings the dialogue again. no effect after i made a decision. frame 11 refuses to start.
i then deleted all frames and cleansed the registry by hand (i know what i am doing!), tried to reinstall just frame 11 - no success.
now i start to wonder if my installer is corrupt somehow. can not find frame 11 or TCS4 anywhere to download. it's all gone.
any clues or hints are highly appreciated.
thanks.
chris.

According to any number of prior responses to questions like these, the answer is: "Call Adobe Support. Support calls regarding installation issues are free."

Windows 10 work around. Graphics issue. Can not get icon

This is not a question,but a solution: I am not sure if this has been posted yet. I have a 7 year old laptop that was running on Vista when I purchased it. a couple years later I was working for Staples and was able to get a free copy of Windows 7. I was frustrated when I found out that I could not get a updated graphic's driver and Microsoft said that my pc was not compatible. Frustrated that my laptop will soon be obsolete and that HP no longer supports it, I searched for a solution. I came across the article yesterday and downloaded and installed Windows 10 last night. The only problem so far was that I had to change the display settings and I get a error message at boot-up (that I can make go away). Outside of that,the pc runs fine and maybe now I'll get another 4 or 5 years out of it. Here is the article for those interested. pcadvisor.co.uk/how-to/windows/how-install-windows-10-now-upgrade-gwx-3575135/

For both of you, what connector are you using to connect the projector, VGA, DVI, TV etc?
One thing with the Intel integrated graphics card is that you need to have external displays attached while booting to get them recognized. But it seems you are both doing this as you see the Windows icon. Another important thing is to make sure you are not going over the max resolution for the external display. You need to use the Intel graphics selection in the system tray tool bar (down right of the screen) to set the right resolution. Note also that you can not boot with the MacBook(Air) lid closed as lid closed is not supported in Windows.

Wireless card can not find any network.

I have 2 wireless card:
TP-Link PCI card:TL-WN851N
D-Link USB card:DWA-127
both card work fine under windows.
but TP-Link can not find any wireless network,even if I moved my wirelss router to same room with TP-Link wireless card.
Anybody have an idea ?
I comfirmed the kernel driver is properly loaded:
[root@XSign ~]# lspci -k
04:00.0 Network controller: Qualcomm Atheros AR9227 Wireless Network Adapter (rev 01)
Subsystem: Qualcomm Atheros Device 0300
Kernel driver in use: ath9k
Kernel modules: ath9k
[root@XSign ~]# ifconfig -a
//this is D-Link card
wlp0s20u11: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.2.101 netmask 255.255.255.0 broadcast 255.255.255.255
inet6 fe80::bef6:85ff:fe67:57c prefixlen 64 scopeid 0x20<link>
ether bc:f6:85:67:05:7c txqueuelen 1000 (Ethernet)
RX packets 171436 bytes 230296030 (219.6 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 107153 bytes 12458452 (11.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
//this is TP-Link card
wlp4s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 08:57:00:34:4f:c5 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@XSign ~]# ifconfig wlp4s0 up
[root@XSign ~]# iwlist wlp4s0 scan
wlp4s0 No scan results
and I can find many wireless network with same command through card wlp0s20u11
AR9227 is supported : http://wireless.kernel.org/en/users/Drivers/ath9k/

Thanks for reply.
one more thing, I noticed the power LED didn't "light up" when I execute the "power up" command.
[root@XSign hacksign]# ip link show wlp4s0
3: wlp4s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 08:57:00:34:4f:c5 brd ff:ff:ff:ff:ff:ff
[root@XSign hacksign]# ip link set wlp4s0 up
[root@XSign hacksign]# ip link show wlp4s0
3: wlp4s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 08:57:00:34:4f:c5 brd ff:ff:ff:ff:ff:ff
[root@XSign hacksign]# dmesg | grep firmware
[root@XSign hacksign]#
any suggesstions ?
below is my complete demsg output:
[root@XSign hacksign]# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=08871484-d630-41f6-a743-4086ad9f8628 rw noisy init=/usr/lib/systemd/systemd nomodeset
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb231fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb232000-0x00000000bb238fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb239000-0x00000000bc247fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bc248000-0x00000000bc74dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bc74e000-0x00000000ce799fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ce79a000-0x00000000ce9adfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ce9ae000-0x00000000cea93fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cea94000-0x00000000cf7fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. G1.Sniper B5/G1.Sniper B5-CF, BIOS F6 01/17/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0220000000 mask 7FF8000000 write-back
[ 0.000000] 3 base 0228000000 mask 7FFC000000 write-back
[ 0.000000] 4 base 022C000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 6 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd710-0x000fd71f] mapped at [ffff8800000fd710]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22de00000-0x22dffffff]
[ 0.000000] [mem 0x22de00000-0x22dffffff] page 2M
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22ddfffff]
[ 0.000000] [mem 0x22c000000-0x22ddfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbb231fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbb1fffff] page 2M
[ 0.000000] [mem 0xbb200000-0xbb231fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb239000-0xbc247fff]
[ 0.000000] [mem 0xbb239000-0xbb3fffff] page 4k
[ 0.000000] [mem 0xbb400000-0xbc1fffff] page 2M
[ 0.000000] [mem 0xbc200000-0xbc247fff] page 4k
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbc74e000-0xce799fff]
[ 0.000000] [mem 0xbc74e000-0xbc7fffff] page 4k
[ 0.000000] [mem 0xbc800000-0xce5fffff] page 2M
[ 0.000000] [mem 0xce600000-0xce799fff] page 4k
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcf7ff000-0xcf7fffff]
[ 0.000000] [mem 0xcf7ff000-0xcf7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x379c0000-0x37cd7fff]
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CEA6C078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CEA77460 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CEA6C188 00B2D7 (v02 ALASKA A M I 000000F6 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000CEA92080 000040
[ 0.000000] ACPI: APIC 0x00000000CEA77570 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CEA775E8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CEA77630 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CEA77B70 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000CEA78648 00003C (v01 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CEA78688 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CEA786C0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CEA78A30 003299 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: DMAR 0x00000000CEA7BCD0 000080 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022dffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22dffffff]
[ 0.000000] NODE_DATA [mem 0x22dff6000-0x22dffafff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880225600000-ffff88022d5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22dffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbb231fff]
[ 0.000000] node 0: [mem 0xbb239000-0xbc247fff]
[ 0.000000] node 0: [mem 0xbc74e000-0xce799fff]
[ 0.000000] node 0: [mem 0xcf7ff000-0xcf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x22dffffff]
[ 0.000000] On node 0 totalpages: 2081322
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13131 pages used for memmap
[ 0.000000] DMA32 zone: 840334 pages, LIFO batch:31
[ 0.000000] Normal zone: 19328 pages used for memmap
[ 0.000000] Normal zone: 1236992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb232000-0xbb238fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbc248000-0xbc74dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce79a000-0xce9adfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce9ae000-0xcea93fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcea94000-0xcf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022dc00000 s87168 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s87168 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2048778
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=08871484-d630-41f6-a743-4086ad9f8628 rw noisy init=/usr/lib/systemd/systemd nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8112620K/8325288K available (5222K kernel code, 885K rwdata, 1644K rodata, 1116K init, 1284K bss, 212668K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3192.796 MHz processor
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6388.65 BogoMIPS (lpj=10642653)
[ 0.000023] pid_max: default: 32768 minimum: 301
[ 0.000027] ACPI: Core revision 20140214
[ 0.007164] ACPI: All ACPI Tables successfully acquired
[ 0.008322] Security Framework initialized
[ 0.008326] Yama: becoming mindful.
[ 0.008691] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010281] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010989] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.010996] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.011160] Initializing cgroup subsys memory
[ 0.011162] Initializing cgroup subsys devices
[ 0.011164] Initializing cgroup subsys freezer
[ 0.011165] Initializing cgroup subsys net_cls
[ 0.011166] Initializing cgroup subsys blkio
[ 0.011180] CPU: Physical Processor ID: 0
[ 0.011181] CPU: Processor Core ID: 0
[ 0.011958] mce: CPU supports 9 MCE banks
[ 0.011969] CPU0: Thermal monitoring enabled (TM1)
[ 0.011978] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
[ 0.012042] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[ 0.012591] ftrace: allocating 20223 entries in 79 pages
[ 0.018707] dmar: Host address width 39
[ 0.018709] dmar: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.018715] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.018716] dmar: RMRR base: 0x000000ce92c000 end: 0x000000ce938fff
[ 0.018781] IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.018781] HPET id 0 under DRHD base 0xfed90000
[ 0.018782] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.018855] Enabled IRQ remapping in x2apic mode
[ 0.018856] Enabling x2apic
[ 0.018856] Enabled x2apic
[ 0.018860] Switched APIC routing to cluster x2apic.
[ 0.019222] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052254] smpboot: CPU0: Intel(R) Core(TM) i5-4460 CPU @ 3.20GHz (fam: 06, model: 3c, stepping: 03)
[ 0.052259] TSC deadline timer enabled
[ 0.052264] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.052268] ... version: 3
[ 0.052269] ... bit width: 48
[ 0.052270] ... generic registers: 8
[ 0.052270] ... value mask: 0000ffffffffffff
[ 0.052271] ... max period: 0000ffffffffffff
[ 0.052271] ... fixed-purpose events: 3
[ 0.052272] ... event mask: 00000007000000ff
[ 0.079047] x86: Booting SMP configuration:
[ 0.079048] .... node #0, CPUs: #1
[ 0.093027] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.099712] #2 #3
[ 0.134308] x86: Booted up 1 node, 4 CPUs
[ 0.134310] smpboot: Total of 4 processors activated (25552.63 BogoMIPS)
[ 0.136937] devtmpfs: initialized
[ 0.138913] PM: Registering ACPI NVS region [mem 0xbb232000-0xbb238fff] (28672 bytes)
[ 0.138915] PM: Registering ACPI NVS region [mem 0xce9ae000-0xcea93fff] (942080 bytes)
[ 0.139415] pinctrl core: initialized pinctrl subsystem
[ 0.139443] RTC time: 11:10:27, date: 06/26/14
[ 0.139466] NET: Registered protocol family 16
[ 0.139522] cpuidle: using governor ladder
[ 0.139522] cpuidle: using governor menu
[ 0.139531] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.139532] ACPI: bus type PCI registered
[ 0.139533] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.139569] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.139570] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.143859] PCI: Using configuration type 1 for base access
[ 0.144410] ACPI: Added _OSI(Module Device)
[ 0.144411] ACPI: Added _OSI(Processor Device)
[ 0.144412] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.144413] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.147021] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.148606] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.161070] ACPI: SSDT 0x00000000CE9A3C18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.161369] ACPI: Dynamic OEM Table Load:
[ 0.161370] ACPI: SSDT 0x0000000000000000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.174502] ACPI: SSDT 0x00000000CE9A3618 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.174917] ACPI: Dynamic OEM Table Load:
[ 0.174918] ACPI: SSDT 0x0000000000000000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.184454] ACPI: SSDT 0x00000000CE9A2D98 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.184763] ACPI: Dynamic OEM Table Load:
[ 0.184765] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.194062] ACPI: Interpreter enabled
[ 0.194068] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.194072] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.194082] ACPI: (supports S0 S3 S4 S5)
[ 0.194083] ACPI: Using IOAPIC for interrupt routing
[ 0.194102] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.199374] ACPI: Power Resource [FN00] (off)
[ 0.199419] ACPI: Power Resource [FN01] (off)
[ 0.199463] ACPI: Power Resource [FN02] (off)
[ 0.199506] ACPI: Power Resource [FN03] (off)
[ 0.199551] ACPI: Power Resource [FN04] (off)
[ 0.199896] ACPI: \_PR_.CPU4: failed to get CPU APIC ID.
[ 0.199899] ACPI: \_PR_.CPU5: failed to get CPU APIC ID.
[ 0.199901] ACPI: \_PR_.CPU6: failed to get CPU APIC ID.
[ 0.199903] ACPI: \_PR_.CPU7: failed to get CPU APIC ID.
[ 0.200027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.200030] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.200156] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.200234] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.200577] PCI host bridge to bus 0000:00
[ 0.200579] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.200581] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.200582] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.200583] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.200584] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.200585] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.200586] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.200587] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.200587] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.200588] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.200589] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff]
[ 0.200595] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.200653] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.200679] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.200711] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.200755] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.200771] pci 0000:00:14.0: reg 0x10: [mem 0xf3220000-0xf322ffff 64bit]
[ 0.200822] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.200847] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.200874] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.200890] pci 0000:00:16.0: reg 0x10: [mem 0xf323c000-0xf323c00f 64bit]
[ 0.200945] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.200993] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
[ 0.201006] pci 0000:00:16.3: reg 0x10: [io 0xf0a0-0xf0a7]
[ 0.201013] pci 0000:00:16.3: reg 0x14: [mem 0xf323a000-0xf323afff]
[ 0.201114] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[ 0.201128] pci 0000:00:19.0: reg 0x10: [mem 0xf3200000-0xf321ffff]
[ 0.201135] pci 0000:00:19.0: reg 0x14: [mem 0xf3239000-0xf3239fff]
[ 0.201141] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.201192] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.201219] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.201246] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.201264] pci 0000:00:1a.0: reg 0x10: [mem 0xf3238000-0xf32383ff]
[ 0.201342] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.201378] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.201405] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.201416] pci 0000:00:1b.0: reg 0x10: [mem 0xf3230000-0xf3233fff 64bit]
[ 0.201476] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.201503] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.201526] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.201583] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.201611] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.201635] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[ 0.201692] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.201720] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.201750] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.201768] pci 0000:00:1d.0: reg 0x10: [mem 0xf3237000-0xf32373ff]
[ 0.201847] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.201883] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.201910] pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100
[ 0.202046] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.202058] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.202064] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.202070] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.202076] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.202081] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.202087] pci 0000:00:1f.2: reg 0x24: [mem 0xf3236000-0xf32367ff]
[ 0.202118] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.202161] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.202173] pci 0000:00:1f.3: reg 0x10: [mem 0xf3235000-0xf32350ff 64bit]
[ 0.202190] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.202273] pci 0000:01:00.0: [10de:11c0] type 00 class 0x030000
[ 0.202282] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
[ 0.202291] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.202300] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.202306] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.202312] pci 0000:01:00.0: reg 0x30: [mem 0xf3000000-0xf307ffff pref]
[ 0.202361] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.202388] pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
[ 0.202397] pci 0000:01:00.1: reg 0x10: [mem 0xf3080000-0xf3083fff]
[ 0.208685] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.208687] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.208689] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf30fffff]
[ 0.208737] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.208807] pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
[ 0.208933] pci 0000:03:00.0: supports D1 D2
[ 0.208934] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208954] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.208973] pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.208977] pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.208981] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.208982] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.208983] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.208984] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.208985] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.208986] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.208987] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.208988] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.208989] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.208990] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
[ 0.209061] pci 0000:04:00.0: [168c:002d] type 00 class 0x028000
[ 0.209095] pci 0000:04:00.0: reg 0x10: [mem 0xf3100000-0xf310ffff]
[ 0.209351] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.209364] pci 0000:03:00.0: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.209373] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.209374] pci 0000:03:00.0: bridge window [mem 0xf3100000-0xf31fffff] (subtractive decode)
[ 0.209375] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.209376] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.209377] pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.209378] pci 0000:03:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.209379] pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.209380] pci 0000:03:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.209381] pci 0000:03:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.209382] pci 0000:03:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.209383] pci 0000:03:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.209384] pci 0000:03:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.209385] pci 0000:03:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.209386] pci 0000:03:00.0: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
[ 0.209408] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.209784] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.209814] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.209842] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.209869] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.209897] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.209925] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.209954] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.209982] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.210114] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.210172] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.210173] vgaarb: loaded
[ 0.210173] vgaarb: bridge control possible 0000:01:00.0
[ 0.210188] PCI: Using ACPI for IRQ routing
[ 0.211404] PCI: pci_cache_line_size set to 64 bytes
[ 0.211442] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.211443] e820: reserve RAM buffer [mem 0xbb232000-0xbbffffff]
[ 0.211444] e820: reserve RAM buffer [mem 0xbc248000-0xbfffffff]
[ 0.211445] e820: reserve RAM buffer [mem 0xce79a000-0xcfffffff]
[ 0.211446] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
[ 0.211446] e820: reserve RAM buffer [mem 0x22e000000-0x22fffffff]
[ 0.211499] NetLabel: Initializing
[ 0.211500] NetLabel: domain hash size = 128
[ 0.211500] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.211507] NetLabel: unlabeled traffic allowed by default
[ 0.211519] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.211523] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.213540] Switched to clocksource hpet
[ 0.216475] pnp: PnP ACPI init
[ 0.216483] ACPI: bus type PNP registered
[ 0.216524] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.216527] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.216533] pnp 00:01: [dma 4]
[ 0.216544] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.216555] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.216614] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.216684] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.216686] system 00:04: [io 0xffff] has been reserved
[ 0.216687] system 00:04: [io 0xffff] has been reserved
[ 0.216688] system 00:04: [io 0xffff] has been reserved
[ 0.216689] system 00:04: [io 0x1c00-0x1cfe] has been reserved
[ 0.216690] system 00:04: [io 0x1d00-0x1dfe] has been reserved
[ 0.216691] system 00:04: [io 0x1e00-0x1efe] has been reserved
[ 0.216692] system 00:04: [io 0x1f00-0x1ffe] has been reserved
[ 0.216693] system 00:04: [io 0x1800-0x18fe] could not be reserved
[ 0.216695] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.216696] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.216715] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.216745] system 00:06: [io 0x1854-0x1857] has been reserved
[ 0.216746] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.216822] system 00:07: [io 0x0a00-0x0a0f] has been reserved
[ 0.216823] system 00:07: [io 0x0a30-0x0a3f] has been reserved
[ 0.216824] system 00:07: [io 0x0a20-0x0a2f] has been reserved
[ 0.216825] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.216983] pnp 00:08: [dma 0 disabled]
[ 0.217013] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.217187] pnp 00:09: [dma 0 disabled]
[ 0.217255] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.217285] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.217286] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217303] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.217561] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.217562] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.217563] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.217564] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.217566] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.217567] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.217568] system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.217569] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.217570] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 0.217572] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.217573] system 00:0c: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.217574] system 00:0c: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.217575] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217728] pnp: PnP ACPI: found 13 devices
[ 0.217729] ACPI: bus type PNP unregistered
[ 0.223413] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.223415] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.223417] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf30fffff]
[ 0.223421] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.223429] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.223436] pci 0000:03:00.0: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.223448] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[ 0.223452] pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.223458] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.223459] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.223460] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.223461] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.223462] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.223463] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.223464] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.223465] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.223466] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.223467] pci_bus 0000:00: resource 13 [mem 0xd0000000-0xfeafffff]
[ 0.223468] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.223469] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xf30fffff]
[ 0.223470] pci_bus 0000:03: resource 1 [mem 0xf3100000-0xf31fffff]
[ 0.223471] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.223472] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.223473] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.223474] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.223475] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.223476] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.223477] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.223478] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.223479] pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.223480] pci_bus 0000:03: resource 13 [mem 0xd0000000-0xfeafffff]
[ 0.223481] pci_bus 0000:04: resource 1 [mem 0xf3100000-0xf31fffff]
[ 0.223482] pci_bus 0000:04: resource 5 [mem 0xf3100000-0xf31fffff]
[ 0.223483] pci_bus 0000:04: resource 8 [io 0x0000-0x0cf7]
[ 0.223484] pci_bus 0000:04: resource 9 [io 0x0d00-0xffff]
[ 0.223485] pci_bus 0000:04: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.223486] pci_bus 0000:04: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.223487] pci_bus 0000:04: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.223488] pci_bus 0000:04: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.223489] pci_bus 0000:04: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.223490] pci_bus 0000:04: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.223491] pci_bus 0000:04: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.223492] pci_bus 0000:04: resource 17 [mem 0xd0000000-0xfeafffff]
[ 0.223506] NET: Registered protocol family 2
[ 0.223609] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.223730] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.223895] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.223910] TCP: reno registered
[ 0.223917] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.223944] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.223988] NET: Registered protocol family 1
[ 0.256980] pci 0000:01:00.0: Boot video device
[ 0.256994] PCI: CLS 64 bytes, default 64
[ 0.257020] Unpacking initramfs...
[ 0.294705] Freeing initrd memory: 3168K (ffff8800379c0000 - ffff880037cd8000)
[ 0.294716] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.294717] software IO TLB [mem 0xca79a000-0xce79a000] (64MB) mapped at [ffff8800ca79a000-ffff8800ce799fff]
[ 0.294842] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.294863] Scanning for low memory corruption every 60 seconds
[ 0.294994] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.303763] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.304553] zbud: loaded
[ 0.304660] VFS: Disk quotas dquot_6.5.2
[ 0.304681] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.304745] msgmni has been set to 15851
[ 0.304773] Key type big_key registered
[ 0.304856] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.304885] io scheduler noop registered
[ 0.304886] io scheduler deadline registered
[ 0.304909] io scheduler cfq registered (default)
[ 0.305005] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
[ 0.305115] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.305124] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.305139] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.305140] vesafb: scrolling: redraw
[ 0.305141] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.305727] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90004e80000, using 8128k, total 8128k
[ 0.421564] Console: switching to colour frame buffer device 240x67
[ 0.536923] fb0: VESA VGA frame buffer device
[ 0.536932] intel_idle: MWAIT substates: 0x42120
[ 0.536933] intel_idle: v0.4 model 0x3C
[ 0.536934] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.537045] GHES: HEST is not enabled!
[ 0.537073] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.557614] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.578155] 0000:00:16.3: ttyS1 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A
[ 0.578323] Linux agpgart interface v0.103
[ 0.578347] rtc_cmos 00:05: RTC can wake from S4
[ 0.578460] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.578493] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.578499] Intel P-state driver initializing.
[ 0.578506] Intel pstate controlling: cpu 0
[ 0.578516] Intel pstate controlling: cpu 1
[ 0.578525] Intel pstate controlling: cpu 2
[ 0.578533] Intel pstate controlling: cpu 3
[ 0.578547] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.578599] TCP: cubic registered
[ 0.578655] NET: Registered protocol family 10
[ 0.578791] NET: Registered protocol family 17
[ 0.579032] registered taskstats version 1
[ 0.579379] Magic number: 2:735:176
[ 0.579408] acpi device:39: hash matches
[ 0.579414] acpi device:0c: hash matches
[ 0.579465] rtc_cmos 00:05: setting system clock to 2014-06-26 11:10:28 UTC (1403781028)
[ 0.579516] PM: Hibernation image not present or could not be loaded.
[ 0.579998] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
[ 0.579999] Write protecting the kernel read-only data: 8192k
[ 0.581473] Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
[ 0.582105] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
[ 0.586339] random: systemd-tmpfile urandom read with 65 bits of entropy available
[ 0.587122] systemd-udevd[58]: starting version 213
[ 0.595903] ACPI: bus type USB registered
[ 0.595926] usbcore: registered new interface driver usbfs
[ 0.595933] usbcore: registered new interface driver hub
[ 0.596405] usbcore: registered new device driver usb
[ 0.596719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.596815] ehci-pci: EHCI PCI platform driver
[ 0.596919] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.596924] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.596934] ehci-pci 0000:00:1a.0: debug port 2
[ 0.597169] SCSI subsystem initialized
[ 0.598545] libata version 3.00 loaded.
[ 0.600825] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.600841] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3238000
[ 0.600943] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.601297] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.601307] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.610538] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.610659] hub 1-0:1.0: USB hub found
[ 0.610663] hub 1-0:1.0: 2 ports detected
[ 0.610845] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.610849] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.610858] ehci-pci 0000:00:1d.0: debug port 2
[ 0.614752] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.614762] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3237000
[ 0.623945] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.624126] hub 2-0:1.0: USB hub found
[ 0.624130] hub 2-0:1.0: 2 ports detected
[ 0.624306] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.624310] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.624428] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.624442] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.624616] hub 3-0:1.0: USB hub found
[ 0.624632] hub 3-0:1.0: 12 ports detected
[ 0.625905] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.625908] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.626071] hub 4-0:1.0: USB hub found
[ 0.626082] hub 4-0:1.0: 6 ports detected
[ 0.626739] ahci 0000:00:1f.2: version 3.0
[ 0.626827] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.626869] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 0.626871] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.631106] scsi0 : ahci
[ 0.631237] scsi1 : ahci
[ 0.631544] scsi2 : ahci
[ 0.631847] scsi3 : ahci
[ 0.632048] scsi4 : ahci
[ 0.632210] scsi5 : ahci
[ 0.632245] ata1: SATA max UDMA/133 abar m2048@0xf3236000 port 0xf3236100 irq 43
[ 0.632247] ata2: SATA max UDMA/133 abar m2048@0xf3236000 port 0xf3236180 irq 43
[ 0.632247] ata3: DUMMY
[ 0.632248] ata4: DUMMY
[ 0.632249] ata5: DUMMY
[ 0.632249] ata6: DUMMY
[ 0.917514] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.950851] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.950865] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.951513] ata2.00: ATA-9: WDC WD10EZEX-08M2NA0, 01.01A01, max UDMA/100
[ 0.951515] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.952272] ata2.00: configured for UDMA/100
[ 0.965729] ata1.00: ATA-8: KINGSTON SV300S37A120G, 527ABBF0, max UDMA/133
[ 0.965731] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.975526] ata1.00: configured for UDMA/133
[ 0.975682] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 527A PQ: 0 ANSI: 5
[ 0.976133] scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-08M 01.0 PQ: 0 ANSI: 5
[ 0.979123] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 0.979131] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.979133] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 0.979142] sd 0:0:0:0: [sda] Write Protect is off
[ 0.979144] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.979150] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.979241] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.979242] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.979260] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.979452] sda: sda1 sda2 sda3
[ 0.979690] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.992405] sdb: sdb1 sdb2 sdb3 sdb4
[ 0.992837] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.041522] hub 1-1:1.0: USB hub found
[ 1.041639] hub 1-1:1.0: 6 ports detected
[ 1.147659] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.271718] hub 2-1:1.0: USB hub found
[ 1.271809] hub 2-1:1.0: 6 ports detected
[ 1.297769] tsc: Refined TSC clocksource calibration: 3192.606 MHz
[ 1.431263] usb 3-5: new low-speed USB device number 2 using xhci_hcd
[ 1.537046] random: nonblocking pool is initialized
[ 1.556157] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.587430] systemd[1]: systemd 214 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 1.587513] systemd[1]: Detected architecture 'x86-64'.
[ 1.588205] systemd[1]: Set hostname to <XSign>.
[ 1.614195] usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.626104] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.626132] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.626139] systemd[1]: Starting Remote File Systems.
[ 1.626581] systemd[1]: Reached target Remote File Systems.
[ 1.626590] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.626605] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.626610] systemd[1]: Starting Paths.
[ 1.626945] systemd[1]: Reached target Paths.
[ 1.626950] systemd[1]: Starting Encrypted Volumes.
[ 1.627363] systemd[1]: Reached target Encrypted Volumes.
[ 1.627373] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.628175] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.628182] systemd[1]: Expecting device dev-sdb4.device...
[ 1.628567] systemd[1]: Expecting device dev-sda1.device...
[ 1.628950] systemd[1]: Expecting device dev-sdb3.device...
[ 1.629332] systemd[1]: Starting Root Slice.
[ 1.632141] systemd[1]: Created slice Root Slice.
[ 1.632148] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.632697] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.632703] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 1.633212] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.633217] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.633664] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.633669] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.634133] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.634139] systemd[1]: Starting udev Control Socket.
[ 1.634558] systemd[1]: Listening on udev Control Socket.
[ 1.634564] systemd[1]: Starting udev Kernel Socket.
[ 1.634987] systemd[1]: Listening on udev Kernel Socket.
[ 1.634993] systemd[1]: Starting LVM2 metadata daemon socket.
[ 1.635469] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.635474] systemd[1]: Starting User and Session Slice.
[ 1.635984] systemd[1]: Created slice User and Session Slice.
[ 1.635990] systemd[1]: Starting Journal Socket.
[ 1.636382] systemd[1]: Listening on Journal Socket.
[ 1.636391] systemd[1]: Starting System Slice.
[ 1.636828] systemd[1]: Created slice System Slice.
[ 1.636837] systemd[1]: Started File System Check on Root Device.
[ 1.636841] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 1.637390] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.637397] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.638043] systemd[1]: Mounting Temporary Directory...
[ 1.639117] systemd[1]: Mounting Debug File System...
[ 1.639740] systemd[1]: Starting udev Coldplug all Devices...
[ 1.640987] systemd[1]: Started Load Kernel Modules.
[ 1.640998] systemd[1]: Mounted FUSE Control File System.
[ 1.641689] systemd[1]: Starting Apply Kernel Variables...
[ 1.642275] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.642976] systemd[1]: Starting Setup Virtual Console...
[ 1.644065] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 1.645742] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.646672] systemd[1]: Mounting Huge Pages File System...
[ 1.647253] systemd[1]: Mounting Configuration File System...
[ 1.648402] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.648413] systemd[1]: Starting system-getty.slice.
[ 1.649035] systemd[1]: Created slice system-getty.slice.
[ 1.649044] systemd[1]: Starting Journal Service...
[ 1.649940] systemd[1]: Started Journal Service.
[ 1.684590] systemd-udevd[160]: starting version 214
[ 1.714384] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.714388] ACPI: Power Button [PWRB]
[ 1.714417] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.714419] ACPI: Power Button [PWRF]
[ 1.716491] pps_core: LinuxPPS API ver. 1 registered
[ 1.716493] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 1.716760] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.717286] PTP clock support registered
[ 1.718023] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 1.721435] parport_pc 00:09: reported by Plug and Play ACPI
[ 1.721481] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 1.721541] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.721542] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 1.721903] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.721917] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 1.748190] ACPI: Fan [FAN0] (off)
[ 1.748215] ACPI: Fan [FAN1] (off)
[ 1.748234] ACPI: Fan [FAN2] (off)
[ 1.748255] ACPI: Fan [FAN3] (off)
[ 1.748276] ACPI: Fan [FAN4] (off)
[ 1.749478] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.749479] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.749609] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.749610] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.757876] [drm] Initialized drm 1.1.0 20060810
[ 1.767187] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 1.774098] cfg80211: Calling CRDA to update world regulatory domain
[ 1.774823] usb 3-6: new full-speed USB device number 3 using xhci_hcd
[ 1.795673] Adding 16002224k swap on /dev/sdb4. Priority:-1 extents:1 across:16002224k FS
[ 1.801517] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
[ 1.805001] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.806877] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
[ 1.806888] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
[ 1.806895] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
[ 1.806928] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.823570] AVX2 version of gcm_enc/dec engaged.
[ 1.849773] nvidia: module license 'NVIDIA' taints kernel.
[ 1.849774] Disabling lock debugging due to kernel taint
[ 1.856456] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 1.856549] ppdev: user-space parallel port driver
[ 1.856785] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 1.856789] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 337.25 Tue May 27 11:05:28 PDT 2014
[ 1.993532] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 1.993533] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 74:d4:35:86:a4:73
[ 1.993534] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.993584] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 1.993718] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 1.993806] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 1.993810] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 1.993950] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 1.994002] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258)
[ 1.994003] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.996461] iTCO_vendor_support: vendor-support=0
[ 1.996939] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.996968] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 2.005457] sound hdaudioC0D2: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 2.005458] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.005459] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.005459] sound hdaudioC0D2: mono: mono_out=0x0
[ 2.005460] sound hdaudioC0D2: dig-out=0x11/0x1e
[ 2.005460] sound hdaudioC0D2: inputs:
[ 2.005461] sound hdaudioC0D2: Rear Mic=0x18
[ 2.005462] sound hdaudioC0D2: Front Mic=0x19
[ 2.005462] sound hdaudioC0D2: Line=0x1a
[ 2.005463] sound hdaudioC0D2: CD=0x1c
[ 2.005463] sound hdaudioC0D2: dig-in=0x1f
[ 2.008421] systemd-udevd[162]: renamed network interface eth0 to eno1
[ 2.019322] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D2/input6
[ 2.020297] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.020335] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.020370] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.020403] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.020435] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.020468] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.026197] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.132907] systemd-journald[153]: Received request to flush runtime journal from PID 1
[ 2.157519] ath: EEPROM regdomain: 0x809c
[ 2.157520] ath: EEPROM indicates we should expect a country code
[ 2.157520] ath: doing EEPROM country->regdmn map search
[ 2.157520] ath: country maps to regdmn code: 0x52
[ 2.157521] ath: Country alpha2 being used: CN
[ 2.157521] ath: Regpair used: 0x52
[ 2.160431] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.160562] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90006800000, irq=19
[ 2.181947] systemd-udevd[162]: renamed network interface wlan0 to wlp4s0
[ 2.298729] Switched to clocksource tsc
[ 2.376487] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 2.376547] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 2.376591] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 2.376632] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 2.560514] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 3.062601] nvidia 0000:01:00.0: irq 47 for MSI/MSI-X
[ 3.592415] NVRM: Your system is not currently configured to drive a VGA console
[ 3.592417] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 3.592418] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 3.592419] NVRM: drivers including, but not limited to, vesafb, may result in
[ 3.592420] NVRM: corruption and stability problems, and is not supported.
[ 7.032503] usb 3-6: unable to read config index 0 descriptor/all
[ 7.032509] usb 3-6: can't read configurations, error -110
[ 7.299384] usb 3-11: new high-speed USB device number 5 using xhci_hcd
[ 7.769759] usb 3-6: new full-speed USB device number 6 using xhci_hcd
[ 7.973941] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.986288] usbcore: registered new interface driver usbhid
[ 7.986290] usbhid: USB HID core driver
[ 7.987065] input: HID 046a:0011 as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046A:0011.0001/input/input17
[ 7.987234] hid-generic 0003:046A:0011.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:14.0-5/input0
[ 7.987314] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:1532:0016.0002/input/input18
[ 7.987439] hid-generic 0003:1532:0016.0002: input,hidraw1: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:14.0-6/input0
[ 7.989050] mousedev: PS/2 mouse device common for all mice
[ 8.124996] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 8.136818] usb 3-11: reset high-speed USB device number 5 using xhci_hcd
[ 8.136826] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[ 8.136827] usb 3-11: hub failed to enable device, error -22
[ 8.226730] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 8.226799] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 8.296772] usb 3-11: reset high-speed USB device number 5 using xhci_hcd
[ 8.296839] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[ 8.296841] usb 3-11: hub failed to enable device, error -22
[ 8.456902] usb 3-11: reset high-speed USB device number 5 using xhci_hcd
[ 8.481367] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95848
[ 8.481369] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95800
[ 8.481370] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95890
[ 8.481371] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f958d8
[ 8.481372] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95920
[ 8.481373] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95968
[ 8.481374] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f959b0
[ 8.481751] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 8.491510] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 8.491667] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 8.491846] usbcore: registered new interface driver rt2800usb
[ 8.527024] systemd-udevd[163]: renamed network interface wlan0 to wlp0s20u11
[ 37.746771] fuse init (API version 7.23)
[ 162.364940] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 162.368409] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 162.630888] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u11: link is not ready
[ 165.603287] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u11: link is not ready
[ 165.711742] e1000e: eno1 NIC Link is Down
[ 165.815617] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 165.917212] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 165.917299] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 166.200400] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u11: link is not ready
[ 169.526968] wlp0s20u11: authenticate with f8:d1:11:e0:43:42
[ 169.559811] wlp0s20u11: send auth to f8:d1:11:e0:43:42 (try 1/3)
[ 169.561558] wlp0s20u11: authenticated
[ 169.563460] wlp0s20u11: associate with f8:d1:11:e0:43:42 (try 1/3)
[ 169.566987] wlp0s20u11: RX AssocResp from f8:d1:11:e0:43:42 (capab=0x431 status=0 aid=2)
[ 169.569703] wlp0s20u11: associated
[ 169.569713] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u11: link becomes ready
[ 169.601748] wlp0s20u11: Limiting TX power to 20 (20 - 0) dBm as advertised by f8:d1:11:e0:43:42

Graphic Frame can not be renamed

Similar Messages

Maybe you are looking for