Graphic glitches in games

For the most part, Boot Camp works very well for me. However, I'm experiencing a problem with games that's very annoying. When playing 3d games under Windows, I get a weird issue with textures getting stretched to odd places. For example, under Lord of the Rings Online, a hat might get stretched all the way to the ground, covering the whole character. This also happens with Neverwinter Nights 2. It's most pronounced when not using a native resolution (ie, 1440x900), but even at full res it happens occasionally. I've tried wiping out my Boot Camp partition and reinstalling Windows, but even that doesn't seem to help. The problem doesn't appear to affect Leopard, though the games I play under Mac OS X aren't as demanding as the Windows games. Has anyone seen this before, or better yet, found a solution? I'm working with a Macbook Pro with a Radeon X1600.

Well, just in case someone else has this problem, I'll post what seemed to fix it for me. After some research it turned out that my symptoms were typical of overheating. It seemed odd that it would only happen under Windows and not Mac OS X, but I decided to approach it from the overheating angle. I found a Mac OS X fan control program and forced the fans to 6000 RPM. Fortunately, the increased RPMs stayed when I rebooted into Windows, and presto! no more graphic anomalies. Now the rub is I have to boot into Mac OS X, then back into Windows every time I want to play a game. Is this something a Mac Genius could fix, or would it simply be brushed off as a "Windows problem"?

Similar Messages

  • Macbook pro retina graphic glitch

    Hello,
    I'd like to share with you my story with the problems I've had with my macbook pro retina 15' 2012 (with both intel and nvidia graphics) and ask for some help.
    First of all, back when it still had Mountain Lion as its OS I already detected some graphic glitches. When I started the mbpr, 1 out of 5 times it would load buggy. The dock would shake whenever I move the mouse over it, exposé would lag a lot and eventually scrolling in Safari was terrible, incredibly shaky. Basically every animation on the OS went laggy or just at 10 fps.
    However the performance in terms of speed and results was still OK. If I played a game I would detect no error whatsoever.
    So after some months of ignoring it because I had work and couldn't take the mac to the store I decided to take it. It was getting worse as it started to happen more often than usual. By then I had already upgraded to Mavericks (no clean install, just updated) and the problem still persisted.
    Visit #1:
    After explaning the problem and being able to show it to the genius they took my mac. They called a couple of days after telling me it was a OS issue and they did a clean install of Mavericks.
    So I took it home, reinstall everything from scratch, they told me it may be an account/user issue so I better not use time machine to recover anything.
    After a month it started to happen again. I have to say that it happen after I had already installed everything quite some time before, not right after installing any particular app or while running any.
    It would load buggy again 1 out of 2/3 times and it wouldn't stop until I restarted and if I was lucky enough it would load OK.
    Visit #2:
    I returned to the genius and explained again the problem. They decided that it had to be some graphic issue related to the intel or nvidia systems so they replaced the logic board.
    Again a couple of weeks later I detected the problem again.
    Visit #3:
    Once more to the store, they were quite puzzled that even after replacing the motherboard it would still show the issue.
    After doing some tests they decided to reinstall Mavericks. Once installed they found no issue so they decided it was solved.
    After this I had to return once again because it turn out that they forgot to connect the keyboard backlight system and it wouldn't light.
    Anyway, this time I decided to install only the absolutely necesary apps for my work. I even downloaded the newest versions of all of them (if they had newer). Most of those apps are from the Mac App Store and the ones that are not are absolutely famous and used by thounsands of people, not that I use alphas or betas of any app.
    One important detail is that the problem was getting worse. Now every time I started the mac it would be buggy and it was extremely shaky, it was impossible to read while scrolling in Safari now. Sometimes when using exposé/mission control it would even show weird pixels on screen. Every time I had this problem it was worse, more shaky and more often.
    Visit #4:
    Being already a VIP visitor of the genius bar I went decided to solve the problem once and for all. I told them every detail, they saw the problem and I insisted on the software I had was completely "normal". They told me they would replace the screen, the logic board again and the IO just in case.
    So imagine my surprise when I receive a call from the genius who was repairing my machien saying that after reinstalling Mavericks it showed no issue! I was furious. They insisted that it was some app I had installed and that I needed to install one app at a time, wait ONE WEEK and if nothing happens install the next.
    They were not kidding aparently. After complaining I had no choice but to take my mac back and....here I am.
    So my question (after the diary I've written, sorry) is:
    Is this really being caused by an app I have installed? Is really an app capable of crash the entire animation system and only while in the OS UI and not in games? I've never had any app running on the background besides Fantastical (from Appstore) and Dropbox (updated).
    I am listing the apps I had last time I resintalled everything:
    1. 2Do (appstore)
    2. Indesign CC
    3. Appcleaner
    4. Autocad 2014
    5. World of warcraft
    6. Dropbox
    7. Evernote (appstore)
    8. Fantastical (appstore)
    9. Keynote, Pages & Numbers (appstore)
    10. Pixelmator (appstore)
    11. Sketchup 2014
    12. Skype
    13. Steam
    14. The unarchiver
    15. Transmission
    16. VLC
    17. iPhoto
    So, 17 apps, which I believe are just a few. Is there any of those apps you think may cause any issue? I haven't installed anything yet. I am using my old macbook pro (which btw have every app I had in the buggy retina with no problem whatsoever) while I try to see if the problem persist while installing nothing.
    I still don't believe it is a software problem. Since it appears every time sooner and with more "intensity" I suspect it might be hardware but I am no expert.
    Thanks for any help or info you can share!

    Go for a few day (2-3) without installing any apps. Then install AutoCAD 2014 first and run only that for another couple of days. See if the problems resurface. If not, go ahead and reinstall all software, making sure that you create a clone after everything's installed (try Carbon Copy Cloner - they have a few 30-day evaluation period, I believe).
    If problems resurface, you'll know that it's hardware.
    Good luck,
    Clinton

  • MSI N560GTX-Ti Twin Frozr II/OC: Graphical Glitches/Corruption

    Hello, I bought and installed an MSI N560GTX-Ti Twin Frozr II/OC video card one week ago. For the last week, it has been running perfectly, but today when I started up a game the 3D graphics began glitching and showing random stretched triangles and distorted models. While the 3D graphics are running, the monitor randomly loses signal from the video card and occasionally the program will crash with a popup bubble stating that the NVIDIA driver has recovered from a problem.
    After reading through some posts here, I downloaded the MSI Afterburner program, enabled voltage monitoring, and set everything to defaults.
    The defaults are:
    Core Voltage: 1000 mV
    Core Clock : 880 MHz
    Shader Clock : 1760 MHz
    Memory Clock : 2100 MHz
    When I click the button to run a Kombuster stability test, the 3D has the same graphical glitches that I saw in my games. Here is a screenshot:
    http://i733.photobucket.com/albums/ww333/MP64x2/corrupted_880.jpg
    I tried lowering the Core Clock speed and retrying the test. It appears that the level of corruption is proportional to the clock speed. At the minimum clock speed of 440 MHz, the graphics are almost perfect, however a glitch or two will still occasionally show up.
    Here is the test at Core Clock = 705 MHz: http://i733.photobucket.com/albums/ww333/MP64x2/corrupted_705.jpg
    and at 440 MHz: http://i733.photobucket.com/albums/ww333/MP64x2/corrupted_440.jpg
    - I've tried bumping up the Core Voltage a little to around 1020 mV, but it doesn't seem to have any effect.
    - Lowering the Memory Clock also reduces glitches, but they never go away completely.
    - Even at the absolute minimum clock settings, my games still glitch and crash.
    - I do not have access to another system that I can try the video card in.
    System Info
    CPU:   Intel Core 2 Quad Q9450 2.66GHz
    MoBo:  Abit IP35 Pro - LGA775, Intel P35, FSB1333
    RAM:   G.Skill 4x2GB DDR2 800 (PC2 6400) Dual Channel (Total: 8GB)
    Video Card: MSI N560GTX-Ti Twin Frozr II/OC
    Video S/N: 602-V238-130B1103126135
    Video BIOS: 70.24.11.00.00
    NVIDIA Driver: 266.66
    Hard Disks: 2x 640GB Western Digital WD6401AALS
    OS: Windows 7 Ultimate 64-bit
    Power Supply:
      OCZ GameXStream OCZ700GXSSLI 700W
      +3.3@36A,+5V@30A,+12V1@18A,+12V2@18A,+12V3@18A,+12V4@18A,[email protected],[email protected]
    As I type this I'm starting to get corruption right on my desktop too, with random pixels changing color and black rectangles appearing on applications.
    From what I've read in other threads, it seems like my power supply may not be sufficient since it has multiple 12V rails, but before I spend ~$100 on a new one I thought I'd see if anyone had any other thoughts.

    Quote from: MP64 on 22-April-11, 03:46:20
    I have an interesting update on my original problem.
    A week after I reseated the card, the graphical glitches returned. I turned the computer off, reseated the card again, turned it on, and it began working fine.
    Another week goes by with no problems, and then a couple days ago the glitches came back. Thinking it strange that the card could somehow take approximately the same amount of time to cause the same kind of bad connection, I wondered if there was something else that was causing the glitches to temporarily disappear.
    I tried rebooting my computer, but the glitches remained.
    I then completely turned off my computer and pulled out the power cord and left it for a couple minutes. I didn't open the case at all and made sure not to do anything that would bump any components. I turned the computer back on - glitches are gone once again.
    So, it would seem that it may in fact have something to do with the power supply and not any bad connections with the card itself - at least, that's the best guess I have at the moment. I leave my computer on 24/7 so it seems like it doesn't like being left on for an entire week with this new video card installed.
    Does this sound sensible? Is it possible for a power supply to slowly fail over several days, only to start working again after being powered down for a couple minutes?
    Did you ever figure your issue out?  I have the exact same issue.  My system runs fine for almost a week...and then my desktop starts artifacting.  The only way it goes away is to unplug my pc (or flip the switch on PSU).  Then it runs again perfectly for nearly a week again and I start getting artifacts and the message stating that the graphics driver has stopped working and then recovered.
    I also run my pc 24/7 and this problem is getting very annoying!  My PSU shouldn't be a problem as I have the PC & Cooling 750W...
    Oh...almost forgot.  I've seen the same issue on 2 video cards now.  RMA'd the first one and the second one does the exact same thing...

  • Graphical glitch in Steam client

    I'm using Lenovo N500 laptop with 3.14.25-1-lts kernel, i3 window manager and Intel drivers.
    I have a graphical glitch in Steam client, it looks like this:
    Example 1 | Example 2
    It happens in every window or menu that I open. It also happens in games which obviously makes them unplayable.
    I tried reinstalling Steam and drivers, but it didn't help. I also tried searching for solutions, but couldn't find anything.
    Any idea how to fix it?
    Thanks.

    I haven't tried anything other than i3, I've been using it for a while and I don't wish to change it. If it means anything, I don't have the same problem on my desktop (with HD 7850) which also has Arch with i3.
    It happens in Gunpoint and Lyne, among others, both in windowed mode and full screen.
    I have 64 bit system, yes, but the 32 bit libraries are installed.
    Installing Steam fonts didn't help. The other two links didn't help either.
    Thanks for trying to help, though, I appreciate it.
    Last edited by Sublime2k (2014-11-26 20:03:09)

  • [Solved] Catalyst graphical glitches with dual head setup

    Hello all, having a weird issue with my dual monitor setup where graphical glitches make my primary monitor completely unusable. The Tear Free feature of the proprietary catalyst driver is what seems to be causing it:
    Tear Free enabled:
    Tear Free disabled:
    I can safely enable it with one monitor disabled also. The issue is that without Tear Free enabled, I'm experiencing some serious screen tearing when watching videos and playing games.
    My video card is the XFX HD 7970 Double D and I'm using the latest version of catalyst (14.4), installed from Vi0L0's repo. The monitors are the same model with the same specs (1920x1200 @60Hz). I definitely used to be able to use Tear Free with my dual head setup at most a month ago, so some update at some point must have broken it. I temporarily switched back to the open source driver before I had found Tear Free to be the culprit and the performance is still hardly comparable.
    Any ideas? Thanks in advance.
    Last edited by bheinks (2014-05-15 02:38:45)

    Rexilion wrote:Maybe try looking at /var/log/pacman.log and see if you can downgrade packages (start with the kernel). See if that works around the problem.
    Downgrading catalyst to 14.3 seems to have done the job. Thanks for the suggestion, marking as solved.
    Inxsible wrote:bheinks, you have been on the forums long enough to be aware of the forum rules. Make use of an image hosting site.
    Sorry, I don't post often and wasn't aware of the rules on images. I'll keep that in mind next time.

  • Graphic glitch at boot since installing ML. Any clue why?

    Since installing Mountain Lion on my late 2011 MBP I have been experiencing graphic glitches every once and a while.
    The one thing that has stayed consistent is the glitch when I boot up. I get big square blocks that come up as I boot. (Pictured above)
    Anyone have any idea why my mac would do that? Could it be a hardware problem?

    I shut down my Mac overnight and it as I booted today no graphic glitch occured, tried 3 times to see if it would come back and nothing so far. I've never had any issues with overheating and I keep track of it pretty well with iStat Pro. Last night when it was doing it, the temp was around 170 after booting.
    I'm going to try to play a game or something to push the temp up a bit and reboot again. I'll update in a few and let you know if thats the prob. I've been running an FC but I've left it at the default 2000 rpm, I'm not sure how that would affect it because it haven't been that hot to begin with.
    Thanks for all the advice.
    I'm thinking maybe I better make a stop at an Apple store and see what it says before college starts back up and I don't have my mac.

  • Ipad air lagging and graphic glitching

    Ipad air lagging while playing games like temple run and candy crush, the graphic seems like glitching and the moving animation so slow compare to previous edition,,,,idk wht cause tis problem and now im waiting for new ios update hope it will fix it! Dissapointed.

    I took it to genius bar and they replaced it with a new Ipad Air after getting them agreed to the graphic glitch. A more accurate description is the graphics are too jerky (as in not smooth). They agreed after running and comparing the same game (minion rush) in a new Ipad Air side-by-side. And the replaced Ipad Air began the same issue only after I got home. It came with 7.0.4 pre-installed, so there's no way I can know if it's the new iOS issue with Ipad Air or not.
    I've compared it against other devices including GS4, note 8, Iphone 5s and even Ipad 3 and 4, where both Minion rush and gold star run smoothly. I tried to install other high graphic games and began to notice the problem is limited to these 2 apps only. Asphalt 8 graphics is too jerky itselfs to give it a real feel animation, so it's hard to judge in it. I'm wondering if it's just the app problems although both of them are claimed to be compatible with Ipad Air on their app store pages. But if it's really a universal problem with the app, I shouldn't be the only one Ipad Air owner facing it. There should be reports/complaints in forums/app comment boxes, shouldn't it?
    If any of you own an Ipad Air too, can you please try to install these 2 games and reply me back coz I need to know whether this is a hardware problem requiring replacement or not.
    Golf Star is most obvious when the power gauge moves up/down when u swing. You can compare it against any other later devices (apple or android)
    It's most prominent in Minion Rush, from the video that comes on the very first run to throughout game play. The graphic is not smooth and too jerky to the point that even avoiding obstacles becomes too hard.
    Please include your Ipad model and iOS too when you report back.
    Thank you

  • 3D graphics glitches/artifacts

    I've noticed a very weird problem in certain 3D applications. I first noticed it when playing Warcraft 3. In certain scenery, single pixels (usually yellow) will flash briefly then go away. Almost like static. Once it starts happening, two or three will pop up every few seconds so it's very difficult to detect normally.
    Figuring it was probably just the game, I fired up Quake 3 and after a bit I noticed the same thing. Then I tried Diablo 2 and again noticed the same thing (especially after entering a cave or something with dark corners - I see them quite a bit more in there).
    At this point, I was pretty sure it was either a defect in the video card or perhaps the video card was over heating and producing artifacts. But I went ahead and tried two other games, Ghost Recon and Doom3 (demo) and I couldn't get either one of them to show any errors. Even after cranking up the detail options, neither of them showed the slightest hint of problems. I'd roam around for a bit in Doom3 then exit out, go in to Quake3, stick my nose up against the display and sure enough I'd see one or two pixels flickering randomly. Go back into Recon or Doom and nada.
    The problem also doesn't show up outside of 3D apps - i.e, like on the desktop or anything.
    So I'm wondering - has anyone else noticed this sort of thing before? Could it be a driver issue, or an indication of a more serious hardware failure? Another thought occurred to me too - I'm using the ATI Displays (4.5.6 ) preferences panel from ATI. And although I notice the problem with or without and OpenGL overrides for those games, could that be what's buggering things up? My impression was that ATI Displays didn't replace the OS X drivers but allowed you to configure them more.
    Any help would be greatly appreciated! Thanks!

    this is why I hate leopard because graphics problems arrose with outside applications, especially when I am trying to play a game. this is annoying, and once one graphic glitch occurs, I get tons of others! It bugs me soo much. Apple needs to work this out before I go insane from distoritions and graphics disappearing and getting stretched

  • Graphics glitches:  distored text

    I get graphics glitches in the form of distorted text primarily in firefox & safari when I try and scroll within the browser(s). Seems like it is not being refreshed properly.
    Picture of what the distorted text looks like:
    http://media.arstechnica.com/journals/apple.media/safari-distorted.jpg
    ArsTechnica article describing exactly the problem I have been having:
    http://arstechnica.com/journals/apple.ars/2008/04/14/latest-apple-laptops-give-u sers-graphics-glitches-galore

    this is why I hate leopard because graphics problems arrose with outside applications, especially when I am trying to play a game. this is annoying, and once one graphic glitch occurs, I get tons of others! It bugs me soo much. Apple needs to work this out before I go insane from distoritions and graphics disappearing and getting stretched

  • Hd6850 graphics glitch

    Hi
    I'm starting to get graphics glitches with my card (under 1 year old). For example some textures in BF3 appear to have white dots over them (but others seem fine). I have never overclocked my card and it is running from a 650w powersupply. I installed speccy to check the temp and they average 45-55c when not gaming, in game they go from 64-78 on average with highest reached at around 83c.
    Does anyone have any idea what the problem could be - please ask if you require further info
    notice it is only inside the cockpit, and it does seem to improve if I increase the post AA settings in game
    regards

    Re the above post - sorry!
    Here is the full information
    amd 955 pII at 3.2ghz (not overclocked in any way)
    Black sark 8gb 1600MHz RAM Speed, CAS 9-9-9-24 Timings, 1.6-1.65v VDIMM, 10 (runs at 1333 due to motherboard and amd chip)
    MSI 870-c45 motherboard
    MSIĀ  HD 6850 1gb GDDR5 cyclone storm edition catalyst 12.6 stock speeds
    Acer al1916 19"
    sandisk 120gb SSD
    Cit 650w psu Output Max +3.3V +5V +12V1 +12V2 -12V +5VSB 28A 30A 20A 19A 0.3A 2.5A 650 W
    Windows 7 (64bit)
    No special cooling solutions - case has one intake fan at front
    More explanation on problem
    Card seems to be running very hot. I installed furmark last night and ran it for about 15 secs before the card reached 96c. The fan is set to auto and always seems to be on about 50-60% when browsing web and jumps to 80% when gaming.
    Games seem to have lost FPS and texture issues as shown in first post - No crashes though
    Hope this is a little more helpful

  • Graphical glitch with The Next Big Thing

    I have a graphical glitch whilst playing The Next Big Thing. The character keeps disappearing or 'flashing' on/off. It's quite annoying and I don't know what to do.
    There doesn't seem to be any ways of adjusting the graphics, probably because it's a 2D game.
    I went through the apple support but I only get two choices. Either schedule a call or ring them myself later. I can't do either because I'm working abroad and don't have access to a phone.

    Britain666 wrote:
    I bought this from the App Store so I would presume I should get a refund from them.
    For that kind of fix you can use the Report a Problem link in your receipt or the Purhases section of your iTunes account.

  • Help! Graphics glitch! EXTREMELY annoying.

    Hi, so recently I have been getting this really annoying graphics glitch when I open up a game. When I close the game, the glitch stays until i shut down my computer! Here is a picture.
    Notice the black squares. It's extremely annoying and out of control when the game is on!

    Might pay to tell people which Graphics Card your computer has got and what amount of RAM the MacBook has.
    You have also posted in Leopard (10.5.x) whilst listing you are using Snow Leopard (10.6.x)
    There are also various MacBook Forums http://discussions.apple.com/category.jspa?categoryID=218 (Notice it has "Category" in the URL - you need to pick a Forum to post)
    10:24 PM Saturday; February 26, 2011

  • Freezing Macbook Pro. Graphical glitches and occasional 3 tones on start up. Hardware test shows no errors. Is it RAM or a graphics card on the way out, or software?

    Recently my MacBook Pro has been freezing and showing bad graphical glitches. Multiple restarts eventually fix it and a couple of times the three tones break, three tones break warning has occurred on start up. From what I can find this is usually a RAM error but after doing a hardware check I get the response all is OK. This still happens after the check and I am unsure what the problem could be. Can anyone help? Could it be a memory issue, a hard drive issue, Graphics card issue (drivers are up to date) or is something up with the software. I also have a Bootcamp partition running Windows 7 too and this is a problem that presents itself there too.

    Most likely to be RAM:
    Beeps on startup:
    1 beep = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images.
    5 beeps = processor is not usable
    http://support.apple.com/kb/HT2538
    I would suggest you take it to an Apple Store for a free diagnostic.

  • Crashes, graphics glitches, and more crashes when editing video clips

    Can't for the life of me figure out why PE keeps crashing on me, so I'm here for help.
    My system consists of a i7-970 hexacore, 6GB ram, 1x 500GB os drive, 3x500gb raid 0 drives (this is where my video clips are stored), 2x GeForce GTX460 video cards.
    OS is Windows 7 Profressional 64 bit.
    The video files I work with are generally in the 50-200GB size.
    A little background - the videos that I am working with are recordings from Battlefield Bad Company 2 that I have recorded with some capture software called Dxtory.
    I record at 1920x1080 at 60 FPS to avi files.  The avi files are using the "xtor" codec (Dxtory's own codec)
    [ISFT]    DxtoryCore ver2.0.0.101
    [ISRC]    Video:YUV420 Audio:Speakers (Realtek High Definition Audio)
    Audio is PCM 192000Hz recorded in stereo.
    Let me start by saying I have not had trouble with this before until I started recording the videos at 60 FPS.  30 FPS worked ok (some crashes here and there, but they were bearable), but the frequent crashes started happening when I started working with the 60 FPS videos, done mainly so I could play around with slowing the clips down, etc.
    Sometimes I can open and edit clips just fine.
    Recently, a project that I'm working on is crashing when I try putting two different clips from different files together on the time line.  I managed to get it to work once, and saved the project after that.  Then, PE crashed randomly and when trying to reopen the project, it just crashes and won't let me get any further.
    I should mention the graphics glitches as well - occasionally (especially when previewing video clips before adding them to the timeline) after I close the preview window, the graphics in PE will glitch out, causing random lines to appear in certain areas, graphics to stack on top of eachother and freeze up, and sometimes I can click on the "play" button in the main project window and hear everything start playing, but the graphics are completely screwed up to the point where I can't view the video or hit the pause button.
    All of my computer hardware is fine, all drivers, and PE, are up to date.
    Can someone please help me figure out what is going on?  I'll be happy to provide any more information that might help out.

    The most likely issue is the codec that your program is using the create your video. It's apparently not compatible with Premiere Elements.
    This often happens also when people try to record their on-screen video with FRAPS.
    You'll see lots of discussions on this issue in the Premiere Pro forum. However, it's even more pronounced in Premiere Elements, which is designed to work almost exclusively with camcorder video.
    Some video programs are a little more versatile with this type of video. Some people have found Corell's Video Studio better at handling these non-traditonal formats.
    But I did a Google search on Dxtory editing and couldn't find any information on it.
    Sorry I can't offer a solution. But I can pretty much assure you that Premiere Elements isn't it. sorry.

  • Graphical Glitches: Objects appear not selected when they are, Symbols not appearing correctly

    I've been having a ton of graphical glitches with Adobe Flash CS6 and I can't for the life of me figure out for the life of me.
    Things that happen:
    Objects will not appear selected when using the Free Transform Tool.
    Symbols don't appar in scene when pasted, or dragged in until I leave the scene or symbol im in. They show up in the preview window though.
    Something else I've been noticing is that when I use the Pen tool my computer or speakers or something making this werid noise and it only happens when I'm using the Pen tool.
    Any help would be greatly appreciated.

    No one has had these issues? I just got another one. My timeline disappeared, I don't mean the menu hid or thats it not there. It's there its just not actually displaying the Timeline or at least it didn't till I wen't back a few changes for some reason. It was still there though as I could click the eye and lock and the layers (which ones I have no idea) it was all grey. Also again the selection area doesn't show up, all movements of symbols are slow to update their postitions and when I turn on outlines it does nothing.
    Also everytime I close Flash I get an error from windows, no idea why.

Maybe you are looking for

  • Problem using HP LaserJet 5M with AEBS

    HISTORY: Well over a year ago I was able to add a 5M printer to the LAN port of my AEBS and print wirelessly using first a G4 PB and later a G4 mini. This is my only printer. It showed up every time I hit Cmd-P. So easy/convenient. Recently I migrate

  • Do I have to purchase iMovie to reinstall it? It came with my mac

    I guess I'll try reinstalling iMovie to see if that repairs the export function (I asked about that in an earlier post). But if I delete it, will I have to purchase it? It came with my mac. All files will remain even though application is deleted and

  • Sw plugin-container.exe application error on closing Firefox

    The displayed message is - The instruction at "0x0158609c" referenced memory at "0x00000014". The memory could not be "read". Click on OK to terminate the program.

  • Proxies for third party

    Hey guys is it possible to create proxies for third party if i have WAS>6.2? suppose we are doing a File to IDOC scenario and have WAS>6.2 then is it possible to do it like Proxy(file)-XI-Proxy(IDOC) or i cant generate any proxies for Flat files? tha

  • Adobe Air Menu

    Hi All, I am working on adobe air. Can any one explain how to create menus in adobe air using flash actioscript 3.0. I tryed in google but i i didn't find good results. Thanks in advance Regards, Kiran