Graphic/Image not displayed with conditional formatting in Report Designer

We are facing problems with displaying an image in a conditional formatting in the Report Designer. The image itself is in the mime repository and can be displayed in the report if no conditional formatting is used. But if it is used the image doesn't appear in the report.
Backend setup: SP 8
Frontend setup: Patch 8, hotfix 2, Revision 95
Any help is highly appreciated.
Sven

Hi,
I could not reproduce your problem in internal SP8 system. Also images in rows with conditional formatting are displayed.
Do you get any errors after the execution in the portal?
Try to use exactly the same image in both rows (drag-and-drop with CTRL key pressed).
If then your problem still occurs, open a customer message. Describe your problem in detail and write technical name of the report you used.
Regards, Karol

Similar Messages

Conditional formatting in report designer.

Hi All !
What is conditional formatting & how to do it ?
does it act like condition which we do in BEX query designer ?
Can we restrict values using this at the report designer level ?
Regards
Tom.

Hi,
Conditional Formatting: You use this function to set a design that deviates from the design for selected characteristic values, hierarchy nodes, and so on, that is set by the default row patterns.
Conditional formatting can only be applied to characteristic values in dynamic sections of a data provider. A query (or query view) with one or more characteristics in the drilldown forms the basis of a data provider with a dynamic section.
Take a look at the URL below:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/f4b8c3a7dd7065e10000000a1553f6/frameset.htm
Regards,
Kishore
Message was edited by:
Kishore Sivakumar

Image not displaying with HTML text field

I am trying to display am image within
flash using CS3.
I have a text field with the following code.
feedback.htmlText = "<img src='Logo_small.png'</img>"
nothing displays. The image and flash document are at the same level, so that is why I am using a relative link. Do I need to use a full (absolute) link to the image?

That's not properly coded html...
feedback.htmlText = "<img src='Logo_small.png' />";
image tags do not have a closing tag and you didn't close the opening tag if they did, so it would still fail.

Conditional Formatting with multiple characteristics in report designer

Hi,
I'm trying to build a report with images in conditional formatting for two characteristics (=columns). Each of which can have one of the following three status values:
1 - green
2 - yellow
3 - red
For each status value i want to show a different image (traffic light). It works fine with only one characteristic. The conditional formatting creates three details rows in the row pattern (one for each status value) and depending on the status value the corresponding details row with the traffic light is shown.
But if there is more than one characteristic with conditional formatting in the report it only works with a different row for each characteristic value, as the two characteristics belong to different group levels of the row pattern. That means I finally have 2 rows showing the two status values.
To show them all in one row, which is the goal, I have put all the conditional formatting definitions (6=3 for each characteristic) into the detail rows of the row pattern.
But then for one characteristic incorrect images are shown, e.g. although the status value is red, a green traffic light is displayed, because the status value of the other characteristic is green.
Obviously the conditional formatting only works with the characteristic, for which the details rows in the row pattern have been created.
Any ideas how I can manage to show all the conditional images in one row?
Thanks in advance.
Regards,
Sven

Sven,
your scenario is not supported yet.
Right now, a conditional format is based on one condition.
In the future it is planned to allow more conditions to be applied to the rowpattern, using "AND, OR" operators.
The availability of the feature will be announced via the BI Functional Enhancement List (see BIFAQ)
regards, karim

OBIEE 10G Embedded Image not displayed on PDF

Hi
We have some embedded images (source on network share or on the webserver) on a dashboard. On the screen the images are displayed without problems.
But if we want to print the dashboard (f.e. PDF) the images are not printed. In html-view the images would be displayed.
Is there a known bug that images can't be printed on dashboard pages or do we have to embed them different?
Thank you

Hi Team,
I do face the same issue of image not displayed in only pdf output format. Our client has deployed OBIEE 10.1.3.4.1 using Weblogic application server and is accesible through a secured url access.
I have followed the fmap syntax to locate the image, also made sure the image is getting accessed through url, tried with different images of different sizes . In all cases the image display is appearing fine in HTML & Excel output. But not getting displayed only for pdf output.
Can you please help me with this regard if am missing any specific setup for pdf output. Is there is any pointers or documentation available to get around this issue.
Thanks in advance.

OBIEE 11G Embedded Image not displayed on PDF

Hi
I have some embedded images on a dashboard. On the screen the images are displayed without problems.
But if we want to print the dashboard (f.e. PDF) the images are not printed. In html-view the images would be displayed.
All the images are referenced with the fmap path.
Any way to print the images in the pdf ?
Thank you
obiee 11.1.1.5
O.S : Oracle Linux 5.6 x64

Hi Team,
I do face the same issue of image not displayed in only pdf output format. Our client has deployed OBIEE 10.1.3.4.1 using Weblogic application server and is accesible through a secured url access.
I have followed the fmap syntax to locate the image, also made sure the image is getting accessed through url, tried with different images of different sizes . In all cases the image display is appearing fine in HTML & Excel output. But not getting displayed only for pdf output.
Can you please help me with this regard if am missing any specific setup for pdf output. Is there is any pointers or documentation available to get around this issue.
Thanks in advance.

JPG images not displayed correctly in Bridge and Photoshop (Mac OS)

(Note: I have copied the content of this query from the Creative Suites forum where I originally opened it.)
I am using CS4 under OSX 10.4.11 on a PowerMac G5 Quad with 23" Apple cinema display. Images which have been captured as JPG are displayed fine by Preview, but when opened in Bridge, Camera Raw or Photoshop. the colours are all "washed out". The attached screen capture should give an idea of the difference, with the upper being Camera Raw (image settings) and the lower being Preview. My monitor has been calibrated and I'm using sRGB IEC61966-2.1 colour space in Camera Raw and Photoshop. The colours displayed by Preview are pretty close to "real life". I find it virtually impossible to adjust the colours in Photoshop to get back to anything similar.
After opening the image in Photoshop without adjustment, and Save As JPEG with embedded color profile, Preview displays the new image the same as Photoshop. Save As JPEG without embedded color profile, and Preview displays this copy just like the original. It seems that Photoshop is making different (incorrect) assumptions about what color space to use when there is no embedded color profile. Shouldn't it assume sRGB like virtually everything else (http://en.wikipedia.org/wiki/SRGB)? Or is its interpretation of sRGB incorrect? How can I fix this?
Re: JPG images not displayed correctly in Bridge and Photoshop

xxxxyyyyz wrote:
…If there is someone out there who has experience of obtaining decent colour management in CS4 on a Power PC, I would really like to know how you achieved it.
That would be yours truly, and I hasten to reply because I may have some insights that can help you too.
Just get it it out of the way, here's my setup:
Photoshop 11.0.2 ("CS4"); VersionCue disabled and uninstalled.—2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; 1 FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
I can unambiguously and in good faith represent to you that my color management, from capture to print, is as spot-on as anyone with any kind of setup can hope to achieve. Unequivocally and without qualifications.
Now, first things first: Forget about trying to synchronize color management across the point applications lumped together only by Adobe marketing fiat into a variety of meaningless "creative suites". Concentrate on Photoshop. Do not try to use Bridge to synchronize anything.
The "suites" are a totally artificial construct created by Adobe bean counters and marketing types. The point applications (i.e. the individual programs clumsily bundled together, e.g. Photoshop, Illustrator, InDesign, etc.) are developed independently by separate engineering teams that are not only not in the same building, but in different cities, different states of the American Union, and even in different countries. They have very little communication among them, if any, as evidenced by repeated posts in these forums by Photoshop engineering staff urging us, the end users, to let the other teams know in their own forums that a given problem exists and is actually affecting our work.
Enough said about the cause of the problem. The end result is that Color Management is at very, very different levels of progress and sophistication in each individual point application, with only Photoshop fully entitled to be considered state of the art.
Secondly, a disclaimer: I have been hanging on to my CRT monitors and take care of them as Jascha Heifetz used to take care of his Stradivarius. I don't know what I will do if I manage to outlive the usefulness and accuracy of my CRTs (unlikely at this point). I have despaired in futile efforts to bring the luminosity of any LCD monitor down to where I would feel comfortable calibrating and profiling it. I believe my monitors are the foundation of my color management efforts.
Especially if you have one of the extreme wide-gamut LCD or LED monitors, you'll face an uphill battle.
Be careful to avoid any version 4 icc profiles, whether canned or generated by your calibration software. Stick to version2 icc profiles. Ask the manufacturer of your calibration software/hardware if in doubt.
Here are some not-too-recent, but thoroughly representative screen shots of the calibration results I obtain with my monitors, which I calibrate and profile often and regularly (I validate the calibration at least several times per month).
In a nutshell, my color management practices and settings mirror those described by Bruce Fraser, Jeff Schewe, Andrew Rodney and Gary Ballard's site. I have learned from all of them.
My working color space is ProPhoto RGB. I choose to work with PSD and PSB files. As a long-time, rabid JPEG hater, I only rarely deal with JPEGs, using them sporadically to illustrate a point in this forum or elsewhere in the web. My main output consists of prints.
I only deal with tagged image files (files with an embedded color profile) and often recommend beating up with a baseball bat any moron that hands you an untagged file—figuratively of course, but I find the expression gets my point across unambiguously.
Following is a screen shot of some of my pertinent settings:
Note that I have never bought into the "suite" concept myself. I do have and routinely use Adobe Illustrator 10.x, InDesign 2.x and Acrobat Professional 8.x, but they are all older, independent versions of each point application, licensed at different times.
Be further advised, that the answer to many problems offered by Adobe engineers often is not to install VersionCue, or uninstall it, or at least disable it.
Also, as outlined at the beginning of this post, concentrate on Photoshop, not on synchronizing applications that can't really communicate with each other, despite the claims of Adobe marketing hacks to the contrary.
One big caveat, do not fall into this trap:
xxxxyyyyz wrote:
…I believe my problem has nothing to do with my monitor profile, for several reasons, but…
…It seems extremely unlikely to me that…
You either want to learn, or you don't. You either want to solve your problems, or you don't.
When you start arguing instead of studying, questioning advice instead of following it and detecting where you went wrong, you're on the right track to nowhere. That attitude will get you there fast. Remember you are the one with the problem, and only you can acquire the discipline to learn how to solve it.
Go ahead and ask me anything that is not clear, just don't argue with me please, and don't tell me why you think Fraser, Rodney, Ballard and I are wrong. You see, I am not experiencing any problem that needs fixing. I have an interest in helping you, but not in hearing about your speculations, theories or conclusions.
Good luck.
Wo Tai Lao Le
我太老了

CF slows down to a halt ... images not displaying

My primary laptop on which I do all coding ...
- less than 1 year old
- Dell (cough) XPS M1730
- Windows XP (latest)
- ColdFusion Ver 8, developer edition.
- No other issues with laptop
Also running
- SQL 2000
- Synergy
- Anti virus etc. changed Norton daily scan and unaware that I have picked up any viruses - I was my hands very well and often
Over 6 months gradually CF has been slowly not display internal referenced <img src> tags. External work fine.
To the point now where most in our app do not display.
Then in the past 3-4 days a lot of pages when called give Firefox or IE errors:
Page will not display with too may users error.
But there aren't any others.
I go to all other web site, no issues with speed.
I just cold warm booted the machine and now while page 1 appears, page 2, login, takes minutes to appear. But on a beta server (also developer edition) it's instant.
When I go straight into the browser, it works fine, albeit no images, crashes with a known bug (missing application variable), fix it, then resume, then just sits there forever.
And there's no difference between the two machines ... well, not in "that" way.
Adding to my confusion is ... I cannot get into the CF Admin panel.
I can see it approve me, then it just spins.
Nothing has changed on machine in past weeks EXCEPT traveling when I sign in to the usual plethora of wifi and other networks but never had a problem - except luggability
I am thinking of, UGH, reinstalling Windows ... but why bother if it's working perfectly and only ColdFusion has an issue.
Now COLD booted machine for 5 minutes.
Everything seems better except CF still a BIT sluggish and still not "drawing" most images. Able to access Admin panel. Even if there images not displaying.
Anyone any ideas?

Thanks for your prompt reply ...
We scoured for a folder like that and found none.
What we DID find is that over the years of coding, we have a template count of 3,500 files in 130 folders, but the root where we start is about 1,500 files. 144 megs total size though.
That shouldn't be too much? Esp as our beta and production servers are using the same amount with no issues.
Admittedly production is CF 7.X.
Much more powerful machines but still.
It would have made sense as that is the only thing on the machine that has "grown" ... but no luck.
Does remind me of the day when our mail server got hacked and we had 100,000 outbound in the spool. That was fun.: :)

Image not displaying properly for SAP GUI for HTML transaction iview

Hi,
We have a sap gui for HTML iview for transaction REORRR in portal. After giving enough inputs this leads to Business Document Navigator screen(part of Document management) where i need to display a document(.jpg image in this scenario). When i double click on the image it is opening on the right side of the screen but in a compressed format where in we need to scroll down to see the image. But i would require the image to display with out scroll bar or in a new window.
When i change the format of the iview as SAP GUI for Windows the image is opening in a new window.
I would like to know whether there is any configaration settings either in portal or in Document management side. or is this any limitation of the SAP GUI for HTML scenario.
regards
Bharat.

Hi,
You can open this iview in a new window make the setting in the iview properties that will allow the iview to be opend in a new window.
Regards,
Vamshi.

Image not displaying in the Task Sequence Wizard. SCCM2012

This is my question, so I will post the link here.
http://community.spiceworks.com/topic/925727-image-not-displaying-in-the-task-sequence-wizard-sccm2012
Bryan
I captured an image from a PC that I am preparing to be deployed with Office 365. Once I captured
the image, I went to the software library to add the operating system image. That seemed to go on without any issue, but when I look at the summary, I see the big yellow globe saying "in progress" it has not changed since yesterday afternoon.
I then created the task sequence for this image
to be deployed under Software Library, Task Sequences. When I selected the references tab, everything seemed to be in order with the exception of the "operating system image" under type. It was/is showing 0.0% Compliance.

So, the problem described in the other forum post does not match the title of this thread. Are you trying to address two different things? These are unrelated btw.
For the issue in the other thread, you'll have to troubleshoot your content distribution to the selected DP. The distmgr.log and pkgxfermgr.log (assuming you chose to distribute the image to a DP directly attached to your primary site) are the places to
start and will show you exactly what's going on.
As for the title of this thread, we'll need a lot more info to help you there.
Finally, I would suggest you copy your questions from other sources into the thread -- this will help other folks in the future that may stumble upon this thread and will prevent any confusion.
Jason | http://blog.configmgrftw.com | @jasonsandys

Iphone 4 contact pictures do not display with incoming calls

iphone 4 contact pictures do not display with incoming calls. they did before the ios 6 upgrade

I am assuming that you have associated a picture with the contact in the information for the contact

Ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

No on the book title, no problem there.
The issue is: my book pages appear as on white paper, no background that resembles a open book and also no option to change fonts. The book was created in iBooks author, there was a problem going with the "Publish" menu route so I was instructed my Apple to "export" the file and submit that. I think that's the problem after reading that iBooks author is a hybrid epub file.
Thanks for getting back to me.

Itunes store does not display with in the itunes player, why?

I have latest iTunes download. I have PC with Windows Vista. My system requirements are what they should be for the iTunes player. I have gone through all of the troubleshooting that i am willing to go through to make this work - Can someone !! Tell me why does the iTunes store NOT DISPLAY with in the iTunes Player?
I click on the iTunes Store from the iTunes player...center screen with in the player shows that its "Accessing iTunes Store" when its finishes - the screen remains blank! and stays like that...
Again why does the iTunes store not display with in iTunes?
Also , my Safari acts the same why...i open the browser and the Screen just sits there never finding, opening, or access anything from the web...YES I am connected to the internet? SO why does Safari sit there...

http://support.microsoft.com/kb/972034
This worked for me.
Reset HOSTS File back to defaults

How can i reorder the columns in the do not display section of the interactive report.

Hi,
My interactive report contains 185 columns, and the user requieres to build his customized reports with some columns, but the he gets lost between this amount of columns, this would be easier if the columns in the do not display section of the interactive report would be sorted automaticaly, Is this possible?
Thanks a lot,

Hi Eva,
One solution would be to order the column names alphabetically. You can create a JavaScript dynamic action to handle the sorting.
The shuttle of the IR attribute "Select Columns" have the ID's "apexir_SHUTTLE_LEFT" or the Hidden colums and "apexir_SHUTTLE_RIGHT" for the displayed columns.
The function you'd need to create would look like:
var options = $('select#apexir_SHUTTLE_LEFT option');
var arr = options.map(function(_, o) { return { t: $(o).text(), v: o.value }; }).get();
arr.sort(function(o1, o2) { return o1.t > o2.t ? 1 : o1.t < o2.t ? -1 : 0; });
options.each(function(i, o) {
o.value = arr[i].v;
$(o).text(arr[i].t);
var options = $('select#apexir_SHUTTLE_RIGHT option');
var arr = options.map(function(_, o) { return { t: $(o).text(), v: o.value }; }).get();
arr.sort(function(o1, o2) { return o1.t > o2.t ? 1 : o1.t < o2.t ? -1 : 0; });
options.each(function(i, o) {
o.value = arr[i].v;
$(o).text(arr[i].t);
You'd need to find the propper timing for the dynamic action to run, I guess click of the button "Select Columns" would do the trick.
Regards,
Vincent
http://vincentdeelen.blogspot.com

How do I display Canvas Graphic image (Not Iconic button) from jar file

Hi all,
I am currently using Forms 10g.
I have gone through the tutorials on how to add Button Icons into Jar files for web enables forms .....so far so good
This however does not explain what I actually want to do... since "graphic images are by nature embeded in the for rather than referenced ......so here goes ..
I have a forms 10g application where all the individual form modules/canvases display a big banner (covering top 20% of the screen). This was done by importing the image straight unto the content canvases. As you know this now becomes a "graphic Image" now embeded(& not referenced by file name) on the canvas. Also bear in mind that this is actually different from an "Image Item" which is a block object.
I dont know if this is possible, but what steps do i follow to make the image part of a jar file as opposed to my current situation. Please let me know if possible or not so I stop waisting development time looking for answers :)
Another question is how do i make this jar file a library object so that we can vary the image as we wish
NB: one other trick which i can think of is to create a giant push button across the screen to display the image and then stick it in a jar file !
Cheers
css_jay99

I don't know about embedded images imported in from the builder, but there is a way to use READ_IMAGE_FILE into a BLOCK.IMAGE_ITEM where the images are all in a jar file stored on the OAS.
Metalink Note:137397.1 explains it in details.
Tony

Graphic/Image not displayed with conditional formatting in Report Designer

Similar Messages

Maybe you are looking for