Graphic manager Oracle 9i on linux Red Hat 8.0

I would like to know if someone can help me about the way that i can start the Graphic manager of Oracle 9i on Linux Red hat 8.0, because after i installed Oracle, the manager starts but when I shut down my computer it never appeared again. Can you help me please???

I would like to know if someone can help me about the way that i can start the Graphic manager of Oracle 9i on Linux Red hat 8.0, because after i installed Oracle, the manager starts but when I shut down my computer it never appeared again. Can you help me please???

Similar Messages

  • Install oracle 9i on Linux Red Hat 8.0 Professional

    Hi all,
    i need to install oracle 9i on Linux red hat 8.0 professional. I dont know if this platform is certified by oracle and if there are any problem to install that.
    Any information will be appreciate.
    Thanks in advance
    Regards
    Giuseppe

    HI,
    According to Oracle "Unix Installation/OS: RDBMS Technical Forum", it is not supported.
    I am pasting the final answer from one of the Oracle Analyst: (Hope it is OK)
    From: Oracle, Amit Podder 19-Aug-03 15:14
    Subject: Re : Does oracle support 9.2.0.2.0 on Redhat 7.X or 8.0
    Hi,
    AS of now Oracle Server - Enterprise Edition Version 9.2 is not certified on Red Hat 8.0.
    The information on future plans is not published so we are unable to convey any info on the same.
    Warm Regards
    AMIT

  • Installing Oracle 9i on Linux Red Hat 7.2

    I got the following error when installing Oracle 9i on Linux Red Hat 7.2:
    Initializing Java Virtual Machine from /tmp/OraInstall/jre/bin/jre. Please wait...
    jre was not found in /tmp/OraInstall/jre/bin/../bin/i586/green_threads/jre
    Any ideas how to fix the problem?
    Thanks

    Try installing 9i on RH 7.1. I don't believe 9i runs under 7.2 due to library incompatibilities.

  • Uninstall oracle 10g from Linux Red hat

    is any body know the standard procedure to uninstall oracle 10g from linux red hat.

    The correct answer is "Undo the changes you made during the install"
    By this I mean:
    Stop all of the processes
    Delete the ORACLE_BASE directory (usually the one one level up from ORACLE_HOME)
    Delete the oraInventory directory if it isn't inside ORACLE_BASE
    Delete /etc/oratab, /etc/oraInst.loc
    Delete /user/local/bin/coraenv, /user/local/bin/oraenv, /user/local/bin/dbhome
    Undo any environment settings you may have modified (in .bash_profile and bashrc)
    That should be just about it. That's how I usually clean out my system between installs.
    ~Jer

  • ARABIC setup for oracle DB on linux red hat 4

    Hi,
    i have installed oracle DB on red hat 4 linux OS. I want to input and read/view arabic data on the oracle db. my oralce db NLS parameter setting are given below.
    PARAMETER VALUE
    NLS_LANGUAGE AMERICAN
    NLS_TERRITORY AMERICA
    NLS_CURRENCY $
    NLS_ISO_CURRENCY AMERICA
    NLS_NUMERIC_CHARACTERS .,
    NLS_CHARACTERSET WE8ISO8859P1
    NLS_CALENDAR GREGORIAN
    NLS_DATE_FORMAT DD-MON-RR
    NLS_DATE_LANGUAGE AMERICAN
    NLS_SORT BINARY
    NLS_TIME_FORMAT HH.MI.SSXFF AM
    PARAMETER VALUE
    NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
    NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
    NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
    NLS_DUAL_CURRENCY $
    NLS_COMP BINARY
    NLS_LENGTH_SEMANTICS BYTE
    NLS_NCHAR_CONV_EXCP FALSE
    NLS_NCHAR_CHARACTERSET AL16UTF16
    NLS_RDBMS_VERSION 10.2.0.1.0
    also please let me know what changes do i have to make to my .bash_profile file in linux OS. the content of the file is given below.
    #bash_profile
    # Get the aliases and functions
    if [ -f ~/.bashrc ]; then
    . ~/.bashrc
    fi
    # User specific environment and startup programs
    ORACLE_BASE=/u02/oracle
    ORACLE_HOME=/u02/oracle/product/10.2.0/db_1
    ORACLE_SID=fgbuatdb
    LD_LIBRARY_PATH=/u02/oracle/product/10.2.0/db_1/lib
    TNS_ADMIN=/u02/oracle/product/10.2.0/db_1/network/admin
    PATH=/u02/oracle/product/10.2.0/db_1/bin:/u02/oracle/product/10.2.0/db_1/OPatch:$PATH
    ORA_NLS33=/u02/oracle/product/10.2.0/db_1/ocommon/nls/admin/data; export ORA_NLS33
    NLS_LANG=ARABIC_.AR8ISO8859P6; export NLS_LANG
    export PATH ORACLE_BASE ORACLE_HOME ORACLE_SID LD_LIBRARY_PATH TNS_ADMIN

    i tried changing the character set by ethe below mentioend commands
    SHUTDOWN IMMEDIATE
    STARTUP MOUNT;
    ALTER DATABASE OPEN;
    alter database fgbuatdb character set AR8ISO8859P6;
    SHUTDOWN IMMEDIATE;
    STARTUP;
    but i got the error as
    ORA-12712: new character set must be a superset of old character set
    please let me know what should i do get the arabic data on my db.
    my NLS_Parameters now are
    PARAMETER VALUE
    NLS_LANGUAGE ARABIC
    NLS_TERRITORY UNITED ARAB EMI RATES
    NLS_CURRENCY ?.?.
    NLS_ISO_CURRENCY UNITED ARAB EMI RATES
    NLS_NUMERIC_CHARACTERS .,
    NLS_CALENDAR GREGORIAN
    NLS_DATE_FORMAT DD/MM/RR
    NLS_DATE_LANGUAGE ARABIC
    NLS_CHARACTERSET WE8ISO8859P1
    NLS_SORT ARABIC
    NLS_TIME_FORMAT HH12:MI:SSXFF P M
    NLS_TIMESTAMP_FORMAT DD/MM/RR HH12:M I:SSXFF PM
    NLS_TIME_TZ_FORMAT HH12:MI:SSXFF P M TZR
    NLS_TIMESTAMP_TZ_FORMAT DD/MM/RR HH12:M I:SSXFF PM TZR
    NLS_DUAL_CURRENCY ?.?.
    NLS_NCHAR_CHARACTERSET AL16UTF16
    NLS_COMP BINARY
    NLS_LENGTH_SEMANTICS BYTE
    NLS_NCHAR_CONV_EXCP FALSE

  • Modo Grafico Oracle 9i en Linux Red Hat 8.0

    Por favor quisiera saber si saben como levantar el administrador grafico en Linux del oracle 9i, ya que al terminar la instalacion este se levnata automaticamente, pero al apagar la maquina se cierra y no se como levantarlo

    Por favor quisiera saber si saben como levantar el administrador grafico en Linux del oracle 9i, ya que al terminar la instalacion este se levnata automaticamente, pero al apagar la maquina se cierra y no se como levantarlo

  • Oracle 8.1.7 on Linux Red Hat 7.2

    We have two Servers, One is HP6000, the other is Dell 6400. Both are Linux Red Hat 7.2 OS with Oracle 8.1.7 installed.
    Now I want to make a cluster with them, One is active, One is standby.
    Which software I need? And how install it on my servers?
    Best Regards
    [email protected]

    you might need cluster software such as RedHat Cluster Manager to perform failed over. it came from with RedHat AS (Advanced Server). other third party sofrwares (plus firmware supported) are also available.

  • Oracle 8.1.7 installation problem on ( linux) red hat 7.1

    HI,
    I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
    AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
    "Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
    PLEAE HELP ME please help me !!!!!!
    Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
    Please help Me..

    Hi,
    My name is Fridirick REMBEAUX and I have the same problem. ;))
    I did not understand the first point after :
    1. /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
    At which url can I get this script ?
    I think that maybe it's not the same problem because the installer and so the jre
    still executed but nothing else appears.
    And I'm also lost. When did the oracle products work well ??
    I think I damned.
    Hi
    I get same Problem on Rh7.3 !But when i execute 2 Step will be OK!
    1. /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
    2. export LD_ASSUME_KENERL=2.2.5
    HI,
    I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
    AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
    "Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
    PLEAE HELP ME please help me !!!!!!
    Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
    Please help Me..

  • Error while installing Oracle 9.0.1 on Linux Red Hat.

    I am trying to install Oracle 9.0.1 on Linux Red Hat (Enterprise Edt), and getting this long error---
    "Initializing Java Virtual Machine From /tmp/OraInstall0/jre/bin/jre. Please wait...
    :symbol errno. version GLIBC-2.0 not defined in gile libc.so.6 with link reference (libzip.so) unable to initialize thread: cannot find class java/lang/thread
    Could not create Java VM."
    Any workaround for the above error.

    try execute: export LD_ASSUME_KERNEL=2.4.1 before you run ./runInstaller
    Btw try look at http://www.puschitz.com for installation guide.

  • How to install Oracle 10g on to Red Hat Linux 5 Server

    I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
    How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
    Thanks

    Unfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
    ./runInstaller -ignoreSysPrereqs
    or this method:
    Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
    Edit the file /tmp/oraparam.ini so this file reads:
    After
    [Certified Versions]
    Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
    also, make sure you have these packages installed:
    # rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
    libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
    glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
    libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
    compat-libstdc++-33-3.2.3-61.i386.rpm
    ~ Madrid.

  • How to install Oracle in linux red hat.

    Hi,
    Follup this thread How to install ?
    i'm trying to install oralce in linux red hat 4.i extraced the db sucessfully
    Now iing'm try to copy this
    kernel.shmall = 2097152
    kernel.shmmax = 2147483648
    kernel.shmmni = 4096
    # semaphores: semmsl, semmns, semopm, semmni
    kernel.sem = 250 32000 100 128
    fs.file-max = 65536
    net.ipv4.ip_local_port_range = 1024 65000
    net.core.rmem_default=262144
    net.core.rmem_max=262144
    net.core.wmem_default=262144
    net.core.wmem_max=262144
    from http://www.oracle-base.com/articles/10g/oracle-db-10gr2-installation-on-rhel-4.php . and paste into /etc/sysctl.conf here .. But copy and paste is not working.. How can i do that ?

    sb92075 wrote:
    phaeus wrote:
    Hello,
    i think you can work best if you connect your guest to the host network and working from the host directly (if you have no skill with linux). To do this "system-config-network" if avaible on the guest will help you to set ip address.
    Otherwise use a text editor like vi or something like that. Most folks these days can not even spell vi when spotted one of the two letters.
    All they know how to do is click on the GEDIT icon.What does this mean ?

  • Installing Oracle Database 10g  on Linux Red Hat 5.1

    While inslalling Oracle Database 10g Client Release 2 (10.2.0.1.0) for Linux x86-64 on Red Hat Enterprise Linux Server release 5.1 (Tikanga) we've got an error
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Failed <<<<
    Could we install Oracle Database 10g on Linux Red Hat 5.1 or we need only Oracle Database 11g?

    Verify that the redhat-release RPM is installed on your Red Hat system:
    rpm -q redhat-release
    This RPM is important for RHEL since RHEL AS 4, RHEL AS 3, and RHEL AS 2.1 are Linux releases supported by Oracle. Without this RPM, Oracle 10g OUI won't be able to recognize it as a supported OS. However, the installer of 10g 10.1.0.3 does not recognize RHEL AS 4 as a supported release yet. This means that you will have to edit the /etc/redhat-release file. You also have to change /etc/redhat-release for unsupported releases like Fedora Core and RH9.
    I do not recommend to execute "runInstaller -ignoreSysPrereqs" since this will disable other checks you probably don't want to.
    On RHEL AS 4 (for 10g R1), RH9, and FC 1 you have to change the /etc/redhat-release file to make Oracle 10g believe it's running on a supported release.
    Regarding RHEL AS 4, the installer for 10g 10.1.0.3 does not recognize RHEL AS 4 as a supported release but 10g R2 OUI does.
    To change the /etc/redhat-release file, you can simply copy/paste the following commands:
    su - root
    cp /etc/redhat-release /etc/redhat-release.orig
    cat > /etc/redhat-release << EOF
    Red Hat Enterprise Linux AS release 3 (Taroon)
    EOF
    After you are done with the Oracle10g installation, undo the changes you made to /etc/redhat-release:
    su - root
    cp /etc/redhat-release.orig /etc/redhat-release
    Kamran Agayev A. (10g OCP)
    http://kamranagayev.wordpress.com

  • Installing Oracle 9i database on Red Hat Linux 7.1

    Hi,
    I have downloaded Linux9i_Disk1.gz, Linux9i_Disk2.gz and Linux9i_Disk3.gz for installing Oracle 9i database on Red Hat Linux 7.1. I unzipped those files to Linux9i_Disk1.cpio, Linux9i_Disk2.cpio and Linux9i_Disk3.cpio. What is the command to extract these .cpio files to get all the associated files that are archived? Can anyone help me on this?
    Warm Regards,
    Manash Pradhan

    Thanks a ton. I am sorry for not checking the download page since the download was done by another person.Thanks again.
    Warm Regards,
    Manash

  • Oracle Database 10g on Red Hat Linux Virtual Machine download location?

    anyone know where i can download the vmware image of redhat and oracle preinstalled?
    its called "Oracle Database 10g on Red Hat Linux Virtual Machine"
    i found a reference to it on this page, but the link at the bottom is broken.
    http://www.oracle.com/technology/obe/10gr2_db_vmware/htmlfiles/readme_oracleonlnxeval.html
    i want to test out oracle on redhat before i install it completely

    Please don't cross post on many forums,
    check where can i download a vmware image of redhat and oracle preinstalled?

  • How do I export schema in Oracle 9i (Linux red hat)

    Hi all,
    How do I export schema in Oracle 9i (Linux red hat)? Thank you in advance for your help.

    Same way I do it in Linux SuSE
    set the environment correctly
    call the exp routine
    pass the correct parameters to the exp routine
    The correct parameters may be found in the Utilities manual for your version at http://tahiti.oracle.com - specifically look for 'owner='

Maybe you are looking for

  • How do you change the directory of system exec after it has ran once in the current vi

    Hi all, Attached is the sub vi that i am running in my main application.  I run it twice and change the directory of the file to run.  It appears that after i run this vi that i cant change the directory and it tries to run a file from the incorrect

  • Final Cut Pro X CRASHES every time I try to add a transition

    G'day - just wondering if anyone with this issue has found a solution ? Have seen some scatterings regarding this issue - but no real solutions. It's doing my head in - just trying to add a simple cross disolve will crash it everytime. Any help would

  • Document-Type not known for scanned invoice

    Hi experts, I assign in OAWD a scanned document (Vendor Invoice) with "Storing for subsequent entry" to an user. Vendor Invoice is linked to TA F-43. The message appears in the Business Workplace SBWP. After executing a window appears "Process docume

  • How to distribute Sales Order without pressing end in context Area

    Hi Experts, I have a requirement in which I am planning to add a new button near to the "end" button in the context area. According to me this new button will distribute the Sales Order into R/3 (similar to end button functionality) but it will not c

  • Adding two more fileds in the query

    Hi All, Here is my current working query. SELECT SUM(q1),SUM(q2),SUM(q3),SUM(q4) FROM  TEST WHERE p_year = 2009 AND   part   = 'AA' AND   sup_code ='015' GROUP BY p_year *,part* *,sup_code;* From which i need modify the query to get the fields like s