Graphic mode 16X

Hi,
I have windows 8.1 and I want to Run one Game in a laptop (GTA2). I think the display adapter is completely installed.
But I can`t run this game (GTA2). I get this Error:
How can i available video mode 16X? Please help me.
Thanks a lot.
Future is mine! https://www.linkedin.com/profile/view?id=348121970&trk=nav_responsive_tab_profile_pic

Hi,
Here's a response for GTA2 common problems:
Q: How do I fix a 16x16x16 Video Mode error?
A: Run GTA2 Manager and make sure your video settings are accurate. Try selecting different resolutions.
http://gtamp.com/gta2/gta2-common-problems/
So the main issue is that you're unable to change the resolution, I searched on the HP website, and found the link below
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=4145372There
are no drivers for Windows 8.1 for HP Probook 4320s, this model of PC seems not fully compatible with Windows 8.1, it's recommended to contact the HP support for more information about this.
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Similar Messages

How can I display the information in graphical mode...

Hello.
I need to display the information in graphical mode. For show the information I am using the object cl_gui_alv_grid.
Can you help me and tell me how can I do this??...
Thks a lot.
Edited by: Pedro Gallardo Guzman on Sep 3, 2009 6:15 PM

Hi Pedro,
I do not understand what you are talking about and what you expect.
Please give some more details about what you want to achieve.
What is "information in graphical mode" - something like bars and pie slices?
Best regards,
Clemens

Fixed graphic mode causes windows freezing dv7

Hello guys,
I have a question about my hp dv7-6b21sm which has i7 2670qm, 8gb of ddr3, 1tb of hdd and a hd6770m graphic card. Now to the problem.
A little ago I've figured that battlefield 3 will not run in fullscreen unless I turn on "Fixed" graphic mode in bios. So that's what I did, switched from dynamic to fixed. And now the problem steps in. Everytime I choose the "fixed" mode, the PC boots into windows and then works for, let's say about 2-3min and then freezes and a reboot is in order. Dynamic mode doesn't do that. I have found no bios upgrades, mine is a version F.02, so I've tried to flash it to F.1b and it is not working. Just says that this driver is not for my dv7.
The next problem I've came across aswell is that if I run the game call of duty 2, the game automatically chooses the Intel hd 3000 although I've set the switchable graphics to High Performance. What the F? Still runs pretty smooth but I can't keep it with constant 250 fps ingame (don't ask why, a matter of being used to playing at that framerate).
The third problem looks like it is some sort of a "Standard" for HP. Overheating. My god. I'm playing skyrim on lowest settings and my gpu idles at about 50°C when under load, it jumps up to about 80°C. Is that like normal for HP notebooks? I remember playing it on my brothers ASUS and his max temps were about 60°C in a high mode, with same specs as my HP only graphics were Nvidia gt555m.
Oh and just remember the 4th problem. Youtube HD videos. Why is it that if I watch a HD video ripped from blu-ray, the picture is clean and sharp and colorful. Even Vimeo works like a charm on this machine for watching HD videos. Now when I go to youtube, play a video in 720p or 1080p or even Original quality, and put it to fullscreen, everything becomes square-like and choppy and graphics look like they are 240p stretched to full screen. I mean seriously HP...Is it that hard to make something with a little more quality to it? I've payed like 1000eur for this machine. For that money I would expect that it'd be working like charm.
Thank you for your replys guys,
zitnikp

Overheating is commonly reported in HP notebooks during intensive tasks like gaming. 80 degrees seems suspiciously high for gpu temps, are your sure you didnt mix this with your CPU temp. I have similar specs except with 1gb of vga memory and can normally play Skyrim at high settings at 1366x768 res, temperatures for my cpu can range from 60s to 70s but my gpu rarely goes past 70 degrees. If you set HP coolsense to 'coolest mode' this should solve your problem. As for your graphics problem, have you tried updating to latest amd drivers? 8.882.2.3xxx should be latest

Windows Vista: Unable to Install in graphical mode

I try to install NW 2004s ABAP on a VISTA laptop.
After starting the setup.exe I get the following error message:
The installer is unable to run in graphical mode. Try running the installer with the -console or -silent flag.
What does this mean? Where can I change this setting?
Thank you in advance,
Heiko

NSP can't be installed directly on Vista...Please follow this link...
[Intalling minisap (Traial version) on Vista;
You should use VMWare, create an WinXP Host OS and then install NSP on it...
Greetings,
Blag.

We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode

We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode

1344675 wrote:
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode
Why is your "requirement" to install in graphical mode? Once you are past the installation itself, the only thing that buys you is that your server will have been configured to boot up to runlevel 5, running a graphical desktop (gnome or kde, I forget which). And what does THAT buy you on a server?
I do not run ANY of my Linux servers "in graphical mode" -- running a graphical desktop. Nor did I run a graphical desktop when I had Solaris, AIX, or HP-UX servers.

Oracle VM Server - install error - Graphical mode

Hi all!
I hope, you can help me the following problem.
I try to install an Oracle VM server to a FS server.
First, I tried the newest version - OVM S 2.2.1
In the begining Everything is allright.
But after I have to choose the keyboard, the next screen did not come up. Just a blue screen.
I went to the alt+F3 terminal, and I found a warning there:
WARNING Graphical mode is not avaible...Start text mode.
So the screen where I can partition the disk, did not come up..
I tried earlier version too - OVM server 2.1.5, but It is the same problem too.
Can somebody help me in this, what couse this problem, and how can I fix this, and install the O VM server?
Thx in advance!
Peter Kokai

I purchased an Asus Sabertooth motherboard with an I7 4770 cpu and the Oracle VM server fails to detect the motherboard. I am seeing the same error that is posted in the Known Issues list with the Dell 380 Broadcom ethernet adapter.
Do I have a compatibility issue? The disk ISO was being given out at EMC World. I do not know how to tell what version it is.
I tried downloading the 3.2.2 version iso and it seems to have trouble with my USB devices, because my keyboard stops working and I can't select between media cd test or skip.
Are there any workarounds? Should I just wait for a future release?

MIC / VENDOR Trend analysis in Graphical mode

Dear Freinds,
please explain me how top perform trend analysis in graphical mode for a material procured from a vendor over a period of time.
Report should display the charecterstics recorded for Material / Vendor combination.
I am not using SPC charecteristics.
regards
jeevan

Dear Jeevan
There are two ways in which you can do the graphical analysis for material vendor combination
1) You can do it in MCVD. Here you can get all the relevant mics in the desired combination
2) But a better graphical analysis can be done in QS28. But here you will have to specify the MIC.
Go to QS28. Input the plant and the mic and execute. You will get MIC details. Choose the MIC and click on Result history. A pop will appear Result history Limit Selection. Here you can mention the vendor . Execute you will get the entire list of lots with all values and charts. You can run chart, histogram, cp , CPk values. Run chart for mean, runchart for single values etc
You can do this through the inspection lot also. Go to QA33 > result> Select the Mic> go to Result history >enter the vendor. Execute you will get the entire list of lots with all values and charts
Hope this helps
Regards
Gajesh

Condensed mode printing in graphic mode printers

Dear sir.
I am using Reports-6i as developer tool.
while developing reports i use to run in character mode,
Before generating the report i will pass prt file, and also before printing code
should be condensed.
The report get printer in dot matrix printer as condensed mode ,
What i need is the same should print in HP desk jet or any graphic mode printers
by taking care of software.
please guide in this regard.
mathapati.

Please try the following:
1) in printer settings, in advanced tab "print directly to the printer" must be selected.
Hope this helps.
Bob

OS X starting in graphic mode only - no single user, no recovery

My intel-mac (2008, Yosemite 10.10.2) is suddenly only starting in graphic mode. No keyboard-commands during start-up are working - neither "r" for recovery-mode nor "alt" for chosing the startup-disk nor "s" for single-user-mode.
What may be wrong here? How can I fix it?
Thanks a lot!
Rainer

In addition, I found out that in 3 of 4 boot-processes the booting comes to a halt with a white screen. Nothing happens, I can wait for a long time.
Now, I re-installed OS X Yosemite and the trouble seems to be gone.
What could have happened to cause this?
I'm not very frequently installing new software or removing software...

Video/graphic mode in java application

hello all,
I have a question. How can I run my application in Video/Graphics mode.
Egs.... just like screen savers run. I mean no frame or window, not resizable, not restorable, not canelable..nothing..just like in C/C++ where whole of the screen is black and ur application is running....like games etc.
pls...answer it if anybody knows
Thanks in advace.
Sanjeev Dhiman

hi , giving u my last single dollar..
Although I found ans as soon as I posted but thanks for ur effort.
Cheers !
Sanjeev Dhiman at [email protected]

Switchable Graphics Mode in the BIOS is not listed(seen)

Hi everyone!
I've read that:
NOTE: If you do not see Switchable Graphics Mode in the BIOS or it cannot be selected, see the following section Updating the BIOS to enable Fixed Mode .
However, I didn't see that switachable craphics mode is seen in my BIOS:
Product Name: HP Pavilion dv6-6093ex
Product Number : LM610EA#A2N
Version of BIOS is: F.05.
Vendor of BIOS is: Insyde
Also, I would say that my BOIS is not a UEFI BIOS because I cannot navigate the menus with a mouse but only just with the keyboard.
However, I really was told that I shouldn't update the BIOS unless I am having a problem with it.
Thus, I am afraid that if I had updated it, I would be encountring some problems not loading my machine well. However, I really want to know how to switch to external or internal adapter, thus I read here:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02948560#fixeddl

Please see OpenGL Applications Cannot Use Discrete GPU with Intel + AMD Switchable Graphics for the basic procedure to update the BIOS and change the BIOS setting.
HP Notebook System BIOS Update (Intel Processors) (SP54024) F.1A REV: A or later
HP Notebook System BIOS Update (Intel Processors) (sp55068) F.1B
and
AMD High-Definition Graphics Driver (SP53025) 8.830.6.2000 or later
AMD High-Definition Graphics Driver (sp55092) 8.882.2.3000
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

[SOLVED] corrupted display after graphical mode

Hello,
I am new to ArchLinux.
After Installing the system, I followed the instructions on wiki.archlinux.org and managed to launch the graphical mode (xterm and even KDE).
However, it seems that after exiting the graphical mode, my screen is corrupted (I suspect that text console becomes corrupted during launching graphical mode but it is not visible until returning to text mode).
The Linux itself works properly (f.ex. alt+ctrl+del works ok).
I added only exec xterm to the ~/.xinitrc file and I am using MSI netbook with intel graphics card.
I attached two pictures describing the problem:
http://kdiablo.hostit.pl/img/DSC_0045.jpg
http://kdiablo.hostit.pl/img/DSC_0048.jpg
And logs from xorg:
http://kdiablo.hostit.pl/img/Xorg.0.log
I would be very helpful for any help!
Cheers,
KK
Last edited by kdiablo (2014-11-06 21:29:34)

I checked my graphics card as you advised.
# lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 0b)
I also found in the netbook's specification that:
CPU: Intel Atom Processor N2800/N2600 Series
Graphics: Intel GMA 3650
I could assume that indeed, https://wiki.archlinux.org/index.php/Intel_GMA3600 would be the proper driver for me.
However, based on information from the website, the kernel version - 3.17.2, and the xorg version - 1.16, I am quite worried if I can try to install these drivers.
Are there any newer versions/similar drivers available?
KK

T430 screen flicker in Discrete Graphics Mode (BIOS)

I recently bought a t430 with both igpu and dgpu 5400m and I'm loving it.
When I first received it I tried to connect it to a TV but it had issues which I later found was due to Optimus. So I followed a solution that suggested that I switch the BIOS Graphics mode to 'Discrete Graphics' instead of 'Optimus (default)'.
But when I changed to Discrete, I get an artifacted Flicker on the screen whenever there is a hardware acceleration (not sure if thats the right word for it).
For instance if I move a folder window around the desktop, the moment i start moving it and hardware acc kicks in, i get this flicker. Then when I let it go and hd-acc turns off then I get anoter flicker on the screen. I can reproduce the flicker everytime I maximize and minimize a window/page that has animation/high fps content. If I run a game on it then the flicker occurs only once at the begining, and repeats after i minimize/exit the game.
I tried fraps to capture it and whats funny is that when I play that capture on my laptop I can see the flicker, but when I run the same video on my Desktop, i dont see any flickers in the video at all. Could be my laptop flickering to the Video Playback.
My NVS Drivers are up to date. 320whql

engr_ali,
Are you connecting via external VGA or displayport? If you have tried driver and setting changes as suggested by others, and if you are using a VGA connection, see if you can connect your external display via the display port connection to see if the symptoms go away.
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Switching graphics mode (9600m gt) - OSX hangs at subsequent login screen

Haven't been able to find anything on this. When I switch the graphics mode through the Energy Saver Preferences (whether from battery life to performance or vice versa), it takes me back to the login screen as it should, but the computer hangs there, sometimes for upwards of five minutes.
The cursor in the password field blinks but it takes no input. Plugging in an external keyboard makes no difference. The mouse pointer can be moved but clicking has no effect. After a few minutes, any inputs you've attempted to make rush back in at once and it works as usual.
I'm not sure when this started, but it's been happening since at least 10.6.5.

Hi there,
I am new to Mac and got my MBP i7 2.0GHz, 8GB, SSD, OSX Lion 10.7.2 last month. Have you guys got any solution for the slow rendering of Youtube video? On my new MBP it can only run at resolution: 240p.
The same video on Youtube at HD resolution runs perfectly on my old HP Core Duo laptop. Slightly dissapointed with Mac here. Tried to look around for solution via Google but no luck.
It seems like no one from Apple support provides any solution for this problem. Are there any support at all from Apple???

Loading data and printing it out in graphic mode(is it possible)

if you are in graphic mode and you have a nice back ground and loader and stuff is it possible to load a pile and post it on screen? i want to know and if u can post a little code
i also use netbeam so if its possible it would be easy
here is a working loaded but just black and white
//Readlogin.java
import java.util.*;
import java.io.*;
import java.awt.*;
import javax.swing.*;
public class Readlogin
     public static void main(String[] args)
          FileOutputStream out;
          PrintStream p = null;
          boolean quit = false;
          String fileName = "", fileLine = "", date = "", classes = "";
          Scanner file = null;
          Scanner s = new Scanner(System.in);
          double exitword, sample;
          while (!quit)
               System.out.print ("Enter a filename: ");
               fileName = s.nextLine();
               if (fileName.equals("quit"))
               System.exit(0);
               else
          try
               file = new Scanner(new File(fileName));
          catch (FileNotFoundException e)
               System.out.println (fileName + " not found!");
               //System.exit(-1);
          while (file.hasNext())
               fileLine = file.nextLine();
               System.out.println(fileLine);
}ty
Edited by: kingryanj on Feb 28, 2008 5:37 PM

first this is not home work, my school website is www.mrdig.net, im in imc3 or whatever class and im done work for the year this is for my own stuff
i ment this is my reader file //logtest.java
import java.util.*;
import java.io.*;
import java.awt.*;
import javax.swing.*;
public class logtest
     public static void main(String[] args)
          FileOutputStream out;
          PrintStream p = null;
          boolean quit = false;
          String fileName = "", fileLine = "", date = "", classes = "";
          Scanner file = null;
          Scanner s = new Scanner(System.in);
          double exitword, sample;
          System.out.print ("Enter the date: ");
          date = s.nextLine();
          while (!quit)
               System.out.print ("Enter a filename: ");
               fileName = s.nextLine();
               if (fileName.equals("quit"))
               System.exit(0);
               else
          try
               out = new FileOutputStream(fileName, true);
               p = new PrintStream( out );
          catch (Exception e)
               System.out.println ("Error writing to file");
               System.exit(-1);
          System.out.print ("What classes are you doing? : ");
          classes = s.nextLine();
          p.print( date + " ");
          p.print(classes + " ");
          p.println ( "" );
          p.close();
}i want to know if you can load a file and print the data on screen in graphic mode, because i just want this to look more flashy, i have the actualy log in working with graphics (ty netbean) and i want to know if netbean can help with this

Graphic mode 16X

Similar Messages

Maybe you are looking for