Graphic shows in landscape, disappears in portrait

I placed a graphic in a 3 column grid landscape layout. Through the Widget menu I applied a caption. Through the Wrap menu I applied Float and Object Causes Wrap.
When I switch to Portrait mode - the graphic just isn't there. It's not anywhere - I checked the whole document.
I was hoping to get the graphic to appear in the same spot in the running text in both Portrait and Landscape.
Am I missing something here? Applying the wrap incorrectly? Is this a glitch in iBooks Author?

I've looked into this issue further - your advice appears to be bad. The option to "share with portrait" (under the Layout inspector) appears to only be available for images that are on master pages.
I'm still learning this program so I'm definitely no expert. If you can further explain what you meant or correct yourself, I'd appreciate it.

Similar Messages

Why do some pages disappear in portrait mode?

iBooks Author 1.1
I created a new template page when I authored a book. I added this page to the end of several chapters. When I preview the book in ipad the page shows up in landscape mode but disappears in portrait mode. It is composed simply of two text fields.
Any ideas?
Thank you,
Scott

Not sure whether this applies to your sitation, I suggested this as a last straw…
Click on the layout page for the affected pages in the top section on the pane on the left. In the inspector, click the layout tab and select the layout pane. Near the bottom is a tickbox "Shared with portrait layout".
I tried to attach a screenshot, and Safari lets me select an image to attach, but the "Insert" button remains greyed out. I tried jpg, tiff, and png, no luck. I've attached images before and noticed that I sometimes have to try two or three times before the "Insert" button becomes active after selecting an image. This time, it didn't work at all, sorry.
Michi.

CS5 - Graphic with feathered edge disappears when exported to PDF

I just ran into an odd problem, and unfortunately the book got printed before we saw the problem … ugh!
I set up a chapter header for a book. It was a graphic of wood to which I added a 0p9 feathered edge. In a text box on top of this, I put the chapter name in white type. They were both on the same layer, but the text box was on top.
I didn't notice at the time that when I exported the page to PDF, the graphic disappeared … and since the type was white, the whole chapter header was invisible. If I opened the PDF in Acrobat Pro using Pitstop, I could select a box where it was supposed to be, but couldn't make it show up.
I tried creating another layer and moving the text up to that; no good. The only way I was eventually able to make that darn wood graphic show up on the PDF was if I shut off the feathered edge.
Now I know I've used a feathered edge frequently, and have never run into this problem before. Does anyone have any idea why this time should be any different? There's was no color other than black, only one layer, and nothing was set to non-printing. I used the same export settings I always use. Stumped here … and very unhappy that we missed it and printed the book without the headers (my fault for not catching it, but doesn't make me any happier).
Specs:
Mac OS 10.5.8
InDesign CS5 (version 7.0)
Export setting - set to print to Acrobat 8/9 compatibility (PDF 1.7) with crop marks on
Hoping someone has some insight here. It's too late for the current job, but I'd like to know why it did it so I can avoid the problem in the future.

Hi John,
My InDesign files are too big to upload anywhere, but these two screen shots show an example of this problem.
This is how the spread looks in InDesign (link and effect info for right image shown):
... and this is how the exported PDF spread looks (normal "Press Quality" export setting):
As you can see, several, but not all, objects with transparent effects have disappeared.

Isolating images in Landscape vs. Portrait

I'm having a weird problem with images. I'm not sure what the exact term is for this function, but normally if I tap on an image in landscape or portrait mode (assuming the image is in the media track in the latter mode), the image will isolate and fill up the screen. I'll call this isolate mode (it's also where you can toggle on or off the title/caption of the image, or click the X in the top left to return from the image back to the previous page you were on).
For some reason however, there are a few images in my file that won't isolate in landscape mode. I know that an image has to have a caption and/or title to work in isolate mode. But beyond that, even some images in landscape mode that have a title still won't isolate. At first, this seemed to be arbitrary. But after looking through my book (which is about 800 pages with 700+ images), I've noticed that it seems to be confined to images that I've placed that lay over a complete textbox area that's on my template.
For example, I have one template page with two large text boxes side by side (basically a normal landscape page divided in half, recreating a facing pages-type layout). If, then, on a landscape page using this layout, I then place an image over the same area size as one of these text boxes (basically covering it up exactly), even if the image has a title and/or caption, it still won't isolate when I finally export the file. However, the image will show up and isolate in portrait mode.
Is this a glitch, or something about the spec I'm missing?

make sure your image is above your textbox (bring to front under "arrange")
and make sure "full screen" is selected.
Hope that helps

When I take a photo or video in landscape mode, it will not play back or show in landscape with the phone held horizontally.

When I take a photo or video in landscape mode, it will not play back or show in landscape with the phone held horizontally. i have an iPhone 5. I think this happened sometime after the last upgrade but I am not sure when. is there a setting on the phone that may have gotten changed somehow?

Slide your finger up from the bottom of the screen to reveal the Controls panel. One button controls orientation lock to prevent the screen rotating as you rotate the phone. You can toggle that control on and off as you need. Slide the panel back down when you are finished with it.

Contact picture showing in landscape

After adding contact picture in contact list while dialing contact no picture showing in landscape mode

But when you initiale a call to someone,the dialer is in normal view,not horizontal.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

HT1322 No graphics showing on screen

No Graphics showing on my screen only faint lines.

Reset the iPod
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
If this doesn't work, bring it to Apple Store or 3rd Party service vendor.
Good Luck!

ITunes "TV Shows" tab has disappeared.

When i downloaded iTunes 9, i noticed that the TV Shows tab had disappeared from the iTunes store. I thought maybe Apple had decided to stop selling TV Shows, but then a few days back my friend told me about how she downloaded all the episodes of her favourite show so she could watch them whenever she liked! I was interested, as i also love that show, and asked her where she had downloaded them. She replied that she had bought them off iTunes store. And so after a little investigation, i found i was the only one with this problem.
I contacted iTunes about this yesterday via email, but was replied to with links to iTunes store help. As if i hadn't checked all the help and assistance topics already!!!
Today i was quintuple-checking the help topics, and found the forums. So i'm posting here in the hopes that someone realises that i'm neither lazy or stupid enough not to check the help topics, and i've also searched the forums. I didn't find any other topics stating the same problem, so here we are.
Does anyone know how i can fix this?

What country are you in?
Not all countries have TV show content in the iTS. For example, Greece, Belgium, China, Romania....erm, it might be easier to list the countries that DO have TV content.
Scroll down to the bottom of the iTS home page. The bottom right corner has a flag icon to change the country's store, in case you've wandered away from your usual page.

Portrait Video shows in Landscape

I shot video in Portrait view. I synced it to iPhoto, dragged it back to iTunes and synced it back to my iPhone. (a tedious and odd process)
But now iPod on the iPhone wants to show my portrait video in landscape. How do I view it in portrait?

I used to have issue like this and I found the root cause was that I thought I was shooting in portrait mode...because the iPhone was upright...however, the small camera icon that moves when you go between portrait and landscape mode were not properly adjusting between the two modes...a hard reset should fix that...or maybe a full restore if a reset doesn't resolve it...
If you do see the camera icon moving between the modes as you rotate iPhone then I'm not sure what's happening...but I'd go ahead and do a full restore...I just checked my synced vids shot with iPhone and both portrait and landscape vids show correctly as shot inside iPhone and iPhoto

Printing graphics object in Landscape or portrait mode

Hello,
I have a graphics 2d object (a Tree Diagram) which is inside a JScrollPane,and the JSCrollPane is on a JPanel. it's length and width is more than one page. I am using a printable object to print the object. The task I need to do is,
(1). compress the width and length of the diagram, so that if can fit into one page, else split the diagram into pages, so that each part of it can be printed on different pages(page size A4) and then later those pages can be merged accordingly.
I am not able to find, how to split the graphic object(the tree diagram into pages), shoul d I try doing it using x and y co ordinate of the graphic object.

* PrintUtilities.java
* Created on January 17, 2007, 7:25 PM
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package action.vector.bam;
* @author serjith
import java.awt.*;
import javax.swing.*;
import java.awt.print.*;
import javax.print.attribute.HashPrintRequestAttributeSet;
import javax.print.attribute.PrintRequestAttributeSet;
/** A simple utility class that lets you very simply print
* an arbitrary component. Just pass the component to the
* PrintUtilities.printComponent. The component you want to
* print doesn't need a print method and doesn't have to
* implement any interface or do anything special at all.
* <P>
* If you are going to be printing many times, it is marginally more
* efficient to first do the following:
* <PRE>
* PrintUtilities printHelper = new PrintUtilities(theComponent);
* </PRE>
* then later do printHelper.print(). But this is a very tiny
* difference, so in most cases just do the simpler
* PrintUtilities.printComponent(componentToBePrinted).
* 7/99 Marty Hall, http://www.apl.jhu.edu/~hall/java/
* May be freely used or adapted.
public class PrintUtilities implements Printable {
private Component componentToBePrinted;
public static void printComponent(Component c) {
new PrintUtilities(c).print();
public PrintUtilities(Component componentToBePrinted) {
this.componentToBePrinted = componentToBePrinted;
public void print() {
PrinterJob printJob = PrinterJob.getPrinterJob();
PrintRequestAttributeSet set = new HashPrintRequestAttributeSet();
PageFormat pgFormat = printJob.pageDialog(set);
printJob.setPrintable(this,pgFormat);
//printJob.setPrintable(this);
if (printJob.printDialog())
try {
printJob.print();
} catch(PrinterException pe) {
System.out.println("Error printing: " + pe);
public int print(Graphics g, PageFormat pageFormat, int pageIndex) {
if (pageIndex > 0) { // requires change since it is bigger than a single page
return(NO_SUCH_PAGE);
} else {
Graphics2D g2d = (Graphics2D)g;
g2d.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
disableDoubleBuffering(componentToBePrinted);
int W = componentToBePrinted.getWidth();
int H = componentToBePrinted.getHeight();
//Component newComp = componentToBePrinted.getGraphics().clipRect();
System.out.println("WorkSpace Height "+H+" Width "+W);
pageFormat.getHeight();
pageFormat.getWidth();
pageFormat.setOrientation(PageFormat.LANDSCAPE);
//componentToBePrinted.paint(g2d);
componentToBePrinted.printAll(g2d);//.paintAll(g2d);
enableDoubleBuffering(componentToBePrinted);
return(PAGE_EXISTS);
/** The speed and quality of printing suffers dramatically if
* any of the containers have double buffering turned on.
* So this turns if off globally.
* @see enableDoubleBuffering
public static void disableDoubleBuffering(Component c) {
RepaintManager currentManager = RepaintManager.currentManager(c);
currentManager.setDoubleBufferingEnabled(false);
/** Re-enables double buffering globally. */
public static void enableDoubleBuffering(Component c) {
RepaintManager currentManager = RepaintManager.currentManager(c);
currentManager.setDoubleBufferingEnabled(true);
=============================================================
Please find this code, which I am trying to use, here I am passing the JPanel
try{
PrintUtilities.printComponent(actWorkSpace);
}catch(Exception ex){
ex.printStackTrace();
the actWorkSpace is a JPanel with graphics as mentioned above, which is being passes to PrintUtilities.printComponent();
the output is only just a single page with just a portion of the graphics on the JPanel, pls help...... it is urgent....

Landscape pages and portrait pages into the same document ?

Hi everybody,
I have a report to do, and I would like to introduce a graphic into the document.
To do so, I need to switch from a portrait format to a landscape format, and back to a portrait format, to follow the explications.
How to do so?
Thanks in advance
PS: sorry 4 my english I'm not a native speaker.

Ok, thanks a lot.
But what about page numbering?
I could make it .
But, if I rotate the picture through the metrics. I find the page numbering on the right bottom .
But , it should be on the top right and rotated.
do you have any suggestion for this detail.
Have a nice day.

Showing pictures iphone 4 only portrait mode

Hi, when I look at pictures in my Ipone 4 they only show up in portrait mode. It vill not work "turning the phone" showing the pictures in landscape. This goes as well for writing sms etc, only possible in portrait mode. ANy idea about the problem and how to solve it?

Orientation lock is most likely on. Double tap the home button...swipe left to right...far left is the orientation lock button...tap on/off.

Airprint - Landscape vs. Portrait printing

If you print a landscape PDF file through the Airprint function there is no options to print Portait vs. landscape. This shrinks the document considerable and can make it unreadable.
Is there any way to rotate this item prior to printing? Is there an airprint setting to always print the pdf's based on their orientation?

Googull-
Since GoodReader is capable of changing page orientation, the problem is most likely application oriented rather than AirPrint oriented. The Mail program is either printing a spreadsheet, or it is handing the task off to another application. Either could provide a rotation option but doesn't.
I have a similar problem printing images. The only option is a snapshot-size print, although it seems to choose landscape or portrait appropriately. I reported the problem to Apple soon after iOS 4 came out for the iPad.
Apple is so wildly successful with the iPad, that fixing applications appears to be taking a back seat to hardware development. They should be thoroughly embarrassed by several different printing problems, but show no sign of wanting to resolve them. In my opinion, they should abandon AirPrint, or at least provide an alternate set of popular printer drivers including PostScript. Of course that won't help if a rotation option is not available in the Application!
Fred

How do I crop landscape pictures in portrait with 2:3 ratio?

When I have a landscape picture and want it to crop in portrait format I don't know how to do it. I want to crop it in 3:2 ratio. When I enter that ratio it shows an 2:3 and not in 3:2 ratio. That way it's impossible to crop that image in a fixed 3:2 ratio.

Once the landscape crop is up, grab the corner and drag it across. The whole thing will flip. You'll get the hang of it if you play with it.

TOC will not show in landscape view

I'm not sure what I did, but I can not get the TOC to show up in the landscape view. It shows fine in portrait. All I have is this box with a blue outline and no text. Any ideas? I've sent everything else to the back and even went to the length of deleting everything, but I can't get it to show

I think I figured it out. I was un-aware that in landscape the TOC only shows sections, not paragraph styles like in portrait. Since I didn't have any sections in my chapter it didn't show anything. Super frustrating to say the least!!

Graphic shows in landscape, disappears in portrait

Similar Messages

Maybe you are looking for