Graphic Software Not Optimised?
I'm heading off to college in a few days, and i am looking into buying an iMac for my multimedia and graphic design course. We will be using Microsoft Office, Adobe Photoshop CS, Adobe Illustrator CS, Adobe InDesign CS, Macromedia Dreamweaver, Macromedia Flash and Final Cut Pro. I've heard that because of the iMac's increased processor speed there is a problem with the software not being fast enough, has the software been updated yet? If not when is it expected to be updated?
Regards,
Jack Nichols
The software you are talking about was written to run on PowerPC processors. Macs now have Intel processors, rendering PowerPC code unusable. To get around this, Apple have included an application called Rosetta with Intel Macs. This translates PowerPC code into Intel code as it is used, meaning PowerPC apps can be run on Intel processors. However, this uses up a fair bit of processing power and RAM, hence the reason they run slower than native Intel applications.
Final Cut Studio is now a Universal application (meaning it runs on both PowerPC and Intel processors), but as far as I'm aware the other applications you mention are not Universal. I would imagine however, it is more a question of "when" the Universal versions will appear, as opposed to "if" they will.
If I had to hazard a guess, I'd say they'll all be Universal apps within the next year.
Similar Messages
-
Certain graphics related softwares not running in Windows 8.1
There are certain programs that gives and error in while running in windows 8.1 , such as program has stopped working and all . I have fully updated my windows 8.1 but still there is no way out . The graphics driver software i.e. Intel HD Graphics also not works . Here are some screenshots . Is there anyway out of this .?
My drivers are all working fine . But they are not opening . I can't even run any game in my laptop . This problem occured earlier also . But after a windows update it didn't come . But later I refreshed my laptop once and now even in windows update the problem is not solved . Any solution for that ?
-
I ran the diagnostics test and the program was unable to detect a prerecorded cd. This is a fairly new problem and I am not sure what to do.
The results to the diagnostics test are below:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Dell Inc. Inspiron 5520
iTunes 11.0.4.4
QuickTime 7.7.4
FairPlay 2.4.14
Apple Application Support 2.3.4
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0035BB400AFA2018
Current user is not an administrator.
The current local date and time is 2013-07-14 17:29:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is supported.
Core Media is not supported. (16002)
Video Display Information
Intel Corporation, Intel(R) HD Graphics 4000
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.4.4 (x64) is currently running.
iTunesHelper 11.0.4.4 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.Hello queenabs,
It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting the error, "disc burner or software not found." I found a couple of resources that I think might help with an error like this.
I recommend starting with the steps in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Best,
Sheila M. -
ATI Graphics card not detected on cold boot, works on warm boot
Hi All,
I hope you can help me out with this.
I'm using Radeon HD7850 with ATI-Catalyst.
The issue is, if I do a cold boot (physically turn off the power, turn back on) the system won't boot into X, only tty.
At this point, a reboot works fine.
Or if I don't turn off the power, just shutdown and reboot (warm boot), it works ok.
Here's the Xorg log on cold boot:
[ 2.226]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 2.226] X Protocol Version 11, Revision 0
[ 2.226] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 2.226] Current Operating System: Linux dmanPC 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012 x86_64
[ 2.226] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=3766a71b-dbfe-4cc2-b7bd-948878b5da67 ro nomodeset quiet
[ 2.226] Build Date: 27 August 2012 08:04:39AM
[ 2.226]
[ 2.226] Current version of pixman: 0.26.2
[ 2.226] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2.226] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.226] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 28 05:57:41 2012
[ 2.227] (==) Using config file: "/etc/X11/xorg.conf"
[ 2.228] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2.228] (==) ServerLayout "aticonfig Layout"
[ 2.228] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2.228] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2.229] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2.229] (==) Automatically adding devices
[ 2.229] (==) Automatically enabling devices
[ 2.231] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2.231] Entry deleted from font path.
[ 2.231] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2.231] Entry deleted from font path.
[ 2.231] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2.231] Entry deleted from font path.
[ 2.231] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2.232] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2.232] Entry deleted from font path.
[ 2.232] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2.232] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 2.232] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2.232] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2.232] (II) Loader magic: 0x7c8b00
[ 2.232] (II) Module ABI versions:
[ 2.232] X.Org ANSI C Emulation: 0.4
[ 2.232] X.Org Video Driver: 12.1
[ 2.232] X.Org XInput driver : 16.0
[ 2.232] X.Org Server Extension : 6.0
[ 2.232] (--) PCI:*(0:7:0:0) 1002:6819:1462:2730 rev 0, Mem @ 0xe0000000/268435456, 0xf7b00000/262144, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
[ 2.232] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2.232] (II) "extmod" will be loaded by default.
[ 2.232] (II) "dbe" will be loaded by default.
[ 2.232] (II) "glx" will be loaded by default.
[ 2.232] (II) "record" will be loaded by default.
[ 2.232] (II) "dri" will be loaded by default.
[ 2.232] (II) "dri2" will be loaded by default.
[ 2.232] (II) LoadModule: "extmod"
[ 2.233] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2.233] (II) Module extmod: vendor="X.Org Foundation"
[ 2.233] compiled for 1.12.4, module version = 1.0.0
[ 2.233] Module class: X.Org Server Extension
[ 2.233] ABI class: X.Org Server Extension, version 6.0
[ 2.233] (II) Loading extension MIT-SCREEN-SAVER
[ 2.233] (II) Loading extension XFree86-VidModeExtension
[ 2.233] (II) Loading extension XFree86-DGA
[ 2.233] (II) Loading extension DPMS
[ 2.233] (II) Loading extension XVideo
[ 2.233] (II) Loading extension XVideo-MotionCompensation
[ 2.233] (II) Loading extension X-Resource
[ 2.233] (II) LoadModule: "dbe"
[ 2.233] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2.234] (II) Module dbe: vendor="X.Org Foundation"
[ 2.234] compiled for 1.12.4, module version = 1.0.0
[ 2.234] Module class: X.Org Server Extension
[ 2.234] ABI class: X.Org Server Extension, version 6.0
[ 2.234] (II) Loading extension DOUBLE-BUFFER
[ 2.234] (II) LoadModule: "glx"
[ 2.234] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2.236] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2.236] compiled for 6.9.0, module version = 1.0.0
[ 2.236] (II) Loading extension GLX
[ 2.236] (II) LoadModule: "record"
[ 2.236] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2.237] (II) Module record: vendor="X.Org Foundation"
[ 2.237] compiled for 1.12.4, module version = 1.13.0
[ 2.237] Module class: X.Org Server Extension
[ 2.237] ABI class: X.Org Server Extension, version 6.0
[ 2.237] (II) Loading extension RECORD
[ 2.237] (II) LoadModule: "dri"
[ 2.237] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2.237] (II) Module dri: vendor="X.Org Foundation"
[ 2.237] compiled for 1.12.4, module version = 1.0.0
[ 2.237] ABI class: X.Org Server Extension, version 6.0
[ 2.237] (II) Loading extension XFree86-DRI
[ 2.237] (II) LoadModule: "dri2"
[ 2.238] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2.238] (II) Module dri2: vendor="X.Org Foundation"
[ 2.238] compiled for 1.12.4, module version = 1.2.0
[ 2.238] ABI class: X.Org Server Extension, version 6.0
[ 2.238] (II) Loading extension DRI2
[ 2.238] (II) LoadModule: "fglrx"
[ 2.238] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 2.262] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 2.262] compiled for 1.4.99.906, module version = 8.98.2
[ 2.262] Module class: X.Org Video Driver
[ 2.262] (II) Loading sub module "fglrxdrm"
[ 2.262] (II) LoadModule: "fglrxdrm"
[ 2.262] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2.263] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2.263] compiled for 1.4.99.906, module version = 8.98.2
[ 2.263] (II) AMD Proprietary Linux Driver Version Identifier:8.98.2
[ 2.263] (II) AMD Proprietary Linux Driver Release Identifier: 8.982
[ 2.263] (II) AMD Proprietary Linux Driver Build Date: Jul 27 2012 20:37:56
[ 2.263] (++) using VT number 8
[ 2.264] (WW) Falling back to old probe method for fglrx
[ 2.269] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 2.271] (WW) fglrx: No matching Device section for instance (BusID ) found
[ 2.271] (EE) No devices detected.
[ 2.271]
Fatal server error:
[ 2.271] no screens found
[ 2.271]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2.271] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2.271]
Here's the same log for warm boot:
[ 2.289] (++) using VT number 8
[ 2.290] (WW) Falling back to old probe method for fglrx
[ 2.295] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 2.296] (--) Chipset Supported AMD Graphics Processor (0x6819) found
[ 2.296] (WW) fglrx: No matching Device section for instance (BusID PCI:0@6:0:1) found
[ 2.297] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 2.297] (II) AMD Video driver is signed
[ 2.297] (II) fglrx(0): pEnt->device->identifier=0x82b7a0
[ 2.297] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 2.297] (II) Loading sub module "vgahw"
[ 2.297] (II) LoadModule: "vgahw"
[ 2.298] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 2.298] (II) Module vgahw: vendor="X.Org Foundation"
[ 2.298] compiled for 1.12.4, module version = 0.1.0
[ 2.298] ABI class: X.Org Video Driver, version 12.1
[ 2.298] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 2.298] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2.298] (==) fglrx(0): Default visual is TrueColor
[ 2.298] (**) fglrx(0): Option "OpenGLOverlay" "0"
[ 2.298] (**) fglrx(0): Option "DPMS" "true"
[ 2.298] (==) fglrx(0): RGB weight 888
[ 2.298] (II) fglrx(0): Using 8 bits per RGB
[ 2.298] (==) fglrx(0): Buffer Tiling is ON
[ 2.299] (II) Loading sub module "fglrxdrm"
[ 2.299] (II) LoadModule: "fglrxdrm"
[ 2.299] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2.299] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2.299] compiled for 1.4.99.906, module version = 8.98.2
[ 2.299] ukiDynamicMajor: found major device number 251
[ 2.299] ukiDynamicMajor: found major device number 251
[ 2.299] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[ 2.299] ukiOpenDevice: node name is /dev/ati/card0
[ 2.299] ukiOpenDevice: open result is 11, (OK)
[ 2.299] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2.299] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[ 2.299] (**) fglrx(0): NoAccel = NO
[ 2.299] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 2.299] (--) fglrx(0): Chipset: "AMD Radeon HD 7800 Series " (Chipset = 0x6819)
[ 2.299] (--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x2730)
[ 2.299] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 2.299] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 2.299] (--) fglrx(0): MMIO registers at 0xf7c00000
[ 2.299] (--) fglrx(0): I/O port at 0x0000c000
[ 2.299] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 2.300] (II) fglrx(0): AC Adapter is used
[ 2.303] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 2.303] (II) Loading sub module "vbe"
[ 2.303] (II) LoadModule: "vbe"
[ 2.303] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 2.304] (II) Module vbe: vendor="X.Org Foundation"
[ 2.304] compiled for 1.12.4, module version = 1.1.0
[ 2.304] ABI class: X.Org Video Driver, version 12.1
[ 2.304] (II) fglrx(0): VESA BIOS detected
[ 2.304] (II) fglrx(0): VESA VBE Version 3.0
[ 2.304] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 2.304] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 2.304] (II) fglrx(0): VESA VBE OEM Software Rev: 15.17
[ 2.304] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 2.304] (II) fglrx(0): VESA VBE OEM Product: PITCAIRN
[ 2.304] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 2.309] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 2.309] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 2.309] (II) fglrx(0): PCIE card detected
[ 2.309] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 2.309] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 2.311] (II) fglrx(0): Using adapter: 6:0.0.
[ 2.320] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 2.458] (II) fglrx(0): Interrupt handler installed at IRQ 48.
[ 2.458] (II) fglrx(0): RandR 1.2 support is enabled!
[ 2.458] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 2.458] (==) fglrx(0): Center Mode is disabled
[ 2.458] (II) Loading sub module "fb"
[ 2.458] (II) LoadModule: "fb"
[ 2.458] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2.461] (II) Module fb: vendor="X.Org Foundation"
[ 2.461] compiled for 1.12.4, module version = 1.0.0
[ 2.461] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.461] (II) Loading sub module "ddc"
[ 2.461] (II) LoadModule: "ddc"
[ 2.461] (II) Module "ddc" already built-in
[ 2.571] (II) fglrx(0): Finished Initialize PPLIB!
[ 2.577] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 2.577] (II) fglrx(0): Output DFP2 has no monitor section
[ 2.577] (II) fglrx(0): Output DFP3 has no monitor section
[ 2.577] (II) fglrx(0): Output DFP4 has no monitor section
[ 2.577] (II) fglrx(0): Output DFP5 has no monitor section
[ 2.577] (II) fglrx(0): Output DFP6 has no monitor section
[ 2.577] (II) fglrx(0): Output DFP7 has no monitor section
[ 2.577] (II) fglrx(0): Output DFP8 has no monitor section
[ 2.577] (II) fglrx(0): Output DFP9 has no monitor section
[ 2.577] (II) fglrx(0): Output DFP10 has no monitor section
[ 2.577] (II) fglrx(0): Output CRT1 has no monitor section
[ 2.578] (II) Loading sub module "ddc"
[ 2.578] (II) LoadModule: "ddc"
[ 2.578] (II) Module "ddc" already built-in
[ 2.578] (II) fglrx(0): Connected Display0: DFP10
[ 2.578] (II) fglrx(0): Display0 EDID data ---------------------------
[ 2.578] (II) fglrx(0): Manufacturer: SAM Model: 524 Serial#: 1280455218
[ 2.578] (II) fglrx(0): Year: 2009 Week: 20
[ 2.578] (II) fglrx(0): EDID Version: 1.3
[ 2.578] (II) fglrx(0): Digital Display Input
[ 2.578] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 2.578] (II) fglrx(0): Gamma: 2.20
[ 2.578] (II) fglrx(0): DPMS capabilities: Off
[ 2.578] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2.578] (II) fglrx(0): First detailed timing is preferred mode
[ 2.578] (II) fglrx(0): redX: 0.648 redY: 0.339 greenX: 0.143 greenY: 0.070
[ 2.578] (II) fglrx(0): blueX: 0.282 blueY: 0.603 whiteX: 0.312 whiteY: 0.329
[ 2.578] (II) fglrx(0): Supported established timings:
[ 2.578] (II) fglrx(0): 640x480@60Hz
[ 2.578] (II) fglrx(0): 800x600@56Hz
[ 2.578] (II) fglrx(0): 800x600@60Hz
[ 2.578] (II) fglrx(0): 1024x768@60Hz
[ 2.578] (II) fglrx(0): Manufacturer's mask: 0
[ 2.578] (II) fglrx(0): Supported standard timings:
[ 2.578] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 2.578] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 2.578] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2.578] (II) fglrx(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 2.578] (II) fglrx(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 2.578] (II) fglrx(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 2.578] (II) fglrx(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 2.578] (II) fglrx(0): Monitor name: SyncMaster
[ 2.578] (II) fglrx(0): Serial No: HMBS500385
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 74.2 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 74.2 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 27.0 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 27.0 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 2.578] (II) fglrx(0): Number of EDID sections to follow: 1
[ 2.578] (II) fglrx(0): EDID (in hex):
[ 2.578] (II) fglrx(0): 00ffffffffffff004c2d24053232524c
[ 2.578] (II) fglrx(0): 1413010380301b782a3851a656241248
[ 2.578] (II) fglrx(0): 9a50542308008100814081809500a940
[ 2.578] (II) fglrx(0): b30001010101023a801871382d40582c
[ 2.578] (II) fglrx(0): 4500dd0c1100001e000000fd00383c1e
[ 2.578] (II) fglrx(0): 5111000a202020202020000000fc0053
[ 2.578] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 2.578] (II) fglrx(0): 00484d42533530303338350a20200168
[ 2.578] (II) fglrx(0): End of Display0 EDID data --------------------
[ 2.578] (II) fglrx(0): EDID for output DFP1
[ 2.578] (II) fglrx(0): EDID for output DFP2
[ 2.578] (II) fglrx(0): EDID for output DFP3
[ 2.578] (II) fglrx(0): EDID for output DFP4
[ 2.578] (II) fglrx(0): EDID for output DFP5
[ 2.578] (II) fglrx(0): EDID for output DFP6
[ 2.578] (II) fglrx(0): EDID for output DFP7
[ 2.578] (II) fglrx(0): EDID for output DFP8
[ 2.578] (II) fglrx(0): EDID for output DFP9
[ 2.578] (II) fglrx(0): EDID for output DFP10
[ 2.578] (II) fglrx(0): Manufacturer: SAM Model: 524 Serial#: 1280455218
[ 2.578] (II) fglrx(0): Year: 2009 Week: 20
[ 2.578] (II) fglrx(0): EDID Version: 1.3
[ 2.578] (II) fglrx(0): Digital Display Input
[ 2.578] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 2.578] (II) fglrx(0): Gamma: 2.20
[ 2.578] (II) fglrx(0): DPMS capabilities: Off
[ 2.578] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2.578] (II) fglrx(0): First detailed timing is preferred mode
[ 2.578] (II) fglrx(0): redX: 0.648 redY: 0.339 greenX: 0.143 greenY: 0.070
[ 2.578] (II) fglrx(0): blueX: 0.282 blueY: 0.603 whiteX: 0.312 whiteY: 0.329
[ 2.578] (II) fglrx(0): Supported established timings:
[ 2.578] (II) fglrx(0): 640x480@60Hz
[ 2.578] (II) fglrx(0): 800x600@56Hz
[ 2.578] (II) fglrx(0): 800x600@60Hz
[ 2.578] (II) fglrx(0): 1024x768@60Hz
[ 2.578] (II) fglrx(0): Manufacturer's mask: 0
[ 2.578] (II) fglrx(0): Supported standard timings:
[ 2.578] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 2.578] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 2.578] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2.578] (II) fglrx(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 2.578] (II) fglrx(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 2.578] (II) fglrx(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 2.578] (II) fglrx(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 2.578] (II) fglrx(0): Monitor name: SyncMaster
[ 2.578] (II) fglrx(0): Serial No: HMBS500385
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 74.2 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 74.2 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 27.0 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 27.0 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 2.578] (II) fglrx(0): Number of EDID sections to follow: 1
[ 2.578] (II) fglrx(0): EDID (in hex):
[ 2.578] (II) fglrx(0): 00ffffffffffff004c2d24053232524c
[ 2.578] (II) fglrx(0): 1413010380301b782a3851a656241248
[ 2.578] (II) fglrx(0): 9a50542308008100814081809500a940
[ 2.578] (II) fglrx(0): b30001010101023a801871382d40582c
[ 2.578] (II) fglrx(0): 4500dd0c1100001e000000fd00383c1e
[ 2.578] (II) fglrx(0): 5111000a202020202020000000fc0053
[ 2.578] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 2.578] (II) fglrx(0): 00484d42533530303338350a20200168
[ 2.579] (II) fglrx(0): Printing probed modes for output DFP10
[ 2.579] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 2.579] (II) fglrx(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 2.579] (II) fglrx(0): Modeline "1776x1000"x50.0 148.50 1776 2304 2348 2640 1000 1004 1009 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1680x1050"x50.0 148.50 1680 2448 2492 2640 1050 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 2.579] (II) fglrx(0): Modeline "1400x1050"x60.0 162.00 1400 1664 1856 2160 1050 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 2.579] (II) fglrx(0): Modeline "1400x1050"x50.0 148.50 1400 2448 2492 2640 1050 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1600x900"x60.0 162.00 1600 1664 1856 2160 900 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 2.579] (II) fglrx(0): Modeline "1600x900"x50.0 148.50 1600 2448 2492 2640 900 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x1024"x50.0 148.50 1280 2448 2492 2640 1024 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 2.579] (II) fglrx(0): Modeline "1440x900"x50.0 148.50 1440 2448 2492 2640 900 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x960"x50.0 148.50 1280 2448 2492 2640 960 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x800"x50.0 148.50 1280 2448 2492 2640 800 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x800"x60.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x768"x50.0 148.50 1280 2448 2492 2640 768 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x768"x60.0 83.50 1280 1352 1480 1680 768 803 809 831 -hsync +vsync (49.7 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 2.579] (II) fglrx(0): Modeline "1024x768"x50.0 148.50 1024 2448 2492 2640 768 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 2.579] (II) fglrx(0): Modeline "1152x648"x50.0 74.25 1152 1592 1632 1980 648 653 658 750 +hsync +vsync (37.5 kHz)
[ 2.579] (II) fglrx(0): Modeline "800x600"x50.0 148.50 800 2448 2492 2640 600 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 2.579] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "720x576"x60.0 148.50 720 2008 2052 2200 576 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 2.579] (II) fglrx(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "720x480"x50.0 148.50 720 2448 2492 2640 480 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 2.579] (II) fglrx(0): Modeline "640x480"x50.0 148.50 640 2448 2492 2640 480 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 2.579] (II) fglrx(0): EDID for output CRT1
[ 2.579] (II) fglrx(0): Output DFP1 disconnected
[ 2.579] (II) fglrx(0): Output DFP2 disconnected
[ 2.579] (II) fglrx(0): Output DFP3 disconnected
[ 2.579] (II) fglrx(0): Output DFP4 disconnected
[ 2.579] (II) fglrx(0): Output DFP5 disconnected
[ 2.579] (II) fglrx(0): Output DFP6 disconnected
[ 2.579] (II) fglrx(0): Output DFP7 disconnected
[ 2.579] (II) fglrx(0): Output DFP8 disconnected
[ 2.579] (II) fglrx(0): Output DFP9 disconnected
[ 2.579] (II) fglrx(0): Output DFP10 connected
[ 2.579] (II) fglrx(0): Output CRT1 disconnected
[ 2.579] (II) fglrx(0): Using exact sizes for initial modes
[ 2.579] (II) fglrx(0): Output DFP10 using initial mode 1920x1080
[ 2.579] (II) fglrx(0): DPI set to (96, 96)
[ 2.579] (II) fglrx(0): Eyefinity capable adapter detected.
[ 2.579] (II) fglrx(0): Adapter AMD Radeon HD 7800 Series has 6 configurable heads and 1 displays connected.
[ 2.579] (==) fglrx(0): PseudoColor visuals disabled
[ 2.579] (II) Loading sub module "ramdac"
[ 2.579] (II) LoadModule: "ramdac"
[ 2.579] (II) Module "ramdac" already built-in
[ 2.579] (==) fglrx(0): NoDRI = NO
[ 2.579] (==) fglrx(0): Capabilities: 0x00000000
[ 2.579] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 2.579] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 2.579] (==) fglrx(0): UseFastTLS=0
[ 2.579] (II) fglrx(0): Desktop Vsync is enabled.
[ 2.579] (--) Depth 24 pixmap format is 32 bpp
[ 2.579] (II) Loading extension ATIFGLRXDRI
[ 2.579] (II) fglrx(0): doing swlDriScreenInit
[ 2.579] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 2.579] ukiDynamicMajor: found major device number 251
[ 2.579] ukiDynamicMajor: found major device number 251
[ 2.579] ukiDynamicMajor: found major device number 251
[ 2.579] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[ 2.579] ukiOpenDevice: node name is /dev/ati/card0
[ 2.579] ukiOpenDevice: open result is 12, (OK)
[ 2.579] ukiOpenByBusid: ukiOpenMinor returns 12
[ 2.579] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[ 2.579] (II) fglrx(0): [uki] DRM interface version 1.0
[ 2.579] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:6:0:0"
[ 2.579] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 2.579] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f1426d74000
[ 2.579] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 2.579] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 2.579] (II) fglrx(0): swlDriScreenInit done
[ 2.579] (II) fglrx(0): Kernel Module Version Information:
[ 2.579] (II) fglrx(0): Name: fglrx
[ 2.579] (II) fglrx(0): Version: 8.98.2
[ 2.579] (II) fglrx(0): Date: Jul 27 2012
[ 2.579] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 2.579] (II) fglrx(0): Kernel Module version matches driver.
[ 2.579] (II) fglrx(0): Kernel Module Build Time Information:
[ 2.579] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.5.3-1-ARCH
[ 2.579] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 2.579] (II) fglrx(0): Build-Kernel __SMP__: no
[ 2.579] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 2.579] (II) fglrx(0): [uki] register handle = 0x00004000
[ 2.589] (II) fglrx(0): DRI initialization successfull
[ 2.590] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x010e0000
[ 2.591] (==) fglrx(0): Backing store disabled
[ 2.591] (II) Loading extension FGLRXEXTENSION
[ 2.591] (**) fglrx(0): DPMS enabled
[ 2.591] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 2.591] (**) fglrx(0): Textured Video is enabled.
[ 2.591] (II) LoadModule: "glesx"
[ 2.591] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 2.601] (II) Module glesx: vendor="X.Org Foundation"
[ 2.601] compiled for 1.4.99.906, module version = 1.0.0
[ 2.601] (II) Loading extension GLESX
[ 2.601] (II) fglrx(0): GLESX enableFlags = 592
[ 2.602] (II) fglrx(0): GLESX is enabled
[ 2.602] (II) LoadModule: "amdxmm"
[ 2.602] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 2.603] (II) Module amdxmm: vendor="X.Org Foundation"
[ 2.603] compiled for 1.4.99.906, module version = 2.0.0
[ 2.615] (II) Loading extension AMDXVOPL
[ 2.615] (II) Loading extension AMDXVBA
[ 2.617] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 2.618] (II) fglrx(0): Enable composite support successfully
[ 2.618] (WW) fglrx(0): Option "VendorName" is not used
[ 2.618] (WW) fglrx(0): Option "ModelName" is not used
[ 2.618] (II) fglrx(0): X context handle = 0x1
[ 2.618] (II) fglrx(0): [DRI] installation complete
[ 2.618] (==) fglrx(0): Silken mouse enabled
[ 2.618] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 2.618] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 2.735] (II) fglrx(0): Framebuffer compression enabled: mcAddr=0xf407a40000 width=0xa00 height=0x3267
[ 2.735] (--) RandR disabled
[ 2.735] (II) Initializing built-in extension Generic Event Extension
[ 2.735] (II) Initializing built-in extension SHAPE
[ 2.735] (II) Initializing built-in extension MIT-SHM
[ 2.735] (II) Initializing built-in extension XInputExtension
[ 2.735] (II) Initializing built-in extension XTEST
[ 2.735] (II) Initializing built-in extension BIG-REQUESTS
[ 2.735] (II) Initializing built-in extension SYNC
[ 2.735] (II) Initializing built-in extension XKEYBOARD
[ 2.735] (II) Initializing built-in extension XC-MISC
[ 2.735] (II) Initializing built-in extension SECURITY
[ 2.735] (II) Initializing built-in extension XINERAMA
[ 2.735] (II) Initializing built-in extension XFIXES
[ 2.735] (II) Initializing built-in extension RENDER
[ 2.735] (II) Initializing built-in extension RANDR
[ 2.735] (II) Initializing built-in extension COMPOSITE
[ 2.735] (II) Initializing built-in extension DAMAGE
[ 2.736] ukiDynamicMajor: found major device number 251
[ 2.736] ukiDynamicMajor: found major device number 251
[ 2.736] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[ 2.736] ukiOpenDevice: node name is /dev/ati/card0
[ 2.736] ukiOpenDevice: open result is 13, (OK)
[ 2.736] ukiOpenByBusid: ukiOpenMinor returns 13
[ 2.736] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[ 2.842] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 2.857] (II) fglrx(0): Enable the clock gating!
[ 2.872] (II) fglrx(0): Desktop Vsync is enabled.
[ 2.872] (II) fglrx(0): Setting screen physical size to 508 x 285
[ 2.901] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2.901] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2.901] (II) LoadModule: "evdev"
[ 2.901] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2.902] (II) Module evdev: vendor="X.Org Foundation"
[ 2.902] compiled for 1.12.3.901, module version = 2.7.3
[ 2.902] Module class: X.Org XInput Driver
[ 2.902] ABI class: X.Org XInput driver, version 16.0
[ 2.902] (II) Using input driver 'evdev' for 'Power Button'
[ 2.902] (**) Power Button: always reports core events
[ 2.902] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2.902] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2.902] (--) evdev: Power Button: Found keys
[ 2.902] (II) evdev: Power Button: Configuring as keyboard
[ 2.902] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 2.902] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2.902] (**) Option "xkb_rules" "evdev"
[ 2.902] (**) Option "xkb_model" "evdev"
[ 2.902] (**) Option "xkb_layout" "us"
[ 2.902] (**) Option "xkb_variant" "dvp"
[ 2.913] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 2.913] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2.913] (II) Using input driver 'evdev' for 'Power Button'
[ 2.913] (**) Power Button: always reports core events
[ 2.913] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 2.913] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2.913] (--) evdev: Power Button: Found keys
[ 2.913] (II) evdev: Power Button: Configuring as keyboard
[ 2.913] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 2.913] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2.913] (**) Option "xkb_rules" "evdev"
[ 2.913] (**) Option "xkb_model" "evdev"
[ 2.913] (**) Option "xkb_layout" "us"
[ 2.913] (**) Option "xkb_variant" "dvp"
[ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event14)
[ 2.913] (II) No input driver specified, ignoring this device.
[ 2.913] (II) This device may have been added with another device file.
[ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event15)
[ 2.913] (II) No input driver specified, ignoring this device.
[ 2.913] (II) This device may have been added with another device file.
[ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event16)
[ 2.913] (II) No input driver specified, ignoring this device.
[ 2.913] (II) This device may have been added with another device file.
[ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event17)
[ 2.913] (II) No input driver specified, ignoring this device.
[ 2.913] (II) This device may have been added with another device file.
[ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event18)
[ 2.913] (II) No input driver specified, ignoring this device.
[ 2.913] (II) This device may have been added with another device file.
[ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event19)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event4)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event5)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event6)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event8)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event12)
[ 2.914] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 2.914] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 2.914] (**) Logitech USB Receiver: always reports core events
[ 2.914] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event12"
[ 2.914] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 2.914] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 2.914] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 2.914] (--) evdev: Logitech USB Receiver: Found relative axes
[ 2.914] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 2.914] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 2.914] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 2.914] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 2.914] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2.914] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7:1.0/input/input12/event12"
[ 2.914] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
[ 2.914] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 2.915] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 2.915] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 2.915] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 2.915] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 2.915] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 2.915] (II) No input driver specified, ignoring this device.
[ 2.915] (II) This device may have been added with another device file.
[ 2.915] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event13)
[ 2.915] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 2.915] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 2.915] (**) Logitech USB Receiver: always reports core events
[ 2.915] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event13"
[ 2.915] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 2.915] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 2.915] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 2.915] (--) evdev: Logitech USB Receiver: Found relative axes
[ 2.915] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 2.915] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 2.915] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 2.915] (--) evdev: Logitech USB Receiver: Found keys
[ 2.915] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 2.915] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 2.915] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 2.915] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 2.915] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2.915] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7:1.1/input/input13/event13"
[ 2.915] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 2.915] (**) Option "xkb_rules" "evdev"
[ 2.915] (**) Option "xkb_model" "evdev"
[ 2.915] (**) Option "xkb_layout" "us"
[ 2.915] (**) Option "xkb_variant" "dvp"
[ 2.915] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 2.915] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 2.915] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 2.915] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 2.915] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 2.915] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 2.915] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2.915] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2.915] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2.915] (**) AT Translated Set 2 keyboard: always reports core events
[ 2.915] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2.915] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2.915] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2.915] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2.915] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2.915] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 2.915] (**) Option "xkb_rules" "evdev"
[ 2.915] (**) Option "xkb_model" "evdev"
[ 2.915] (**) Option "xkb_layout" "us"
[ 2.915] (**) Option "xkb_variant" "dvp"
[ 2.915] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 2.915] (II) No input driver specified, ignoring this device.
[ 2.915] (II) This device may have been added with another device file.
[ 2.917] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 7.513] (II) fglrx(0): EDID vendor "SAM", prod id 1316
[ 7.513] (II) fglrx(0): Using EDID range info for horizontal sync
[ 7.513] (II) fglrx(0): Using EDID range info for vertical refresh
[ 7.513] (II) fglrx(0): Printing DDC gathered Modelines:
[ 7.513] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 7.513] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 7.513] (II) fglrx(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 7.513] (II) fglrx(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 7.513] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.513] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.513] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 10.738] (II) fglrx(0): EDID vendor "SAM", prod id 1316
[ 10.738] (II) fglrx(0): Using hsync ranges from config file
[ 10.738] (II) fglrx(0): Using vrefresh ranges from config file
[ 10.738] (II) fglrx(0): Printing DDC gathered Modelines:
[ 10.738] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 10.738] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 10.738] (II) fglrx(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 10.738] (II) fglrx(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 10.738] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 10.738] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 10.738] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
Here's the Xorg.conf:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:6:0:0"
Option "OpenGLOverlay" "0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Setting the PCI BusID in Xorg.conf seems to have no effect, even if I set it to 6:0:0 or 7:0:0, its still the same.
Do I need to set AutoAddDevices off?MisterAnderson wrote:Does the same happen with the opensource radeon drivers? (xf86-video-ati)
Thanks for the reply!
The open source driver doesn't support my card yet. I tried installing it first since its the recommended driver, but Xorg couldn't detect any display at all.
It seems the PCI BusID is not being read from the xorg.conf file. There's auto detection everytime the PC boots.
Last edited by hdhiman (2012-10-04 00:43:52) -
My Ipod on my Iphone wont play and I have no volume bar. I can hear when the phone rings and I can hear people talking when they call, it seems to be a software promlem that I dont know how to fix. I have been having this problem and I have realized that when the error comes that this accessory is not optimised for iphone, my Ipod wont work. I have never had the air play button and my software is the current editon.
Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
TS4317 graphics cards not work
video file is not working graphics card not working is their is any software that i can update. or tell me why its not working
If you can see an image on your screen then your graphics card (Intel HD Graphics 3000) integrated into your 13" machine is working just fine.
I'm not sure what you mean when you say that a video file isn't working... how exactly isn't it 'working' and what file format is it in?
Clinton -
Do the Imac support Corel graphics software? Or does Apple make its own graphics software?
Does the Apple Imac support Corel Draw for graphics design? Or does Apple provide its own graphics software package when making an Imac purchase?
There are thousands of graphics apps available for OS X. A very quick look on Corel's web site showed Corel Draw is not available for OS X, probably another reason Corel is in sad financial shape. Apple does not include any graphics creation software when you buy an iMac what is included is OS X and the iLife suite of products.
If you are interested in a substitute for Corel Draw then I'd recommend using Google to search for OS X alternatives, I'm sure you will not have a problem finding many suitable alternatives. -
HP Pavilion dv6-3151st AMD GRAPHICS is not INSTALLING
I have HP Pavilion dv6-3151st. I have a problem. Amd graphics is not installing. I downloaded from http://support.hp.com/tr-tr/product/HP-Pavilion-dv6-Entertainment-Notebook-PC-series/4247579/model/4320740It did not install.And i downloaded from amd http://support.amd.com/en-us/downloadIt installed but games and others are using Microsoft Basic Display Adapter. Please help. I am not using my graphic card.
Hi: The only suggestion I can offer would be to try manually installing the windows 7 graphics driver from your notebook's support and driver page. If that doesn't work then there is no solution that I know of. Here is a post from another forum member with the same gpu and I tried helping him to no avail. http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/problem-with-HDMI/m-p/5162972#M302151 He did not reply back to let me know if the W7 driver worked or not.
-
Usupported graphics software photoshop cs6 extended
i hae windows 7 home premium and when i open photoshop cs6 extended it said "photoshop has detected graphics software that is not supported" and when i use the text tool the text is very small and i have done all the fixes for the small text problem and nothing has happened and i dont have acces to the 3d part???
What are your GPU and its driver?
Edit: What does Photoshop > Preferences > Performance > Graphics Processor Settings show? -
Cant burn Disc burner or software not found
I can't burn a playlist to a disk. I get the message "Disc Burner or Software not Found"
How do I rectify this? I have tried everything to get it to work but no luck
here is my test.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
TOSHIBA Satellite L655
iTunes 11.0.4.4
QuickTime not available
FairPlay 2.4.14
Apple Application Support 2.3.4
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0041BA8009958800
Current user is an administrator.
The current local date and time is 2013-08-04 17:54:04.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.4.4 (x64) is currently running.
iTunesHelper 11.0.4.4 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.Hey tfrith,
Thanks for the question. I understand you are having issues burning a playlist to disc in iTunes for Windows. The following article provides three probably solutions, I have outlined them below:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
Solution 1
Check with your manufacturer to see if there are updated software drivers for your optical drive. For more information about updating the firmware of your CD or DVD drive, see article HT3206.
Solution 2
1. Launch Windows Explorer.
2. Navigate to C:\Windows\system32\drivers\.
3. Check to see if either of the following two files are present. These files from a third-party software vendor are not supported by Windows and can cause driver conflicts with optical drives:
- afs.sys
- afs2k.sys
4. If either of the files in Step 3 are present, move them out of the system32 folder. You should keep these files stored somewhere on your hard drive, as some of your older peripherals may require them. If you need the files in the future to use a device, you may move them back into the system32 folder temporarily.
5. Reboot Windows.
Solution 3
1. Quit iTunes.
2. Manually remove the GEAR driver software using the steps found here under the section "Removing GEAR Drivers."
3. Remove any stand alone GEAR software installers from the Programs and Features control panel, if present.
4. Install the updated GEAR driver.
Thanks,
Matt M. -
Error "Disc burner or software not found"
I am having problems burning discs and below, i have a copy of my diagnostics. Yes, i am running as an admin.
This all occurred after i updated itunes.. i have not been able to burn CDs ... i keep getting "Disc burner or software not found" it irritates me because i did not have this problem before the update.. i can burn discs perfectly fine with Windows Media Player!
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Acer Aspire V5-431
iTunes 11.1.3.8
QuickTime 7.7.4
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0037B8A80B783848
Current user is not an administrator.
The current local date and time is 2013-12-01 20:35:46.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.3.8 (x64) is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: UBHelper (2.0.0.14),
UpperFilters: NTIDrvr (1.0.0.10), GEARAspiWDM (2.2.3.0),
Failed while scanning for CD / DVD drives, error 2355.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
Error Correction is turned on for importing audio CDs.
The last failed MP3 CD burn had error code 1771(0x000006eb). It happened on drive D: HL-DT-ST DVDRAM GU61N on CDR media at speed 0X.Hey xTimeGx,
Thanks for the question. The following resource references the exact error message you are receiving, and a few solutions:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
Thanks,
Matt M. -
Special Effects / Graphics software
I'm not even sure what you call it. Graphics? When it comes to titling, I feel really limited in the impact I can create with Elements 11. What supplemental graphics programs do people use??
Thanks!A.T. How would you make an arrow that points to an object in the film?
Date: Wed, 4 Dec 2013 16:55:07 -0800
From: [email protected]
To: [email protected]
Subject: Special Effects / Graphics software
Re: Special Effects / Graphics software
created by A.T. Romano in Premiere Elements - View the full discussion
garymanilow
I was browsing the Internet and ran across the following Adobe document on Premiere Elements titles. Thought of you and decided to post the link just in case you may ever need or want it.
Premiere Elements/Creating and Trimming Titles
http://help.adobe.com/en_US/premiereelements/using/WS020935FC-7A12-48f 2-8884-F8DC2D7E6985.html
ATR
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5901738#5901738
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5901738#5901738
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5901738#5901738. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
When I go to burn a CD I have it in a playlist and hit burn to disc a error message comes up and says disc burner or software not found. How do I fix this for Windows vista.
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
Gateway M-2626U
iTunes 10.2.2.14
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 003DAE0803978170
Current user is not an administrator.
The current local date and time is 2011-06-07 21:32:45.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 3200 Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.2.2.14 (x64) is currently running.
iTunesHelper 10.2.2.14 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly. -
Hello HP support, I ran a game after a long time and it was lagging, so i check and find out that it was not using dedicated graphics that is Radeon HD 8670m so i check device manager and there was only one display adapter which was the integrated graphics Intel(R) HD Graphics 4000. I then click on show hidden device and there it(Radeon HD 8670m) was, but i wasn't working it said that Currently, this hardware device is not connected to the computer. (Code 45). I then uninstall the driver in a hope that this problem will fix after reinstalling the drivers, but it does not!.... now there is no trace of the Graphics card not in the device manager not even hidden... What should i do?
Been there tried that.
I have done a full backup and restore... and the joys of Microsoft's "This software has already been registered" hops.
If the drivers are not recognising after the first run through or second... what makes you think they will after the third on a fresh install?
The DVD restore is Vista Home, I have upgraded to Business and then to Ultimate out of desperation... that will make the 6th install and seeing as the issue hasn't been resolved in any of others I just think I'll be wasting my time.
I think there must be something more fundemental not working if the driver can't find resources. -
Beats Audio Control Panel software not working after Windows 10 upgrade.
Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?
Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.
Maybe you are looking for
-
Including BPEL as part of the J2EE Spec
Can someone tell me if the BPEL stuff is going to be included in a future version of the J2EE spec? The reason I ask is because there are certain application servers on the market that no longer allow you to deploy a BPEL process, now you have to wra
-
How to avoid "unchecked cast" warnings
Hi all, here is my code: private Vector<String> vector1; private Vector<String> vector2=new Vector<String>(); vector1=(Vector<String>)vector2.clone(); ...How can i avoid "unchecked cast" warnings, while compiling with "-Xlint:unchecked" option.
-
Repointing a query to a different InfoProvider
Hi, We're using BI 7.0 and have several queries currently pointing to a DSO. The queries are fairly complex and the users have set up numerous variants for when they are run. We have since built an Infoset that we would like these queries to run agai
-
Pages does not show AirPrint option on Ipad air
I have Ipad Air. Loaded free pages app Their is no AirPrint option?? What has apple done?
-
Aperture Integration in Other Pro Apps
I would seriously consider buying FinalCut and more Pro Apps in case they would allow browsing the Aperture Library just as you do with iMovie and iPhoto Lib. The thing is once I started using Aperture, my iPhoto Lib is empty and I hate switching App