Graphical display partly covered time to time

My graphical display sometimes get partially covered with black boxes. It goes away once I close that application and reopen again.

krispiekream wrote:
can you take some screen shots and show us?
Yes that would help!
Most weird graphic problems in LV can be fixed by turning attention to the graphic interface of your machine. Reducing hardware acceleration settings or getting driver updates for your graphics adapters seem to fix most weird displays.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

IPad constantly glitching/freezing/crashing/parts of screen unresponsive - time for a factory reset OR a trip to the Apple store???

iPad constantly glitching/freezing/crashing/parts of screen unresponsive - time for a factory reset OR a trip to the Apple store???
My son has nothing but problems with his iPad Mini. It is less than a year old and it constantly freezes/crashes/glitches and parts of the screen are unresponsive. This happens while playing games, watching movies, surfing the net etc etc
The iPad has been in a heavy duty Survivor case from day 1 and has been very well taken care of - so I don't think it's a damage issue
I have tried numerous resets (just holding the 2 buttons) and have disabled every feature on the iPad that might be causing memory/RAM issues (?) all to no avail.
I haven't tried resetting to factory settings as I don't want to lose all the data on the iPad (mostly his game achievements and Minecraft maps that he has worked so hard on!!!)
SO - any suggestions:
1) Take it in to the Apple Store - I have never gone to Apple over an issue, is this possibly covered by warranty???
2) Factory Reset - If I do this can I save all his game achievements/data???
Cheers,
Todd

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPhone, iPad, iPod Touch: Troubleshooting Touchscreen Response
http://support.apple.com/kb/ts1827
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Not normal. Take it to an Apple Store for evaluation. You're covered by Apple's 1-year warranty.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Color graphics display, on PSC 2400 part #H100632782 is bad.

Color graphics display port number H100632782 is bad. This is on HP PSC 2400 photosmart series all–in-one. The display over a period of time just faded away. The chassis number is CA02124640-0001 model 5610. I have found another part number that may work in its place it is 7Rh100680782. All these suppliers that I checked,no longer have the part available. I am running this printer from a MacBookPro. The software is Mac OSX version 10.7.5. All help is greatly appreciated.
CB
This question was solved.
View Solution.

The HP Partsurfer site lists the display as Q3083-60016. This is no longer available through HP but you may be able to find a replacement with a Google search.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to display the current Date and time in xslt version 1

i am using xslt version 1 .i want to display the current date and time in the output xml using xslt(Jdeveloper) ..i just added the namespace xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:ns1="urn:oracle:integration:b2b:7D30046DC68A4FA689956D8241FA3B99">
and used thsi function <xsl:value-of select = "xp20:current-date()"/>
but it does not works for me ..help needed????
Edited by: user9519185 on Jan 20, 2009 3:04 AM

Use a formula: =NOW()
Format the cell for Date and Time, with both the Date part and the Time part displayed. Format the two parts as you wish, using the choices in the Inspector's menus.
The cell will update each time the table is recalculated.
(Description is for Numbers '09 (Mac), Numbers for iOS will be similar, but not necessarly identical in details.)
Regards,
Barry

Displaying one record at a time

Is any body able to help me? I need to display one record at a time from a Select statement.
Could I copy the results of the Select query from a table into an array for later display or is there a better alternative.
Please, any part knowledge with regard to the above would be usefull.
Regards
Eddie

What application do you want to use to display the data?
You can use "rownum" in your SQL statement to ensure that you only get record N of a query. Asktom has a good article on this sort of windowing
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:127412348064
More commonly, however, you'll write a SQL query that returns all the rows, fetch a small number, display those to the user, and then fetch more records.
Justin

Usb mouse auto disconnect time and time,Screen flash and flash when I use discrete graphic card

as title
My usb mouse auto disconnect and reconnect time and time,
no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
Mouse: Logitec G400/G1
Display:Lenovo D2081WIDE
machine:T430 2349 CTO

system info:
machine TYPE: THINKPAD T430 /2349CTO
operating system :Lenovo OEM ultimate X64 SP1
mouse type:Logitech G400 and Logitech G1
time:from 2012-10 to now
threat NO.1
USB mouse auto disconnect and reconnect time and time,no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
every time when the mouse disconnect I heard the sound which like USB DEVICE unplug,and when it reconnected I heard the sound which like USB DEVICE plug in.
threat NO.2
Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
threat NO.3
the battery auto losing capacity!!!!!!
1% everyday about 0.2Wh
since I bought to now,
the Design capacity has losing from 57.XX Wh to 47.52Wh
and full charge capacity is 48.68.
the battery info:
cycle count is 18
Bar-Code number 1ZKFD27S1RF
SerialNumber 1896
First used date 2012-09
FRU 45N1001
Firmware 0003-0080-0100-0165

How can I display one line at a time on a PPT slide

I am using OFFICE for the Mac (2008).
In the past, I have known how to do this using PPT on a Windows PC..
But something has changed and I can no longer figure out how to get each line on a PPT slide to appear one line at a time every time I click it.
It's not that difficult, but I can't figured out where they moved the "Appear" option.
I am NOT using KEYNOTE, but PowerPoint from OFFICE for the Mac (2008)
Can someone help me.
Thanks,
Tom

Since this is a Keynote discussion forum, there may be no one here that knows. I personally hate PP and could care less about how to make one line display at a time. It is easy on Keynote and that is all I need to know. You might want to look for a PP forum and ask there.

Is there a way to create a custom screensaver with pics/slides that display for different amounts of time?

Is there a way to create a custom screensaver with pics/slides that display for different amounts of time? Or even add a "video slide" into the screensaver?
My business has 3 TVs displayed in our lobby, each with its own apple TV and they are all linked to the same photo stream. Currently the Atv screensaver displays the photostream pictures of our products for the default 3 seconds. We just added pics/slides that now display messages and useful info for our customers but I want that info to be displayed for a longer period of time than the pictures to give people a chance to read it.
I tried using flickr and powerpoint as a work around but no luck. I created a slide in powerpoint with play length of 15 secs and saved it as a wmv file. I added that file to a "screensaver" set in flickr and pointed the Atv screensaver to that flickr set. It still displays everything, pics and the wmv file at the default 3 sec.
I know I can increase the duration of all pics in the screensaver to display for longer but the goal is to have the pics display at 3 secs and the info slides to display at 15 secs.

Welcome to the Apple Community.
No that's not possible.
If you have any suggestions that you think might enhance the Apple TV you can send Apple your feedback here

Write a progarm to test two parts at the same time

Hi:
I need to write a program in LabView that is capable of testing two parts at the same time.
Explanation:
I star the test on a unit, once all the electrical test is done move that unit to the pressure test without loosing the current test information and continue the test of the unit thewn generate a serial number only if it passes all the test. Then while the previous unit is going thru the pressure test star testing another unit for the elecrical test and so on.
I am using LabView 2012

From what you have described, I agree with what has been answered above. TestStand is specifically designed for. If you would like to provide more information about your application we could give you a more detailed response. For more information about TestStand follow this link
www.ni.com/teststand
Ryan
Ryan
Applications Engineer
National Instruments

I'm trying to display the current date and time on my iPad.

First, I'm not sure this is a valid post to this forum. If not, I'd appreciate knowg in where I can get help.
I have tried several ways to display the current date and time on my iPad. None work. Most things I try give me complier errors but the latest code compiles but won't display the correct time.
Here's the dispatch code in my ViewController.m file:
dispatch_queue_t queue = dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_HIGH, 0ul);
    dispatch_async(queue, ^{
        [NSTimer scheduledTimerWithTimeInterval:NSTimeInterval)1.0f target:self selector:@selector(updateLabel:) userInfo:nil repeats:YES];
Here's the updateLabel code: (which never gets executed).
- (void)updateLabel:(id) sender {
    dispatch_sync(dispatch_get_main_queue(), ^{
    NSLog(@"Datefield Update Called");
    NSDateFormatter *dateFormatter = [[NSDateFormatter alloc] init];
    [dateFormatter setDateFormat:@"EEEE, MMMM dd, yyyy 'at' HH:mm ZZZZ"];
    NSDate *dayTime = [NSDate date];
    NSString *formattedDateString = [dateFormatter stringFromDate:dayTime];
        _dateField.text = formattedDateString;
    [self.view addSubview:_dateField];
    NSLog(@"Datefield %@",_dateField.text);

Your code is needlessly complicated and has a few problems:
// These objects should be created only once.
NSTimer *dateAndTimeTimer; (You might need to make this a property with a strong reference).
NSDateFormatter *dateFormatter = [[NSDateFormatter alloc]init];
[dateFormatter setDateFormat:@"EEEE, MMMMM dd, yyyy 'at' HH:mm ZZZZ"];
// The subview should only be added once.
[self.view addSubview:_dateField];
[self performSelectorOnMainThread:@selector(startDateAndTimeTimer)
                        withObject:nil
                     waitUntilDone:YES];
-(void)startDateAndTimeTimer
    NSTimer *timer = [NSTimer scheduledTimerWithTimeInterval:1
                                                      target:self
                                                    selector:@selector(updateLabel)
                                                    userInfo:nil
                                                     repeats:YES];
    dateAndTimeTimer = timer;
    [[NSRunLoop mainRunLoop] addTimer:dateAndTimeTimer forMode:NSRunLoopCommonModes];
-(void)updateLabel
     NSDate *dateTime = [NSDate date];
     NSString *formattedDataString = [dateFormatter stringFromDate:dateTime];
     _dateField.text = formattedDateString;
     NSLog(@"_dateField.text=%@", _dateField.text);

How to display the rows number of times by giving the column values?

Hi All,
I want to display the rows number of times as the value exists in num column in the below query
with t AS
   ( SELECT 'venkatesh' NAME, 'hyd' LOC, 2 NUM FROM DUAL
     UNION ALL
     SELECT 'prasad' NAME, 'hyd' LOC, 3 NUM FROM DUAL
     UNION ALL
     SELECT 'krishna' NAME,     'hyd' LOC, 1 NUM FROM DUAL )
SELECT T.* FROM T
CONNECT BY ROWNUM <= NUM
Expected output:
         venkatesh            hyd      2
         venkatesh            hyd        2
         prasad                 hyd       3
         prasad                   hyd      3
         prasad                   hyd      3
         krishna           hyd       1Edited by: Nag Aswadhati on Nov 1, 2012 12:34 AM

Nag Aswadhati wrote:
Hi All,
I want to display the rows number of times as the value exists in num column in the below query
Expected output:
venkatesh            hyd      2
venkatesh            hyd        2
prasad                 hyd       3
prasad                   hyd      3
prasad                   hyd      3
krishna           hyd       1Using Connect By:-
with t AS
   ( SELECT 'venkatesh' NAME, 'hyd' LOC, 2 NUM FROM DUAL
     UNION ALL
     SELECT 'prasad' NAME, 'hyd' LOC, 3 NUM FROM DUAL
     UNION ALL
     select 'krishna' name,     'hyd' loc, 1 num from dual )
select t.name, t.loc
from t
connect by level <= num
         and name = prior name
         and (prior sys_guid() is not null);
NAME      LOC
krishna   hyd
prasad    hyd
prasad    hyd
prasad    hyd
venkatesh hyd
venkatesh hyd
6 rows selected

How to display All User Logged in time & Logout Time?

How to display All User Logged in time & Logout Time?
Hi..
I want to display All user who logged in the portal,
their username,
their time logged in,
their time logged out..
where can i find these information?
do Portal have already something like this?
Plz advise..Thanks.

The login information is in the wwlog_activity_log. The logout action is only logged when it is explicit. I am using the last user action time for the logout time so I can determine the duration of the visit.

Display more columns in ESS "Time Accounts" table in "Leave Request"

Hi all,
does anybody know how to configure the display of columns in the "Time Accounts" table in the ESS-WebDynpro "Leave Request" ? I currently see
Time Account / Deductible to / Entitlement / Remainder
We would like to include other columns and can't find to manage this in the WebDynpro ess~lea (we're using EP6, SAP_ESS 100 SP19) - all 12 existing columns are already set to "visible" in AccListView. In implementation of method format() in FccAccList all values are assigned, but the columns get not displayed...
Please could you advise, where and how this can be customized?
Is it to customize in backend or WebDynpro or ??
Thanks,
Monika
Edited by: Monika Verwohlt on Jul 16, 2009 11:25 AM

sorry

Unselect all the rows when display my table the first time

Hi all,
When I execute my webdynpro the first time my table is displayed with the first row selected, but this is false, this line is not selected.
If i execute the method get_selected_elements don't return anything in the table, but if i do a Click in this row then works fine.
I tried to unselect all the rows when i display the table the first time in the method WDDOINIT doing the following;
DATA lo_nd_my_table TYPE REF TO if_wd_context_node.
DATA: lt_elements TYPE wdr_context_element_set,
             lo_element TYPE REF TO if_wd_context_element,
             lo_node TYPE REF TO if_wd_context_node.
lo_nd_my_table = wd_context->get_child_node( name = wd_this->wdctx_my_table ).
lt_elements = lo_nd_my_table->get_elements( ).
LOOP AT lt_elements INTO lo_element.
    lo_element->set_selected( SPACE ).
ENDLOOP.
But, doesn't work...
How can i do it?
Thanks in advance.

hi,Husalban RM     .
You don't need to DE-SELECT each element of the context node.
You can try the following:
lo_node->set_lead_selection_index( -1 ).
"lo_node is the context node which is bound to your table.
Hope it can help you a little.
Best wishes.

Multiple records displayed on form at one time- 2 lines for each record

Hello,
I have a canvas in which I want to display 8 records at at time, so in the data block I specified 8 as the "number of records displayed" value.
However, the record has too many fields to display on 1 vertical line, so I want to split the fields into two separate lines, so there will still be 8 records but each in two lines.
How do I do that?
I'm using Forms 10g. The block is a database block using FROM CLAUSE QUERY , and the canvas is stacked.
Thanks

Sandy,
You will need to set the "Distance Between Records" property for each item in the Multi-Record Block. This will increase the space between rows so you can stack them into two rows. Unfortunately, you can't set this property at the block - so you have to set it for each displayed item.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Graphical display partly covered time to time

Similar Messages

Maybe you are looking for