Graphical Form Painter could not be called

When Im in se71 and click on the pushbutton Layout in the header form I get an error message 'Graphical Form Painter could not be called (FORMPAINTER_CREATE_WINDOW)'. What does that mean and what should have been displayed when I pushed that button?
Thanks
Peter

Thanks for that information, but it does not display a graphical tool and I get the following error message 'Graphical Form Painter could not be called (FORMPAINTER_CREATE_WINDOW)'. Can anyone explain how I can fix that?
Thanks
Peter

Similar Messages

  • SE71 Graphical Form Painter Space Deletion

    Hi there,
    When using transaction SE71 in Graphical Form Painter mode I have noticed that spaces are deleted towards the end of long sentence, especially if this sentence is over two page lines.  This becomes extreamly difficult when trying to create letters in different languages, and I was wondering if anyone encountered a similar problem, and found out how to resolve the issue?
    Thanks in advance for any help you can provide!
    Alan

    Hi there,
    Thanks for your reply.  Unfortunately this happens in all forms even when I am not using variables.  Previously saved forms (i.e. over a year old) are fine until I open them up to make an amendment and then the issue appears.  An example of the issue is:
    "Type a reply to the topic using the form below. When finished, you can optionally preview your reply by <b>clickingon</b> the "Preview" button. Otherwise, click the "Post Message" button to submit your message immediately. "
    Above you can see in bold that clicking and on has been merged together.
    It seems to be the result of a service pack upgrade, but when looking through sap notes I cannot find a similar issue.
    Thanks again though.
    Alan

  • CUPC - "Phone Error. Could not place call because you have no audio device or sound card."

    Periodically throughout the day, CUPC will not make or receive calls, but instead presents a dialog box with the message "Phone Error. Could not place call because you have no audio device or sound card."  See attachment.
    Signing out of and back into CUPC resolves the issue temporarily.
    I have version 8.6.2 installed and I'm using a USB headset.
    Does anyone know what might be causing this?

    Hi Steve,
    I have users reporting this as well with Jabra GN 2000 headsets. They claim using a different headset resolves it which I'm waiting to confirm but I was wondering if you were able to figure this out.
    Thanks
    Erik

  • Application message help could not be called Message in SABAPDOCU888

    Hi,                                                                      
    After the application of the Support Package 21 in the DEV, help is not functioning correctly, for example, in top of word WRITE (in a publisher ABAP), I pressure F1, opens help correctly, from there pressed in Output you the a list and I go until the end of the one in the point of Additional help.  In that pressed Creating Lists, returns me the Application message help could not be called (Message in. SABAPDOCU888).
    What I must make?                                                       
    Debtor for the attention                                                 
    Rogério Aranda

    I had the same problem when I installed Firefox 3, but I think the problem is due to my recent hard drive upgrade. Try changing the download location from "Desktop" in Microsoft Internet Explorer and all other browsers (Safari, Firefox, etc.) to whatever default location you prefer. I never use Internet Explorer, but I think somehow my settings were corrupted when I upgraded my hard drive. I found this solution on another site also.

  • Hi. I am a uk iPhone 5 user and will be travelling to Spain next week. Last time I went to Spain in September I could not receive calls on my phone despite having Vodafone euro traveller. I am asking what I can do to rectify this before I travel

    Hi. I am a uk iPhone 5 user and will be travelling to Spain next week. Last time I went to Spain in September I could not receive calls on my phone despite having Vodafone euro traveller. I am asking what I can do to rectify this before I travel as it was really difficult to sort out once I was abroad. Please help as I'm not the best with technology. Thanks

    Hi,
    Is your phone locked to a carrier? If so, you will need to contact the carrier to find out what international SIM cards (if any) you can use when travelling.
    Cheers,
    GB

  • Intel High Definition (HD) Graphics Driver (SP69589) could not be Installed in HP Notebook 15-r033tx

    Hi,
    I have purchased HP Notebook 15-r033tx.
    I have formatted my PC recently 
    I am currently using Windows 7 Ultimate -64 bit OS.
    I could not Install the following drivers:
    1. Intel Chipset Installation Utility and Driver (sp69575)
    2. Intel Management Engine Interface (MEI) Driver (sp65359).
    3. Intel Sideband Fabric Device Driver (sp65474)
    4. Intel High Definition (HD) Graphics Driver (sp69589)
    5. Nvidia High Definition (HD) Graphics Driver (sp69609)
    6. Realtek Card Reader Driver (sp69610)
    7. Intel Rapid Storage Technology Driver (sp69595)
    8. TSST Optical Drive Firmware Update (SU208FB HH02)
    9. HP 3005pr USB 3.0 Port Replicator Driver (sp67008) which shows "Your primery Graphics Card (Standard VGA Graphics Adapter) is not supported by DisplayLink software. It may not possible to use DisplayLink technology on this PC unless the graphics card is changed to a supported model."
    Every time it shows with the Program Compatibility Assistant "This Program might not installed Correctly."
    Moreover when I go to SWsetup & Click on setup application it shows:
    This computer does not meet minimum requirements for installing the software." (under a dialouge box)
    Why this kind of problem occured and please suggest what is the possible way-out to overcome this problem???
    If any link is there in this regards please suggest the same as well.
    Note: This is a kind request to you that I am not a s/w professional if you please suggest step by step (one after another) driver installation it will much better for me to understand easily.
    Thank You,
    SRIDIP KUMAR SHAW

    Hi @sridipkumar ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP 15-r033tx Notebook  and trying to update drivers for Windows 7.
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system for Windows 7.
    When you look in the Device manager uninstall anything that has a yellow ? or yield sign on it and select the box for uninstall the driver. Once you have removed all restart the Notebook.
    What in the device manager has the yellow mark on it upon restart?
    Please let me know.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • I try to fill billing information but i could not (please call itunes support to complete this transction) what shoul i do

    i try to fill billing information but i could not as there is a message (please call itunes support to complete trans action

    If you have inaccurately filled out your billing application (or your credit card was declined), this can cause a red flag to popup that states "Please call iTunes suport to complete transaction". If you receive this error, iTunes support can be called by visiting https://expresslane.apple.com/ and completing the prompts within to speak with a customer service representative.
    They will either be able to help you via IM support or submit a ticket to contact your landline or cellular.

  • Web service handler could not registered/called in client web service

    Hi Expert,
    I have two web service ServiceA & ServiceB and both implemented in weblogic.
    The ServiceA is SSL enable and protocol is https which is not published by me.
    The ServieB is my web service(wls8.1) and act as client for ServiceA.
    My problem is when i hit my service, its not able set the handler when it call ServiceA but it is invoking the service and giving application exception like authentication error.
    My service file:
    import java.util.ArrayList;
    import java.util.HashMap;
    import java.util.Iterator;
    import java.util.List;
    import java.util.Map;
    import javax.xml.namespace.QName;
    import javax.xml.rpc.handler.HandlerInfo;
    import javax.xml.rpc.handler.HandlerRegistry;
    import javax.xml.rpc.handler.soap.SOAPMessageContext;
    import weblogic.webservice.client.SSLAdapterFactory;
    import weblogic.webservice.client.WLSSLAdapter;
    public class HelloService {
    String wsdl = "https://188.122.123.23/RemoetService?WSDL";
    static     {
              SSLAdapterFactory factory =                SSLAdapterFactory.getDefaultFactory();
              WLSSLAdapter adapter = (WLSSLAdapter)     factory.getSSLAdapter();
              adapter.setTrustedCertificatesFile("D:\\lib\\certs\\cacerts");
              factory.setDefaultAdapter(adapter);
              System.setProperty("weblogic.xml.encryption.verbose","true");
              System.setProperty("weblogic.xml.signature.verbose","true");
              System.setProperty("weblogic.webservice.verbose","true");
         public String sayHello(String user) {
              RemoteService_Impl service = new RemoteService_Impl(wsdl);
              RemotePortType port = service.getRemoteServicePort1();
              String namespace = service.getServiceName()
                        .getNamespaceURI();
              QName portName = new QName(namespace,
                        "RemoteServicePortType");
              HandlerRegistry reg = service.getHandlerRegistry();
              List handlerList = new ArrayList();
              Map map = new HashMap();
              map.put("Username", "user1");
              map.put("Password", "pwd1");
              HandlerInfo info = new HandlerInfo();
              info.setHandlerClass(WSClientHandler .class);
              info.setHandlerConfig(map);
              handlerList.add(info);
              reg.setHandlerChain(portName,(List)handlerList);
              RemoteServiceResponse = port.callMe(name);
    My Handler Class:
    package com.test;
    import java.util.Map;
    import javax.xml.namespace.QName;
    import javax.xml.rpc.handler.Handler;
    import javax.xml.rpc.handler.HandlerInfo;
    import javax.xml.rpc.handler.MessageContext;
    import javax.xml.rpc.handler.soap.SOAPMessageContext;
    import javax.xml.soap.Name;
    import javax.xml.soap.SOAPElement;
    import javax.xml.soap.SOAPEnvelope;
    import javax.xml.soap.SOAPException;
    import javax.xml.soap.SOAPHeader;
    import javax.xml.soap.SOAPHeaderElement;
    public class WSClientHandler implements Handler {
         private HandlerInfo handlerInfo;
         public WSClientAuthenticateHandler(){}
         public void init(HandlerInfo hi) {   
              System.out.println("Handler init");
              handlerInfo = hi;
         public void destroy() {
              System.out.println("Handler destroy method called");
              handlerInfo = null;
         public QName[] getHeaders() {
              System.out.println("Handler Header method called");
              try     {
                   Map map = handlerInfo.getHandlerConfig();
                   QName[] headers = handlerInfo.getHeaders();
                   System.out.println(" Config :"+map);
                   for(int i=0;i<headers.length;i++)     {
                        System.out.println(headers.getLocalPart()+" "+
                        headers[i].toString()+" "+headers[i].getNamespaceURI());
              }catch(Exception e)     {
                   e.printStackTrace();
              return handlerInfo.getHeaders();
         public boolean handleRequest(MessageContext mc) {   
              SOAPMessageContext smc = (SOAPMessageContext) mc;
              System.out.println("Calling handler class.....................");
              try     {
              SOAPEnvelope se =      smc.getMessage().getSOAPPart().getEnvelope();
              System.out.println("Calling handler class.....................");
         SOAPHeader soapHeader = se.getHeader();
         Name headerName = se.createName("Security","wsse","http://schemas.xmlsoap.org/ws/2002/07/secext");
         SOAPHeaderElement headerElement = soapHeader.addHeaderElement(headerName);
         SOAPElement element = headerElement.addChildElement(se.createName("UsernameToken", "wsse", "http://schemas.xmlsoap.org/ws/2002/07/secext"));
         element.addChildElement(se.createName("Username", "wsse","http://schemas.xmlsoap.org/ws/2002/07/secext")).addTextNode("testuser");
         element.addChildElement(se.createName("Password", "wsse","http://schemas.xmlsoap.org/ws/2002/07/secext")).addTextNode("testpwd");
         System.out.println("Calling handler class.....................");
                   System.out.println("** Request: \n "+se.toString()+"\n");
              }catch(SOAPException e)     {
                   e.printStackTrace();
              return true;
         /** * Specifies that the SOAP response message be logged to a
         * log file before the
         * * message is sent back to the client application
         * that invoked the Web service.
         public boolean handleResponse(MessageContext mc) {  
              System.out.println("Handler Response method called");
              SOAPMessageContext messageContext = (SOAPMessageContext) mc;
              System.out.println("** Response: \n"+messageContext.getMessage().toString()+"\n");
              return true;
         /** * Specifies that a message be logged to the log file if a SOAP fault is
         * * thrown by the Handler instance.
         public boolean handleFault(MessageContext mc) {   
              SOAPMessageContext messageContext = (SOAPMessageContext) mc;
              System.out.println("** Fault: \n"+messageContext.getMessage().toString()+"\n");
              return true;
    Please need help here.
    Thanks in Advance,
    pps

    I have tested static client calling using handler simple above service and found the issues.
    QName portName = new QName(namespace,
    *"RemoteServicePortType");*
    The above line code has created the issues,becuase in wsdl file ( given similar wsdl file).
    <?xml version="1.0"; encoding="UTF-8"?>
    <definitions name="HelloService"
    targetNamespace="http://www.ecerami.com/wsdl/HelloService.wsdl"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:tns="http://www.ecerami.com/wsdl/HelloService.wsdl"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <message name="SayHelloRequest">
    <part name="firstName" type="xsd:string"/>
    </message>
    <message name="SayHelloResponse">
    <part name="greeting" type="xsd:string"/>
    </message>
    <portType name="*RemoteServicePortType*">
    <operation name="sayHello">
    <input message="tns:SayHelloRequest"/>
    <output message="tns:SayHelloResponse"/>
    </operation>
    </portType>
    <binding name="Hello_Binding" type="tns:*RemoteServicePortType*">
    <soap:binding style="rpc"
    transport="http://schemas.xmlsoap.org/soap/http"/>
    <operation name="sayHello">
    <soap:operation soapAction="sayHello"/>
    <input>
    <soap:body
    encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
    namespace="urn:examples:helloservice"
    use="encoded"/>
    </input>
    <output>
    <soap:body
    encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
    namespace="urn:examples:helloservice"
    use="encoded"/>
    </output>
    </operation>
    </binding>
    <service name="Hello_Service">
    +<port binding="tns:Hello_Binding" name="*RemoteServicePortType1*">+
    +<soap:address+
    location="http://host1:8080/soap/servlet/rpcrouter"/>
    +</port>+
    +<port binding="tns:Hello_Binding" name="*RemoteServicePortType2*">+
    +<soap:address+
    location="http://host2:8080/soap/servlet/rpcrouter"/>
    +</port>+
    +<port binding="tns:Hello_Binding" name="*RemoteServicePortType3*">+
    +<soap:address+
    location="http://host3:8080/soap/servlet/rpcrouter"/>
    +</port>+
    +<port binding="tns:Hello_Binding" name="*RemoteServicePortType4*">+
    +<soap:address+
    location="http://host4:8080/soap/servlet/rpcrouter"/>
    +</port>+
    </service>
    </definitions>
    From the above WSDL, I have four port name (port binding="tns:Hello_Binding" name="*RemoteServicePortType1*) which is not matching with PortType (portType name="*RemoteServicePortType*")
    even i have iterated from getPorts() method and used to invoke the service.But handler was not calling when i invoke.
    Please guide me here how i specify correct portname which can call Handler class also.
    Thanks in advance,
    pps

  • Forms 9iDs could not run sample form

    I downloaded the windows version of 9IDs release 2 and tried to run a sample form. The applet get initialized. the login window pops up. once the user and database information is passed the applet tries to connect but this message pops up finally:
    "FRM-92100:Your connection to the server was interrupted.
    This may be the result of a network error, or a failure on the server
    you will need to reestablish your session.
    Details...
    Java Exception
    java.io.EOFException
    at java io.DataInputStream.readUnsignedByte(Unknown Source)
    at Oracle.forms.engine.Message.readDetails(Unknown Source)
    at oracle.forms.engine.message.readDetails(Unknown Source)
    at oracle.forms./net.StreamMessageReader.run(Unknown Source)
    Please assist. Note that I have set the NetworkRetries Parameter to 30.
    thanx in advance.

    Getahun,
    are you trying to run the demos on Oracle9iAS ? I thought the readme is saying that you can only run this from Oracle9iDS. Please make sure that you run this in 9iDS and not 9iAS.
    Frank

  • Graphical Form?

    Hello,
            I have the data in my table where some of the fields are like sales of company and area of sales etc. requirement is like my client want to display the data in grapghical form. please can any one help me to achieve this.
    I know how to display the data in the graphical format when the data is present with in the program like dclareing of my own structure giving the values and appending...
    DATA: BEGIN OF DATA OCCURS 1,
    TEXT(25),
    VALUE TYPE P,
    END OF DATA.
    DATA: TCOL1(5) VALUE '#1993'.
    DATA: TITLE(25) VALUE 'Merchandise 1993'.
    DATA: TIT2(10) VALUE 'Product'.
    DATA: MOD_ROW(5), MOD_COL(5), MOD_VAL(20).
    DATA: M_TYP, B_TYP, BUSG_STAT.
    FIELD-SYMBOLS: <F>.
    DATA-TEXT = 'Refrigerators'.
    DATA-VALUE = 12345.
    APPEND DATA.
    DATA-TEXT = 'Freezers'.
    DATA-VALUE = 22222.
    APPEND DATA.
    DATA-TEXT = 'Ovens'.
    DATA-VALUE = 11111.
    APPEND DATA.
    DATA-TEXT = 'Dishwashers'.
    DATA-VALUE = 54321.
    APPEND DATA.
    PERFORM OUTPUT_2D.
    AT PF08.
    BUSG_STAT = SPACE. "// start and wait
    Event-Loop
    DO.
    CALL FUNCTION 'GRAPH_2D'
    EXPORTING
    STAT = BUSG_STAT
    INFORM = '7' "// allow modify
    MAIL_ALLOW = 'X' "// allow mail
    IMPORTING
    M_TYP = M_TYP
    B_TYP = B_TYP
    MOD_ROW = MOD_ROW
    MOD_COL = MOD_COL
    MOD_VAL = MOD_VAL
    TABLES
    DATA = DATA.
    BUSG_STAT = '4'. "// Just wait next time
    CASE M_TYP.
    WHEN 'D'. "// Programm ended
    EXIT.
    WHEN 'I'. "// Valid message
    IF B_TYP = 'M'. "// Modify-event
    READ TABLE DATA INDEX MOD_ROW.
    ASSIGN COMPONENT MOD_COL OF STRUCTURE DATA TO <F>.
    <F> = MOD_VAL.
    MODIFY DATA INDEX MOD_ROW.
    ENDIF.
    IF B_TYP = 'S'. "// Select-event (ignored)
    ENDIF. "// For element (MOD_ROW-MOD_COL)
    ENDCASE.
    ENDDO.
    PERFORM OUTPUT_2D.
    FORM OUTPUT_2D (Show the actual data)
    FORM OUTPUT_2D.
    WRITE: / 'Products',22 TCOL1.
    SKIP 2.
    LOOP AT DATA.
    WRITE: / DATA-TEXT, 22 DATA-VALUE.
    ENDLOOP.
    ENDFORM.
    But my data is present in Table in this case how to represent the data tht is present in the table..
    Thks

    Thanks for that information, but it does not display a graphical tool and I get the following error message 'Graphical Form Painter could not be called (FORMPAINTER_CREATE_WINDOW)'. Can anyone explain how I can fix that?
    Thanks
    Peter

  • Was watching a movie with AirPlay mirroring on apple tv from iMac. Got a Skype call. Turned off AirPlay on atv and on iMac. Could not hear my Skype caller until I unplugged the atv. What else could I have done?

    Was watching a movie with AirPlay mirroring on atv from iMac.   Got a Skype call. Could not hear caller until I unplugged atv. Turned off AirPlay on both atv and iMac. Could not hear Skype caller until I turned off atv. What else could I have done?

    I checked and found that the router did not have the latest firmware.   It does now.   The issue is still there.   I did a little research and found that the model number of my Apple TV (MC572LL/A) shows that it is a 2G version which uses the A4 chip.   The latest version uses the A5 chip and is 1080 capable.  Both are supposed to be capable of using type "N" routers.   I don't think that should be an issue but I wonder if later updates may have introduced some issues in the 2G version.  
    I am going to try changing the "N" channel also- just to see if that makes any difference.  The istumbler app does not show any "N" networks in my area so it is defaulting to 149.   I will note that even 1 foot away from the router I only get 75-85% for signal.   I would expect it to be 100% since it is so close.   I am also seeing noise go up from typically 13% to 21% when it is on channel 3 and that close.       I will play change locations and channels and see if there is any improvement.   

  • ReturnEvent not get called after search more than 10 times in LOV page

    hi there,
    I using ADF and Jdeveloper 10.3.1.2
    In my project I have a form which called a LOV page for selecting multiple records and submit button sumup the values of each selected row of LOV and return to the main form and display added value on text field.
    problem is when I search records more than 10 times or more I put search criteria and select row on each time. After click on submit the value of each row is sum up return on the main form but it not reflected on main form because ReturnListener not get called .
    But when I select many rows more than 10 without searching then the ReturnListener get called when it returning on main form.
    So should I do so that ReturnListener get called.
    Is it any bug of ADF or Jedeveloper .

    Hi,
    depends on whether you control the BPM task flow or not. If you do, have a look at this thread for how to debug the problem
    How to debug "Attempt to validate an already invalid RegionSite"?
    Otherwise, post it to the SOA forum if this is initiated by their generated code. The most common reason though is that the task flow lacks a default activity. So if the default activity is somewhat calculated dynamically in your application then this may be a reason
    Frank

  • Help!! graphical screen  painter can't use.

    hi,everyone.
    we conncet to sap with sapgui by saprouter.
    the graphical screen painter not available .
    how to deal with this problem?

    Check the RFC - EU_SCRP_WN32 destination in SM59.
    Perform a "Test Connection": if the connection doesn't work maybe there is an issue in the connection between the presentation server and the application server.
    Check if there is a firewall that blocks the port used by the RFC.
    I have the same problem if I use a VPN connection to logon. The graphical screen-painter does not work...
    Hope this helps,
    Roby.
    PS: check out if in <sapgui_directory>\FrontEnd\SapGui there are these executables:
    gnetx.exe and gneux.exe
    These are the necessary files to start the Screen-Painter.

  • Could not start Layout Designer (see long text)

    Dear All,
    Could not start Layout Designer (see long text)
    Message no. FPUIFB086
    Diagnosis
    The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
    Procedure
    Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).
    Refer also to SAP Note 1121176.
    Note : I have already checked forums and also the long text file , i have installed SAP gui 720 with latest patch  even though , we are getting the same error . or i have to installed ADOBE LIFE CYCLE DESIGNER to user PC ?
    Note :
    One of the forum is mentioned ,we can also download and install the newest SAP GUI (what is 7.2 i believe) which has LCD as a part of installation.
    but still i am getting error .
    SAP gui Details :
    SAP PC VERSION INFORMATION: saplogon.exe
    MAIN MODULE INFORMATION:
       saplogon.exe
       SAP Logon for Windows
       720 Final Release
       7200.3.9.1071
       1286983
    SYSTEM INFORMATION:
       Operating system: Microsoft Windows XP 5.1 (2600)
                         Service Pack 3
    Kindly advise.

    Please let me know the path and it  can be used permanent ?  or it will ne expired ?
    Thanks
    Edited by: satheesh0812 on Nov 29, 2011 12:17 PM

  • Graphical Screen Painter

    Hi Experts,
    I need to design screen. when i use Layout in Se51 tcode system gives "Graphical Screen Painter is not avaliable. Continue with Alphanumeric Editor?" What is the problem? How to resolve it?
    I already check the Graphical Screen Editor checkbox under SETTINGS also. still the same message is coming..
    pls guide
    Thanks

    HI,
    Its a problem with the GUI installation... You uninstall and again reinstall... Even then if you face the problem then uninstall and if any new version available go with it or if you have only one version then Goto REGEDIT and delete the DLL's and Configurations logs and install again freshly..
    Be careful while deleting DLL's in REGEDIT..
    IF you know you do it or else dont TOUCH THAT.
    Better than the best go for the new version if you are using old which would definitely help you.
    *If you are working in Client System then cross check with Basis Team..
    Or
    Check the patch level of your GUI and download a new patch and install it.. This will also solve your issue..*
    Hope this would solve your problem
    Regards
    Narin Nandivada

Maybe you are looking for