Graphical glitch during the login process on Lion

Hi there,
After entering my password at the login screen, it fades to blue for about two seconds, then shows the login screen again for a brief second before transitioning to my desktop. I thought this was normal until seeing how Lion launches on other computers.
Any thoughts on what this could be or what I can do?
I upgraded to Lion from Snow Leopard on a 15" MacBook Pro (Late 2010)
Thanks!

Step 1: Open SQL Server Configuration Manager
Go to Windows 8 Start screen.
Start typing in SQLServerManager11.msc if you are looking for SQL Server 2012 configuration manager. Type in SQLServerManager10.msc if you are looking for SQL Server 2008 configuration manager.
In the result panel you can see the SQLServerConfiguration Manager.
Click the icon to launch the SQL Server Configuration manager.
The configuration manager will open in MMC.
Step 2: Enable following configuration settings
ensure Shared Memory protocol is enabled
ensure Named Pipes protocol is enabled
ensure TCP/IP is enabled, and s ahead of the Named Pipes in the settings
http://dotnetguts.blogspot.com/2014/05/a-connection-was-successfully.html?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+DotnetGuts+%28Asp.net%2C+C%23%2C+.Net+Framework%2C+SQL+Server+Information%29
Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/

Similar Messages

Error occurred during the login process

Error: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient
Data Provider)

Step 1: Open SQL Server Configuration Manager
Go to Windows 8 Start screen.
Start typing in SQLServerManager11.msc if you are looking for SQL Server 2012 configuration manager. Type in SQLServerManager10.msc if you are looking for SQL Server 2008 configuration manager.
In the result panel you can see the SQLServerConfiguration Manager.
Click the icon to launch the SQL Server Configuration manager.
The configuration manager will open in MMC.
Step 2: Enable following configuration settings
ensure Shared Memory protocol is enabled
ensure Named Pipes protocol is enabled
ensure TCP/IP is enabled, and s ahead of the Named Pipes in the settings
http://dotnetguts.blogspot.com/2014/05/a-connection-was-successfully.html?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+DotnetGuts+%28Asp.net%2C+C%23%2C+.Net+Framework%2C+SQL+Server+Information%29
Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/

Can't initialize OCI error occured during the login process using TOAD 9.0

I have installed the Toad 9.0 recently while login using the username & password for oracle 10.0 database , i am getting the error
Can't initialize OCI Error 1
But i am able to login using the Sql Plus successfully..
Thanks in Advance.

Here's one more reason why this error occurs in Toad. It is when you have more than one Oracle Client installed on your machine. Even when you select the correct Oracle Home in "Connect Using" field of Toad, you still get this error "Can't initialize OCI. Error -1". So, to solve that you need to go to the installation folder of that Oracle Home (e.g. C:\Oracle\ora92\), then go to the BIN folder. Open Oracle.Key in Notepad and confirm that it is showing Registry entry/path to the correct Oracle Home (e.g. HOME0 or HOME1 or whatever).
I hope this helps.

Coding the login process

We want the user to click something (button, link, etc.) from a point behind some other authentication source and have them automatically logged into Plumtree with a particular account credentials. We feel that since they are authenticating already there is no reason to have them authenticate again.
I've tried for days to play with the loggin and redirect PEIs and I'm not having much luck. Also, I'm really not sure if that suits our needs. Someone had mentioned I might try using HTTP POST query Request to the server, but I'm not too sure how to make that happen.
If anyone has any code samples for this or anything else they think would be helpful to get this job done, please let me know.
Thanks.
Dave

Anupam,
This is probably the best answer i have received in this forum. If this forum had a rating for answers, you get a 5 out of 5 for this answer or maybe a 10 out of 5 :).
Just for the record and for future reference to some poor user who is stuck with the same problem as i was.....
i noticed that
if the application entity does not have access to modify the authenticated_users group we got this error
Error: Unexpected error encountered in wwsec_app_priv.process_signon (User-Defined Exception) (WWC-41417)
An Exception was raised when accessing the oracle Internet Directory: 50: Insufficient access Details
Error:Operation: dbms_ldap.modify_s
Entry DN:
Cn=AUTHENTICATED_USERS,cn=portal30.dpor.dill.latticesemi.com,cn=groups,dc=latticesemi,dc=com
Changes
Uniquemember: Add: cn=portal30_admin,cn=users,dc=latticesemi,dc=com. (WWC-41743)
if any of you are wondering why i ended up with this situation..we just ran upgrade scripts to upgrade our repository from 30985 to 9026. And right after the upgrade when we try to login , we got the above message.
If i add the newly created (during the upgrade process) application entity to OracleDASEditGroup, the above error goes away. OracleDASEditGroup has the privilege to edit any group, although it needs access to authenticated_users just to login
Harish

My computer freezes up when trying to upload photo book from iPhoto '11. This happens during the upload process.

My computer freezes up when trying to upload photo book from iPhoto '11. This happens during the upload process.
When this happens I need to close down the computer and restart.
Any ideas ?
I've got Mountain Lion running.
I'm on a 13" white MacBook with 8GB RAM installed.
I recently had a 1 TB hard disc installed at the Apple store.

can you preview it? -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
If that works fine and you still have problems boot into safe mode and try again
LN

Understanding the login process

My question is concerning 9ias V2 and portal repository 9.0.2.6
I noticed that when a user tries to login to the portal for the first time, if credentials are correctly entered , the user is added to the authenticated_users group.
Which admin user adds the first time user to authenticated users group ,
is it portal30? portal30_sso?
And how is the the access to this admin user granted in OID?
Any pointers will be appreciated.
Harish

Anupam,
This is probably the best answer i have received in this forum. If this forum had a rating for answers, you get a 5 out of 5 for this answer or maybe a 10 out of 5 :).
Just for the record and for future reference to some poor user who is stuck with the same problem as i was.....
i noticed that
if the application entity does not have access to modify the authenticated_users group we got this error
Error: Unexpected error encountered in wwsec_app_priv.process_signon (User-Defined Exception) (WWC-41417)
An Exception was raised when accessing the oracle Internet Directory: 50: Insufficient access Details
Error:Operation: dbms_ldap.modify_s
Entry DN:
Cn=AUTHENTICATED_USERS,cn=portal30.dpor.dill.latticesemi.com,cn=groups,dc=latticesemi,dc=com
Changes
Uniquemember: Add: cn=portal30_admin,cn=users,dc=latticesemi,dc=com. (WWC-41743)
if any of you are wondering why i ended up with this situation..we just ran upgrade scripts to upgrade our repository from 30985 to 9026. And right after the upgrade when we try to login , we got the above message.
If i add the newly created (during the upgrade process) application entity to OracleDASEditGroup, the above error goes away. OracleDASEditGroup has the privilege to edit any group, although it needs access to authenticated_users just to login
Harish

Problem: An error occured during the uploading process.

Hello! I've searched around but I am having difficulty finding a solution to this problem.
I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab. This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process. Please try again later." However, it eventually started working. It is now a few weeks later, and I am having the very same issue. I am unable to upload to YouTube or any other service through the Share tab. Even loading the software itself, the opening splash screen is unable to grab my Adobe ID. It never stops "Gathering User Info..."
Steps I have tried:
Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
Checked router settings.
Enabled DMZ on router and linked it to this specific computer.
Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software. This has continued to baffle me though, and finding help is difficult. Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video. The YouTube HD setting has been great for me in the past, as files are small but still look great online. I would really like to get it working again, both for ease and convenience for simple projects.
If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice. In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
I don't believe it matters in this situation, but just in case:
Windows 7
AMD Phenom II X4 820 - 2.80 GHz
6 GB RAM
Radeon HD 5880 1GB
Connecting through a Netgear WNDR3400 router, standard DSL connection.

Sorry, not seeing where to edit my original post.
Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser. So I am not being blocked somehow to those particular sites. It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
Additionally, the only virus software running is Microsoft Security Essentials. It has never raised a flag before with this software or caused interference in the past. I do not use Norton or any other service which are known to interfere with programs often.
Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine. As you can see in this image though, it cannot seem to ever connect and grab my user information.
http://i.imgur.com/S53xN.png

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

Nah - that's just the normal boot process.
Clinton

How do I solve this Nano 3G syncing problem? During the syncing process my music files are registering as audio, but once I eject the IPOD it does not reveal the music files in the music folder.

During the syncing process my IPOD Nano 3G shows that the music files that I'm synching are registering as audio, and that the video files are registering as video, and even upon completion they are still labeled as such. But, when I eject the device from ITUNES and turn it on, the IPOD reveals that there are no music or video files to be played. When I plug the device back into my MAC and, when ITUNES recognizes the device, uder the summary tab the summary bar reads that the files that I loaded are all classified as other files. What could be causing this? I had to re-install my Tiger Software, and since then I've been having this problem.

was this ever addressed

Batch Traceability for Sugar as raw material during the production process

Dear Colleague ,
I need your support for a traceability issue in a customer on beverage sector
See the case below:
Batch Traceability for Sugar as raw material during the production process
In AMSB the batch traceability in some production processes is very difficult, especially in case of sugar where tanks wherein more than one batches of the same material can be mixed. For example, in a single day almost 17-20 batches of the same material can be mixed and as the result is a composition of water and sugar the normal FIFO rule strategy cannot be applied during the component consumption.
The raw material (sugar) is received in tank S5 at different points of time, and its content is transferred to tank B1 for storage purposes as well as for mix the sugar with other material such as water.
At a specific moment the S5 tank contains only a single batch, while the tank B1 contains more than one batch. Tank B1 is used in order to supply the production line and the corresponding material consumption is triggered in backflush as soon as the production activity is declared (production confirmation). Along with the material consumption the batch determination takes place and a complex algorithm is applied: at a very high level, the single batch is consumed depending on its percentage inside the mix of composition and in case the this
percentage is under a threshold level the current batch should be full used in order to avoid that it will exist for ever.
Moreover, the good movement reversal (reversal of material consumption) and its correction lead to a complete new calculation of all the batches consumed after the original movement date/time. This means that the algorithm for batch determination should be reapplied for all the consumptions subsequent to the original movement.
On the other hand it’s not possible to identify the mix of batches at the exit point of silos B1 because the total consumption of the material in the tank will never happen. As long as the tank level decreases it will be filled up from the tank used for receiving of sugar (S5).
As requirement AMSB needs to post the material consumption starting from EWM, this means that EWM should be the master system in this case and the correspondingmovements have to be transferred to ECC afterwards. This mainly because EWM should guarantee the business continuity in case the ERP system is not available.
AMSB asked if the scenario depicted has been implemented in some customer, in EWM system or in any other SAP solution.

Hi ,
At the time of consumption you can put ' * ' aestrix sign in the batch field.
You will get list of batches of that material.select ur batch and consume the quantity.
Regards
Piyush

What is the keyboard shortcut to lighten images during the editing process?

What is the keyboard shortcut to lighten images during the editing process?

I have no idea what you mean. You need to explain better.
Mylenium

HT201413 I keep error 9 when i try to restore my Ipod 5.It seems to be that my device disconnects during the restore process, then error messege pops up. I have updated the security settings on my pc and it still doesn't work.

Error 9 pops up when trying to restore Ipod 5. The problem seems to be that my ipod disconnects during the restore process. My ipod is stuck in restore mode so I can't access its update serever. I have already updated my pc and its security settings. Is there anything else i can try?

Hello AS234,
This error is typically indicative of a conflict with installed security software.
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Cheers,
Allen

How does the login process works with a bind to AD?

Hi there,
I am trying to bind our mac to our Active Directory. Before doing I'd like to understand well how the login process works. Is there any reference I could look up to?
For what I've understood until now with an example user "testAccount" and no automount and no AD extension and the ADplugin set as:
a) if mobile is set, then a /Users/testAccount is created and if UNC is set then a smbHome is mounted "on desktop". If UNC is not set, do nothing more
b) if force is set, then a /Users/testAccount is created and if UNC is set then a smbHome is mounted "on desktop". If UNC is not set, do nothing more
c) if force is NOT set:
--c1) if UNC is not set and cannot map NFSHomedirectory at all, then login the user with such a temporary home
--c2) if UNC is set mount SMBhome and use it as mounted home folder (NFSHomeDirectory-->SMBhome "/Network/Servers/my.server.com/users/testAccount")
--c3) if UNC is not set then retrieve the homeDirectory-NIS's attribute in AD (NFSHomeDirectory--> "/homes/testAccount") and create /homes/testAccount
my doubt now is point c2) after I login in with a "#mount" I get:
trigger on /Network/Servers/my.server.com/users (autofs, automounted)
//[email protected]/users on /Network/Servers/my.server.com/users (smbfs, nodev, nosuid, automounted, mounted by testaccount)
but my SMBhome is not correctly mounted on remote server (but the Library folder and MCX files are created!) and I get home errors because the system is looking for "/homes/testAccount", which I don't know where it is coming out from given that a
#dscl /Active\ Directory/my.server.com -read /Users/testaccount |grep homes gives only out dsAttrTypeNative:unixHomeDirectory: /homes/testAccount
thanks,
a.

Is there any reference I could look up to?
http://www.macwindows.com

Application error occurred during the request procession.

Hi all
i am geeting this error when i am ruuning my JSP page through NWDS.
Application error occurred during the request procession.
Details: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException:
Error compiling [/InvokeProxy.jsp] of alias [ProxySenderWeb] of J2EE application [sap.com/Refrence].
Exception id: [001279D06B4E00C6000027C700002DFC000445047AAE5AD8]
Thanks in advance

Dear Kunnal,
Please share your solution with the community.
Thank you.

Graphical glitch during the login process on Lion

Similar Messages

Maybe you are looking for