Graphical modeler error while using the back and forward buttons on the CRM
Dear Gurus,
Have issue with segmentation graphical builder in CRM 7.0. The issue is When you are in graphical modeler and try to go back and come forward again using CRM back and forward buttons the graphical modeler is giving error. I am using the following steps.
1) Log on to marketing professional role
2) go to create new segmentation
3) enter the profile name and save
4) click on graphical modeler
5) Able to see the graphical modeler
6) Click on back button on the top right hand corner (CRM back button)
7) system takes me to profile creation
8) click on forward button on the top right hand corner (CRM forward button)
9) unable to see the graphical modeler - giving error
Please guide me how to fix this issue.
Regards,
Niranjan
Hi,
Please apply the manual steps given in SAP note 1614524 and retest the issue.
Also make sure your JRE version is 1.6_19 or higher.
Hope this helps.
Regards,
Anup
Similar Messages
-
O?S is Vista Ultimate 32 bit fully updated. I have just installed Firefox 4.01. I have lost use of back and forward buttons - they are greyed out. Is there a solution please?
It is possible to have earlier data in a tab if the latest tab had target="_top" that means the back key will not work, but if your right-click on the back/forward you see a context menu. As far as I know the only difference between 3.6 and 4.0 ws that the drop-down arrow was dropped but like before you can still right-click.
There are some extensions that mess with the Back/Forward buttons.
There is a difference between gray and '''black''' on the buttons, '''black''' means there is history in that direction.
You can make Firefox 4.0.1 and Firefox 5.0 look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)] -
Error while using the export utility
Dear all of
I am getting the following error while using the export utility in the Oracle database 9i
I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
FOLLOWING ARE THE ERROR ----------------------------
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
-----------------------------------------------------------------------------------------------------------------------------------Can you go to this discussion please.
Re: Getting a strange error for Exp
-aijaz -
Dear GRC experts,
After upgrading GRC 10 to SP14, assigning manual passwords during the approval of a request, the approval process is failing.
Here is the scenario; your advice will be appreciated.
Task: Manually assign passwords to multiple systems contained in the request
Where: On the access request, go to “User System Details” tab
Issue: After approving/submitting the request, the error “Database error while using the secure store” is generated
Logs: Nothing on transactions SLG1 or ST22; however ST11 shows the error attached below:
This is the failed approval of the request:
Other scenarios executed as a workaround, and passed the password assignment this time:
The approval will work if only one password is assigned to any of the given systems. The rest of the systems get an auto-generated
password.
ARM also accepts multiple passwords when the requestor assigns passwords on the “User System Details” prior submitting a
request. The GRC admin can approve once reached for system approval.
AS FYI, “Confirm Password” is only required when creating the request but not on any other stage.
System information:
-Netweaver 7
-GRCFND_A SP14
-GRCPINW SP13
Regards,
GustavoSAP just delivered a note to fix this issue. The number is 2022294.
-
I have create Logic App under Azure App Services, I am getting
error while using HTTP connector and calling POST action to a Web API which is deployed as website on Azure.
Following are the screen shots:
Login App Connector Diagram:
hemaMarking as answered since no response on request for more information - assuming that you found what was wrong in the inputs. Let us know if you're still having trouble.
http://twitter.com/joshtwist -
The back and forward buttons on Logitech mouse don't work
My logitech performance MX back and forward buttons don't work. I tried in safe mode and they still don't work. I tried creating a custom shortcut in logitech setpoint and that didn't work either. I tried using the native mouse driver and not logitech. No luck.
I really like this functionality. Is there a way to enable these buttons?Hi mike,
i'm not sure if this will help but how about this add-on called "Vimperator". It is easy to use and works like vim. (Try this as an alternate till we figure out the problem) :)
Hope that helped. -
for instance, if I searched a word on google, then clicked on a certain page of the results, then inside that page I entered a link, etc if I wanted to "go back" directly to the instance of google searching I could click on this arrow-button and I would be able to choose that exact moment instead of clicking several times on the "back" till I reached the desired past page
The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4 and later.
Use one of these methods to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can look at this extension:
* Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/ -
I have two buttons that I cant remove. The button < is located on the left of the tabs and > is located on the right of the tabs. These aren't back and forward buttons. How can I remove them?
[https://picasaweb.google.com/dookeybre/DropBox?authkey=Gv1sRgCLyTs7iUlqXE2QE#5594570123175636338 photo of the problem]Those buttons are used to scroll through the tabs if you have too many to display. If all of the tabs that you have open are visible, the buttons should not be displayed. If they are displayed all of the time there may be a problem with the theme that you are using.
-
I want to re-position the reload button to appear outside the address bar (on the left, next to the back and forward buttons), not where it is at the moment, which is at the extreme end of the address bar and is a real hassle to use. How can I do this?
To move the Stop and Reload buttons to their position to the left of the location bar you can use these steps:
* Open the Customize window via "View > Toolbars > Customize"
* Drag the Reload and Stop buttons to their previous position to the left of the location bar.
* Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
* Set the order to "Stop - Reload" or separate them otherwise (Space or Separator) to get two distinct buttons. -
I open 1 session of Firefox 5.0.1 and everything seems to work fine. Then I open a second session of Firefox and most of the time the navigation bar does not show the page that I am on and the back and forward buttons do not work. When this happens, the first session always remains working. I am an internet marketer so I have at least 2 or 3 sessions going at any given time.
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
My back and forward buttons do not work also the refresh button does not work, I have reloaded the latest version of fire fox and that did not help. All of navigation tool bar worked until I updated Fire Fox, now if I click on a link in yahoo, for instance, I can not get back to my yahoo home page without reloading Fire Fox. HELP please.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file -
The back and forward button stay disabled after upgrading to Firefox 4
I upgraded to Firefox 4 and the back and forward buttons are never enabled. I see them, but they are not working.
History works, recently closed pages work, bookmarks work.
I disabled all addons, uninstalled FF4, deleted \Program Files\Firefox, re-installed, kept extensions disabled, removed all backups from bookmarkbackups, deleted places.sqlite and still nothing.
What else can I do?Norton has a fix out. See: http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-5-5-incompatible-with-Firefox-4-RC1/td-p/411556/page/2
-
I have firefox 8.0.1 and my back and forward button are not working. They are visible but not functioning. I have tried starting in safemode and without any add-ons and the back and forward buttons are still not functioning. What do I need to do to make the buttons functional?
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file -
In firefox 4.0.1 the back and forward buttons are "dead".
In firefox 4.0.1 the back and forward buttons are "dead". My system runs WindowsXP. I tried many times: safe-mode, upgrade from FirefoxF3.6., reinstallation in a new folder, creating new profile...........BUT THE PROBLEM IS STILL THERE.!!! What am I suppose to do? NoteQ in my another computer at home i have WinXP and the Firefox4.0.1 works perfectly!!!! Am I crazy???
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
I've Firefox version: 3.6.8 , OS: Windows XP - The back and forward buttons disappears. Resetting customize toolbar to default doesn't solve the problem.
== This happened ==
Every time Firefox opened
== Firefox was updated to ver 3.6.8In Firefox 3.6 and later on Windows you can hide the menu bar via "View > Toolbars" or via the right click context menu on a toolbar.
Press F10 or press and hold the Alt key down to bring up the menu bar temporarily.
Go to "View > Toolbars" or right-click the menu bar or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also [[Menu bar is missing]] and http://kb.mozillazine.org/Toolbar_customization
Maybe you are looking for
-
In a popup the tree table data is not getting displayed properly
Hi, I have a taskflow which contains a tree table within a panelStetchLayout. Following is the taskflow code : <af:panelStretchLayout id="SecurityAdminManageRoles" bottomHeight="0" topHeight="auto" inlineStyle="width:725px;height:400px;"> <f:facet na
-
Using Acrobat X Pro 10.1.4, Win XP Pro. If I have two documents open, and am making comments in each, and try to copy-paste a comment from one document to the other, the comment comes in sideways and/or Acrobat freezes up requiring a forced close via
-
Whenever I connect my iphone 4 to my lap top i get a message saying digital still camera and the my laptop crashes, it is really frustrating, please help
-
Why is 'Open link in new tab' suddenly opening a new window?
When I right click, and choose 'Open link in new tab', it instead opens the link in a new window. This happened suddenly with seemingly no cause. I have checked and double checked the option "Open new windows in new tabs instead" but it was checked.
-
Cost element/cost center planning for period
Dear Guru`s, My client wan`t to plan the g/l with cost center/cost element period wise. How can I achieve this???