Graphical Planning Table can show quantity?

Dear all,
I am using Graphical Planning Table (MF50), the graphic shows the planned order number for each Material.
How can the graphic show the quantity for each Materials?
Pls help me to configure it.
Thank you very much!
Cao Huy

Hi Huy Cao,
why not to show the order QTY in the table section of the chart for each material? you could create a layout key containing the field GSMNG-PLAF and assign it to the layout of the charts - dispatched and pool via OPDJ.
Cheers,
Mao

Similar Messages

Customizing Graphical Planning Table Views

Where do I go to alter the look of the graphical planning tables that I find in transactions like CM21, 27, 31 and 32? There are no labels, everything is gray and difficult to read! Where can I go in and change the way these graphical planning tables look? Mainly the colors of the dispatched orders into the work centers (the single gray bars).

Dear,
Please refer this link,
[Lay-out Profile Set|New Lay-out Profile for CM25]
Regards,
R.Brahmankar

Configuring the graphical planning table (GPT)

Hi folks,
Can anyone help me out here, feeling a bit dumb
I am trying to configure the field layout for the orders pool on the GPT. I have identified my overall profile (SAPSFCG001), the planning table profile (SAPSFCL001), the layout ID (SAPSFCLA05) and the layout key (SAPSFCAS03)
When I edit the layout key SAPSFCAS03, I want to add the operation short text, I have found it in the list and added it to the layout key... all good so far.
When I run CM25 with my overall profile... for some reason the headers are correct but the actual column data is not ... i.e. it hasn't pulled through the operation short text for any orders and to make matters worse, the column headers and the actual data are now out of sync... so under the operation short text I have the work centre name ... what the ?!?!?!
clearly I am missing something here.
Any help would be greatly appreciated.... thanks

Dear ,
Please check in CY38-Lay out key -SAPSFCAS03-Hit change pencil -Please do the following :
1.Remove the high lighte mark from existing Operation Short text column and select the Standatd one ( Operation Short Text line -It will be in down botton -Operation row started with AFVGD -Field lenght 97 ) .
Accordingly mark those field which you want to bring into CM25 taking refernce of Standrad one .
2.Then you hit the Sequence and heading text .
3.Now select the high ligthed row and hit the Select icon ( ink-nip mark ) to move as per your sequence .
4.Finally re-chek with preview and SAVE.
Hope this clarifies
Regards
JH

IMG setting for REM Planning Table

Hi Gurus,
Can any one throw light on following IMG settings-
Path -
IMG --> Production --> REM --> Planning --> Planning table --> Maintain Row selection --> Reciepts Other version
Relevance of "Other version - in IMG setting for visible rows in planning table".
Planning table output does not change with check or uncheck of version.
Which check or unchecking, planning table is considering all the production versions of the materials maintained.
What is purpose of having a check or uncheck, if system is giving the same result.
Regards,
Srini

Hi Srini,
We create production version to OPTIMIZE the production. We mention the routing and the BOM in the production version. Actually speaking, in the REM scenario we don't even need a planned order. Production order is absolutely not needed. So in the planning table, it shows the production data for all the versions that you have created, irrespective of whether or not you check the indicator. During planning run, the system will take the first production version by default. So in the planning table you can see the optimum production and you can do leveling also, possible through the row selection option in IMG. Hope this sheds a light on your concern.
Regards,
Sreekant.

Which table can we see consumption and forecast values in forecast based planning

Dear SAP Gurus,
I am working on implementing forecast based planning for Spare parts for my client. They have one Main Plant which do purchase of Spare Parts and through Stock transfers moved to 60+ Plants from where Spares are being sold.
Now I am carrying out SAP trial runs for a set of 160+ materials with various models and want to compare with their existing methodology of requirement calculation.
I want to compile Consumption and Forecast data month wise for these trial materials (160+ materials in 60 Plants) . One way I thought is to go individual Material Master and looks for values in Forecast view. However it is tedious and time consuming.
The table name shows RMCP2 and RM03M for forecast and Cons values, but I could not find the table.
Hence I want to know which table if I can view I can get the consumption and forecast data calculated for quick copying and compilation.
Thanks and Regards,
R.Velmurugan.

Dear Mariano,
Thanks for your valuable inputs.
Like I could able to get the consumption values for materials using table MVER and fields GSV01,GSV02 etc.,
What field I need refer in table PROP for getting forecast values.
As such I could not see any column where in data are similar to Forecast view.
Thanks and Regards,
R.Velmurugan.

Table name which can show a list of customersfor an output type

Hi All,
Can you please tell me the table name which can show me the list of customers if a particular output type is mentioned in the selection screen.
Thank you,
Regards,
Shanu.

Hi,
Table B001.
Goto SE16 enter B001
Application : V1 - sales, V3 - Billing
enter output type - BA00 or RD00 and press F8.
Regards,
Chandrasekhar.S
Edited by: chandra sekhar S on Aug 12, 2008 12:28 PM
Edited by: chandra sekhar S on Aug 12, 2008 12:36 PM

From which table can I display PGI (material and quantity)for a spesific cu

Dear gurus,
From which table can I display PGI (material and quantity)for a spesific customer order?
Thanks in advance

HI
PGI and material quantity can be available in MSEG table
for this enter the sales order number in KDAUF or* MAT_KDAUF* fields in MSEG table
Also try with LIPS delivery item table and LIKP table
regards
SAP SD
Edited by: sapkpit_sd on Jul 22, 2010 8:14 AM

How Can I create plan Table

Dear Experts,
How Can I create plan Table.
How can i read it?

run UTLXPLAN.SQL
under
$ORACLE_HOME/rdbms/admin/
check this link for detailed information
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14211/ex_plan.htm#i19260

Why plan table showing 1 rec

SQL> CREATE TABLE A (ID NUMBER)
2 /
Table created.
SQL> EXPLAIN PLAN FOR SELECT * FROM A
2 /
Explained.
SQL> SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY)
2 /
PLAN_TABLE_OUTPUT
Plan hash value: 1222032187
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 13 | 2 (0)| 00:00:01 |
| 1 | TABLE ACCESS FULL| A | 1 | 13 | 2 (0)| 00:00:01 |
Note
PLAN_TABLE_OUTPUT
- dynamic sampling used for this statement
12 rows selected.
why plan table showing one record when i have no record in table a.
regards

This is because you did not analyze the table, and if it was analyzed, it maps a zero to a one. Please not that my test is not in 10g but on 9iR2, where non analyzed tables have null values in their estimated cardinalities.
SQL> create table a (id number)
2 /
Tabel is aangemaakt.
SQL> explain plan for select * from a
2 /
Uitleg is gegeven.
SQL> select * from table(dbms_xplan.display)
2 /
PLAN_TABLE_OUTPUT
| Id | Operation            | Name       | Rows | Bytes | Cost |
|   0 | SELECT STATEMENT     |             |       |       |       |
|   1 | TABLE ACCESS FULL   | A           |       |       |       |
Note: rule based optimization
9 rijen zijn geselecteerd.
SQL> exec dbms_lock.sleep(1)
PL/SQL-procedure is geslaagd.
SQL> insert into a values (1)
2 /
1 rij is aangemaakt.
SQL> explain plan for select * from a
2 /
Uitleg is gegeven.
SQL> select * from table(dbms_xplan.display)
2 /
PLAN_TABLE_OUTPUT
| Id | Operation            | Name       | Rows | Bytes | Cost |
|   0 | SELECT STATEMENT     |             |       |       |       |
|   1 | TABLE ACCESS FULL   | A           |       |       |       |
Note: rule based optimization
9 rijen zijn geselecteerd.
SQL> exec dbms_lock.sleep(1)
PL/SQL-procedure is geslaagd.
SQL> insert into a select level from dual connect by level <= 9
2 /
9 rijen zijn aangemaakt.
SQL> explain plan for select * from a
2 /
Uitleg is gegeven.
SQL> select * from table(dbms_xplan.display)
2 /
PLAN_TABLE_OUTPUT
| Id | Operation            | Name       | Rows | Bytes | Cost |
|   0 | SELECT STATEMENT     |             |       |       |       |
|   1 | TABLE ACCESS FULL   | A           |       |       |       |
Note: rule based optimization
9 rijen zijn geselecteerd.
SQL> exec dbms_lock.sleep(1)
PL/SQL-procedure is geslaagd.
SQL> truncate table a
2 /
Tabel is afgekapt.
SQL> exec dbms_stats.gather_table_stats(user,'A')
PL/SQL-procedure is geslaagd.
SQL> explain plan for select * from a
2 /
Uitleg is gegeven.
SQL> select * from table(dbms_xplan.display)
2 /
PLAN_TABLE_OUTPUT
| Id | Operation            | Name       | Rows | Bytes | Cost (%CPU)|
|   0 | SELECT STATEMENT     |             |     1 |    13 |     3 (34)|
|   1 | TABLE ACCESS FULL   | A           |     1 |    13 |     3 (34)|
7 rijen zijn geselecteerd.
SQL> exec dbms_lock.sleep(1)
PL/SQL-procedure is geslaagd.
SQL> insert into a values (1)
2 /
1 rij is aangemaakt.
SQL> exec dbms_stats.gather_table_stats(user,'A')
PL/SQL-procedure is geslaagd.
SQL> explain plan for select * from a
2 /
Uitleg is gegeven.
SQL> select * from table(dbms_xplan.display)
2 /
PLAN_TABLE_OUTPUT
| Id | Operation            | Name       | Rows | Bytes | Cost (%CPU)|
|   0 | SELECT STATEMENT     |             |     1 |     3 |     3 (34)|
|   1 | TABLE ACCESS FULL   | A           |     1 |     3 |     3 (34)|
7 rijen zijn geselecteerd.
SQL> exec dbms_lock.sleep(1)
PL/SQL-procedure is geslaagd.
SQL> insert into a select level from dual connect by level <= 9
2 /
9 rijen zijn aangemaakt.
SQL> exec dbms_stats.gather_table_stats(user,'A')
PL/SQL-procedure is geslaagd.
SQL> explain plan for select * from a
2 /
Uitleg is gegeven.
SQL> select * from table(dbms_xplan.display)
2 /
PLAN_TABLE_OUTPUT
| Id | Operation            | Name       | Rows | Bytes | Cost (%CPU)|
|   0 | SELECT STATEMENT     |             |    10 |    30 |     3 (34)|
|   1 | TABLE ACCESS FULL   | A           |    10 |    30 |     3 (34)|
7 rijen zijn geselecteerd.Regards,
Rob.

No application showing in planning web & can't connect to admin console

Hi,
Planning web screen showing 'No aApplication available" even though I worked with planning application yesterday also and after that I am sure nobody have deleted that application. Also I can't login into essbase admin console as it is showing "cannot connect to administration server" though I have checked in services console that hyperion administration services is running.
One exception I got is shared services is not running. So I started that but after some time automatically went to stopped mode. Then I stopped all the services and restart the server and restart the services sequentially---- no hope. Same problem still there.
Can you please suggest how to solve the aforesaid?
Thanks & Regards.

Hi,
Thanks for your reply. I have tried that but still the same error having in admin console. I have not craeted/modified anything in planning cluster in last some days. The problem is that all services is started properly except 'shared services' service. When I go to start that it is starting and showing started but after some time, automatically stopped. I also tried the following-----
1) Stopped all the other services except OpenLDAP
2) then started the shared services from start-> run-> hyperion-> foundation services-> start shared services
and got the error like---
Driver][Oracle]ORA-12505 Connection refused, the specified SID (xxxxx) was no
recognized by the Oracle server.
Database configuration test failed. Use Configuration Utility to configure the
atabase connectivity
Unable to connect to database. Will try to re-connect after sleeping for 30 sec
nds...
Attempting to connect to database: Retry Count: 1
Unable to connect to database. Will try to re-connect after sleeping for 30 sec
nds...
Don't know what is happening....Any idea about the same? How could the problem be solved?
OR should I reinstall hyperion afresh.....
Regards.

Planning Planned order in planning table graphic (PP-PI)

Is it true that cannot plan planned orders, that will be destined to process orders in the table of graphical planning? (CM25).
Because I tested with all the profiles standard and no one leaves me to dispach planned order....
Thanks regards

Hi
Try following things in spro in development & test
goto
Capacity requirement Planning-Operation-scheduling-scheduling paramets for Planned order
This may of help.
regards
Prakash

Operations are not getting despatched in capacity planning table

Hi Experts,
I am using capacity planning table (Graphical) to level the capacities and sequence the process orders. The start date of my orders are very well in future and sufficient capacities also is available in resources. But when I go to CM25 and select one order and click on despatch, system is not despatching it. This is the case for almost all the overall profiles.
The surprising factor is, this function was working fine earlier without any issues. I havent done any changes in configs which will affect capacity planning.
What can be the reason for this? Any thoughts please?.
One more thing. Is there any option to avoid the capacity planning step if Iam using R/3 and manage it by some other way?
Appreciate your earlier reply
Thanks & Regards
Prathib

Most likely you didnt define the rowsource key properly. Please look under <install>/errors folder for any file there.
Also, please read the documentation. There is information there about how to troubleshoot a loading problem. Please always read the documentation and we would appreciate feedback on the documentation.
http://download.oracle.com/docs/cd/E17236_01/epm.1112/iop_user_guide/frameset.htm?launch.html

How to recover a corrupted MSWord Document - corrupted graphics / corrupted tables

Hello i am hoping to find someone who can guide me in recovering a word document for me... I was working on it had my auto save set to every 4 mins and all
was well. closed ms word normally only to find the next time i open i get "a table in this document has been corrupted..."
Just to be clear i know all about word open and repair and recovering the last saved file etc. Those are not working. I get my file back but several graphics and
tables are missing/messed up.
I am hoping that someone has some insight into this (maybe some document repair software that works well) and can help me restore the document or at least open
it somehow with the original pics showing so that at least i know how to make changes to the new document.
Hope this makes sense. very urgent.

If you're using Windows 7, the built-in shadow copy centre may have an older and uncorrupted version of your file.
Launch Explorer, right-click the folder that contained the document and select Properties.
If you see a Previous Versions tab then click that.
If all is well then you'll see a list of entries for the folder, going back days, or maybe weeks.
Double-click one with a date when you know the document was readable, and try opening this older version.
Save it with a new name, and then repeat the process with later folder entries until you reach the point where the file became corrupted.
If methods above didn’t work for you, you can use undelete tools like Any Data Recovery Pro (http://www.any-data-recovery.com/product/datarecoveryprofessional.htm)
or Revuca (http://www.piriform.com/recuva/features) to help you find old Office temporary files. After that, rename the TMP extension to match the real document format, and then try opening it to see what you've recovered.

Planning table

Hello,
In planning table MF50 , the row 'not yet assigned ' is displayed from where we can assign plnd orders to any Packign line.
But when i assign the qty from this row to any other packing line the qty from 'not yet assigned ' is not getting deducted . What settings i need to do ?
Also can i assign by default some planned orders to any packing line.
Regards
ShankarR

Dear,
In MF50 select the row of 'not yet assigned and press Shift + F1 period you want then assign the quantity then use copy function and check. Tere you will get Truck symbol click on it you will get assign quantity.
When you try to assign 50% or less of the quantity to any version, system is taking the correct values in assigned and not yet assigned rows. But when you try to assign more than 50% to any version, system is taking only the assigned quantity as assigned and remaining quantity which is not yet assigned, is not displayed. For that use the OSS note 1104677
Hope it will help you.
Regards,
R.Brahmankar

Use of Planning Table (MF50) in Capacity Levelling with Production Order

Hello Experts
I wish to know that is it possible to perform Capacity Levelling in planning table (tcode MF50) with respect to a Production Order ? It is known that MF50 is used in Repetitive manufacuring to do the capacity levelling with respect to Planned orders. But in our discrete manufacturing scenario we want to use planning table to the capacity levelling with respect toa Production order.
Any clue or help pertaining to this will be highly appreciated.
Thanks in advance
Regards
Jayanta

Dear ,
MF50 is does the cacapcity leveling based on mateail -run schedule order (planned order ) where as in discrete manufacturing , when you run the MRP , MRP system assume Infinite Capacity and schedule the order as per your selection in MD02(2,1,3,3,2) and then you convert those planned order to Production order .Here you checkied the Capacity in Production Order level .
In stanadrd SAP , it is not possible to use MF50 for discrete production order.
In discrete order or process order , do the caapcity leveling , there are seperate planning table available based on Over all Capacity Profile and Schedule type .This can be done in following way :
1.CM31-Production Order Wise -Tabular
2.CM23-PO wise -Graphical
3.MC88: Ruf Cut Planning
Work Centre Wise : CM21 -Graphical , CM22-Tabular Planning Table .
Make sure the below set up before you carry on the Capacity leveling :
.Define time profile in OPD2.
Define the strategy profile in OPDB
Define the Overall profiles in OPD0.
In OPJK maintained check capacity with SAPSFCG013 profile for your production order type
In OPU3 , scheduleing parametre s: Generate Capacity , Scheduling Type , Automatic Log ,Start date in Past as per your req.
In OPJU , chekc the contol tab of the scheduleing as per OPU3
In OPKP- Production scheduling paranmeters assing the overall capacity profile -SAPSFCG013 with finte scheduling tick.
Master Data :
1.Materials Master define the Production scheduler and production scheduling profile
2.Work Center - Define the capcity planner group,activate checkbox Relevant for Finite sceduling,on the capacity header define the shift timings,break timings and unit of measure,no of individual capaity, enter formula for scheduling in capacity view.
3.Routing - enter the values for the standard values. Use control key with scheduling.
Hope this will help you .
Regards
JH

Graphical Planning Table can show quantity?

Similar Messages

Maybe you are looking for