Graphical scheduling

Hi All,
I am newbie in thie forum I need graphical scheduling to show the production order start date and due date planning. Is it available in SAP B1 ? If not, how to make it available easily in SAP B1 ? I need it because our PPIC department requires it.
Raj

Hi Raj,
The particular feature you're refering to, is not available in Base model of SAP B1.
Please check with your Implementation & Support Partners, for developing your specific requirements in SAP or provide a suitable add-on for the same.
There are add-ons available in the market. Theses addon are developed by SAP Channel Partners. Depending on your requirements you can choose which one to use.
For example – Pre-actor is a scheduling tool which is used by large manufacturing & tool designing industries like Tyco and Microshop is another scheduling addon tool for small companies.
Do contact me for any further information on these products.
Also, Assign points if useful.
Thanks,
Srikanth

Similar Messages

  • IP19- Graphic Scheduling Overview and Simulation# Issue.

    Dear All,
    Good Day,
    I have  run transaction IP19 for a perticular Maintenance plan and I did "Release Call"
    by clicking relevent icon. Its changend in Green Color ("CALLED ICON") also I saved
    the same.
    When i checked related  Maintenance plan, it dosen't have released  scheduled.
    But when i do through IP10 its getting released by cliking Green Flag.
    Please suggest me what could be the reason for the IP19 Issue.
    Best Regards,
    KSK

    HI Suresh
    TCODE IP19
    Enter your Equipment in the input field.
    Execute
    Then, Select your plan from the Equipment. It will display the Scheduled Call objects
    Select it and click Release Icon
    You will get the order no.
    Go to ip10...
    select the scheduled object, it will be displayed "called"
    Select the called object and click display (to display the order)
    You cannot release the order twice
    - pithan

  • Is incredible , i can repair my mac book pro for the graphic schedule

    I can't believe , is impossible to repair my mac book pro sn W87100M2W0L, BECOUSE IS VINTAGE AFTER 5 yers, hope the Apple give me a solution, i'm worry, and if isn't possible to repair i close with Appke and all the products who i have, sorry for my english.

    You don't provide much to go on, however, it sounds like you have a video issue with your MBP and Apple has told you it can't repair it, due to it's age?   If that's the case, used logic boards are available for purchase, and an Apple Authrorized Service Provider should be able to install it for you.

  • Major differences between BW 2.1C, 3.0B

    Could some one throw some light on the major enhancements in 3.0B compared to 2.1 version of BW?
    Thanks in advance,
    Ram

    There are some of the adv..of 3.0 over 2.1C:
    XML support for reading and writing metadata and data.
    - Web application designer: graphically design and publish web reports and web applications.
    - Open Hub Service for distributing data to other tables/systems on a schedule.
       It supports selection, projection, and aggregation. Integrated into the BW monitor.
    - Process Chains and graphical scheduler for automating complex processes.
       Supports branching, condition testing, etc. Enables you to schedule all admin functions in a graphical, drag-and-drop
       fashion, including extracts, index drops and rebuilds, activating data, compressing, rolling up to aggregates, etc.
    - Transactional ODS objects with read/write API.
    - Transfer rules for hierarchies.
    - Subtree insert and subtree update for hierarchies.
    - Active attributes on hierarchies (sign flip, etc.)
    - Load, stage, and merge master data to ODS.
    - DB Connect Service allows BW to extract data from any DBMS supported by SAP R/3.
    - Formula editor in transfer and update rules to avoid ABAP coding.
    - Toolbox of standard transformations such as substring, look up data in a table, concatenate, offset and length, 
       arithmetic operations, etc.
    - Parallel loading into a single ODS object.
    - Secondary index maintenance for ODS objects built in to BW Admin Workbench.
    - Multiprovider: Use ODS objects, master data, and cubes in a multicube (now called multiprovider.)
    - New InfoSet Concept: join tabular data together and make it available for reporting. You can join ODS objects,
       master data tables, etc.
    - Archiving: Built-in tools to archive data on a schedule using selection criteria.
       Integrated into BW monitor; archived data deleted from InfoCubes and corresponding aggregates. 
       Support for re-loading data from archives as necessary.
    - BW Monitor includes all activities of process chains, open hub service, and archiving.
    - Use multiple hierarchies in a BW query.
    - Use a mix of hierarchies and characteristics on rows or columns in a BW query.
    - Use restricted key figures in a calculated key figure.
    - Generate static, offline web reports.
    - BEx Cell Editor: In queries with two structures, you can now reference cells at the intersections of rows and columns.

  • QM Tables and T codes

    can anybody tell hw many QM Tables and T codes are ther in total approx.
    and if possible which r imp. one?atleast tables.
    thnx

    Dear Sandip,
    <b>Important QM Tables</b> 
    Area Table Description 
    Master Data QMAT Inspection type - material parameters 
    Master Data QMHU QM Link Between Inspection Lot and Handling Unit Item 
    Master Data QMTB Inspection method master record 
    Master Data QMTT Inspection Method Texts 
    Master Data QPAC Inspection catalog codes for selected sets 
    Master Data QPAM Inspection catalog selected sets 
    Master Data QPMK Inspection characteristic master 
    Master Data QPMT Master Inspection Characteristics Texts 
    Master Data QPMZ Assignment table - insp. methods/master insp. characteristic 
    Master Data TQ01D Authorization groups for QM master data 
    Master Data TQ01E Text authorization groups for QM master data 
    Master Data TQ21 Assignment of screens to screen groups 
    Master Data TQ25 QM:screen sequence for master and inspection characteristics 
    QM Master Data 
    Catalog QPCD Inspection catalog codes 
    Catalog QPCT Code texts 
    Catalog QPGR Inspection catalog code groups 
    Catalog QPGT Code group texts 
    Catalog TQ07 Follow-Up Action for Usage Decision of Inspection Lot 
    Catalog TQ07A QM: Function Modules for Follow-Up Action 
    Catalog TQ07T Language-dependent texts for Table TQ07 
    Catalog TQ15 Inspection catalog type index 
    Catalog TQ15T Language-dependent texts for table TQ15 
    Catalog TQ17 Defect classes 
    Catalog TQ17T Language-dependent texts for table TQ17 
    Catalog 
    Sample Determination QDEB Allwd. Relationships: Sampling Procedures/Dynamic Mod. Rules 
    Sample Determination QDEBT Allowed combinations of procedures/dynamic mod. rules: texts 
    Sample Determination QDPA Sampling scheme-instructions 
    Sample Determination QDPK Sampling scheme header 
    Sample Determination QDPKT Sampling scheme: texts 
    Sample Determination QDPP Sampling scheme item 
    Sample Determination QDQL Quality level 
    Sample Determination 
    Inspection Char TQ17A Weighting of Char 
    Inspection Char TQ11 Inspection Qualification 
    Inspection Char TQ29 Tolerance Keys 
    Inspection Char T006 Unit of measurement 
    Inspection Char 
    Dynamic Modification QDBM Valuation mode 
    Dynamic Modification QDBMT Valuation Mode: Texts 
    Dynamic Modification QDDR Dynamic modification rule (header) 
    Dynamic Modification QDDRT Dynamic modification rule: texts 
    Dynamic Modification QDEP Allowed inspection severities 
    Dynamic Modification QDEPT Allowed Inspection Severities: Texts 
    Dynamic Modification QDFB Function modules for the individual procedure categories 
    Dynamic Modification QDFBT Function Modules for Procedure: Texts 
    Dynamic Modification QDFM Function modules for valuation mode 
    Dynamic Modification QDFMT Function Modules for Valuation Mode: Texts 
    Dynamic Modification QDPS Inspection stages for a dynamic modification rule
    Dynamic Modification QDPST Inspection Stages: Texts 
    Dynamic Modification QDSA Sampling type 
    Dynamic Modification QDSAT Sampling Type: Texts 
    Dynamic Modification QDSV Sampling procedure 
    Dynamic Modification QDSVT Sampling Procedure: Texts 
    Dynamic Modification TQ39B QM : Activates reference for dyn. modification level 
    Dynamic Modification 
    Graphics & SPC QASH Quality control chart 
    Graphics & SPC QAST Control chart track 
    Graphics & SPC QPSH Control chart types 
    Graphics & SPC QPSHT Texts for control chart types 
    Graphics & SPC QPSP SPC criterion 
    Graphics & SPC QPSPT Texts for SPC criteria 
    Graphics & SPC QPST Control chart track 
    Graphics & SPC QPSTT Texts for control chart tracks 
    Graphics & SPC 
    Specifications QMSP QM: material specification 
    Specifications 
    Inspection Plan PLKO Inspection plan Header 
    Inspection Plan MAPL Material Assignement 
    Inspection Plan PLPO Operation Details 
    Inspection Plan PLMK Inspection plan characteristics 
    Inspection Plan PLMW MAPL-Dependent Charac. Specifications (Inspection Plan) 
    Inspection Plan TQ03 QSS: Control for Screen Texts/TABLE NOT USED (Rel. 4.6) 
    Inspection Plan TQ29A Dependency tolerance key - nominal measurement 
    Inspection Plan TQ72 Type of share calculation 
    Inspection Plan TQ72T Texts for type of share calculation 
    Inspection Plan TQ75 QM formula parameters 
    Inspection Plan TQ75F Field names for QM formulas 
    Inspection Plan TQ75K Short text for Table TQ75F 
    Inspection Plan TQ75T Description of formula parameters 
    Inspection Plan 
    Qm in procurement QINF QM-info record for material and vendor 
    Qm in procurement TQ02 QM system definition 
    Qm in procurement TQ02A QM system assignment and QM system requirements 
    Qm in procurement TQ02B QM system 
    Qm in procurement TQ02T QM system description 
    Qm in procurement TQ02U Description QM system 
    Qm in procurement TQ04A Functions that can be blocked 
    Qm in procurement TQ04S QM block functions : texts 
    Qm in procurement TQ05 QM certificate categories for procurement 
    Qm in procurement TQ05T QM: text table for certificate types 
    Qm in procurement TQ08 Control of QM in procurement 
    Qm in procurement TQ08T QM: text for QM procurement keys 
    Qm in procurement TQ09 QM: agreement of QM document types 
    Qm in procurement TQ09T QM: agreement of QM document types 
    Qm in procurement TQ32A Inspection type to status assignment from status profile 
    Qm in procurement 
    QM in SD QVDM QM Info Record - QM Control in SD 
    QM in SD TQ32B Find insp.type for quality insp. for delivery note 
    QM in SD 
    Inspectio lot QALS Inspection lot record 
    Inspectio lot QALT Partial lot 
    Inspectio lot T156Q Movement Type: Material-Independent Control 
    Inspectio lot TQ30 Inspection types 
    Inspectio lot TQ30T Texts for inspection types 
    Inspectio lot TQ32 Assignment of inspection type to origin 
    Inspectio lot TQ32C Lot creation allowed values for the origin 
    Inspectio lot TQ32C _T Texts for lot creation indicator 
    Inspectio lot TQ33 Relevant fields for origin 
    Inspectio lot TQ34 Default values for inspection type 
    Inspectio lot 
    Inspection point QAPP Inspection point 
    Inspection point TQ79 Table with inspection point/user field combinations 
    Inspection point TQ79T Key words for inspeciton point user fields 
    Inspection point 
    Results Recording QAES Sample unit table 
    Results Recording QAKL Results table for value classes 
    Results Recording QAMR Characteristic results during inspection processing 
    Results Recording QAMV Characteristic specifications for inspection processing 
    Results Recording QASE Results table for the sample unit 
    Results Recording QASR Sample results for inspection characteristics 
    Results Recording QASV Sample specifications for inspection processing 
    Results Recording TQ12 Ind. external numbering for test units in results recording 
    Results Recording TQ12T Texts for the ind. for ext. numbering of units to be insp. 
    Results Recording TQ70 Control table for results recording 
    Results Recording TQ70C Function codes for navigation from the char.overview screen 
    Results Recording TQ70E Screen-based processing tables 
    Results Recording TQ70F Navigation during results recording 
    Results Recording TQ70S Characteristic overview screen for results recording 
    Results Recording TQ73 Origin of results data 
    Results Recording TQ73T Texts for origin of results data 
    Results Recording TQ74 Recording configuration 
    Results Recording TQ74T Recording configuration 
    Results Recording TQ76 Processing status of inspection characteristics 
    Results Recording TQ76T Texts for the processing status of insp. characteristics 
    Results Recording TQ77 Attributes for the Inspection Characteristic 
    Results Recording TQ77T Text Tables for Attributes 
    Results Recording TQ78 Status-dependent processing table for insp. characteristics 
    Results Recording TQ78T Texts for the status-specific proc. table for insp. char. 
    Results Recording 
    Defects recording TQ84 Confirmation profile 
    Defects recording TQ84T Text table for confirmation profile 
    Defects recording TQ86 Report category for defects recording 
    Defects recording TQ86A Assignment report category for work center 
    Defects recording TQ86T Text table for report category 
    Defects recording V_T35 2B_F Generated table for view V_T352B_F 
    Defects recording 
    Usage decision QAMB QM: Link Between Inspection Lot and Material Document 
    Usage decision QAVE Inspection processing: Usage decision 
    Usage decision TQ06 Procedure for Calculating the Quality Score 
    Usage decision TQ06T Language-specific texts for Table TQ06 
    Usage decision TQ07M QM: Inventory postings with usage decision 
    Usage decision 
    Sample Mgmt QPRN Sample drawing of phys. samples 
    Sample Mgmt QPRS Master record for phys. samples 
    Sample Mgmt QPRVK Sample-drawing procedure 
    Sample Mgmt QPRVK T Header for sample drawing procedure texts 
    Sample Mgmt QPRVP Sample-drawing items 
    Sample Mgmt QPRVP T Items for sample drawing procedure texts 
    Sample Mgmt TQ40 Definition of sample types 
    Sample Mgmt TQ40T Text table for sample type 
    Sample Mgmt TQ41 Storage locations for physical samples 
    Sample Mgmt TQ41T Texts for storage locations 
    Sample Mgmt TQ42 Physical sample containers 
    Sample Mgmt TQ42T Texts for phys. sample containers 
    Sample Mgmt 
    QMIS S068 Vendor statistics 
    QMIS S069 Material statistics 
    QMIS S097 QM notifications: Matl anal. 
    QMIS S098 QM notification: Vendor anal. 
    QMIS S099 QM notifications: Cust. anal. 
    QMIS S100 Problems: Material analysis 
    QMIS S102 Problems: Vendor analysis 
    QMIS S103 Problems: Customer analysis 
    QMIS S104 Customer statistics 
    QMIS S161 Inspection results: General 
    QMIS S162 Quantitative insp. results 
    QMIS S163 Quant. Insp. Result: Vendor 
    QMIS S164 Quant. Insp. Result: Vendor 
    QMIS S165 Inspection result: gen. custs 
    QMIS S166 Insp. Results: Quant. Customer 
    QMIS TQ55 Assign inspection lot origin for update group 
    QMIS TQ56 Definition of quality score classes 
    QMIS TQ56T Text table for the definition of quality score classes 
    QMIS TQ57 Assignment of quality score key to info structure 
    QMIS 
    Quality Certificates QCPR QM quality certificates in procurement 
    Quality Certificates I000 Conditions for certificate profile 
    Quality Certificates KONDI Conditions: Data part for certificates 
    Quality Certificates QCVK Certificate profile header 
    Quality Certificates QCVM Certificate profile characteristic level 
    Quality Certificates QCVMT Certificate profile characteristic level: texts 
    Quality Certificates QCVV Certificate Profile: List of Preliminary Products 
    Quality Certificates TQ61 Result value origin for certificates 
    Quality Certificates TQ61T Origin of result values for certificates: texts 
    Quality Certificates TQ62 Output strategy for skip characteristics 
    Quality Certificates TQ62T Output strategy for skip characteristics: texts 
    Quality Certificates TQ63 Origin of insp. specs for certificates (function modules) 
    Quality Certificates TQ63T Origin of inspection specifications for certificates: texts 
    Quality Certificates TQ64 Origin of characteristic short text for certificates 
    Quality Certificates TQ64T Origin of characteristic short text for certificates: texts 
    Quality Certificates TQ65 Certificates: Combinations allowed for origins, specs/values 
    Quality Certificates TQ67 Certificate-Relevant Output Types 
    Quality Certificates 
    Quality Notification QMEL Notification header 
    Quality Notification QMFE Item 
    Quality Notification QMSM Task 
    Quality Notification QMMA Activities 
    Quality Notification T352C Catalog types for each catalog profile 
    Quality Notification TQ81 Notification Scenario 
    Quality Notification TQ81V Usage of parts 
    Quality Notification TQ81V_T Texts for usage of parts 
    Quality Notification TQ81_T Texts for Notification Scenarios 
    Quality Notification TQ82 Change of Notification Type 
    Quality Notification TQ83 Partner Functions for Codes 
    Quality Notification TQ85 Function table for follow-up functions 
    Quality Notification TQ85R Rules for Follow-Up Functions 
    Quality Notification TQ85_T Action box text table 
    Quality Notification TQ8CO Assignment of reference orders to notification type 
    Quality Notification 
    Other Objects MARA Material Number 
    Other Objects T001W Plant 
    Other Objects LFA1 Vendor 
    Other Objects KNA1 Customer 
    Other Objects AUFK Order Number 
    Other Objects SAFK Run Schedule Header Number 
    Other Objects MCH1 Batch Number 
    Other Objects MCHA Batch Record 
    Other Objects EKKO Purchasing Document Header 
    Other Objects EKPO Purchasing document Item 
    Other Objects EKET Delivery Schedule 
    Other Objects VBUK Delivery Header 
    Other Objects VBUP Delivery Item 
    Other Objects CSKS Cost Center 
    Other Objects EQUI Equipment Number
    <b>Transaction List:</b>
    Q000    Quality management
    QA00    Quality inspection
    QA01    Create Inspection Lot
    QA01A   Create Inspection Lot
    QA02    Change Inspection Lot
    QA02A   Change Inspection Lot
    QA03    Display inspection lot
    QA05    Job planning: Periodic inspection
    QA06    Job overview: Periodic inspection
    QA07    Trigger for recurring inspection
    QA07L   Deadline Monitoring Log
    QA08    Collective Processing of Insp. Setup
    QA09    No. range maintenance for insp.lots
    QA10    Trigger automatic usage decision
    QA10L   Log for Automatic Usage Decision
    QA11    Record usage decision
    QA12    Change usage decision with history
    QA13    Display usage decision
    QA14    Change UD without history
    QA16    Collective UD for accepted lots
    QA17    Job planning for auto usage decision
    QA18    Job overview for auto usage decision
    QA19    Automatic usage decision
    QA22    Change inspection point quantities
    QA23    Display insp.point quantities
    QA32    Change data for inspection lot
    QA32WP  QA32 -Call from Workplace/MiniApp
    QA33    Display data for inspection lot
    QA40    Auto. Usage Decision for Production
    QA40L   Log for Automatic Usage Decision
    QA41    Scheduling UD for Production Lots
    QA42    Job planning: UD prod. insp.lots
    QA51    Scheduling Source Inspections
    QA52    Source inspections: Job overview
    QAC1    Change insp. lot actual quantity
    QAC2    Transfer stock to insp. lot
    QAC3    Reset sample
    QAER    Display archive objects
    QAS1    Download Insp. Specs. (Obsolete)
    QAS2    Download Basic Data (Obsolete)
    QAS3    Upload Results (Obsolete)
    QAS4    Upload UD (Obsolete)
    QC01    Create certificate profile
    QC02    Change certificate profile
    QC03    Display certificate profile
    QC06    Immediate delete of cert. profiles
    QC11    Create cert. profile assignment
    QC12    Change cert. profile assignment
    QC13    Display cert. profile assignment
    QC14    Create cert.prof.assign.w/copy model
    QC15    Create cert. profile assignment
    QC16    Change cert. profile assignment
    QC17    Display cert. profile assignment
    QC18    Create cert.prof.assign.w/copy model
    QC20    Certificates for Deliveries
    QC21    Quality certificate for the insp.lot
    QC22    Quality Certificate for Batch
    QC31    Archive display: Delivery item
    QC32    Archive display: Inspection lot
    QC40    Internet Certificate for Delivery
    QC40A   Internet Certificate for Delivery
    QC42    Batch certificate on WWW
    QC51    Create certificate in procurement
    QC52    Change certificate in procurement
    QC53    Display certificate in procurement
    QC55    Worklist: Certificates - Procurement
    QCC0    QM: Direct Access to IMG
    QCC1    Direct Access to IMG: Notification
    QCC2    IMG Direct Access: QM Q-Notification
    QCC3    IMG Direct Access: QM Q-Inspection
    QCC4    IMG Direct Access: QM Q-Planning
    QCC5    IMG Direct Selection: QM Bus. Add-In
    QCC_STABI       Copy Stability Study Customizing
    QCC_STABI_NK    Copy Stability Study Number Ranges
    QCCC    QM standard settings complete
    QCCF    QM standard forms
    QCCK    QM standard settings: Catalogs
    QCCM    QM std. settings: Qual. notifs.
    QCCN    QM standard number ranges
    QCCP    QM std. settings: Quality planning
    QCCS    QM sampling schemes
    QCCT    QM standard texts
    QCCU    QM standard settings: Environment
    QCCW    QM std. settings: Quality inspection
    QCCY    Transport QM tolerance key
    QCCZ    QM std. settings: Qual. certificates
    QCE2    Edit Communication Support
    QCE3    Display Communication Support
    QCYF    QM standard forms (general)
    QCYT    QM standard texts (general)
    QD21    Mark completed notifications
    QD22    Archiving Notifications: Archive
    QD24    Archiving Notifications: Delete
    QD25    Archiving Notifications: Admin.
    QD33    Delete quality level
    QD34    Delete quality level planning
    QD35    Delete job overview for Q-levels
    QDA1    Edit sampling type
    QDA3    Display sampling type
    QDB1    Maintain allowed relationships
    QDB3    Display allowed relationships
    QDH1    Q-level evaluation: Change data
    QDH2    Q-level evaluation: Display data
    QDL1    Create quality level
    QDL2    Change quality level
    QDL3    Display quality level
    QDM1    Edit valuation mode
    QDM3    Display valuation mode
    QDP1    Create sampling scheme
    QDP2    Change sampling scheme
    QDP3    Display sampling scheme
    QDR1    Create dynamic modification rule
    QDR2    Change dynamic modification rule
    QDR3    Display dynamic modification rule
    QDR6    Disp. where-used list-dyn. mod. rule
    QDR7    Replace dynamic mod. rule used
    QDV1    Create sampling procedure
    QDV2    Change sampling procedure
    QDV3    Display sampling procedure
    QDV6    Uses: Sampling procedures
    QDV7    Replace sampling procedure used
    QE00    Quality Planning
    QE01    Record characteristic results
    QE02    Change characteristic results
    QE03    Display characteristic results
    QE04    Record sample results
    QE05    Change sample results
    QE06    Display sample results
    QE09    Indiv.display of charac.result
    QE09WP  Call QE09 from Workplace
    QE11    Record results for inspection point
    QE12    Change results for inspection point
    QE13    Display results for inspection point
    QE14    Record results for delivery note
    QE15    Change results for delivery note
    QE16    Display results for delivery note
    QE17    Record results for equipment
    QE18    Change results for equipment
    QE19    Display results for equipment
    QE20    Record results for funct. location
    QE21    Change results for funct. location
    QE22    Display results for funct. location
    QE23    Record results for phys. sample
    QE24    Change results for phys. sample
    QE25    Display results for phys. sample
    QE29    No. Range Maint.: Conf. No. for Char
    QE51    Results recording worklist
    QE51N   Results Recording Worklist
    QE52    Worklist: Results for phys. sample
    QE53    Worklist: Record results for equip.
    QE54    Worklist: Results for funct. loctns
    QE71    Tabular res. recording for insp. pts
    QE72    Tabular Results Rec. for Insp. Lots
    QE73    Tabular res. recording for characs.
    QEH1    Worklist for Mobile Results Rec.
    QEI1    Displaying QM Interfaces Appl. Log
    QEI2    Deleting QM Interfaces Appl. Log
    QEW01   Results Recording on Web
    QEW01V  Variant Maint.: Recording on Web
    QF01    Record defect data
    QF02    Change defect data
    QF03    Display defect data
    QF11    Record defects for inspection lot
    QF21    Record defects for operation
    QF31    Record defects for characteristic
    QG09    Maint. num. range Q control charts
    QGA1    Display quality score time line
    QGA2    Display inspection results
    QGA3    Print inspection results
    QGC1    Qual. control charts for insp. lots
    QGC2    Control charts for task list charac.
    QGC3    Control charts for master insp. char
    QGD1    Test Equipment Usage List
    QGD2    Test Equipment Tracking
    QGP1    Results history for task list charac
    QGP2    Results History for Task List Charac
    QI01    Create quality info. - purchasing
    QI02    Change qual.information - purchasing
    QI03    Display quality info. - purchasing
    QI04    Job planning for QM procurement keys
    QI05    Mass maintenance QM procurement keys
    QI06    QM Releases: Mass maintenance
    QI07    Incoming insp. and open pur. orders
    QI08    Job overview of QM procurement keys
    QISR    Internal Service Request
    QISR1   Internal Service Request - Forms
    QISR_PCR60      vc_scenario for Message type 60(PCR)
    QISR_SM29       ISR Customizing: Table Transfer
    QISR_SR12_START Suggestion System
    QISRSCENARIO    Customizing Szenario
    QISRTRANSPORT   ISR Customizing Transport
    QISRW   Internal Service Request on the Web
    QK01    Assign QM order to material
    QK02    Display assigned QM orders
    QK03    Maintain specs. for order type
    QK04    Create QM order
    QK05    Confirmed activities for insp. lot
    QL11    Mat: Distribute Inspection Setup-ALE
    QL21    Master Inspection Characs (ALE)
    QL31    Distribute Inspection Methods (ALE)
    QL41    Distribute Code Groups (ALE)
    QM00    Quality Notifications
    QM01    Create quality notification
    QM02    Change quality notification
    QM03    Display quality notification
    QM10    Change list of quality notifications
    QM10WP  QM10 - Call from Workplace/MiniApp
    QM11    Display List of Qual. Notifications
    QM12    Change list of tasks
    QM13    Display list of tasks
    QM13WP  QM13 - Call from  Workplace/MiniApp
    QM14    Change list of items
    QM15    Display list of items
    QM16    Change activity list
    QM17    Display activity list
    QM19    List of Q Notifications, Multi-Level
    QM50    Time line display Q notifications
    QMW1    Create quality notification (WWW)
    QP01    Create
    QP02    Change
    QP03    Display
    QP05    Print inspection plan
    QP06    List: Missing/unusable insp. plans
    QP07    List: Missing/Unusable GR InspPlans
    QP08    Print task lists for material
    QP11    Create reference operation set
    QP12    Change reference operation set
    QP13    Display reference operation set
    QP48    Number Ranges for Physical Samples
    QP49    Number range for phys. samp. drawing
    QP60    Time-related development of plans
    QP61    Display change documents insp.plan
    QP62    Change documents ref.operation sets
    QPIQS8  QM MiniApp Selection Variant
    QPIQS9  QM MiniApp Selection Variant
    QPNQ    Number ranges for inspection plans
    QPQA32  QM MiniApp Selection Variant
    QPQGC1  QM MiniApp Selection Variant
    QPQM10  QM MiniApp Selection Variant
    QPQM13  QM MiniApp Selection Variant
    QPR1    Create physical sample
    QPR2    Change physical sample
    QPR3    Display physical sample
    QPR4    Confirm physical sample drawing
    QPR5    Manual inspection lots for physSamps
    QPR6    Create new phys.-samp. drawing w.ref
    QPR7    Storage Data Maintenance
    QPV2    Maintain sample drawing procedure
    QPV3    Display sample drawing procedure
    QS21    Create master insp. characteristic
    QS22    Create master insp. charac. version
    QS23    Change master insp. charac. version
    QS24    Display master insp. charac. version
    QS25    Delete master insp. charac. version
    QS26    Display characteristic use
    QS27    Replace master insp. characteristic
    QS28    Display insp. charac. list
    QS29    Maintain characteristic number range
    QS31    Create inspection method
    QS32    Create inspection method version
    QS33    Change inspection method version
    QS34    Display inspection method version
    QS35    Delete inspection method version
    QS36    Display inspection method use
    QS37    Central replacement of methods
    QS38    Display inspection method list
    QS39    Maintain method number range
    QS41    Maintain catalog
    QS42    Display catalog
    QS43    Maintain catalog
    QS44    Maintain catalog
    QS45    Display catalog
    QS46    Display code group use
    QS47    Central replacement of code groups
    QS48    Usage indicator - code groups
    QS49    Display code groups and codes
    QS4A    Display catalog
    QS51    Edit Selected Sets
    QS52    Display selected set index
    QS53    Maintain individual selected set
    QS54    Maintain selected set
    QS55    Display selected set
    QS58    Usage indicator - selected sets
    QS59    Display selected sets
    QS61    Maintain material specification
    QS62    Display material specification
    QS63    Maintain material spec: Planning
    QS64    Display material spec: For key date
    QS65    Activate material specification
    QS66    Plan activation of material spec.
    QS67    Job overview: Activate mat. spec.
    QSR5    Archive inspection plans
    QSR6    Delete routings
    QST01   Create Stability Study
    QST03   Display Stability History
    QST04   Display Inspection Plans
    QST05   Graphical Scheduling Overview
    QST06   Scheduling Overview (StabilityStudy)
    QST07   Change Testing Schedule Items
    QST08   Display Testing Schedule Items
    QSUB    Define subsystems
    QT00    Test Equipment Management
    QT01    Test equipment management
    QTSA    Product Allocations: Send Quantities
    QTSP    Product Allocations:Send Customizing
    QUERY_BP_FSBPBILDER     BP: Screen Customizing for Query
    QV01    Create quality assurance agreement
    QV02    Change quality assurance agreement
    QV03    Display quality assurance agreement
    QV04    Find Quality Assurance Agreement
    QV11    Create technical delivery terms
    QV12    Change technical delivery terms
    QV13    Display technical delivery terms
    QV14    Search technical terms of delivery
    QV21    Create QA agreement (DocType Q03)
    QV22    Change Q-agreement (doc. type Q03)
    QV23    Display Q-agreement (doc. type Q03)
    QV24    Find Q-agreement (doc. type Q03)
    QV31    Create Q-spec. (doc.type Q04)
    QV32    Change Q-specification (docType Q04)
    QV33    Displ. Q-specification (docType Q04)
    QV34    Find Q-specification (doc. type Q04)
    QV51    Create control for QM in SD
    QV52    Change control for QM in SD
    QV53    Display control for QM in SD
    QVM1    Inspection lots without completion
    QVM2    Inspection lots with open quantities
    QVM3    Lots without usage decision
    QZ00    Quality Certificates
    Hope this will help.
    Regards,
    Naveen.

  • List all functional equipment and show if SAP plan exists and next inspect'

    Used transcation IP19 - graphical scheduling overview. Unfortunately it appears to only show functional locations with SAP plans. I want an output that shows me all my current functional locations and if SAP plan exists and if possible when it is next due.
    Also tried IH06 and graphical overview, but think this is simmlpy another way of doing IP19.
    Because all electrical circuits for example should be inspected then i should have say 100 circuits with 100 sap plans. The only way to do it appears to be downloading to exel or access and comparing 2 tables? Thanks in advance.

    Hope this may help u
    http://www.sap-img.com/plant/sap-pm-questions-answers-on-functional-locations.htm
    Regards,
    Ravi

  • PP & QM config Tcodes

    hi SAP gurus.. can u send me the SAP PP and QM configuration Tcodes.
    nithya

    Dear Nithyaseelan,
    Please find list of PP & QM codes
    PP
    MATERIAL
    CREATE-GENERAL       MM01       IMMEDIETELY
                         MM11       SCHEDULE
    CHANGE               MM02       IMMEDIETELY
                         MM12       SCHEDULE
                         MM13       ACTIVATE
    FLAG FOR DELETION    MM06       IMMEDIETELY
                         MM16       SCHEDULE
    DISPLAY              MM03       DISPLAY CURRENT
                         MM19       DISPLAY AT KEY DATE
    DISPLAY CHANGES      MM04       ACTIVE CHANGES
                         MM14       SCHEDULE CHANGES
                         MM17       MASS MAINTENANCE
                         MMAM       CHANGE MATERIAL TYPE
    OTHER                MMBE       STOCK OVERVIEW
                         MMPV       CLOSE PERIOD
                         MMRV       ALLOW POSTING TO
                                    PREVIOUS PERIOD
                         MM50       INSTANT MATERIAL VIEW
                         MMSC       ENTER STORAGE LOCATIONS
                         MM60       MATERIAL LIST
    ARCHIVING(MATERIAL)  MM71       ARCHIVE/DELETE
                         MM72       DISPLAY ARCHIVE
    BILL OF MATERIAL (MATERIAL BOM)
                         CS01       CREATE
                         CS02       CHANGE
                         CS03       DISPLAY
    EXTRAS               CS28       ARCHIVING
                         CS20       MASS CHANGES
    EVALUATION/BOM       CS11       BOM MULTILEVEL
    EXPLOSION/MATERIAL   CS12       STRUCTURE MULTILEVEL
    BOM                  CS13       SUMMURISED BOM
    WORK CENTRES
                         CR01       CREATE
                         CR02       CHANGE
                         CR03       DISPLAY
                         CA85       REPLACE
    CAPACITY             CR11       CREATE
                         CR12       CHANGE
                         CR13       DISPLAY
    HIERARCHY            CR21       CREATE
                         CR22       CHANGE
                         CR23       DISPLAY
    LINE HIERARCHY       LDB1       CREATE
                         LDB2       CHANGE
                         LDB3       DISPLAY
    REPORTING            CR60       W/C INFORMATION SYSTEM
                         CR05       W/C LIST
                         CR06       COST CENTRE ASSIGNMENT
                         CR07       W/C CAPACITIES
                         CR08       W/C HIERARCHY
    WHERE USED           CA80       WORK CENTRE
                         CR15       CAPACITY
                         CR10       CHANGE DOCUMENTS
    EXTRAS               CR09       STD. TEXTS TASK LIST
                         CR41       ARCHIVING
    ROUTING
    STAD. ROUTING        CA01       CREATE
                         CA02       CHANGE
                         CA03       DISPLAY
    REF. OPERATION SETS  CA11       CREATE
                         CA12       CHANGE
                         CA13       DISPLAY
    RATE ROUTING         CA21       CREATE
                         CA22       CHANGE
                         CA23       DISPLAY
    REF. RATE ROUTING    CA31       CREATE
                         CA32       CHANGE
                         CA33       DISPLAY
    EXTRAS               CA85       REPLACE W/C
    MASS CHANGES         CA95       REPLACE REF. OP. SET
                         CA75       REPLACE PRT
    DELETE TASK LIST     CA99       WITH ARCHIVING
                         CA98       W/O ARCHIVING
    REPORTING            CA80       WORK CENTRE
    WHERE USED LIST      CA90       REF. OP. SETS
                         CA70       PRODUCTION RESORCE TOOLS
    COST CENTRE
                         OKKP       MAINTAIN CONTROLLING AREA
                         KS01       CREATE COST CENTRE
                         KZS2       CREATE COSTING SHEET
                         KA01       CREATE PRI. COST ELEMENT
                         KA06       CREATE SEC. COST ELEMENT
                         KL01       CREATE ACTIVITY TYPE
                         KP26       ACTIVITY TYPE/PRICE PLANNING
    SALES AND OPERATIONS PLANNING
    PRODUCT GROUP        MC84       CREATE
                         MC86       CHANGE
                         MC85       DISPLAY
    GRAPHIC              MC91       PRODUCT GROUP
                         MC92       OVERVIEW
    PLANNING             MC81       CREATE
    FOR PRODUCT GROUP    MC82       CHANGE
                         MC83       DISPLAY
                         MC75       TRANSFER PG TO PLANNING
    FOR MATERIAL         MC87       CREATE
                         MC88       CHANGE
                         MC89       DISPLAY
                         MC74       TRANSFER MATERIALS TO DM
                         MC9K       MATERIAL AVAILABILITY
    VERSION MANAGEMENT   MC78       COPY
                         MC80       DELETE
    FLEXIBLE PLANNING    MC93       CREATE
    PLANNING             MC94       CHANGE
                         MC95       DISPLAY
                         MC9K       MATERIAL AVAILABILITY
    TOOLS/PLANNING TYPE  MC8A       CREATE
    MACRO                MC8B       CHANGE
                         MC8C       DISPLAY
    EVENT                MC64       CREATE
                         MC65       CHANGE
                         MC66       DISPLAY
    ROUGH CUT PLANNING   MC35       CREATE
    PROFILE              MC36       CHANGE
                         MC37       DISPLAY
    ENVIRONMENT          MC90       TRANSFER MATERIALS TO DM
    ACTIVITY REQT.       KSPP       TRANSFER TO COST CENTRE
                         KSBL       COST CENTRE OLANNING REPORT
                         KSOP       TRANSFER TO ACTIVITY BASED COSTING
                         CPBL       PLANNING REPORT PROCESSES
                         MC9C       REPORTING
    SETTINGS             MC96       FORECAST PROFILE
    DISSAGGRIGATION      MC76       BREAKDOWN PG PLAN
                         MC77       DISPLAY PG PLAN
                         MC75       TRANSFER PG TO PLANNING
                         MC74       TRANSFER MATERIALS TO DM
    FORECASTING
    INDIVIDUAL FORECAST  MP30       EXECUTE
                         MP31       CHANGE
                         MP32       DISPLAY
    TOTAL FORECAST       MP38       EXECUTE
                         MP33       REPROCESS
                         MP39       PRINT
                         MPBT       EXECUTE BACKGROUND
                         MPDR       PRINT BACKGROUND
    DEMAND MANAGEMENT
    PIR                  MD61       CREATE
                         MD62       CHANGE
                         MD63       DISPLAY
                         MD65       REQTS. FOR SCINARIO
                         MD66       COPY SIMULATED DEPENDENT REQT.
                         MD70       COPY TOTAL FORE CAST
    EVALUATION           MD73       DISPLAY TOTAL REQT.
                         MD79       EXCELL INTERFACE
                         MD4C       ORDER REPORT
                         MD72       CHARECTERISTICS PLANNING
    CUSTOMER REQT.       MD81       CREATE
                         MD82       CHANGE
                         MD83       DISPLAY
    REPETITIVE MANUFACTURING
    MASTER DATA          C223       PRODUCTION VERTION
    PRODUCT COST PLANNING
    COSTING RUN          CKMATSEL   CREATE
    SELECTION LIST       CKMATCON   Edit
                         CK40N      EDIT COSTING RUN
    Material Requirement Planning
    Menu Nodes           TransactionActivity
    Master Data          MD25       Create planning calendar
                         MD26       Change planning calendar
                         MD27       Display planning calendar
                         MDSA       Display BOM explosion number
                         MDSP       Edit BOM explosion number
                         MEQ1       Maintain quota file
                         OPPP       Explode BOM by date
                         MDUS       Display project assignment
                         MDUP       Process project assignment
                         MDL1       Create production lot
                         MDL2       Change production lot
                         MDL3       Display production lot
    Planning             MD20       Create planning file entry
                         MD21       Display planning file entry
                         MDAB       Set up planning file entry in background
                         MDRE       Check planning file entry
                         MD01       Total planning online
                         MDBT       Total planning in background
                         MD03       Single-item, single-level planning
                         MD02       Single-item, multi-level planning
                         MD43       Interactive single-item planning
                         MD50       Multi-level, make-to-order planning
                         MD51       Multi-level project planning
                         MF52       Display planning table
                         MF50       Change planning table
                         MF57       Planning table by MRP lists
                         MF51       Planning table by production list
    Evaluations          MD04       Stock/requirements list
                         MD07       Collective access of stock/requirements lis
                         MD05       MRP list
                         MD06       Collective access of MRP lists
                         MDLD       Print MRP list
                         MD45       Planning result
                         MD46       Collective access of planning result
                         MD44       Planning situation for a material
                         MD47       Planning situation for a product group
                         MD48       Cross-plant planning situation
                         MD4C       Order report
                         MD09       Pegged requirements
                         CO46       Order progress
    Planned Order        MD11       Create planned order
                         MD12       Change planned order
                         MD13       Individual access of planned order
                         MD16       Collective access of planned orders
                         MD14       Individual conversion of planned order into
                         MD15       Collective conversion of planned orders int
                         MDUM       Convert planned order into purchase requisi
                         CO40       Convert individual planned order into produ
                         CO41       Collective conversion of planned orders int
                         CO48       Partial conversion of planned order into pr
                         COR7       Individual conversion of planned order into
                         COR7_PC    Collective conversion of planned orders int
                         COR8       Partial conversion of planned order into pr
                         MDVP       Collective availability check
                         MDAC       Execute action for planned order
    LONG TERM PLANNING
    PALNNING SCENARIO    MS31       CREATE
                         MS32       CHANGE
                         MS33       DISPLAY
    PLANNING RUN         MS01       ON LINE
                         MSBT       SA BACKGROUND JOB
                         MS02       SINGLE ITEM - MULTI LEVEL
                         MS03       SINGLE ITEM - SINGLE LEVEL
                         MS50       SINGLE ITEM - SALES ORDER
                         MS51       SINGLE ITEM PLANNING, PROJECT
                         MFSO       PLANNING TABLE
    EVALUTIONS           MS05       MRP LIST MATERIAL
                         MS06       MRP LIST COLLECTIVE DISPLAY
                         MSLD       PRINT MRP LIST
                         MS04       STOCK/REQUIREMENTS LIST
                         MS07       STOCK/REQUIREMENT LIST COLLECTIVE DISPLAY
                         MS44       PLANNING SITUATION MATERIAL
                         MS47       SITUATION PRODUCT GROUP
    MPS-MASTER SCHEDULE ITEMS
    TOTAL PLANNING       MD40       ON LINE
                         MDBS       SA BACKGROUND JOB
                         MD41       SINGLE ITEM - MULTI LEVEL
                         MD42       SINGLE ITEM - SINGLE LEVEL
                         MD43       SINGLE ITEM - INTERACTIVE
                         MD50       SINGLE ITEM - SALES ORDER
                         MD51       SINGLE ITEM PLANNING, PROJECT
    EVALUTION IS SIMILAR TO MRP
    PRODUCTION CONTROL
    ORDER - CREATE       CO01       WITH MATERIAL
                         CO07       WITHOUT MATERIAL
                         CO40       FROM PLANNED ORDER
                         CO41       COLLECTIVE CONVERTION OF PLANNED ORDER
                         CO08       FOR SALES ORDER
                         CO10       FOR PROJECT
                         CO02       CHANGE
                         CO03       DISPLAY
    CONTROL              MD04       STOCK/REQUIREMENTS LIST
                         COHV       MASS PROCESSING
                         COMAC      COLLECTIVE AVAILABILITY CHECK
                         CO05N      COLLECTIVE RELEASE
                         CO04N      PRINT
                         CO09       AVAILABILITY OVER VIEW
    GOODS MOVEMENT       MF65       STOCK TRANSFER FOR RESERVATION
    MATERIAL STAGING     MF68       LOG
                         MB1A       GOODS ISSUE
                         MB31       GOODS RECEIPT
                         COWBPACK   PACK MATERIAL
    CONFIRMATION         CO1V       TIME TICKET
    FOR OPERATION        CO14       DISPLAY
                         CO13       CANCEL
                         CO1L       REQUESTED CONFIRMATIONS
                         CO1P       PREDEFINED PROCESSES
    TOOLS-ARCHIVING      CO78       ORDER
                         KOAA       SETTELMENT DOCUMENTS
    CAPACITY PLANNING
    EVALUTION            CM01       LOAD
    WORK CENTER VIEW     CM02       ORDERS
                         CM03       POOL
                         CM04       BACKLOG
                         CM05       OVERLOAD
                         CM07       VARIABLE
    EXTENDED EVALUTION   CM50       WORK CENTER VIEW
                         CM51       INDIVIDUAL CAPACITY VIEW
                         CM52       ORDER VIEW
    LEVELLING            CM21       PLANNING TABLE (GRAPHICAL)
    WORK CENTER VIEW     CM22       PLANNING TABLE (TABULAR)
    INDIVIDUAL CAPACITY VCM27       PLANNING TABLE (GRAPHICAL)
                         CM28       PLANNING TABLE (TABULAR)
    ORDER VIEW           CM31       PLANNING TABLE (GRAPHICAL)
                         CM32       PLANNING TABLE (TABULAR)
    AVAILABLE CAPACITY   CR12       CHANGE
    CAPACITY             CR13       DISPLAY
                         OP4A       SHIFT SEQUENCE
                         OP43       FACTORY CALENDER
    <b>QM</b>
    Q000    Quality management
    QA00    Quality inspection
    QA01    Create Inspection Lot
    QA01A   Create Inspection Lot
    QA02    Change Inspection Lot
    QA02A   Change Inspection Lot
    QA03    Display inspection lot
    QA05    Job planning: Periodic inspection
    QA06    Job overview: Periodic inspection
    QA07    Trigger for recurring inspection
    QA07L   Deadline Monitoring Log
    QA08    Collective Processing of Insp. Setup
    QA09    No. range maintenance for insp.lots
    QA10    Trigger automatic usage decision
    QA10L   Log for Automatic Usage Decision
    QA11    Record usage decision
    QA12    Change usage decision with history
    QA13    Display usage decision
    QA14    Change UD without history
    QA16    Collective UD for accepted lots
    QA17    Job planning for auto usage decision
    QA18    Job overview for auto usage decision
    QA19    Automatic usage decision
    QA22    Change inspection point quantities
    QA23    Display insp.point quantities
    QA32    Change data for inspection lot
    QA32WP  QA32 -Call from Workplace/MiniApp
    QA33    Display data for inspection lot
    QA40    Auto. Usage Decision for Production
    QA40L   Log for Automatic Usage Decision
    QA41    Scheduling UD for Production Lots
    QA42    Job planning: UD prod. insp.lots
    QA51    Scheduling Source Inspections
    QA52    Source inspections: Job overview
    QAC1    Change insp. lot actual quantity
    QAC2    Transfer stock to insp. lot
    QAC3    Reset sample
    QAER    Display archive objects
    QAS1    Download Insp. Specs. (Obsolete)
    QAS2    Download Basic Data (Obsolete)
    QAS3    Upload Results (Obsolete)
    QAS4    Upload UD (Obsolete)
    QC01    Create certificate profile
    QC02    Change certificate profile
    QC03    Display certificate profile
    QC06    Immediate delete of cert. profiles
    QC11    Create cert. profile assignment
    QC12    Change cert. profile assignment
    QC13    Display cert. profile assignment
    QC14    Create cert.prof.assign.w/copy model
    QC15    Create cert. profile assignment
    QC16    Change cert. profile assignment
    QC17    Display cert. profile assignment
    QC18    Create cert.prof.assign.w/copy model
    QC20    Certificates for Deliveries
    QC21    Quality certificate for the insp.lot
    QC22    Quality Certificate for Batch
    QC31    Archive display: Delivery item
    QC32    Archive display: Inspection lot
    QC40    Internet Certificate for Delivery
    QC40A   Internet Certificate for Delivery
    QC42    Batch certificate on WWW
    QC51    Create certificate in procurement
    QC52    Change certificate in procurement
    QC53    Display certificate in procurement
    QC55    Worklist: Certificates - Procurement
    QCC0    QM: Direct Access to IMG
    QCC1    Direct Access to IMG: Notification
    QCC2    IMG Direct Access: QM Q-Notification
    QCC3    IMG Direct Access: QM Q-Inspection
    QCC4    IMG Direct Access: QM Q-Planning
    QCC5    IMG Direct Selection: QM Bus. Add-In
    QCC_STABI       Copy Stability Study Customizing
    QCC_STABI_NK    Copy Stability Study Number Ranges
    QCCC    QM standard settings complete
    QCCF    QM standard forms
    QCCK    QM standard settings: Catalogs
    QCCM    QM std. settings: Qual. notifs.
    QCCN    QM standard number ranges
    QCCP    QM std. settings: Quality planning
    QCCS    QM sampling schemes
    QCCT    QM standard texts
    QCCU    QM standard settings: Environment
    QCCW    QM std. settings: Quality inspection
    QCCY    Transport QM tolerance key
    QCCZ    QM std. settings: Qual. certificates
    QCE2    Edit Communication Support
    QCE3    Display Communication Support
    QCYF    QM standard forms (general)
    QCYT    QM standard texts (general)
    QD21    Mark completed notifications
    QD22    Archiving Notifications: Archive
    QD24    Archiving Notifications: Delete
    QD25    Archiving Notifications: Admin.
    QD33    Delete quality level
    QD34    Delete quality level planning
    QD35    Delete job overview for Q-levels
    QDA1    Edit sampling type
    QDA3    Display sampling type
    QDB1    Maintain allowed relationships
    QDB3    Display allowed relationships
    QDH1    Q-level evaluation: Change data
    QDH2    Q-level evaluation: Display data
    QDL1    Create quality level
    QDL2    Change quality level
    QDL3    Display quality level
    QDM1    Edit valuation mode
    QDM3    Display valuation mode
    QDP1    Create sampling scheme
    QDP2    Change sampling scheme
    QDP3    Display sampling scheme
    QDR1    Create dynamic modification rule
    QDR2    Change dynamic modification rule
    QDR3    Display dynamic modification rule
    QDR6    Disp. where-used list-dyn. mod. rule
    QDR7    Replace dynamic mod. rule used
    QDV1    Create sampling procedure
    QDV2    Change sampling procedure
    QDV3    Display sampling procedure
    QDV6    Uses: Sampling procedures
    QDV7    Replace sampling procedure used
    QE00    Quality Planning
    QE01    Record characteristic results
    QE02    Change characteristic results
    QE03    Display characteristic results
    QE04    Record sample results
    QE05    Change sample results
    QE06    Display sample results
    QE09    Indiv.display of charac.result
    QE09WP  Call QE09 from Workplace
    QE11    Record results for inspection point
    QE12    Change results for inspection point
    QE13    Display results for inspection point
    QE14    Record results for delivery note
    QE15    Change results for delivery note
    QE16    Display results for delivery note
    QE17    Record results for equipment
    QE18    Change results for equipment
    QE19    Display results for equipment
    QE20    Record results for funct. location
    QE21    Change results for funct. location
    QE22    Display results for funct. location
    QE23    Record results for phys. sample
    QE24    Change results for phys. sample
    QE25    Display results for phys. sample
    QE29    No. Range Maint.: Conf. No. for Char
    QE51    Results recording worklist
    QE51N   Results Recording Worklist
    QE52    Worklist: Results for phys. sample
    QE53    Worklist: Record results for equip.
    QE54    Worklist: Results for funct. loctns
    QE71    Tabular res. recording for insp. pts
    QE72    Tabular Results Rec. for Insp. Lots
    QE73    Tabular res. recording for characs.
    QEH1    Worklist for Mobile Results Rec.
    QEI1    Displaying QM Interfaces Appl. Log
    QEI2    Deleting QM Interfaces Appl. Log
    QEW01   Results Recording on Web
    QEW01V  Variant Maint.: Recording on Web
    QF01    Record defect data
    QF02    Change defect data
    QF03    Display defect data
    QF11    Record defects for inspection lot
    QF21    Record defects for operation
    QF31    Record defects for characteristic
    QG09    Maint. num. range Q control charts
    QGA1    Display quality score time line
    QGA2    Display inspection results
    QGA3    Print inspection results
    QGC1    Qual. control charts for insp. lots
    QGC2    Control charts for task list charac.
    QGC3    Control charts for master insp. char
    QGD1    Test Equipment Usage List
    QGD2    Test Equipment Tracking
    QGP1    Results history for task list charac
    QGP2    Results History for Task List Charac
    QI01    Create quality info. - purchasing
    QI02    Change qual.information - purchasing
    QI03    Display quality info. - purchasing
    QI04    Job planning for QM procurement keys
    QI05    Mass maintenance QM procurement keys
    QI06    QM Releases: Mass maintenance
    QI07    Incoming insp. and open pur. orders
    QI08    Job overview of QM procurement keys
    QISR    Internal Service Request
    QISR1   Internal Service Request - Forms
    QISR_PCR60      vc_scenario for Message type 60(PCR)
    QISR_SM29       ISR Customizing: Table Transfer
    QISR_SR12_START Suggestion System
    QISRSCENARIO    Customizing Szenario
    QISRTRANSPORT   ISR Customizing Transport
    QISRW   Internal Service Request on the Web
    QK01    Assign QM order to material
    QK02    Display assigned QM orders
    QK03    Maintain specs. for order type
    QK04    Create QM order
    QK05    Confirmed activities for insp. lot
    QL11    Mat: Distribute Inspection Setup-ALE
    QL21    Master Inspection Characs (ALE)
    QL31    Distribute Inspection Methods (ALE)
    QL41    Distribute Code Groups (ALE)
    QM00    Quality Notifications
    QM01    Create quality notification
    QM02    Change quality notification
    QM03    Display quality notification
    QM10    Change list of quality notifications
    QM10WP  QM10 - Call from Workplace/MiniApp
    QM11    Display List of Qual. Notifications
    QM12    Change list of tasks
    QM13    Display list of tasks
    QM13WP  QM13 - Call from  Workplace/MiniApp
    QM14    Change list of items
    QM15    Display list of items
    QM16    Change activity list
    QM17    Display activity list
    QM19    List of Q Notifications, Multi-Level
    QM50    Time line display Q notifications
    QMW1    Create quality notification (WWW)
    QP01    Create
    QP02    Change
    QP03    Display
    QP05    Print inspection plan
    QP06    List: Missing/unusable insp. plans
    QP07    List: Missing/Unusable GR InspPlans
    QP08    Print task lists for material
    QP11    Create reference operation set
    QP12    Change reference operation set
    QP13    Display reference operation set
    QP48    Number Ranges for Physical Samples
    QP49    Number range for phys. samp. drawing
    QP60    Time-related development of plans
    QP61    Display change documents insp.plan
    QP62    Change documents ref.operation sets
    QPIQS8  QM MiniApp Selection Variant
    QPIQS9  QM MiniApp Selection Variant
    QPNQ    Number ranges for inspection plans
    QPQA32  QM MiniApp Selection Variant
    QPQGC1  QM MiniApp Selection Variant
    QPQM10  QM MiniApp Selection Variant
    QPQM13  QM MiniApp Selection Variant
    QPR1    Create physical sample
    QPR2    Change physical sample
    QPR3    Display physical sample
    QPR4    Confirm physical sample drawing
    QPR5    Manual inspection lots for physSamps
    QPR6    Create new phys.-samp. drawing w.ref
    QPR7    Storage Data Maintenance
    QPV2    Maintain sample drawing procedure
    QPV3    Display sample drawing procedure
    QS21    Create master insp. characteristic
    QS22    Create master insp. charac. version
    QS23    Change master insp. charac. version
    QS24    Display master insp. charac. version
    QS25    Delete master insp. charac. version
    QS26    Display characteristic use
    QS27    Replace master insp. characteristic
    QS28    Display insp. charac. list
    QS29    Maintain characteristic number range
    QS31    Create inspection method
    QS32    Create inspection method version
    QS33    Change inspection method version
    QS34    Display inspection method version
    QS35    Delete inspection method version
    QS36    Display inspection method use
    QS37    Central replacement of methods
    QS38    Display inspection method list
    QS39    Maintain method number range
    QS41    Maintain catalog
    QS42    Display catalog
    QS43    Maintain catalog
    QS44    Maintain catalog
    QS45    Display catalog
    QS46    Display code group use
    QS47    Central replacement of code groups
    QS48    Usage indicator - code groups
    QS49    Display code groups and codes
    QS4A    Display catalog
    QS51    Edit Selected Sets
    QS52    Display selected set index
    QS53    Maintain individual selected set
    QS54    Maintain selected set
    QS55    Display selected set
    QS58    Usage indicator - selected sets
    QS59    Display selected sets
    QS61    Maintain material specification
    QS62    Display material specification
    QS63    Maintain material spec: Planning
    QS64    Display material spec: For key date
    QS65    Activate material specification
    QS66    Plan activation of material spec.
    QS67    Job overview: Activate mat. spec.
    QSR5    Archive inspection plans
    QSR6    Delete routings
    QST01   Create Stability Study
    QST03   Display Stability History
    QST04   Display Inspection Plans
    QST05   Graphical Scheduling Overview
    QST06   Scheduling Overview (StabilityStudy)
    QST07   Change Testing Schedule Items
    QST08   Display Testing Schedule Items
    QSUB    Define subsystems
    QT00    Test Equipment Management
    QT01    Test equipment management
    QTSA    Product Allocations: Send Quantities
    QTSP    Product Allocations:Send Customizing
    QUERY_BP_FSBPBILDER     BP: Screen Customizing for Query
    QV01    Create quality assurance agreement
    QV02    Change quality assurance agreement
    QV03    Display quality assurance agreement
    QV04    Find Quality Assurance Agreement
    QV11    Create technical delivery terms
    QV12    Change technical delivery terms
    QV13    Display technical delivery terms
    QV14    Search technical terms of delivery
    QV21    Create QA agreement (DocType Q03)
    QV22    Change Q-agreement (doc. type Q03)
    QV23    Display Q-agreement (doc. type Q03)
    QV24    Find Q-agreement (doc. type Q03)
    QV31    Create Q-spec. (doc.type Q04)
    QV32    Change Q-specification (docType Q04)
    QV33    Displ. Q-specification (docType Q04)
    QV34    Find Q-specification (doc. type Q04)
    QV51    Create control for QM in SD
    QV52    Change control for QM in SD
    QV53    Display control for QM in SD
    QVM1    Inspection lots without completion
    QVM2    Inspection lots with open quantities
    QVM3    Lots without usage decision
    QZ00    Quality Certificates
    If usefule , please reward points.

  • Operation wise Production Scheduling Graphical Report

    Dear Expert ,
    I have multiple production orders and each operations have schedule start date and finsihe date .My client wants a graphical bar chart or grarate chart of production oreds , operations schedule  based on  vaious work centers after doing capacity leveling in CM21 graphical view  so that every week we can production manager can send the concern people those production schedule to SFC.
    Is there any functionality or SAP reporting tools are available in this requirement ? I have tried in CM21 --print - chart2 which is giving me order pool before operation despatch ..I am not able to get the same chart2 after order-operation  dispatch .
    Regard
    JH

    Hi ,
    I did not able to find out anY sap standard report of this requirement .
    How ever , I have developed an functional specification to make  a custom report based on COOIS and CM21.User will  carry out  work centre , operation and production order wise   scheduling(Operation dispatch , overload checking and scheduling )  in CM21  and same will be captured in custom developed report based on COOIS.This can have an graphical chat in PDF or excell as per business requirement  to send the concern production department as reference .
    As there is  client policy of data protection  , I am not able to share details  about this report .
    Regards
    JH

  • How to perform Graphical Time Scheduling in audit management application?

    I am not able to perform Graphical Time Scheduling in audit management application.
    The pre requisite i have done are:
    1. Install SAPGUI Component CRM-ADDON using SAP Front End Installer on my PC locally.
    2. Install MS Project 2007 on my PC locally.
    when i press Graphical Time Schedulling button or Press F7 key MS Project application opens but without any values. How can i see plan actual time comparison from Audit management application to MS project???
    Regards

    waiting for the reply...

  • Job scheduled, flow diag.s, dependencies in Graphical & Spreadsheet format

    Would you please let me know if the CPS (Redwood) provides the list of all the jobs scheduled or to be executed, their flow diagrams and dependencies, both graphically as well as in a spreadsheet format, which can be exported out to a file or can be printed? If it is possible, how this can be done?

    Hi Ashish,
    The flows that have been built can be displayed using the "Show diagram" option (right click on job of flow, or on a job chain definition).
    Tabular reports can be generated under the "Reports" option under Definitions.
    Regards,
    Anton.

  • MRS (Multi Resource Scheduling) - Show operation status in Planning Board

    Because the current MRS thread is some long and complicated I chose to move this question into a seperate thread:
    Initial question:
    Like many companies, it is not unusual at my customer for their Planners to create orders with multiple operations, particularly since many orders require different crafts to perform the work. When the Planning Board is launched and Planners lok at work scheduled for the past week they want to be able to see at a glance which operations have been completed and which operations, perhaps from the same order, have not and may need to be rescheduled. Their preference is to select "final confirmation" when using transaction IW41 and thereby set the operation system status to CNF when the work on an operation has been completed. They then want to somehow use this CNF operation status to drive something visual in the graphical Demand layout display and Resource layout display to enable the Planner to see at a glance that the operation has been completed. I've tried several approaches with configuration of abstract statuses and the user interface profile without success. My customer's interest in being able to see the completion status of an operation in the MRS Planning Board makes a lot of sense to me. I'm hoping someone can help me with a technique for modifying the Planning Board so that it displays the completion status of an operation in a visual way.
    Response from Varun Verma:
    Hi Mark,
    The problem at your customers end is nothing new.
    What you can do ( many other customers have done it in similar way ) is:
    1) you integrate the status CNF into MRS.
    Check the customizing: Basic Settings -> Assign ERP Objects -> Status
    2) configure in MRS that for status CNF, the assignments and demands (only in item work list or Hotlist) is colored to GREEN (or any other color)
    Check customizing: Set Up Scheduler Workplace -> Workplace Profiles -> Define User Interface Profiles
    Thus the users will know visually, that the green colored assignments are already completed.
    By the way, in your work list you can also filter the demands based on their status
    Regards
    Varun.
    Followup question:
    Varun,
    Thanks for the response.  I thought I had tried this but perhaps it's because in the UI profile I had not entered something in both the status groups for assignments and the status groups for demands.  I have a bit more testing to do but it appears that the demand status now gets updated from the operation status of PCNF (linked to abstract status WORK_START) and CNF (linked to abstract status WORK_STOP).  I also get a red bar (C4) for PCNF and a green bar (C1) for CNF.  Do you have a better status group I should be using in place of C1 and C4?  Status groups C1 and C4 give me a bar but it doesn't look like the demand bar with a outline and alphanumeric description of the demand, it's just a colored bar.
    I know the work list can be filtered based on their MRS "planning" status, however, it doesn't appear to permit filtering by the status of the operation unless I add the operation status as an additional field in the worklist.  Is there something I'm missing here?  And even if it did, my customer wants to be able to see the CNF status indication in the Demand layout and schedule using the work centers so the worklist is not being shown like it is in the Resource layout.
    Mark
    Edited by: Mark Scott on Aug 10, 2009 3:35 PM

    Hi Mark,
    Well I assumed that you have confirmations integration active !! But I guess not because you say that the status is not integrated always.
    What you need to do:
    1) I assume you have SP05 or later.
    2) Implement the user exit: CONFPM05. In the implementation of this exit you need to call FM: /MRSS/RSG_PM_ORDER_CONFIRM
    3) Go to customizing: Basic Settings --> Assign ERP Objects --> Status
      -- Here, define an abstract status (MRS Status) for confirmed and partially confirmed
      -- map it to R3 status CNF and PCNF.
    After this, whenever you enter confirmation for PM order from transaction IW41, the status will be integrated.
    Now you can use the MRS statuses defined in step 3 to configure the colors.
    Implementing the user exit CONFPM05 might require some technical input. But it is easy. Just a few double clicks and copy paste.
    Contact an ABAP developer for the same.
    This should solve your issue.
    Regards
    Varun

  • Getting error while updating a scheduler.

    com.sunopsis.core.l: Cannot update scheduling - This agent is not a scheduler
         at com.sunopsis.dwg.dbobj.SnpAgent.computePlanning(SnpAgent.java)
         at com.sunopsis.graphical.frame.b.jg.j(jg.java)
         at com.sunopsis.graphical.frame.b.jg.g(jg.java)
         at com.sunopsis.graphical.frame.b.cr.actionPerformed(cr.java)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    i m getting this error..
    can someone guide me on this?

    Well Friend we schedule the scenarios always no matter whether its package or procedure.
    Have a look at this link - http://odiexperts.com/?p=1043 .hope this helps.
    just a remind of step considering your server is unix
    update odiparams.sh
    start agent.sh
    Create Physical , Logical Agent .
    Test physical
    Once done
    start the agent again in a terminal ,and put it in background process
    - sh agentscheduler.sh -name=<agent_name> -port=<port_no> &
    when you are saying you are not able to schedule ,can you trigger the interfaces .check for that . ?

  • HP Expert Days: What is it and Schedule of Events

    Schedule of Expert Day Events
    What is HP Expert Day?
    Expert Day is an event when HP product team members and other employees join our online HP Support Forums to answer your toughest technical questions, even for products that are out of warranty. Expert Days give you a chance to talk directly with the people who designed and made the HP products you’re using, or who wrote the manuals for them.
    This event has been called the “Super Bowl” of expert assistance, providing you with a day of free access to a wealth of internal and external technical experts.  We always have employee Experts (signified by the HP label) on the forums, but on Expert Day, employee Experts  are joined by many other HP employees to help get your problems resolved.
    The HP Expert Day events take place in several languages around the world and typically last 8-24 hours. 
    Why should you come to Expert Day?
    Whether you own a Photosmart printer, HP Envy notebook or an HP home desktop computer, there has never been a better chance to learn about your product.
    When do you have a chance to talk directly with the people who designed the product or wrote the manual for it?
    This is your chance to connect with the best and brightest minds at HP for free.
    We’ll share our knowledge on the best ways to:
    Troubleshoot the issue you are having;
    Set up a Wireless network;
    Tweak your product to increase performance;
    Safeguard your PC from viruses and spyware;
    Choose the right video card, power supply, or add the right amount of memory;
    Use the tools built into your product that can make it run better and fix common problems.
    It doesn’t matter how old the product is or what it is connected to. We will do our best to help.
    And, best of all, it’s FREE.
    How do Expert Day events work?
    Come to the Forum and post your questions. More than 150 experts will be on the Boards and will do their best to answer your questions. They may need to get some more information from you so please check the box "email me when someone replies."  An online conversation will be born!
    If you need assistance using the forum, there are tips and tricks here and helpful support videos here. 
    See below for details on all of the upcoming HP Expert Day events.
    +++++++++++++++++++++++++++++++++++
    Upcoming Expert Day Events: 
    Expert Day in English (Consumer) - May 20-21, 2015
    Expert Day in English (Enterprise Business) - May, 2015 
    Expert Day in French - May, 2015 
    Expert Day in German - May, 2015 
    Expert Day in Portuguese - May, 2015 
    Expert Day in Spanish - May, 2015 
    Expert Day in S. Chinese - May, 2015 
    Past Expert Day Events:
    Expert Day in English (Consumer) - January 14, 2015
    Expert Day in English (Enterprise Business) - January 14, 2015
    Expert Day in Korean - January 15, 2015
    Expert Day in Simplified Chinese - January 15, 2015  
    Expert Day in English (Consumer) - August 27-28, 2014 
    Expert Day in English (Enterprise Business) - August 27-28, 2014
    Expert Day in French - August 27, 2014 
    Expert Day in German - August 27, 2014 
    Expert Day in Portuguese - August 27, 2014
    Expert Day in Spanish - August 27, 2014
    Expert Day in Korean - August 28, 2014 
    Expert Day in S. Chinese - August 28, 2014 
    Expert Day in English (Consumer) - May 14-15 2014
    Expert Day in English (Enterprise Business) - May 14 2014
    Expert Day in French - May 14 2014
    Expert Day in German - May 14 2014
    Expert Day in Korean - May 15 2014
    Expert Day in Simplified Chinese - May 15 2014
    Expert Day in English (Consumer) - January 15-16, 2014
    Expert Day in English (Enterprise Business) - January 15-16, 2014
    Expert Day in Korean - January 16, 2014
    Expert Day in Simplified Chinese - January 16, 2014
    Windows 8.1 Expert Day in English (Consumer) - December 5, 2013
    MacOS Expert Day in English (Consumer) - November 6, 2013
    Expert Day in English (Consumer) - September 10-11, 2013
    Expert Day in English (Enterprise Business) - September 10-11, 2013
    Expert Day in Korean - September 11, 2013
    Expert Day in Simplified Chinese - September 11, 2013
    Expert Day in French - September 18, 2013
    Expert Day in German - September 18, 2013
    Expert Day in Portuguese - September 18, 2013
    Expert Day in Spanish - September 18, 2013
    Expert Day in English (Consumer) - May 8-9, 2013
    Expert Day in English (Enterprise Business) - May 8-9, 2013
    Expert Day in French - May 8, 2013
    Expert Day in German - May 8, 2013
    Expert Day in Korean - May 9, 2013
    Expert Day in Portuguese - May 8, 2013
    Expert Day in Simplified Chinese - May 9, 2013
    Expert Day in Spanish - May 8, 2013
    Expert Day in English (Consumer) - January 9-10, 2013
    Expert Day in English (Enterprise Business) - January 9-10, 2013
    Windows 8 Expert Day in English (Consumer) - November 28, 2012
    Windows 8 Expert Day in English (Enterprise Business) - November 28, 2012> 
    Expert Day in French - November 7, 2012
    Expert Day in German - November 7, 2012
    Expert Day in English (Consumer) - September 20-21, 2012
    Expert Day in English (Enterprise Business) - September 20-21, 2012
    Expert Day in Korean - September 20, 2012
    Expert Day in Simplified Chinese - September 20, 2012
    Expert Day in Portuguese - September 5, 2012
    Expert Day in Spanish - September 5, 2012
    MacOS Expert Day in English (Consumer) - August 15, 2102
    Expert Day in English (Consumer) - April 18-19, 2012
    Expert Day in English (Enterprise Business) - April 18-19, 2012
    Expert Day in French (Consumer) - April 18, 2012
    Expert Day in German (Consumer) - April 18, 2012
    Expert Day in Portuguese (Consumer) - April 18, 2012
    Expert Day in Spanish (Consumer) - April 18, 2012
    Expert Day on January 11-12, 2012, in English (Consumer)
    Expert Day on January 11-12, 2012, in English (Enterprise Business)
    Expert Day on January 12, 2012, in Korean
    Expert Day on January 12, 2012, in Simplified Chinese
    Expert Day on September 21-22 in English (Consumer)
    Expert Day on September 21-22 in English (Enterprise Business)
    Expert Day on September 21 in Portuguese
    Expert Day on September 21 in French 
    Expert Day on September 21 in German
    Expert Day on July 21, 2011 in Simplified Chinese
    Expert Day on July 21, 2011 in Korean
    Expert Day on July 20, 2011 in Spanish
    Expert Day on June 8, 2011 in French
    Expert Day on April 26-27, 2011 in English (Consumer)
    Expert Day on April 26-27, 2011 in English (Enterprise Business)
    Expert Day on April 28th, 2011 in Simplified Chinese
    Expert Day on January 11-12, 2011 in English
    PC Expert Day on June 1-2, 2010 in English
    Printing Expert Day on April 20-21, 2010 in English
    Windows 7 Expert Day in 2009 in English
    PC Performance Expert Day on September 29, 2009 in English
    Improve Your PC’s Performance Expert Day on June 1, 2009 in English
    HP's Mac Printing Experts here in English Sept 9, 2009
    I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

    You can also run Apple Hardware Test in Extended Mode to test it. Neither that nor a PRAM reset will affect your data. I suspect if it finds it the result will be a graphics card failure. You can also take it to your local Apple Store or AASP for professional evaluation. IMHO if it's the graphics card you may want to consider replacing the computer. FWICT it appears to be 4+ years old so it's probably time.

  • [GAVE UP] Failure to initialize graphics device [Thinkpad 530W,Nvidia]

    Hello,
    I fail to use `nvidia` as graphics driver for my xorg on a Thinkpad 530W laptop using Nvidia Quadro 2000M and intel graphics card. Using instead `intel` or `vesa` work. This following logs are with optimus enabled, but I tried the same things with only the nvidia graphics card enabled in the bios and I also fail to load the nvidia driver.
    I followed the advice at
    https://wiki.archlinux.org/index.php/NV … IA_Optimus
    for xorg not to be confused by the presense of two graphics cards.
    Do you have any ideas how I get the nvidia card to run? Should I try Bumblebee? But can this even help if already only the nvidia card by itself makes problem? Do you need any more information?
    Thanks, for any advice,
    Holger
    This is a fresh install on a new laptop and I am new to Arch (but with Linux for a long time).
    Here are the logs:
    XOrg.log
    [ 6.236]
    X.Org X Server 1.14.4
    Release Date: 2013-10-31
    [ 6.236] X Protocol Version 11, Revision 0
    [ 6.236] Build Operating System: Linux 3.11.6-1-ARCH x86_64
    [ 6.236] Current Operating System: Linux ho-think 3.12.2-1-ARCH #1 SMP PREEMPT Fri Nov 29 21:14:15 CET 2013 x86_64
    [ 6.236] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=267f069c-11da-4d2a-88fa-00cab4e28149 rw quiet resume=/dev/sda6
    [ 6.236] Build Date: 01 November 2013 05:10:48PM
    [ 6.236]
    [ 6.236] Current version of pixman: 0.32.4
    [ 6.236] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 6.236] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 6.237] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 5 23:50:52 2013
    [ 6.239] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 6.239] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 6.239] (==) No Layout section. Using the first Screen section.
    [ 6.239] (==) No screen section available. Using defaults.
    [ 6.239] (**) |-->Screen "Default Screen Section" (0)
    [ 6.239] (**) | |-->Monitor "<default monitor>"
    [ 6.240] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 6.240] (**) | |-->Device "Nvidia Card"
    [ 6.240] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 6.240] (==) Automatically adding devices
    [ 6.240] (==) Automatically enabling devices
    [ 6.240] (==) Automatically adding GPU devices
    [ 6.242] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 6.242] Entry deleted from font path.
    [ 6.244] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 6.244] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 6.244] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 6.244] (II) Loader magic: 0x7fdc20
    [ 6.244] (II) Module ABI versions:
    [ 6.244] X.Org ANSI C Emulation: 0.4
    [ 6.244] X.Org Video Driver: 14.1
    [ 6.244] X.Org XInput driver : 19.1
    [ 6.244] X.Org Server Extension : 7.0
    [ 6.244] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 6.245] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 6.246] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f5 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
    [ 6.246] (--) PCI: (0:1:0:0) 10de:0ffb:17aa:21f5 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
    [ 6.246] Initializing built-in extension Generic Event Extension
    [ 6.246] Initializing built-in extension SHAPE
    [ 6.246] Initializing built-in extension MIT-SHM
    [ 6.246] Initializing built-in extension XInputExtension
    [ 6.246] Initializing built-in extension XTEST
    [ 6.246] Initializing built-in extension BIG-REQUESTS
    [ 6.246] Initializing built-in extension SYNC
    [ 6.246] Initializing built-in extension XKEYBOARD
    [ 6.246] Initializing built-in extension XC-MISC
    [ 6.246] Initializing built-in extension SECURITY
    [ 6.247] Initializing built-in extension XINERAMA
    [ 6.247] Initializing built-in extension XFIXES
    [ 6.247] Initializing built-in extension RENDER
    [ 6.247] Initializing built-in extension RANDR
    [ 6.247] Initializing built-in extension COMPOSITE
    [ 6.247] Initializing built-in extension DAMAGE
    [ 6.247] Initializing built-in extension MIT-SCREEN-SAVER
    [ 6.247] Initializing built-in extension DOUBLE-BUFFER
    [ 6.247] Initializing built-in extension RECORD
    [ 6.247] Initializing built-in extension DPMS
    [ 6.247] Initializing built-in extension X-Resource
    [ 6.247] Initializing built-in extension XVideo
    [ 6.247] Initializing built-in extension XVideo-MotionCompensation
    [ 6.247] Initializing built-in extension XFree86-VidModeExtension
    [ 6.247] Initializing built-in extension XFree86-DGA
    [ 6.247] Initializing built-in extension XFree86-DRI
    [ 6.247] Initializing built-in extension DRI2
    [ 6.247] (II) "glx" will be loaded by default.
    [ 6.247] (II) LoadModule: "dri2"
    [ 6.247] (II) Module "dri2" already built-in
    [ 6.247] (II) LoadModule: "glamoregl"
    [ 6.275] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [ 6.475] (II) Module glamoregl: vendor="X.Org Foundation"
    [ 6.475] compiled for 1.14.2, module version = 0.5.1
    [ 6.475] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 6.475] (II) LoadModule: "glx"
    [ 6.475] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 6.517] (II) Module glx: vendor="NVIDIA Corporation"
    [ 6.517] compiled for 4.0.2, module version = 1.0.0
    [ 6.517] Module class: X.Org Server Extension
    [ 6.517] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
    [ 6.517] Loading extension GLX
    [ 6.517] (II) LoadModule: "nvidia"
    [ 6.517] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 6.549] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 6.549] compiled for 4.0.2, module version = 1.0.0
    [ 6.549] Module class: X.Org Video Driver
    [ 6.549] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
    [ 6.549] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 6.549] (++) using VT number 7
    [ 6.553] (II) Loading sub module "fb"
    [ 6.554] (II) LoadModule: "fb"
    [ 6.554] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 6.557] (II) Module fb: vendor="X.Org Foundation"
    [ 6.557] compiled for 1.14.4, module version = 1.0.0
    [ 6.557] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 6.557] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 6.557] (II) Loading sub module "wfb"
    [ 6.557] (II) LoadModule: "wfb"
    [ 6.557] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 6.559] (II) Module wfb: vendor="X.Org Foundation"
    [ 6.559] compiled for 1.14.4, module version = 1.0.0
    [ 6.559] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 6.559] (II) Loading sub module "ramdac"
    [ 6.559] (II) LoadModule: "ramdac"
    [ 6.559] (II) Module "ramdac" already built-in
    [ 6.559] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 6.559] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 6.559] (==) NVIDIA(0): RGB weight 888
    [ 6.559] (==) NVIDIA(0): Default visual is TrueColor
    [ 6.559] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 6.559] (**) NVIDIA(0): Enabling 2D acceleration
    [ 11.161] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 11.161] (EE) NVIDIA(GPU-0): check your system's kernel log for additional error
    [ 11.161] (EE) NVIDIA(GPU-0): messages and refer to Chapter 8: Common Problems in the
    [ 11.161] (EE) NVIDIA(GPU-0): README for additional information.
    [ 11.161] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
    [ 11.161] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 11.161] (II) UnloadModule: "nvidia"
    [ 11.161] (II) UnloadSubModule: "wfb"
    [ 11.161] (II) UnloadSubModule: "fb"
    [ 11.161] (EE) Screen(s) found, but none have a usable configuration.
    [ 11.161] (EE)
    Fatal server error:
    [ 11.161] (EE) no screens found(EE)
    [ 11.161] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 11.161] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 11.162] (EE)
    [ 11.167] (EE) Server terminated with error (1). Closing log file.
    dmesg with the nvidia failure at the end:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Nov 29 21:14:15 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=267f069c-11da-4d2a-88fa-00cab4e28149 rw quiet resume=/dev/sda6
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a6b2ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000a6b30000-0x00000000bae9efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bae9f000-0x00000000baf9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000bf9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043e5fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000043e600000-0x000000043e7fffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 2447DW0/2447DW0, BIOS G5ET93WW (2.53 ) 05/24/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x43e600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask E00000000 write-back
    [ 0.000000] 7 base 400000000 mask FC0000000 write-back
    [ 0.000000] 8 base 43F000000 mask FFF000000 uncachable
    [ 0.000000] 9 base 43E800000 mask FFF800000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xa6b30 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x43e400000-0x43e5fffff]
    [ 0.000000] [mem 0x43e400000-0x43e5fffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43e3fffff]
    [ 0.000000] [mem 0x43c000000-0x43e3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff]
    [ 0.000000] [mem 0x400000000-0x43bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0xa6b2ffff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0xa69fffff] page 2M
    [ 0.000000] [mem 0xa6a00000-0xa6b2ffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
    [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x379be000-0x37cd6fff]
    [ 0.000000] ACPI: RSDP 00000000000f0120 00024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000baffe170 000BC (v01 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: FACP 00000000bafe6000 0010C (v05 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: DSDT 00000000bafe8000 10A68 (v01 LENOVO TP-G5 00002530 INTL 20061109)
    [ 0.000000] ACPI: FACS 00000000baf54000 00040
    [ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 LENOVO TP-G5 00002530 PTL 00000001)
    [ 0.000000] ACPI: TCPA 00000000baffc000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
    [ 0.000000] ACPI: SSDT 00000000baffb000 00408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000baffa000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000baff9000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
    [ 0.000000] ACPI: HPET 00000000bafe4000 00038 (v01 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: APIC 00000000bafe3000 00098 (v01 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: MCFG 00000000bafe2000 0003C (v01 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: ECDT 00000000bafe1000 00052 (v01 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: FPDT 00000000bafe0000 00064 (v01 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: ASF! 00000000bafe7000 000A5 (v32 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: UEFI 00000000bafdf000 0003E (v01 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: UEFI 00000000bafde000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
    [ 0.000000] ACPI: MSDM 00000000bafdd000 00055 (v03 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: SSDT 00000000bafdc000 00D23 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bafdb000 00A83 (v01 PmRef CpuPm 00003000 INTL 20061109)
    [ 0.000000] ACPI: UEFI 00000000bafda000 002A6 (v01 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: DBG2 00000000bafd9000 000E9 (v00 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043e5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43e5fffff]
    [ 0.000000] NODE_DATA [mem 0x43e5ed000-0x43e5f1fff]
    [ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e200000-ffff88043dbfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x43e5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0xa6b2ffff]
    [ 0.000000] node 0: [mem 0x100000000-0x43e5fffff]
    [ 0.000000] On node 0 totalpages: 4083403
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10597 pages used for memmap
    [ 0.000000] DMA32 zone: 678191 pages, LIFO batch:31
    [ 0.000000] Normal zone: 53144 pages used for memmap
    [ 0.000000] Normal zone: 3401216 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa6b30000-0xbae9efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbae9f000-0xbaf9efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbafff000-0xbf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
    [ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88043e200000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4019577
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=267f069c-11da-4d2a-88fa-00cab4e28149 rw quiet resume=/dev/sda6
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 15995556K/16333612K available (5121K kernel code, 807K rwdata, 1708K rodata, 1144K init, 1288K bss, 338056K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 65536000 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2694.031 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5390.56 BogoMIPS (lpj=8980103)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000027] Security Framework initialized
    [ 0.000034] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000035] Yama: becoming mindful.
    [ 0.000923] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.004551] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.006146] Mount-cache hash table entries: 256
    [ 0.006298] Initializing cgroup subsys memory
    [ 0.006306] Initializing cgroup subsys devices
    [ 0.006307] Initializing cgroup subsys freezer
    [ 0.006309] Initializing cgroup subsys net_cls
    [ 0.006310] Initializing cgroup subsys blkio
    [ 0.006329] CPU: Physical Processor ID: 0
    [ 0.006330] CPU: Processor Core ID: 0
    [ 0.006334] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.006663] mce: CPU supports 9 MCE banks
    [ 0.006675] CPU0: Thermal monitoring enabled (TM1)
    [ 0.006685] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 1
    [ 0.006786] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.007682] ACPI: Core revision 20130725
    [ 0.013359] ACPI: All ACPI Tables successfully acquired
    [ 0.014627] ftrace: allocating 20311 entries in 80 pages
    [ 0.023669] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056667] smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.056673] TSC deadline timer enabled
    [ 0.056680] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.056686] ... version: 3
    [ 0.056687] ... bit width: 48
    [ 0.056688] ... generic registers: 4
    [ 0.056689] ... value mask: 0000ffffffffffff
    [ 0.056689] ... max period: 0000ffffffffffff
    [ 0.056690] ... fixed-purpose events: 3
    [ 0.056691] ... event mask: 000000070000000f
    [ 0.093731] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.080104] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
    [ 0.215283] Brought up 8 CPUs
    [ 0.215286] smpboot: Total of 8 processors activated (43121.51 BogoMIPS)
    [ 0.221817] devtmpfs: initialized
    [ 0.225267] PM: Registering ACPI NVS region [mem 0xbae9f000-0xbaf9efff] (1048576 bytes)
    [ 0.225908] RTC time: 22:50:45, date: 12/05/13
    [ 0.225941] NET: Registered protocol family 16
    [ 0.226022] cpuidle: using governor ladder
    [ 0.226024] cpuidle: using governor menu
    [ 0.226046] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.226048] ACPI: bus type PCI registered
    [ 0.226050] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.226221] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.226224] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.230705] PCI: Using configuration type 1 for base access
    [ 0.231329] bio: create slab <bio-0> at 0
    [ 0.231442] ACPI: Added _OSI(Module Device)
    [ 0.231443] ACPI: Added _OSI(Processor Device)
    [ 0.231444] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.231445] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.232701] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.236337] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.272341] ACPI: SSDT 00000000bae3a018 00A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.272660] ACPI: Dynamic OEM Table Load:
    [ 0.272661] ACPI: SSDT (null) 00A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.288532] ACPI: SSDT 00000000bae3ba98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.288874] ACPI: Dynamic OEM Table Load:
    [ 0.288876] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.301731] ACPI: SSDT 00000000bae39d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.302048] ACPI: Dynamic OEM Table Load:
    [ 0.302049] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.316012] ACPI: Interpreter enabled
    [ 0.316018] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.316022] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.316034] ACPI: (supports S0 S3 S4 S5)
    [ 0.316035] ACPI: Using IOAPIC for interrupt routing
    [ 0.316057] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.316633] ACPI: ACPI Dock Station Driver: 2 docks/bays found
    [ 0.328772] ACPI: Power Resource [PUBS] (on)
    [ 0.332509] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.332575] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
    [ 0.332638] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.332701] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
    [ 0.332763] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 9 10 11)
    [ 0.332812] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    [ 0.332874] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.332936] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
    [ 0.332972] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
    [ 0.333055] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 0.333132] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
    [ 0.333133] acpi PNP0A08:00: ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.333260] PCI host bridge to bus 0000:00
    [ 0.333262] pci_bus 0000:00: root bus resource [bus 00-3f]
    [ 0.333264] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.333265] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.333267] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.333268] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff]
    [ 0.333270] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
    [ 0.333277] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.333338] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.333365] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.333416] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.333426] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
    [ 0.333432] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.333436] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
    [ 0.333514] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.333534] pci 0000:00:14.0: reg 0x10: [mem 0xf3a20000-0xf3a2ffff 64bit]
    [ 0.333603] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.333630] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.333664] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.333686] pci 0000:00:16.0: reg 0x10: [mem 0xf3a35000-0xf3a3500f 64bit]
    [ 0.333761] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.333815] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
    [ 0.333833] pci 0000:00:16.3: reg 0x10: [io 0x60b0-0x60b7]
    [ 0.333842] pci 0000:00:16.3: reg 0x14: [mem 0xf3a3c000-0xf3a3cfff]
    [ 0.333964] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
    [ 0.333981] pci 0000:00:19.0: reg 0x10: [mem 0xf3a00000-0xf3a1ffff]
    [ 0.333989] pci 0000:00:19.0: reg 0x14: [mem 0xf3a3b000-0xf3a3bfff]
    [ 0.333997] pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f]
    [ 0.334058] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 0.334085] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 0.334117] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.334137] pci 0000:00:1a.0: reg 0x10: [mem 0xf3a3a000-0xf3a3a3ff]
    [ 0.334226] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.334254] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.334287] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.334302] pci 0000:00:1b.0: reg 0x10: [mem 0xf3a30000-0xf3a33fff 64bit]
    [ 0.334368] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.334400] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.334427] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.334502] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.334557] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 0.334632] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.334687] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
    [ 0.334762] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.334792] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.334829] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.334849] pci 0000:00:1d.0: reg 0x10: [mem 0xf3a39000-0xf3a393ff]
    [ 0.334936] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.334965] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.334997] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
    [ 0.335148] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.335165] pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af]
    [ 0.335173] pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf]
    [ 0.335181] pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7]
    [ 0.335188] pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb]
    [ 0.335195] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
    [ 0.335203] pci 0000:00:1f.2: reg 0x24: [mem 0xf3a38000-0xf3a387ff]
    [ 0.335246] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.335294] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.335309] pci 0000:00:1f.3: reg 0x10: [mem 0xf3a34000-0xf3a340ff 64bit]
    [ 0.335329] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
    [ 0.335425] pci 0000:01:00.0: [10de:0ffb] type 00 class 0x030000
    [ 0.335432] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
    [ 0.335439] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.335445] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    [ 0.335450] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
    [ 0.335454] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 0.341690] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.341695] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 0.341700] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
    [ 0.341706] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.341865] pci 0000:02:00.0: [1180:e823] type 00 class 0x088001
    [ 0.341884] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
    [ 0.341910] pci 0000:02:00.0: reg 0x10: [mem 0xf3101000-0xf31010ff]
    [ 0.342112] pci 0000:02:00.0: supports D1 D2
    [ 0.342113] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.342242] pci 0000:02:00.3: [1180:e832] type 00 class 0x0c0010
    [ 0.342268] pci 0000:02:00.3: reg 0x10: [mem 0xf3100000-0xf31007ff]
    [ 0.342472] pci 0000:02:00.3: supports D1 D2
    [ 0.342474] pci 0000:02:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.348460] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.348465] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    [ 0.348469] pci 0000:00:1c.0: bridge window [mem 0xf3100000-0xf39fffff]
    [ 0.348475] pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
    [ 0.348567] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000
    [ 0.348614] pci 0000:03:00.0: reg 0x10: [mem 0xf3000000-0xf3001fff 64bit]
    [ 0.348839] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.355042] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.355054] pci 0000:00:1c.1: bridge window [mem 0xf3000000-0xf30fffff]
    [ 0.355151] acpiphp: Slot [1] registered
    [ 0.355157] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
    [ 0.355162] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
    [ 0.355165] pci 0000:00:1c.2: bridge window [mem 0xf2800000-0xf2ffffff]
    [ 0.355171] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
    [ 0.356013] ACPI: Enabled 4 GPEs in block 00 to 3F
    [ 0.356023] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.356059] Found 1 acpi root devices
    [ 0.356106] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
    [ 0.356165] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.356169] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 0.356170] vgaarb: loaded
    [ 0.356171] vgaarb: bridge control possible 0000:01:00.0
    [ 0.356172] vgaarb: no bridge control possible 0000:00:02.0
    [ 0.356199] PCI: Using ACPI for IRQ routing
    [ 0.357682] PCI: pci_cache_line_size set to 64 bytes
    [ 0.357820] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.357822] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.357823] e820: reserve RAM buffer [mem 0xa6b30000-0xa7ffffff]
    [ 0.357824] e820: reserve RAM buffer [mem 0x43e600000-0x43fffffff]
    [ 0.357892] NetLabel: Initializing
    [ 0.357893] NetLabel: domain hash size = 128
    [ 0.357894] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.357904] NetLabel: unlabeled traffic allowed by default
    [ 0.357921] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.357925] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.360952] Switched to clocksource hpet
    [ 0.364213] pnp: PnP ACPI init
    [ 0.364226] ACPI: bus type PNP registered
    [ 0.364530] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.364532] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
    [ 0.364534] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
    [ 0.364535] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
    [ 0.364537] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
    [ 0.364538] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
    [ 0.364540] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
    [ 0.364541] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
    [ 0.364545] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
    [ 0.364546] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
    [ 0.364548] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
    [ 0.364549] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
    [ 0.364551] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
    [ 0.364552] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
    [ 0.364554] system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
    [ 0.364555] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
    [ 0.364557] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
    [ 0.364560] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.364624] pnp 00:01: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
    [ 0.364643] system 00:01: [io 0x0400-0x047f] could not be reserved
    [ 0.364644] system 00:01: [io 0x0500-0x057f] has been reserved
    [ 0.364646] system 00:01: [io 0x0800-0x080f] has been reserved
    [ 0.364647] system 00:01: [io 0x15e0-0x15ef] has been reserved
    [ 0.364649] system 00:01: [io 0x1600-0x167f] has been reserved
    [ 0.364651] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.364652] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.364654] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 0.364655] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.364657] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.364658] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
    [ 0.364661] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.364703] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.364710] pnp 00:03: [dma 4]
    [ 0.364723] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.364738] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.364763] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.364782] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.364803] pnp 00:07: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
    [ 0.364824] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
    [ 0.364860] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
    [ 0.365288] pnp: PnP ACPI: found 10 devices
    [ 0.365290] ACPI: bus type PNP unregistered
    [ 0.371588] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 0.371620] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
    [ 0.371622] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.371624] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 0.371627] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
    [ 0.371629] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.371632] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.371635] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    [ 0.371640] pci 0000:00:1c.0: bridge window [mem 0xf3100000-0xf39fffff]
    [ 0.371644] pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
    [ 0.371650] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.371655] pci 0000:00:1c.1: bridge window [mem 0xf3000000-0xf30fffff]
    [ 0.371663] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
    [ 0.371666] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
    [ 0.371671] pci 0000:00:1c.2: bridge window [mem 0xf2800000-0xf2ffffff]
    [ 0.371675] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
    [ 0.371681] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.371683] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.371684] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.371686] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff]
    [ 0.371687] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
    [ 0.371688] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
    [ 0.371690] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
    [ 0.371691] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.371693] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
    [ 0.371694] pci_bus 0000:02: resource 1 [mem 0xf3100000-0xf39fffff]
    [ 0.371695] pci_bus 0000:02: resource 2 [mem 0xf1800000-0xf1ffffff 64bit pref]
    [ 0.371697] pci_bus 0000:03: resource 1 [mem 0xf3000000-0xf30fffff]
    [ 0.371698] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
    [ 0.371700] pci_bus 0000:04: resource 1 [mem 0xf2800000-0xf2ffffff]
    [ 0.371701] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf27fffff 64bit pref]
    [ 0.371726] NET: Registered protocol family 2
    [ 0.371936] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
    [ 0.372200] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.372304] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.372320] TCP: reno registered
    [ 0.372335] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.372381] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.372455] NET: Registered protocol family 1
    [ 0.372464] pci 0000:00:02.0: Boot video device
    [ 0.372838] PCI: CLS 64 bytes, default 64
    [ 0.372874] Unpacking initramfs...
    [ 0.419708] Freeing initrd memory: 3172K (ffff8800379be000 - ffff880037cd7000)
    [ 0.419712] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.419714] software IO TLB [mem 0xa2b30000-0xa6b30000] (64MB) mapped at [ffff8800a2b30000-ffff8800a6b2ffff]
    [ 0.419965] Scanning for low memory corruption every 60 seconds
    [ 0.420184] audit: initializing netlink socket (disabled)
    [ 0.420191] type=2000 audit(1386283845.413:1): initialized
    [ 0.430696] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.431915] zbud: loaded
    [ 0.432021] VFS: Disk quotas dquot_6.5.2
    [ 0.432054] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.432181] msgmni has been set to 31247
    [ 0.432413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.432453] io scheduler noop registered
    [ 0.432454] io scheduler deadline registered
    [ 0.432473] io scheduler cfq registered (default)
    [ 0.432595] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.432864] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.432875] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.432907] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 0.432908] vesafb: scrolling: redraw
    [ 0.432909] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.433568] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005c80000, using 8128k, total 8128k
    [ 0.566342] Console: switching to colour frame buffer device 240x67
    [ 0.698577] fb0: VESA VGA frame buffer device
    [ 0.698590] intel_idle: MWAIT substates: 0x21120
    [ 0.698591] intel_idle: v0.4 model 0x3A
    [ 0.698592] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.698765] GHES: HEST is not enabled!
    [ 0.698809] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.719500] 0000:00:16.3: ttyS0 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
    [ 0.719641] Linux agpgart interface v0.103
    [ 0.719702] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    [ 0.721201] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.721210] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.721298] mousedev: PS/2 mouse device common for all mice
    [ 0.721324] rtc_cmos 00:06: RTC can wake from S4
    [ 0.721444] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 0.721474] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.721482] Intel P-state driver initializing.
    [ 0.721492] Intel pstate controlling: cpu 0
    [ 0.721502] Intel pstate controlling: cpu 1
    [ 0.721510] Intel pstate controlling: cpu 2
    [ 0.721520] Intel pstate controlling: cpu 3
    [ 0.721532] Intel pstate controlling: cpu 4
    [ 0.721541] Intel pstate controlling: cpu 5
    [ 0.721549] Intel pstate controlling: cpu 6
    [ 0.721558] Intel pstate controlling: cpu 7
    [ 0.721630] drop_monitor: Initializing network drop monitor service
    [ 0.721685] TCP: cubic registered
    [ 0.721757] NET: Registered protocol family 10
    [ 0.721886] NET: Registered protocol family 17
    [ 0.721894] Key type dns_resolver registered
    [ 0.722224] registered taskstats version 1
    [ 0.722596] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.723178] Magic number: 9:534:855
    [ 0.723283] rtc_cmos 00:06: setting system clock to 2013-12-05 22:50:46 UTC (1386283846)
    [ 0.723323] PM: Checking hibernation image partition /dev/sda6
    [ 0.726752] PM: Hibernation image not present or could not be loaded.
    [ 0.727429] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 0.727431] Write protecting the kernel read-only data: 8192k
    [ 0.729430] Freeing unused kernel memory: 1012K (ffff880001503000 - ffff880001600000)
    [ 0.730122] Freeing unused kernel memory: 340K (ffff8800017ab000 - ffff880001800000)
    [ 0.737327] systemd-udevd[79]: starting version 208
    [ 0.753625] ACPI: bus type USB registered
    [ 0.753654] usbcore: registered new interface driver usbfs
    [ 0.753672] usbcore: registered new interface driver hub
    [ 0.753762] usbcore: registered new device driver usb
    [ 0.754364] sdhci: Secure Digital Host Controller Interface driver
    [ 0.754367] sdhci: Copyright(c) Pierre Ossman
    [ 0.754471] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
    [ 0.754490] SCSI subsystem initialized
    [ 0.754718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.755262] ehci-pci: EHCI PCI platform driver
    [ 0.755386] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 0.755406] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.755414] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.755427] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.756165] libata version 3.00 loaded.
    [ 0.759355] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.759370] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3a3a000
    [ 0.767505] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.767646] hub 1-0:1.0: USB hub found
    [ 0.767652] hub 1-0:1.0: 3 ports detected
    [ 0.767804] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 0.767809] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.767812] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.767823] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.771708] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.771720] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3a39000
    [ 0.780896] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.780996] hub 2-0:1.0: USB hub found
    [ 0.781000] hub 2-0:1.0: 3 ports detected
    [ 0.781193] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 0.781197] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.781202] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 0.781297] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.781317] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
    [ 0.781456] hub 3-0:1.0: USB hub found
    [ 0.781467] hub 3-0:1.0: 4 ports detected
    [ 0.781705] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.781708] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 0.781799] hub 4-0:1.0: USB hub found
    [ 0.781807] hub 4-0:1.0: 4 ports detected
    [ 0.791001] ahci 0000:00:1f.2: version 3.0
    [ 0.791067] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [ 0.791088] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.804224] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
    [ 0.804231] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst
    [ 0.804239] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.820938] firewire_ohci 0000:02:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
    [ 0.820989] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 5)
    [ 0.821107] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
    [ 0.824627] scsi0 : ahci
    [ 0.824773] scsi1 : ahci
    [ 0.824907] scsi2 : ahci
    [ 0.825041] scsi3 : ahci
    [ 0.825234] scsi4 : ahci
    [ 0.825350] scsi5 : ahci
    [ 0.825384] ata1: SATA max UDMA/133 abar m2048@0xf3a38000 port 0xf3a38100 irq 42
    [ 0.825387] ata2: SATA max UDMA/133 abar m2048@0xf3a38000 port 0xf3a38180 irq 42
    [ 0.825390] ata3: SATA max UDMA/133 abar m2048@0xf3a38000 port 0xf3a38200 irq 42
    [ 0.825391] ata4: DUMMY
    [ 0.825406] ata5: SATA max UDMA/133 abar m2048@0xf3a38000 port 0xf3a38300 irq 42
    [ 0.825406] ata6: DUMMY
    [ 1.074138] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 1.144102] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.145449] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.145455] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.146823] ata1.00: ATA-8: HGST HTS725050A7E630, GH2ZB550, max UDMA/133
    [ 1.146827] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.148298] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.148304] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.149813] ata1.00: configured for UDMA/133
    [ 1.150087] scsi 0:0:0:0: Direct-Access ATA HGST HTS725050A7 GH2Z PQ: 0 ANSI: 5
    [ 1.198525] hub 1-1:1.0: USB hub found
    [ 1.198715] hub 1-1:1.0: 6 ports detected
    [ 1.307453] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.320895] firewire_core 0000:02:00.3: created device fw0: GUID 3c970effbe0ba2ff, S400
    [ 1.420670] tsc: Refined TSC clocksource calibration: 2693.881 MHz
    [ 1.431513] hub 2-1:1.0: USB hub found
    [ 1.431588] hub 2-1:1.0: 8 ports detected
    [ 1.467351] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.471615] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
    [ 1.473091] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
    [ 1.476312] ata2.00: ATAPI: HL-DT-ST DVDRAM GT80N, LT20, max UDMA/133
    [ 1.480154] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
    [ 1.481633] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
    [ 1.484853] ata2.00: configured for UDMA/133
    [ 1.493873] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT80N LT20 PQ: 0 ANSI: 5
    [ 1.590645] usb 3-2: new low-speed USB device number 2 using xhci_hcd
    [ 1.611303] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.611311] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.613287] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.623187] usbcore: registered new interface driver usbhid
    [ 1.623191] usbhid: USB HID core driver
    [ 1.623948] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input2
    [ 1.624086] hid-generic 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
    [ 1.624501] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/input/input3
    [ 1.624758] hid-generic 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
    [ 1.677468] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
    [ 1.813904] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.814517] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.814523] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.814902] ata3.00: ATA-8: SAMSUNG MZMPC032HBCD-000L1, CXM13L1Q, max UDMA/133
    [ 1.814908] ata3.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.815417] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.815424] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.815843] ata3.00: configured for UDMA/133
    [ 1.815996] scsi 2:0:0:0: Direct-Access ATA SAMSUNG MZMPC032 CXM1 PQ: 0 ANSI: 5
    [ 1.827413] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
    [ 1.980746] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
    [ 2.133788] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.138079] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.138084] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 2.138107] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
    [ 2.138214] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.138218] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.138263] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.138291] sd 2:0:0:0: [sdb] Write Protect is off
    [ 2.138294] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.138365] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.139366] sdb: sdb1
    [ 2.139583] sd 2:0:0:0: [sdb] Attached SCSI disk
    [ 2.140832] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.140834] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.140984] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 2.150609] usb 2-1.5: new low-speed USB device number 3 using ehci-pci
    [ 2.217042] raid6: sse2x1 6045 MB/s
    [ 2.222964] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
    [ 2.224086] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.242780] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input4
    [ 2.242927] hid-generic 0003:046D:C051.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.5/input0
    [ 2.273683] raid6: sse2x2 9288 MB/s
    [ 2.330330] raid6: sse2x4 13180 MB/s
    [ 2.330331] raid6: using algorithm sse2x4 (13180 MB/s)
    [ 2.330332] raid6: using ssse3x2 recovery algorithm
    [ 2.330416] xor: automatically using best checksumming function:
    [ 2.363659] avx : 27280.800 MB/sec
    [ 2.365888] bio: create slab <bio-1> at 1
    [ 2.366416] Btrfs loaded
    [ 2.366872] btrfs: device fsid 267f069c-11da-4d2a-88fa-00cab4e28149 devid 1 transid 2746 /dev/sdb1
    [ 2.420417] Switched to clocksource tsc
    [ 2.749348] btrfs: device fsid f6907d81-f46f-4911-8600-858e8b6bd1a0 devid 1 transid 3707 /dev/sda5
    [ 3.007064] PM: Starting manual resume from disk
    [ 3.007067] PM: Hibernation image partition 8:6 present
    [ 3.007068] PM: Looking for hibernation image.
    [ 3.007178] PM: Image not found (code -22)
    [ 3.007183] PM: Hibernation image not present or could not be loaded.
    [ 3.014955] btrfs: device fsid 267f069c-11da-4d2a-88fa-00cab4e28149 devid 1 transid 2746 /dev/sdb1
    [ 3.015285] btrfs: disk space caching is enabled
    [ 3.028402] Btrfs detected SSD devices, enabling SSD mode
    [ 3.211825] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.212136] systemd[1]: Set hostname to <ho-think>.
    [ 3.252550] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.252605] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.252618] systemd[1]: Starting Remote File Systems.
    [ 3.252629] systemd[1]: Reached target Remote File Systems.
    [ 3.252638] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.252667] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.252675] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.252701] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.252709] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.252724] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.252731] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.252748] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.252758] systemd[1]: Starting Journal Socket.
    [ 3.252795] systemd[1]: Listening on Journal Socket.
    [ 3.253090] systemd[1]: Starting Apply Kernel Variables...
    [ 3.253532] systemd[1]: Starting Journal Service...
    [ 3.253811] systemd[1]: Started Journal Service.
    [ 3.287546] systemd-journald[182]: Vacuuming done, freed 0 bytes
    [ 3.390618] btrfs: use ssd allocation scheme
    [ 3.390622] btrfs: disk space caching is enabled
    [ 3.400329] systemd-udevd[218]: starting version 208
    [ 3.490322] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 3.491089] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 3.491746] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
    [ 3.491865] ACPI: Lid Switch [LID]
    [ 3.492466] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130725/utaddress-251)
    [ 3.492471] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.492475] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
    [ 3.492490] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.492491] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
    [ 3.492494] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.492495] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 3.493000] pps_core: LinuxPPS API ver. 1 registered
    [ 3.493002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 3.493659] ACPI: Requesting acpi_cpufreq
    [ 3.493823] PTP clock support registered
    [ 3.494020] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
    [ 3.494025] ACPI: Sleep Button [SLPB]
    [ 3.494069] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
    [ 3.494071] ACPI: Power Button [PWRF]
    [ 3.494675] mei_me 0000:00:16.0: setting latency timer to 64
    [ 3.494714] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
    [ 3.494990] ACPI: AC Adapter [AC] (on-line)
    [ 3.495691] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
    [ 3.498616] Non-volatile memory driver v1.3
    [ 3.498683] [drm] Initialized drm 1.1.0 20060810
    [ 3.499437] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 3.502565] ACPI: Battery Slot [BAT0] (battery present)
    [ 3.502633] thinkpad_acpi: ThinkPad ACPI Extras v0.24
    [ 3.502635] thinkpad_acpi: http://ibm-acpi.sf.net/
    [ 3.502636] thinkpad_acpi: ThinkPad BIOS G5ET93WW (2.53 ), EC unknown
    [ 3.502637] thinkpad_acpi: Lenovo ThinkPad W530, model 2447DW0
    [ 3.504741] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 3.504742] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [ 3.504806] e1000e 0000:00:19.0: setting latency timer to 64
    [ 3.504855] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 3.504869] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 3.505719] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
    [ 3.505814] thinkpad_acpi: radio switch found; radios are enabled
    [ 3.507612] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
    [ 3.507614] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
    [ 3.508991] wmi: Mapper loaded
    [ 3.510574] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
    [ 3.512202] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
    [ 3.512859] thermal LNXTHERM:00: registered as thermal_zone0
    [ 3.512862] ACPI: Thermal Zone [THM0] (51 C)
    [ 3.512964] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
    [ 3.513826] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
    [ 3.519211] cfg80211: Calling CRDA to update world regulatory domain
    [ 3.529719] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 3.529721] Copyright(c) 2003-2013 Intel Corporation
    [ 3.529746] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
    [ 3.529786] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 3.529839] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
    [ 3.541982] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
    [ 3.557020] media: Linux media interface: v0.10
    [ 3.559314] Bluetooth: Core ver 2.16
    [ 3.559324] NET: Registered protocol family 31
    [ 3.559325] Bluetooth: HCI device and connection manager initialized
    [ 3.559331] Bluetooth: HCI socket layer initialized
    [ 3.559332] Bluetooth: L2CAP socket layer initialized
    [ 3.559338] Bluetooth: SCO socket layer initialized
    [ 3.559760] Linux video capture interface: v2.00
    [ 3.561090] btrfs: device fsid 267f069c-11da-4d2a-88fa-00cab4e28149 devid 1 transid 2747 /dev/sdb1
    [ 3.563306] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
    [ 3.565201] usbcore: registered new interface driver btusb
    [ 3.565757] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
    [ 3.567801] iTCO_vendor_support: vendor-support=0
    [ 3.568229] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11
    [ 3.568341] usbcore: registered new interface driver uvcvideo
    [ 3.568342] USB Video Class driver (1.1.1)
    [ 3.568802] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 3.568825] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 3.568884] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 3.575973] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
    [ 3.579387] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
    [ 3.580314] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
    [ 3.580610] nvidia: module license 'NVIDIA' taints kernel.
    [ 3.580612] Disabling lock debugging due to kernel taint
    [ 3.580964] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x17
    [ 3.581262] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x17
    [ 3.581662] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x17
    [ 3.581969] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x17
    [ 3.582235] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 3.585585] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
    [ 3.585626] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [ 3.585753] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
    [ 3.585756] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.20 Wed Oct 30 17:43:35 PDT 2013
    [ 3.590299] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
    [ 3.604935] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 3.604939] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 3.604940] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 3.604942] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
    [ 3.604991] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
    [ 3.611807] kvm: disabled by bios
    [ 3.622449] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 3.643289] systemd-udevd[222]: renamed network interface wlan0 to wlp3s0
    [ 3.699041] e1000e 0000:00:19.0 eth0: registered PHC clock
    [ 3.699043] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:be:0b:a2
    [ 3.699045] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
    [ 3.699088] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
    [ 3.699268]

    I decided to use nouveau instead of nvidia and now I got my external an internal display working.

  • [Solved] Report on Issue with Kernel Config with Nvidia Graphics

    I switched back to Archlinux from Gentoo recently and I have been having problems with the system freezing during boot before X is started, even with the nvidia module blacklisted.  Trying several module versions yielded different results, all of which render the laptop inoperable.  In some versions, it freezes with the display still on, sometimes the display goes dark.  The system has never booted unless I had ignore_loglevel and debug on the command line.  The above only applies when the system is set to discrete graphics only in the BIOS.  The system works fine under optimus.  (Before people ask, I need this to use the Display Port/HDMI.)  The only relevant error I can find is as follows:
    NVRM: GPU at 0000:01:00.0 has fallen off the bus.
    I am able to reproduce this issue even with rcutree.rcu_idle_gp_delay=1 in the kernel command line.  Since a simmilar configuration worked under Gentoo, I moved over my kernel and modules backed up from my Gentoo installation and made a basic, custom mkinitcpio configuration file for it, and generated an initramfs for the Gentoo kernel.  Because of the kernel changes, I had to rebuild the Nvidia drivers.  I did this by running the default Nvidia installer NVIDIA-Linux-x86_64-343.22.run outside of Pacman. (As a side note, I did accidentally test running the Nvidia installer with the default kernel and the issue persisted.)  Using the Gentoo kernel and the Nvidia installer resolved the issue, which narrowed down the issue to the kernel configuration.  I started merging the configuration with Arch's configuration going by menu's.  The issue reoccured when I merged the Enable the block layer and Processor type and features with the configuration Arch uses.  The current configuration that I am using that reproduces the issue is:
    # Automatically generated file; DO NOT EDIT.
    # Linux/x86 3.17.2-gentoo Kernel Configuration
    # Gentoo Linux
    CONFIG_GENTOO_LINUX=y
    CONFIG_GENTOO_LINUX_UDEV=y
    # Support for init systems, system and service managers
    CONFIG_GENTOO_LINUX_INIT_SCRIPT=y
    CONFIG_GENTOO_LINUX_INIT_SYSTEMD=y
    CONFIG_64BIT=y
    CONFIG_X86_64=y
    CONFIG_X86=y
    CONFIG_INSTRUCTION_DECODER=y
    CONFIG_OUTPUT_FORMAT="elf64-x86-64"
    CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
    CONFIG_LOCKDEP_SUPPORT=y
    CONFIG_STACKTRACE_SUPPORT=y
    CONFIG_HAVE_LATENCYTOP_SUPPORT=y
    CONFIG_MMU=y
    CONFIG_NEED_DMA_MAP_STATE=y
    CONFIG_NEED_SG_DMA_LENGTH=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_BUG=y
    CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
    CONFIG_GENERIC_HWEIGHT=y
    CONFIG_ARCH_MAY_HAVE_PC_FDC=y
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    CONFIG_ARCH_HAS_CPU_RELAX=y
    CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
    CONFIG_HAVE_SETUP_PER_CPU_AREA=y
    CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
    CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
    CONFIG_ARCH_HIBERNATION_POSSIBLE=y
    CONFIG_ARCH_SUSPEND_POSSIBLE=y
    CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
    CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
    CONFIG_ZONE_DMA32=y
    CONFIG_AUDIT_ARCH=y
    CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
    CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
    CONFIG_HAVE_INTEL_TXT=y
    CONFIG_X86_64_SMP=y
    CONFIG_X86_HT=y
    CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
    CONFIG_ARCH_SUPPORTS_UPROBES=y
    CONFIG_FIX_EARLYCON_MEM=y
    CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
    CONFIG_IRQ_WORK=y
    CONFIG_BUILDTIME_EXTABLE_SORT=y
    # General setup
    CONFIG_INIT_ENV_ARG_LIMIT=32
    CONFIG_CROSS_COMPILE=""
    # CONFIG_COMPILE_TEST is not set
    CONFIG_LOCALVERSION="-tachibana"
    # CONFIG_LOCALVERSION_AUTO is not set
    CONFIG_HAVE_KERNEL_GZIP=y
    CONFIG_HAVE_KERNEL_BZIP2=y
    CONFIG_HAVE_KERNEL_LZMA=y
    CONFIG_HAVE_KERNEL_XZ=y
    CONFIG_HAVE_KERNEL_LZO=y
    CONFIG_HAVE_KERNEL_LZ4=y
    CONFIG_KERNEL_GZIP=y
    # CONFIG_KERNEL_BZIP2 is not set
    # CONFIG_KERNEL_LZMA is not set
    # CONFIG_KERNEL_XZ is not set
    # CONFIG_KERNEL_LZO is not set
    # CONFIG_KERNEL_LZ4 is not set
    CONFIG_DEFAULT_HOSTNAME="(none)"
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_SYSVIPC_SYSCTL=y
    CONFIG_POSIX_MQUEUE=y
    CONFIG_POSIX_MQUEUE_SYSCTL=y
    CONFIG_CROSS_MEMORY_ATTACH=y
    CONFIG_FHANDLE=y
    # CONFIG_USELIB is not set
    # CONFIG_AUDIT is not set
    CONFIG_HAVE_ARCH_AUDITSYSCALL=y
    # IRQ subsystem
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_GENERIC_IRQ_SHOW=y
    CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
    CONFIG_GENERIC_PENDING_IRQ=y
    CONFIG_IRQ_DOMAIN=y
    # CONFIG_IRQ_DOMAIN_DEBUG is not set
    CONFIG_IRQ_FORCED_THREADING=y
    CONFIG_SPARSE_IRQ=y
    CONFIG_CLOCKSOURCE_WATCHDOG=y
    CONFIG_ARCH_CLOCKSOURCE_DATA=y
    CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
    CONFIG_GENERIC_TIME_VSYSCALL=y
    CONFIG_GENERIC_CLOCKEVENTS=y
    CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
    CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
    CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
    CONFIG_GENERIC_CMOS_UPDATE=y
    # Timers subsystem
    CONFIG_TICK_ONESHOT=y
    CONFIG_NO_HZ_COMMON=y
    # CONFIG_HZ_PERIODIC is not set
    CONFIG_NO_HZ_IDLE=y
    # CONFIG_NO_HZ_FULL is not set
    # CONFIG_NO_HZ is not set
    CONFIG_HIGH_RES_TIMERS=y
    # CPU/Task time and stats accounting
    CONFIG_TICK_CPU_ACCOUNTING=y
    # CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
    # CONFIG_IRQ_TIME_ACCOUNTING is not set
    CONFIG_BSD_PROCESS_ACCT=y
    CONFIG_BSD_PROCESS_ACCT_V3=y
    CONFIG_TASKSTATS=y
    CONFIG_TASK_DELAY_ACCT=y
    CONFIG_TASK_XACCT=y
    CONFIG_TASK_IO_ACCOUNTING=y
    # RCU Subsystem
    CONFIG_TREE_PREEMPT_RCU=y
    CONFIG_PREEMPT_RCU=y
    CONFIG_RCU_STALL_COMMON=y
    # CONFIG_RCU_USER_QS is not set
    CONFIG_RCU_FANOUT=64
    CONFIG_RCU_FANOUT_LEAF=16
    # CONFIG_RCU_FANOUT_EXACT is not set
    # CONFIG_RCU_FAST_NO_HZ is not set
    # CONFIG_TREE_RCU_TRACE is not set
    # CONFIG_RCU_BOOST is not set
    # CONFIG_RCU_NOCB_CPU is not set
    CONFIG_BUILD_BIN2C=y
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    CONFIG_LOG_BUF_SHIFT=19
    CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
    CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
    CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
    CONFIG_ARCH_SUPPORTS_INT128=y
    CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
    CONFIG_ARCH_USES_NUMA_PROT_NONE=y
    CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
    CONFIG_NUMA_BALANCING=y
    CONFIG_CGROUPS=y
    # CONFIG_CGROUP_DEBUG is not set
    CONFIG_CGROUP_FREEZER=y
    CONFIG_CGROUP_DEVICE=y
    CONFIG_CPUSETS=y
    CONFIG_PROC_PID_CPUSET=y
    CONFIG_CGROUP_CPUACCT=y
    CONFIG_RESOURCE_COUNTERS=y
    CONFIG_MEMCG=y
    CONFIG_MEMCG_SWAP=y
    # CONFIG_MEMCG_SWAP_ENABLED is not set
    # CONFIG_MEMCG_KMEM is not set
    # CONFIG_CGROUP_HUGETLB is not set
    # CONFIG_CGROUP_PERF is not set
    CONFIG_CGROUP_SCHED=y
    CONFIG_FAIR_GROUP_SCHED=y
    CONFIG_CFS_BANDWIDTH=y
    CONFIG_RT_GROUP_SCHED=y
    CONFIG_BLK_CGROUP=y
    # CONFIG_DEBUG_BLK_CGROUP is not set
    # CONFIG_CHECKPOINT_RESTORE is not set
    CONFIG_NAMESPACES=y
    CONFIG_UTS_NS=y
    CONFIG_IPC_NS=y
    # CONFIG_USER_NS is not set
    CONFIG_PID_NS=y
    CONFIG_NET_NS=y
    CONFIG_SCHED_AUTOGROUP=y
    # CONFIG_SYSFS_DEPRECATED is not set
    CONFIG_RELAY=y
    CONFIG_BLK_DEV_INITRD=y
    CONFIG_INITRAMFS_SOURCE=""
    CONFIG_RD_GZIP=y
    CONFIG_RD_BZIP2=y
    CONFIG_RD_LZMA=y
    CONFIG_RD_XZ=y
    CONFIG_RD_LZO=y
    CONFIG_RD_LZ4=y
    # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
    CONFIG_SYSCTL=y
    CONFIG_ANON_INODES=y
    CONFIG_HAVE_UID16=y
    CONFIG_SYSCTL_EXCEPTION_TRACE=y
    CONFIG_HAVE_PCSPKR_PLATFORM=y
    # CONFIG_EXPERT is not set
    CONFIG_UID16=y
    CONFIG_SGETMASK_SYSCALL=y
    CONFIG_SYSFS_SYSCALL=y
    # CONFIG_SYSCTL_SYSCALL is not set
    CONFIG_KALLSYMS=y
    # CONFIG_KALLSYMS_ALL is not set
    CONFIG_PRINTK=y
    CONFIG_BUG=y
    CONFIG_ELF_CORE=y
    CONFIG_PCSPKR_PLATFORM=y
    CONFIG_BASE_FULL=y
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_SIGNALFD=y
    CONFIG_TIMERFD=y
    CONFIG_EVENTFD=y
    CONFIG_SHMEM=y
    CONFIG_AIO=y
    CONFIG_PCI_QUIRKS=y
    # CONFIG_EMBEDDED is not set
    CONFIG_HAVE_PERF_EVENTS=y
    # Kernel Performance Events And Counters
    CONFIG_PERF_EVENTS=y
    # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
    CONFIG_VM_EVENT_COUNTERS=y
    CONFIG_SLUB_DEBUG=y
    # CONFIG_COMPAT_BRK is not set
    # CONFIG_SLAB is not set
    CONFIG_SLUB=y
    CONFIG_SLUB_CPU_PARTIAL=y
    CONFIG_SYSTEM_TRUSTED_KEYRING=y
    CONFIG_PROFILING=y
    CONFIG_TRACEPOINTS=y
    CONFIG_OPROFILE=m
    # CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
    CONFIG_HAVE_OPROFILE=y
    CONFIG_OPROFILE_NMI_TIMER=y
    CONFIG_KPROBES=y
    CONFIG_JUMP_LABEL=y
    CONFIG_KPROBES_ON_FTRACE=y
    CONFIG_UPROBES=y
    # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
    CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
    CONFIG_ARCH_USE_BUILTIN_BSWAP=y
    CONFIG_KRETPROBES=y
    CONFIG_USER_RETURN_NOTIFIER=y
    CONFIG_HAVE_IOREMAP_PROT=y
    CONFIG_HAVE_KPROBES=y
    CONFIG_HAVE_KRETPROBES=y
    CONFIG_HAVE_OPTPROBES=y
    CONFIG_HAVE_KPROBES_ON_FTRACE=y
    CONFIG_HAVE_ARCH_TRACEHOOK=y
    CONFIG_HAVE_DMA_ATTRS=y
    CONFIG_HAVE_DMA_CONTIGUOUS=y
    CONFIG_GENERIC_SMP_IDLE_THREAD=y
    CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
    CONFIG_HAVE_DMA_API_DEBUG=y
    CONFIG_HAVE_HW_BREAKPOINT=y
    CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
    CONFIG_HAVE_USER_RETURN_NOTIFIER=y
    CONFIG_HAVE_PERF_EVENTS_NMI=y
    CONFIG_HAVE_PERF_REGS=y
    CONFIG_HAVE_PERF_USER_STACK_DUMP=y
    CONFIG_HAVE_ARCH_JUMP_LABEL=y
    CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
    CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
    CONFIG_HAVE_CMPXCHG_LOCAL=y
    CONFIG_HAVE_CMPXCHG_DOUBLE=y
    CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
    CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
    CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
    CONFIG_SECCOMP_FILTER=y
    CONFIG_HAVE_CC_STACKPROTECTOR=y
    CONFIG_CC_STACKPROTECTOR=y
    # CONFIG_CC_STACKPROTECTOR_NONE is not set
    # CONFIG_CC_STACKPROTECTOR_REGULAR is not set
    CONFIG_CC_STACKPROTECTOR_STRONG=y
    CONFIG_HAVE_CONTEXT_TRACKING=y
    CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
    CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
    CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
    CONFIG_HAVE_ARCH_SOFT_DIRTY=y
    CONFIG_MODULES_USE_ELF_RELA=y
    CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
    CONFIG_OLD_SIGSUSPEND3=y
    CONFIG_COMPAT_OLD_SIGACTION=y
    # GCOV-based kernel profiling
    # CONFIG_GCOV_KERNEL is not set
    # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
    CONFIG_SLABINFO=y
    CONFIG_RT_MUTEXES=y
    CONFIG_BASE_SMALL=0
    CONFIG_MODULES=y
    CONFIG_MODULE_FORCE_LOAD=y
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    CONFIG_MODVERSIONS=y
    # CONFIG_MODULE_SRCVERSION_ALL is not set
    # CONFIG_MODULE_SIG is not set
    CONFIG_STOP_MACHINE=y
    CONFIG_BLOCK=y
    CONFIG_BLK_DEV_BSG=y
    CONFIG_BLK_DEV_BSGLIB=y
    CONFIG_BLK_DEV_INTEGRITY=y
    CONFIG_BLK_DEV_THROTTLING=y
    # CONFIG_BLK_CMDLINE_PARSER is not set
    # Partition Types
    CONFIG_PARTITION_ADVANCED=y
    # CONFIG_ACORN_PARTITION is not set
    CONFIG_AIX_PARTITION=y
    # CONFIG_OSF_PARTITION is not set
    # CONFIG_AMIGA_PARTITION is not set
    # CONFIG_ATARI_PARTITION is not set
    CONFIG_MAC_PARTITION=y
    CONFIG_MSDOS_PARTITION=y
    CONFIG_BSD_DISKLABEL=y
    CONFIG_MINIX_SUBPARTITION=y
    CONFIG_SOLARIS_X86_PARTITION=y
    # CONFIG_UNIXWARE_DISKLABEL is not set
    CONFIG_LDM_PARTITION=y
    # CONFIG_LDM_DEBUG is not set
    # CONFIG_SGI_PARTITION is not set
    # CONFIG_ULTRIX_PARTITION is not set
    # CONFIG_SUN_PARTITION is not set
    CONFIG_KARMA_PARTITION=y
    CONFIG_EFI_PARTITION=y
    # CONFIG_SYSV68_PARTITION is not set
    # CONFIG_CMDLINE_PARTITION is not set
    CONFIG_BLOCK_COMPAT=y
    # IO Schedulers
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    CONFIG_CFQ_GROUP_IOSCHED=y
    # CONFIG_DEFAULT_DEADLINE is not set
    CONFIG_DEFAULT_CFQ=y
    # CONFIG_DEFAULT_NOOP is not set
    CONFIG_DEFAULT_IOSCHED="cfq"
    CONFIG_PREEMPT_NOTIFIERS=y
    CONFIG_UNINLINE_SPIN_UNLOCK=y
    CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
    CONFIG_MUTEX_SPIN_ON_OWNER=y
    CONFIG_RWSEM_SPIN_ON_OWNER=y
    CONFIG_ARCH_USE_QUEUE_RWLOCK=y
    CONFIG_QUEUE_RWLOCK=y
    CONFIG_FREEZER=y
    # Processor type and features
    CONFIG_ZONE_DMA=y
    CONFIG_SMP=y
    CONFIG_X86_MPPARSE=y
    # CONFIG_X86_EXTENDED_PLATFORM is not set
    # CONFIG_X86_INTEL_LPSS is not set
    CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
    CONFIG_SCHED_OMIT_FRAME_POINTER=y
    CONFIG_HYPERVISOR_GUEST=y
    CONFIG_PARAVIRT=y
    # CONFIG_PARAVIRT_DEBUG is not set
    # CONFIG_PARAVIRT_SPINLOCKS is not set
    CONFIG_XEN=y
    CONFIG_XEN_DOM0=y
    CONFIG_XEN_PVHVM=y
    CONFIG_XEN_MAX_DOMAIN_MEMORY=500
    CONFIG_XEN_SAVE_RESTORE=y
    # CONFIG_XEN_DEBUG_FS is not set
    CONFIG_XEN_PVH=y
    CONFIG_KVM_GUEST=y
    # CONFIG_KVM_DEBUG_FS is not set
    CONFIG_PARAVIRT_TIME_ACCOUNTING=y
    CONFIG_PARAVIRT_CLOCK=y
    CONFIG_NO_BOOTMEM=y
    # CONFIG_MEMTEST is not set
    # CONFIG_MK8 is not set
    # CONFIG_MPSC is not set
    # CONFIG_MCORE2 is not set
    # CONFIG_MATOM is not set
    CONFIG_GENERIC_CPU=y
    CONFIG_X86_INTERNODE_CACHE_SHIFT=6
    CONFIG_X86_L1_CACHE_SHIFT=6
    CONFIG_X86_TSC=y
    CONFIG_X86_CMPXCHG64=y
    CONFIG_X86_CMOV=y
    CONFIG_X86_MINIMUM_CPU_FAMILY=64
    CONFIG_X86_DEBUGCTLMSR=y
    CONFIG_CPU_SUP_INTEL=y
    CONFIG_CPU_SUP_AMD=y
    CONFIG_CPU_SUP_CENTAUR=y
    CONFIG_HPET_TIMER=y
    CONFIG_HPET_EMULATE_RTC=y
    CONFIG_DMI=y
    CONFIG_GART_IOMMU=y
    CONFIG_CALGARY_IOMMU=y
    CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
    CONFIG_SWIOTLB=y
    CONFIG_IOMMU_HELPER=y
    # CONFIG_MAXSMP is not set
    CONFIG_NR_CPUS=128
    CONFIG_SCHED_SMT=y
    CONFIG_SCHED_MC=y
    # CONFIG_PREEMPT_NONE is not set
    # CONFIG_PREEMPT_VOLUNTARY is not set
    CONFIG_PREEMPT=y
    CONFIG_PREEMPT_COUNT=y
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
    CONFIG_X86_MCE=y
    CONFIG_X86_MCE_INTEL=y
    CONFIG_X86_MCE_AMD=y
    CONFIG_X86_MCE_THRESHOLD=y
    # CONFIG_X86_MCE_INJECT is not set
    CONFIG_X86_THERMAL_VECTOR=y
    CONFIG_X86_16BIT=y
    CONFIG_X86_ESPFIX64=y
    CONFIG_I8K=m
    CONFIG_MICROCODE=y
    CONFIG_MICROCODE_INTEL=y
    CONFIG_MICROCODE_AMD=y
    CONFIG_MICROCODE_OLD_INTERFACE=y
    CONFIG_MICROCODE_INTEL_EARLY=y
    CONFIG_MICROCODE_AMD_EARLY=y
    CONFIG_MICROCODE_EARLY=y
    CONFIG_X86_MSR=m
    CONFIG_X86_CPUID=m
    CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
    CONFIG_ARCH_DMA_ADDR_T_64BIT=y
    CONFIG_DIRECT_GBPAGES=y
    CONFIG_NUMA=y
    CONFIG_AMD_NUMA=y
    CONFIG_X86_64_ACPI_NUMA=y
    CONFIG_NODES_SPAN_OTHER_NODES=y
    # CONFIG_NUMA_EMU is not set
    CONFIG_NODES_SHIFT=6
    CONFIG_ARCH_SPARSEMEM_ENABLE=y
    CONFIG_ARCH_SPARSEMEM_DEFAULT=y
    CONFIG_ARCH_SELECT_MEMORY_MODEL=y
    CONFIG_ARCH_PROC_KCORE_TEXT=y
    CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
    CONFIG_SELECT_MEMORY_MODEL=y
    CONFIG_SPARSEMEM_MANUAL=y
    CONFIG_SPARSEMEM=y
    CONFIG_NEED_MULTIPLE_NODES=y
    CONFIG_HAVE_MEMORY_PRESENT=y
    CONFIG_SPARSEMEM_EXTREME=y
    CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
    CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
    CONFIG_SPARSEMEM_VMEMMAP=y
    CONFIG_HAVE_MEMBLOCK=y
    CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
    CONFIG_ARCH_DISCARD_MEMBLOCK=y
    # CONFIG_MOVABLE_NODE is not set
    # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
    # CONFIG_MEMORY_HOTPLUG is not set
    CONFIG_PAGEFLAGS_EXTENDED=y
    CONFIG_SPLIT_PTLOCK_CPUS=4
    CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
    CONFIG_BALLOON_COMPACTION=y
    CONFIG_COMPACTION=y
    CONFIG_MIGRATION=y
    CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
    CONFIG_PHYS_ADDR_T_64BIT=y
    CONFIG_ZONE_DMA_FLAG=1
    CONFIG_BOUNCE=y
    CONFIG_VIRT_TO_BUS=y
    CONFIG_MMU_NOTIFIER=y
    CONFIG_KSM=y
    CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
    CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
    # CONFIG_MEMORY_FAILURE is not set
    CONFIG_TRANSPARENT_HUGEPAGE=y
    CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
    # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
    CONFIG_CLEANCACHE=y
    CONFIG_FRONTSWAP=y
    # CONFIG_CMA is not set
    # CONFIG_ZSWAP is not set
    CONFIG_ZPOOL=y
    CONFIG_ZBUD=y
    CONFIG_ZSMALLOC=y
    # CONFIG_PGTABLE_MAPPING is not set
    CONFIG_GENERIC_EARLY_IOREMAP=y
    CONFIG_X86_CHECK_BIOS_CORRUPTION=y
    CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
    CONFIG_X86_RESERVE_LOW=64
    CONFIG_MTRR=y
    CONFIG_MTRR_SANITIZER=y
    CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
    CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
    CONFIG_X86_PAT=y
    CONFIG_ARCH_USES_PG_UNCACHED=y
    CONFIG_ARCH_RANDOM=y
    CONFIG_X86_SMAP=y
    CONFIG_EFI=y
    # CONFIG_EFI_STUB is not set
    CONFIG_SECCOMP=y
    # CONFIG_HZ_100 is not set
    # CONFIG_HZ_250 is not set
    CONFIG_HZ_300=y
    # CONFIG_HZ_1000 is not set
    CONFIG_HZ=300
    CONFIG_SCHED_HRTICK=y
    CONFIG_KEXEC=y
    # CONFIG_KEXEC_FILE is not set
    # CONFIG_CRASH_DUMP is not set
    CONFIG_KEXEC_JUMP=y
    CONFIG_PHYSICAL_START=0x1000000
    CONFIG_RELOCATABLE=y
    # CONFIG_RANDOMIZE_BASE is not set
    CONFIG_PHYSICAL_ALIGN=0x1000000
    CONFIG_HOTPLUG_CPU=y
    # CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
    # CONFIG_DEBUG_HOTPLUG_CPU0 is not set
    # CONFIG_COMPAT_VDSO is not set
    # CONFIG_CMDLINE_BOOL is not set
    CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
    CONFIG_USE_PERCPU_NUMA_NODE_ID=y
    # Power management and ACPI options
    CONFIG_ARCH_HIBERNATION_HEADER=y
    CONFIG_SUSPEND=y
    CONFIG_SUSPEND_FREEZER=y
    CONFIG_HIBERNATE_CALLBACKS=y
    CONFIG_HIBERNATION=y
    CONFIG_PM_STD_PARTITION=""
    CONFIG_PM_SLEEP=y
    CONFIG_PM_SLEEP_SMP=y
    CONFIG_PM_AUTOSLEEP=y
    # CONFIG_PM_WAKELOCKS is not set
    CONFIG_PM_RUNTIME=y
    CONFIG_PM=y
    CONFIG_PM_DEBUG=y
    # CONFIG_PM_ADVANCED_DEBUG is not set
    # CONFIG_PM_TEST_SUSPEND is not set
    CONFIG_PM_SLEEP_DEBUG=y
    CONFIG_PM_TRACE=y
    CONFIG_PM_TRACE_RTC=y
    # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
    CONFIG_ACPI=y
    CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
    CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
    CONFIG_ACPI_SLEEP=y
    # CONFIG_ACPI_PROCFS_POWER is not set
    # CONFIG_ACPI_EC_DEBUGFS is not set
    CONFIG_ACPI_AC=y
    CONFIG_ACPI_BATTERY=y
    CONFIG_ACPI_BUTTON=y
    CONFIG_ACPI_VIDEO=y
    CONFIG_ACPI_FAN=y
    CONFIG_ACPI_DOCK=y
    CONFIG_ACPI_PROCESSOR=y
    CONFIG_ACPI_HOTPLUG_CPU=y
    # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
    CONFIG_ACPI_THERMAL=y
    CONFIG_ACPI_NUMA=y
    CONFIG_ACPI_CUSTOM_DSDT_FILE=""
    # CONFIG_ACPI_CUSTOM_DSDT is not set
    # CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
    # CONFIG_ACPI_DEBUG is not set
    # CONFIG_ACPI_PCI_SLOT is not set
    CONFIG_X86_PM_TIMER=y
    CONFIG_ACPI_CONTAINER=y
    # CONFIG_ACPI_SBS is not set
    # CONFIG_ACPI_HED is not set
    # CONFIG_ACPI_CUSTOM_METHOD is not set
    # CONFIG_ACPI_BGRT is not set
    # CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
    CONFIG_HAVE_ACPI_APEI=y
    CONFIG_HAVE_ACPI_APEI_NMI=y
    # CONFIG_ACPI_APEI is not set
    CONFIG_ACPI_EXTLOG=y
    # CONFIG_SFI is not set
    # CPU Frequency scaling
    CONFIG_CPU_FREQ=y
    CONFIG_CPU_FREQ_GOV_COMMON=y
    CONFIG_CPU_FREQ_STAT=m
    CONFIG_CPU_FREQ_STAT_DETAILS=y
    # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
    # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
    CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
    # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
    CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
    CONFIG_CPU_FREQ_GOV_POWERSAVE=m
    CONFIG_CPU_FREQ_GOV_USERSPACE=m
    CONFIG_CPU_FREQ_GOV_ONDEMAND=y
    CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
    # x86 CPU frequency scaling drivers
    CONFIG_X86_INTEL_PSTATE=y
    # CONFIG_X86_PCC_CPUFREQ is not set
    CONFIG_X86_ACPI_CPUFREQ=y
    CONFIG_X86_ACPI_CPUFREQ_CPB=y
    # CONFIG_X86_POWERNOW_K8 is not set
    # CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
    # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
    # CONFIG_X86_P4_CLOCKMOD is not set
    # shared options
    # CONFIG_X86_SPEEDSTEP_LIB is not set
    # CPU Idle
    CONFIG_CPU_IDLE=y
    CONFIG_CPU_IDLE_GOV_LADDER=y
    CONFIG_CPU_IDLE_GOV_MENU=y
    # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
    CONFIG_INTEL_IDLE=y
    # Memory power savings
    # CONFIG_I7300_IDLE is not set
    # Bus options (PCI etc.)
    CONFIG_PCI=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    CONFIG_PCI_XEN=y
    CONFIG_PCI_DOMAINS=y
    CONFIG_PCIEPORTBUS=y
    CONFIG_PCIEAER=y
    # CONFIG_PCIE_ECRC is not set
    # CONFIG_PCIEAER_INJECT is not set
    CONFIG_PCIEASPM=y
    # CONFIG_PCIEASPM_DEBUG is not set
    CONFIG_PCIEASPM_DEFAULT=y
    # CONFIG_PCIEASPM_POWERSAVE is not set
    # CONFIG_PCIEASPM_PERFORMANCE is not set
    CONFIG_PCIE_PME=y
    CONFIG_PCI_MSI=y
    # CONFIG_PCI_DEBUG is not set
    # CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
    # CONFIG_PCI_STUB is not set
    CONFIG_XEN_PCIDEV_FRONTEND=y
    CONFIG_HT_IRQ=y
    CONFIG_PCI_ATS=y
    # CONFIG_PCI_IOV is not set
    CONFIG_PCI_PRI=y
    CONFIG_PCI_PASID=y
    # CONFIG_PCI_IOAPIC is not set
    CONFIG_PCI_LABEL=y
    # PCI host controller drivers
    CONFIG_ISA_DMA_API=y
    CONFIG_AMD_NB=y
    CONFIG_PCCARD=y
    CONFIG_PCMCIA=y
    CONFIG_PCMCIA_LOAD_CIS=y
    CONFIG_CARDBUS=y
    # PC-card bridges
    CONFIG_YENTA=y
    CONFIG_YENTA_O2=y
    CONFIG_YENTA_RICOH=y
    CONFIG_YENTA_TI=y
    CONFIG_YENTA_ENE_TUNE=y
    CONFIG_YENTA_TOSHIBA=y
    # CONFIG_PD6729 is not set
    # CONFIG_I82092 is not set
    CONFIG_PCCARD_NONSTATIC=y
    # CONFIG_HOTPLUG_PCI is not set
    # CONFIG_RAPIDIO is not set
    CONFIG_X86_SYSFB=y
    # Executable file formats / Emulations
    CONFIG_BINFMT_ELF=y
    CONFIG_COMPAT_BINFMT_ELF=y
    CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
    CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
    CONFIG_BINFMT_SCRIPT=y
    # CONFIG_HAVE_AOUT is not set
    CONFIG_BINFMT_MISC=y
    CONFIG_COREDUMP=y
    CONFIG_IA32_EMULATION=y
    # CONFIG_IA32_AOUT is not set
    CONFIG_X86_X32=y
    CONFIG_COMPAT=y
    CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
    CONFIG_SYSVIPC_COMPAT=y
    CONFIG_KEYS_COMPAT=y
    CONFIG_X86_DEV_DMA_OPS=y
    CONFIG_IOSF_MBI=m
    CONFIG_PMC_ATOM=y
    CONFIG_NET=y
    CONFIG_COMPAT_NETLINK_MESSAGES=y
    # Networking options
    CONFIG_PACKET=y
    # CONFIG_PACKET_DIAG is not set
    CONFIG_UNIX=y
    # CONFIG_UNIX_DIAG is not set
    CONFIG_XFRM=y
    CONFIG_XFRM_ALGO=y
    CONFIG_XFRM_USER=y
    # CONFIG_XFRM_SUB_POLICY is not set
    # CONFIG_XFRM_MIGRATE is not set
    # CONFIG_XFRM_STATISTICS is not set
    CONFIG_XFRM_IPCOMP=m
    # CONFIG_NET_KEY is not set
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    CONFIG_IP_ADVANCED_ROUTER=y
    # CONFIG_IP_FIB_TRIE_STATS is not set
    CONFIG_IP_MULTIPLE_TABLES=y
    CONFIG_IP_ROUTE_MULTIPATH=y
    CONFIG_IP_ROUTE_VERBOSE=y
    CONFIG_IP_ROUTE_CLASSID=y
    CONFIG_IP_PNP=y
    CONFIG_IP_PNP_DHCP=y
    CONFIG_IP_PNP_BOOTP=y
    CONFIG_IP_PNP_RARP=y
    # CONFIG_NET_IPIP is not set
    # CONFIG_NET_IPGRE_DEMUX is not set
    CONFIG_NET_IP_TUNNEL=y
    CONFIG_IP_MROUTE=y
    # CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
    CONFIG_IP_PIMSM_V1=y
    CONFIG_IP_PIMSM_V2=y
    CONFIG_SYN_COOKIES=y
    CONFIG_NET_IPVTI=m
    # CONFIG_NET_UDP_TUNNEL is not set
    CONFIG_INET_AH=m
    CONFIG_INET_ESP=m
    CONFIG_INET_IPCOMP=m
    CONFIG_INET_XFRM_TUNNEL=m
    CONFIG_INET_TUNNEL=y
    CONFIG_INET_XFRM_MODE_TRANSPORT=m
    CONFIG_INET_XFRM_MODE_TUNNEL=m
    CONFIG_INET_XFRM_MODE_BEET=m
    CONFIG_INET_LRO=y
    CONFIG_INET_DIAG=m
    CONFIG_INET_TCP_DIAG=m
    CONFIG_INET_UDP_DIAG=m
    CONFIG_TCP_CONG_ADVANCED=y
    # CONFIG_TCP_CONG_BIC is not set
    # CONFIG_TCP_CONG_CUBIC is not set
    # CONFIG_TCP_CONG_WESTWOOD is not set
    # CONFIG_TCP_CONG_HTCP is not set
    # CONFIG_TCP_CONG_HSTCP is not set
    # CONFIG_TCP_CONG_HYBLA is not set
    CONFIG_TCP_CONG_VEGAS=y
    # CONFIG_TCP_CONG_SCALABLE is not set
    # CONFIG_TCP_CONG_LP is not set
    # CONFIG_TCP_CONG_VENO is not set
    # CONFIG_TCP_CONG_YEAH is not set
    # CONFIG_TCP_CONG_ILLINOIS is not set
    CONFIG_DEFAULT_VEGAS=y
    # CONFIG_DEFAULT_RENO is not set
    CONFIG_DEFAULT_TCP_CONG="vegas"
    CONFIG_TCP_MD5SIG=y
    CONFIG_IPV6=y
    # CONFIG_IPV6_ROUTER_PREF is not set
    # CONFIG_IPV6_OPTIMISTIC_DAD is not set
    CONFIG_INET6_AH=y
    CONFIG_INET6_ESP=y
    # CONFIG_INET6_IPCOMP is not set
    # CONFIG_IPV6_MIP6 is not set
    # CONFIG_INET6_XFRM_TUNNEL is not set
    # CONFIG_INET6_TUNNEL is not set
    CONFIG_INET6_XFRM_MODE_TRANSPORT=y
    CONFIG_INET6_XFRM_MODE_TUNNEL=y
    CONFIG_INET6_XFRM_MODE_BEET=y
    # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
    # CONFIG_IPV6_VTI is not set
    CONFIG_IPV6_SIT=y
    # CONFIG_IPV6_SIT_6RD is not set
    CONFIG_IPV6_NDISC_NODETYPE=y
    # CONFIG_IPV6_TUNNEL is not set
    # CONFIG_IPV6_GRE is not set
    # CONFIG_IPV6_MULTIPLE_TABLES is not set
    # CONFIG_IPV6_MROUTE is not set
    CONFIG_NETLABEL=y
    CONFIG_NETWORK_SECMARK=y
    CONFIG_NET_PTP_CLASSIFY=y
    # CONFIG_NETWORK_PHY_TIMESTAMPING is not set
    CONFIG_NETFILTER=y
    # CONFIG_NETFILTER_DEBUG is not set
    CONFIG_NETFILTER_ADVANCED=y
    CONFIG_BRIDGE_NETFILTER=y
    # Core Netfilter Configuration
    CONFIG_NETFILTER_NETLINK=y
    CONFIG_NETFILTER_NETLINK_ACCT=m
    # CONFIG_NETFILTER_NETLINK_QUEUE is not set
    CONFIG_NETFILTER_NETLINK_LOG=y
    CONFIG_NF_CONNTRACK=y
    CONFIG_NF_LOG_COMMON=m
    CONFIG_NF_CONNTRACK_MARK=y
    CONFIG_NF_CONNTRACK_SECMARK=y
    CONFIG_NF_CONNTRACK_PROCFS=y
    # CONFIG_NF_CONNTRACK_EVENTS is not set
    # CONFIG_NF_CONNTRACK_TIMEOUT is not set
    # CONFIG_NF_CONNTRACK_TIMESTAMP is not set
    CONFIG_NF_CONNTRACK_LABELS=y
    CONFIG_NF_CT_PROTO_DCCP=m
    CONFIG_NF_CT_PROTO_GRE=m
    CONFIG_NF_CT_PROTO_SCTP=m
    CONFIG_NF_CT_PROTO_UDPLITE=m
    CONFIG_NF_CONNTRACK_AMANDA=m
    CONFIG_NF_CONNTRACK_FTP=m
    CONFIG_NF_CONNTRACK_H323=m
    CONFIG_NF_CONNTRACK_IRC=m
    CONFIG_NF_CONNTRACK_BROADCAST=m
    CONFIG_NF_CONNTRACK_NETBIOS_NS=m
    CONFIG_NF_CONNTRACK_SNMP=m
    CONFIG_NF_CONNTRACK_PPTP=m
    CONFIG_NF_CONNTRACK_SANE=m
    CONFIG_NF_CONNTRACK_SIP=m
    CONFIG_NF_CONNTRACK_TFTP=m
    CONFIG_NF_CT_NETLINK=y
    CONFIG_NF_CT_NETLINK_TIMEOUT=m
    CONFIG_NF_NAT=m
    CONFIG_NF_NAT_NEEDED=y
    CONFIG_NF_NAT_PROTO_DCCP=m
    CONFIG_NF_NAT_PROTO_UDPLITE=m
    CONFIG_NF_NAT_PROTO_SCTP=m
    CONFIG_NF_NAT_AMANDA=m
    CONFIG_NF_NAT_FTP=m
    CONFIG_NF_NAT_IRC=m
    CONFIG_NF_NAT_SIP=m
    CONFIG_NF_NAT_TFTP=m
    CONFIG_NETFILTER_SYNPROXY=m
    CONFIG_NF_TABLES=m
    CONFIG_NF_TABLES_INET=m
    CONFIG_NFT_EXTHDR=m
    CONFIG_NFT_META=m
    CONFIG_NFT_CT=m
    CONFIG_NFT_RBTREE=m
    CONFIG_NFT_HASH=m
    CONFIG_NFT_COUNTER=m
    CONFIG_NFT_LOG=m
    CONFIG_NFT_LIMIT=m
    CONFIG_NFT_NAT=m
    CONFIG_NFT_REJECT=m
    CONFIG_NFT_REJECT_INET=m
    CONFIG_NFT_COMPAT=m
    CONFIG_NETFILTER_XTABLES=y
    # Xtables combined modules
    CONFIG_NETFILTER_XT_MARK=m
    CONFIG_NETFILTER_XT_CONNMARK=m
    # Xtables targets
    # CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
    # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
    # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
    CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
    # CONFIG_NETFILTER_XT_TARGET_CT is not set
    # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
    CONFIG_NETFILTER_XT_TARGET_HL=m
    # CONFIG_NETFILTER_XT_TARGET_HMARK is not set
    # CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
    # CONFIG_NETFILTER_XT_TARGET_LED is not set
    CONFIG_NETFILTER_XT_TARGET_LOG=m
    # CONFIG_NETFILTER_XT_TARGET_MARK is not set
    CONFIG_NETFILTER_XT_NAT=m
    CONFIG_NETFILTER_XT_TARGET_NETMAP=m
    CONFIG_NETFILTER_XT_TARGET_NFLOG=y
    # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
    # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
    CONFIG_NETFILTER_XT_TARGET_RATEEST=m
    CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
    CONFIG_NETFILTER_XT_TARGET_TEE=m
    # CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
    # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
    CONFIG_NETFILTER_XT_TARGET_SECMARK=y
    CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
    # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
    # Xtables matches
    CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
    CONFIG_NETFILTER_XT_MATCH_BPF=m
    CONFIG_NETFILTER_XT_MATCH_CGROUP=m
    CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
    CONFIG_NETFILTER_XT_MATCH_COMMENT=m
    CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
    CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
    CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
    CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
    CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
    CONFIG_NETFILTER_XT_MATCH_CPU=m
    CONFIG_NETFILTER_XT_MATCH_DCCP=m
    CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
    CONFIG_NETFILTER_XT_MATCH_DSCP=m
    CONFIG_NETFILTER_XT_MATCH_ECN=m
    CONFIG_NETFILTER_XT_MATCH_ESP=m
    CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
    CONFIG_NETFILTER_XT_MATCH_HELPER=m
    CONFIG_NETFILTER_XT_MATCH_HL=m
    CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
    CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
    CONFIG_NETFILTER_XT_MATCH_L2TP=m
    CONFIG_NETFILTER_XT_MATCH_LENGTH=m
    CONFIG_NETFILTER_XT_MATCH_LIMIT=m
    CONFIG_NETFILTER_XT_MATCH_MAC=m
    CONFIG_NETFILTER_XT_MATCH_MARK=m
    CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
    CONFIG_NETFILTER_XT_MATCH_NFACCT=m
    CONFIG_NETFILTER_XT_MATCH_OSF=m
    CONFIG_NETFILTER_XT_MATCH_OWNER=m
    CONFIG_NETFILTER_XT_MATCH_POLICY=y
    CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
    CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
    CONFIG_NETFILTER_XT_MATCH_QUOTA=m
    CONFIG_NETFILTER_XT_MATCH_RATEEST=m
    CONFIG_NETFILTER_XT_MATCH_REALM=m
    CONFIG_NETFILTER_XT_MATCH_RECENT=m
    CONFIG_NETFILTER_XT_MATCH_SCTP=m
    CONFIG_NETFILTER_XT_MATCH_SOCKET=m
    CONFIG_NETFILTER_XT_MATCH_STATE=y
    CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
    CONFIG_NETFILTER_XT_MATCH_STRING=m
    CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
    CONFIG_NETFILTER_XT_MATCH_TIME=m
    CONFIG_NETFILTER_XT_MATCH_U32=m
    # CONFIG_IP_SET is not set
    # CONFIG_IP_VS is not set
    # IP: Netfilter Configuration
    CONFIG_NF_DEFRAG_IPV4=y
    CONFIG_NF_CONNTRACK_IPV4=y
    CONFIG_NF_CONNTRACK_PROC_COMPAT=y
    CONFIG_NF_LOG_ARP=m
    CONFIG_NF_LOG_IPV4=m
    CONFIG_NF_TABLES_IPV4=m
    CONFIG_NFT_CHAIN_ROUTE_IPV4=m
    CONFIG_NFT_CHAIN_NAT_IPV4=m
    CONFIG_NFT_REJECT_IPV4=m
    CONFIG_NF_TABLES_ARP=m
    CONFIG_NF_NAT_IPV4=m
    CONFIG_NF_NAT_SNMP_BASIC=m
    CONFIG_NF_NAT_PROTO_GRE=m
    CONFIG_NF_NAT_PPTP=m
    CONFIG_NF_NAT_H323=m
    CONFIG_IP_NF_IPTABLES=y
    # CONFIG_IP_NF_MATCH_AH is not set
    # CONFIG_IP_NF_MATCH_ECN is not set
    # CONFIG_IP_NF_MATCH_RPFILTER is not set
    # CONFIG_IP_NF_MATCH_TTL is not set
    CONFIG_IP_NF_FILTER=y
    CONFIG_IP_NF_TARGET_REJECT=y
    # CONFIG_IP_NF_TARGET_SYNPROXY is not set
    CONFIG_IP_NF_NAT=m
    CONFIG_IP_NF_TARGET_MASQUERADE=m
    # CONFIG_IP_NF_TARGET_NETMAP is not set
    # CONFIG_IP_NF_TARGET_REDIRECT is not set
    CONFIG_IP_NF_MANGLE=y
    # CONFIG_IP_NF_TARGET_CLUSTERIP is not set
    # CONFIG_IP_NF_TARGET_ECN is not set
    # CONFIG_IP_NF_TARGET_TTL is not set
    # CONFIG_IP_NF_RAW is not set
    # CONFIG_IP_NF_SECURITY is not set
    # CONFIG_IP_NF_ARPTABLES is not set
    # IPv6: Netfilter Configuration
    CONFIG_NF_DEFRAG_IPV6=y
    CONFIG_NF_CONNTRACK_IPV6=y
    CONFIG_NF_TABLES_IPV6=m
    CONFIG_NFT_CHAIN_ROUTE_IPV6=m
    CONFIG_NFT_CHAIN_NAT_IPV6=m
    CONFIG_NFT_REJECT_IPV6=m
    CONFIG_NF_LOG_IPV6=m
    CONFIG_NF_NAT_IPV6=m
    CONFIG_IP6_NF_IPTABLES=y
    CONFIG_IP6_NF_MATCH_AH=m
    CONFIG_IP6_NF_MATCH_EUI64=m
    CONFIG_IP6_NF_MATCH_FRAG=m
    CONFIG_IP6_NF_MATCH_OPTS=m
    CONFIG_IP6_NF_MATCH_HL=m
    CONFIG_IP6_NF_MATCH_IPV6HEADER=y
    CONFIG_IP6_NF_MATCH_MH=m
    CONFIG_IP6_NF_MATCH_RPFILTER=m
    CONFIG_IP6_NF_MATCH_RT=m
    CONFIG_IP6_NF_TARGET_HL=m
    CONFIG_IP6_NF_FILTER=y
    CONFIG_IP6_NF_TARGET_REJECT=y
    CONFIG_IP6_NF_TARGET_SYNPROXY=m
    CONFIG_IP6_NF_MANGLE=y
    CONFIG_IP6_NF_RAW=m
    CONFIG_IP6_NF_SECURITY=m
    # CONFIG_IP6_NF_NAT is not set
    CONFIG_NF_TABLES_BRIDGE=m
    CONFIG_NFT_BRIDGE_META=m
    CONFIG_NFT_BRIDGE_REJECT=m
    CONFIG_NF_LOG_BRIDGE=m
    CONFIG_BRIDGE_NF_EBTABLES=m
    CONFIG_BRIDGE_EBT_BROUTE=m
    CONFIG_BRIDGE_EBT_T_FILTER=m
    CONFIG_BRIDGE_EBT_T_NAT=m
    CONFIG_BRIDGE_EBT_802_3=m
    CONFIG_BRIDGE_EBT_AMONG=m
    CONFIG_BRIDGE_EBT_ARP=m
    CONFIG_BRIDGE_EBT_IP=m
    CONFIG_BRIDGE_EBT_IP6=m
    CONFIG_BRIDGE_EBT_LIMIT=m
    CONFIG_BRIDGE_EBT_MARK=m
    CONFIG_BRIDGE_EBT_PKTTYPE=m
    CONFIG_BRIDGE_EBT_STP=m
    CONFIG_BRIDGE_EBT_VLAN=m
    CONFIG_BRIDGE_EBT_ARPREPLY=m
    CONFIG_BRIDGE_EBT_DNAT=m
    CONFIG_BRIDGE_EBT_MARK_T=m
    CONFIG_BRIDGE_EBT_REDIRECT=m
    CONFIG_BRIDGE_EBT_SNAT=m
    CONFIG_BRIDGE_EBT_LOG=m
    CONFIG_BRIDGE_EBT_NFLOG=m
    # CONFIG_IP_DCCP is not set
    # CONFIG_IP_SCTP is not set
    # CONFIG_RDS is not set
    # CONFIG_TIPC is not set
    # CONFIG_ATM is not set
    # CONFIG_L2TP is not set
    CONFIG_STP=m
    CONFIG_GARP=m
    CONFIG_MRP=m
    CONFIG_BRIDGE=m
    CONFIG_BRIDGE_IGMP_SNOOPING=y
    CONFIG_BRIDGE_VLAN_FILTERING=y
    CONFIG_HAVE_NET_DSA=y
    CONFIG_VLAN_8021Q=m
    CONFIG_VLAN_8021Q_GVRP=y
    CONFIG_VLAN_8021Q_MVRP=y
    # CONFIG_DECNET is not set
    CONFIG_LLC=m
    # CONFIG_LLC2 is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_PHONET is not set
    # CONFIG_6LOWPAN is not set
    # CONFIG_IEEE802154 is not set
    CONFIG_NET_SCHED=y
    # Queueing/Scheduling
    # CONFIG_NET_SCH_CBQ is not set
    # CONFIG_NET_SCH_HTB is not set
    # CONFIG_NET_SCH_HFSC is not set
    # CONFIG_NET_SCH_PRIO is not set
    # CONFIG_NET_SCH_MULTIQ is not set
    # CONFIG_NET_SCH_RED is not set
    # CONFIG_NET_SCH_SFB is not set
    # CONFIG_NET_SCH_SFQ is not set
    # CONFIG_NET_SCH_TEQL is not set
    # CONFIG_NET_SCH_TBF is not set
    # CONFIG_NET_SCH_GRED is not set
    # CONFIG_NET_SCH_DSMARK is not set
    # CONFIG_NET_SCH_NETEM is not set
    # CONFIG_NET_SCH_DRR is not set
    # CONFIG_NET_SCH_MQPRIO is not set
    # CONFIG_NET_SCH_CHOKE is not set
    # CONFIG_NET_SCH_QFQ is not set
    # CONFIG_NET_SCH_CODEL is not set
    # CONFIG_NET_SCH_FQ_CODEL is not set
    CONFIG_NET_SCH_FQ=m
    # CONFIG_NET_SCH_HHF is not set
    # CONFIG_NET_SCH_PIE is not set
    # CONFIG_NET_SCH_INGRESS is not set
    # CONFIG_NET_SCH_PLUG is not set
    # Classification
    CONFIG_NET_CLS=y
    # CONFIG_NET_CLS_BASIC is not set
    # CONFIG_NET_CLS_TCINDEX is not set
    # CONFIG_NET_CLS_ROUTE4 is not set
    # CONFIG_NET_CLS_FW is not set
    # CONFIG_NET_CLS_U32 is not set
    # CONFIG_NET_CLS_RSVP is not set
    # CONFIG_NET_CLS_RSVP6 is not set
    # CONFIG_NET_CLS_FLOW is not set
    # CONFIG_NET_CLS_CGROUP is not set
    CONFIG_NET_CLS_BPF=m
    CONFIG_NET_EMATCH=y
    CONFIG_NET_EMATCH_STACK=32
    # CONFIG_NET_EMATCH_CMP is not set
    # CONFIG_NET_EMATCH_NBYTE is not set
    # CONFIG_NET_EMATCH_U32 is not set
    # CONFIG_NET_EMATCH_META is not set
    # CONFIG_NET_EMATCH_TEXT is not set
    CONFIG_NET_CLS_ACT=y
    # CONFIG_NET_ACT_POLICE is not set
    # CONFIG_NET_ACT_GACT is not set
    # CONFIG_NET_ACT_MIRRED is not set
    # CONFIG_NET_ACT_IPT is not set
    # CONFIG_NET_ACT_NAT is not set
    # CONFIG_NET_ACT_PEDIT is not set
    # CONFIG_NET_ACT_SIMP is not set
    # CONFIG_NET_ACT_SKBEDIT is not set
    # CONFIG_NET_ACT_CSUM is not set
    CONFIG_NET_SCH_FIFO=y
    # CONFIG_DCB is not set
    CONFIG_DNS_RESOLVER=y
    # CONFIG_BATMAN_ADV is not set
    # CONFIG_OPENVSWITCH is not set
    # CONFIG_VSOCKETS is not set
    # CONFIG_NETLINK_MMAP is not set
    # CONFIG_NETLINK_DIAG is not set
    # CONFIG_NET_MPLS_GSO is not set
    # CONFIG_HSR is not set
    CONFIG_RPS=y
    CONFIG_RFS_ACCEL=y
    CONFIG_XPS=y
    # CONFIG_CGROUP_NET_PRIO is not set
    CONFIG_CGROUP_NET_CLASSID=y
    CONFIG_NET_RX_BUSY_POLL=y
    CONFIG_BQL=y
    # CONFIG_BPF_JIT is not set
    CONFIG_NET_FLOW_LIMIT=y
    # Network testing
    # CONFIG_NET_PKTGEN is not set
    # CONFIG_NET_TCPPROBE is not set
    # CONFIG_NET_DROP_MONITOR is not set
    # CONFIG_HAMRADIO is not set
    # CONFIG_CAN is not set
    # CONFIG_IRDA is not set
    CONFIG_BT=m
    CONFIG_BT_RFCOMM=m
    CONFIG_BT_RFCOMM_TTY=y
    CONFIG_BT_BNEP=m
    CONFIG_BT_BNEP_MC_FILTER=y
    CONFIG_BT_BNEP_PROTO_FILTER=y
    CONFIG_BT_HIDP=m
    # Bluetooth device drivers
    CONFIG_BT_HCIBTUSB=m
    CONFIG_BT_HCIBTSDIO=m
    CONFIG_BT_HCIUART=m
    CONFIG_BT_HCIUART_H4=y
    CONFIG_BT_HCIUART_BCSP=y
    CONFIG_BT_HCIUART_ATH3K=y
    CONFIG_BT_HCIUART_LL=y
    CONFIG_BT_HCIUART_3WIRE=y
    CONFIG_BT_HCIBCM203X=m
    CONFIG_BT_HCIBPA10X=m
    CONFIG_BT_HCIBFUSB=m
    CONFIG_BT_HCIDTL1=m
    CONFIG_BT_HCIBT3C=m
    CONFIG_BT_HCIBLUECARD=m
    CONFIG_BT_HCIBTUART=m
    CONFIG_BT_HCIVHCI=m
    CONFIG_BT_MRVL=m
    CONFIG_BT_MRVL_SDIO=m
    CONFIG_BT_ATH3K=m
    # CONFIG_AF_RXRPC is not set
    CONFIG_FIB_RULES=y
    CONFIG_WIRELESS=y
    CONFIG_WEXT_CORE=y
    CONFIG_WEXT_PROC=y
    CONFIG_CFG80211=y
    # CONFIG_NL80211_TESTMODE is not set
    # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
    # CONFIG_CFG80211_REG_DEBUG is not set
    CONFIG_CFG80211_DEFAULT_PS=y
    # CONFIG_CFG80211_DEBUGFS is not set
    # CONFIG_CFG80211_INTERNAL_REGDB is not set
    CONFIG_CFG80211_WEXT=y
    # CONFIG_LIB80211 is not set
    CONFIG_MAC80211=y
    CONFIG_MAC80211_HAS_RC=y
    CONFIG_MAC80211_RC_MINSTREL=y
    CONFIG_MAC80211_RC_MINSTREL_HT=y
    CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
    CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
    # CONFIG_MAC80211_MESH is not set
    CONFIG_MAC80211_LEDS=y
    # CONFIG_MAC80211_DEBUGFS is not set
    # CONFIG_MAC80211_MESSAGE_TRACING is not set
    # CONFIG_MAC80211_DEBUG_MENU is not set
    # CONFIG_WIMAX is not set
    CONFIG_RFKILL=y
    CONFIG_RFKILL_LEDS=y
    CONFIG_RFKILL_INPUT=y
    # CONFIG_NET_9P is not set
    # CONFIG_CAIF is not set
    # CONFIG_CEPH_LIB is not set
    # CONFIG_NFC is not set
    CONFIG_HAVE_BPF_JIT=y
    # Device Drivers
    # Generic Driver Options
    CONFIG_UEVENT_HELPER=y
    CONFIG_UEVENT_HELPER_PATH=""
    CONFIG_DEVTMPFS=y
    # CONFIG_DEVTMPFS_MOUNT is not set
    # CONFIG_STANDALONE is not set
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    CONFIG_FW_LOADER=y
    # CONFIG_FIRMWARE_IN_KERNEL is not set
    CONFIG_EXTRA_FIRMWARE="iwlwifi-6000-4.ucode"
    CONFIG_EXTRA_FIRMWARE_DIR="firmware"
    # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
    # CONFIG_DEBUG_DRIVER is not set
    # CONFIG_DEBUG_DEVRES is not set
    CONFIG_SYS_HYPERVISOR=y
    # CONFIG_GENERIC_CPU_DEVICES is not set
    CONFIG_GENERIC_CPU_AUTOPROBE=y
    CONFIG_REGMAP=y
    CONFIG_REGMAP_I2C=m
    CONFIG_DMA_SHARED_BUFFER=y
    # CONFIG_FENCE_TRACE is not set
    # Bus devices
    CONFIG_CONNECTOR=y
    CONFIG_PROC_EVENTS=y
    # CONFIG_MTD is not set
    CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
    # CONFIG_PARPORT is not set
    CONFIG_PNP=y
    CONFIG_PNP_DEBUG_MESSAGES=y
    # Protocols
    CONFIG_PNPACPI=y
    CONFIG_BLK_DEV=y
    # CONFIG_BLK_DEV_NULL_BLK is not set
    # CONFIG_BLK_DEV_FD is not set
    # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
    # CONFIG_ZRAM is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    # CONFIG_BLK_DEV_COW_COMMON is not set
    CONFIG_BLK_DEV_LOOP=y
    CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
    # CONFIG_BLK_DEV_CRYPTOLOOP is not set
    # CONFIG_BLK_DEV_DRBD is not set
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_NVME is not set
    # CONFIG_BLK_DEV_SKD is not set
    # CONFIG_BLK_DEV_SX8 is not set
    CONFIG_BLK_DEV_RAM=y
    CONFIG_BLK_DEV_RAM_COUNT=16
    CONFIG_BLK_DEV_RAM_SIZE=4096
    # CONFIG_BLK_DEV_XIP is not set
    # CONFIG_CDROM_PKTCDVD is not set
    # CONFIG_ATA_OVER_ETH is not set
    CONFIG_XEN_BLKDEV_FRONTEND=y
    # CONFIG_XEN_BLKDEV_BACKEND is not set
    # CONFIG_VIRTIO_BLK is not set
    # CONFIG_BLK_DEV_HD is not set
    # CONFIG_BLK_DEV_RBD is not set
    # CONFIG_BLK_DEV_RSXX is not set
    # Misc devices
    # CONFIG_SENSORS_LIS3LV02D is not set
    # CONFIG_AD525X_DPOT is not set
    # CONFIG_DUMMY_IRQ is not set
    # CONFIG_IBM_ASM is not set
    # CONFIG_PHANTOM is not set
    # CONFIG_SGI_IOC4 is not set
    CONFIG_TIFM_CORE=m
    CONFIG_TIFM_7XX1=m
    # CONFIG_ICS932S401 is not set
    # CONFIG_ENCLOSURE_SERVICES is not set
    # CONFIG_HP_ILO is not set
    # CONFIG_APDS9802ALS is not set
    # CONFIG_ISL29003 is not set
    # CONFIG_ISL29020 is not set
    # CONFIG_SENSORS_TSL2550 is not set
    # CONFIG_SENSORS_BH1780 is not set
    # CONFIG_SENSORS_BH1770 is not set
    # CONFIG_SENSORS_APDS990X is not set
    # CONFIG_HMC6352 is not set
    # CONFIG_DS1682 is not set
    # CONFIG_VMWARE_BALLOON is not set
    # CONFIG_BMP085_I2C is not set
    # CONFIG_USB_SWITCH_FSA9480 is not set
    # CONFIG_SRAM is not set
    # CONFIG_C2PORT is not set
    # EEPROM support
    # CONFIG_EEPROM_AT24 is not set
    # CONFIG_EEPROM_LEGACY is not set
    # CONFIG_EEPROM_MAX6875 is not set
    CONFIG_EEPROM_93CX6=m
    CONFIG_CB710_CORE=m
    # CONFIG_CB710_DEBUG is not set
    CONFIG_CB710_DEBUG_ASSUMPTIONS=y
    # Texas Instruments shared transport line discipline
    # CONFIG_SENSORS_LIS3_I2C is not set
    # Altera FPGA firmware download module
    # CONFIG_ALTERA_STAPL is not set
    # CONFIG_VMWARE_VMCI is not set
    # Intel MIC Bus Driver
    # CONFIG_INTEL_MIC_BUS is not set
    # Intel MIC Host Driver
    # Intel MIC Card Driver
    # CONFIG_GENWQE is not set
    # CONFIG_ECHO is not set
    CONFIG_HAVE_IDE=y
    # CONFIG_IDE is not set
    # SCSI device support
    CONFIG_SCSI_MOD=y
    # CONFIG_RAID_ATTRS is not set
    CONFIG_SCSI=y
    CONFIG_SCSI_DMA=y
    # CONFIG_SCSI_NETLINK is not set
    CONFIG_SCSI_PROC_FS=y
    # SCSI support type (disk, tape, CD-ROM)
    CONFIG_BLK_DEV_SD=y
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_CHR_DEV_OSST is not set
    CONFIG_BLK_DEV_SR=y
    CONFIG_BLK_DEV_SR_VENDOR=y
    CONFIG_CHR_DEV_SG=y
    # CONFIG_CHR_DEV_SCH is not set
    CONFIG_SCSI_CONSTANTS=y
    # CONFIG_SCSI_LOGGING is not set
    # CONFIG_SCSI_SCAN_ASYNC is not set
    # SCSI Transports
    CONFIG_SCSI_SPI_ATTRS=y
    # CONFIG_SCSI_FC_ATTRS is not set
    # CONFIG_SCSI_ISCSI_ATTRS is not set
    # CONFIG_SCSI_SAS_ATTRS is not set
    # CONFIG_SCSI_SAS_LIBSAS is not set
    # CONFIG_SCSI_SRP_ATTRS is not set
    # CONFIG_SCSI_LOWLEVEL is not set
    # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
    # CONFIG_SCSI_DH is not set
    # CONFIG_SCSI_OSD_INITIATOR is not set
    CONFIG_ATA=y
    # CONFIG_ATA_NONSTANDARD is not set
    CONFIG_ATA_VERBOSE_ERROR=y
    CONFIG_ATA_ACPI=y
    # CONFIG_SATA_ZPODD is not set
    CONFIG_SATA_PMP=y
    # Controllers with non-SFF native interface
    CONFIG_SATA_AHCI=y
    # CONFIG_SATA_AHCI_PLATFORM is not set
    # CONFIG_SATA_INIC162X is not set
    # CONFIG_SATA_ACARD_AHCI is not set
    # CONFIG_SATA_SIL24 is not set
    CONFIG_ATA_SFF=y
    # SFF controllers with custom DMA interface
    # CONFIG_PDC_ADMA is not set
    # CONFIG_SATA_QSTOR is not set
    # CONFIG_SATA_SX4 is not set
    CONFIG_ATA_BMDMA=y
    # SATA SFF controllers with BMDMA
    CONFIG_ATA_PIIX=y
    # CONFIG_SATA_MV is not set
    # CONFIG_SATA_NV is not set
    # CONFIG_SATA_PROMISE is not set
    # CONFIG_SATA_SIL is not set
    # CONFIG_SATA_SIS is not set
    # CONFIG_SATA_SVW is not set
    # CONFIG_SATA_ULI is not set
    # CONFIG_SATA_VIA is not set
    # CONFIG_SATA_VITESSE is not set
    # PATA SFF controllers with BMDMA
    # CONFIG_PATA_ALI is not set
    CONFIG_PATA_AMD=y
    # CONFIG_PATA_ARTOP is not set
    # CONFIG_PATA_ATIIXP is not set
    # CONFIG_PATA_ATP867X is not set
    # CONFIG_PATA_CMD64X is not set
    # CONFIG_PATA_CYPRESS is not set
    # CONFIG_PATA_EFAR is not set
    # CONFIG_PATA_HPT366 is not set
    # CONFIG_PATA_HPT37X is not set
    # CONFIG_PATA_HPT3X2N is not set
    # CONFIG_PATA_HPT3X3 is not set
    # CONFIG_PATA_IT8213 is not set
    # CONFIG_PATA_IT821X is not set
    # CONFIG_PATA_JMICRON is not set
    # CONFIG_PATA_MARVELL is not set
    # CONFIG_PATA_NETCELL is not set
    # CONFIG_PATA_NINJA32 is not set
    # CONFIG_PATA_NS87415 is not set
    CONFIG_PATA_OLDPIIX=y
    # CONFIG_PATA_OPTIDMA is not set
    # CONFIG_PATA_PDC2027X is not set
    # CONFIG_PATA_PDC_OLD is not set
    # CONFIG_PATA_RADISYS is not set
    # CONFIG_PATA_RDC is not set
    CONFIG_PATA_SCH=y
    # CONFIG_PATA_SERVERWORKS is not set
    # CONFIG_PATA_SIL680 is not set
    # CONFIG_PATA_SIS is not set
    # CONFIG_PATA_TOSHIBA is not set
    # CONFIG_PATA_TRIFLEX is not set
    # CONFIG_PATA_VIA is not set
    # CONFIG_PATA_WINBOND is not set
    # PIO-only SFF controllers
    # CONFIG_PATA_CMD640_PCI is not set
    # CONFIG_PATA_MPIIX is not set
    # CONFIG_PATA_NS87410 is not set
    # CONFIG_PATA_OPTI is not set
    # CONFIG_PATA_PCMCIA is not set
    # CONFIG_PATA_RZ1000 is not set
    # Generic fallback / legacy drivers
    # CONFIG_PATA_ACPI is not set
    # CONFIG_ATA_GENERIC is not set
    # CONFIG_PATA_LEGACY is not set
    CONFIG_MD=y
    CONFIG_BLK_DEV_MD=y
    CONFIG_MD_AUTODETECT=y
    # CONFIG_MD_LINEAR is not set
    # CONFIG_MD_RAID0 is not set
    # CONFIG_MD_RAID1 is not set
    # CONFIG_MD_RAID10 is not set
    # CONFIG_MD_RAID456 is not set
    # CONFIG_MD_MULTIPATH is not set
    # CONFIG_MD_FAULTY is not set
    CONFIG_BCACHE=m
    # CONFIG_BCACHE_DEBUG is not set
    # CONFIG_BCACHE_CLOSURES_DEBUG is not set
    CONFIG_BLK_DEV_DM_BUILTIN=y
    CONFIG_BLK_DEV_DM=y
    # CONFIG_DM_DEBUG is not set
    CONFIG_DM_CRYPT=y
    # CONFIG_DM_SNAPSHOT is not set
    # CONFIG_DM_THIN_PROVISIONING is not set
    # CONFIG_DM_CACHE is not set
    # CONFIG_DM_ERA is not set
    CONFIG_DM_MIRROR=y
    # CONFIG_DM_LOG_USERSPACE is not set
    # CONFIG_DM_RAID is not set
    CONFIG_DM_ZERO=y
    # CONFIG_DM_MULTIPATH is not set
    # CONFIG_DM_DELAY is not set
    # CONFIG_DM_UEVENT is not set
    # CONFIG_DM_FLAKEY is not set
    # CONFIG_DM_VERITY is not set
    # CONFIG_DM_SWITCH is not set
    # CONFIG_TARGET_CORE is not set
    # CONFIG_FUSION is not set
    # IEEE 1394 (FireWire) support
    # CONFIG_FIREWIRE is not set
    # CONFIG_FIREWIRE_NOSY is not set
    # CONFIG_I2O is not set
    # CONFIG_MACINTOSH_DRIVERS is not set
    CONFIG_NETDEVICES=y
    CONFIG_MII=m
    CONFIG_NET_CORE=y
    CONFIG_BONDING=m
    CONFIG_DUMMY=m
    # CONFIG_EQUALIZER is not set
    # CONFIG_NET_FC is not set
    # CONFIG_IFB is not set
    # CONFIG_NET_TEAM is not set
    # CONFIG_MACVLAN is not set
    # CONFIG_VXLAN is not set
    CONFIG_NETCONSOLE=y
    CONFIG_NETPOLL=y
    CONFIG_NET_POLL_CONTROLLER=y
    CONFIG_TUN=y
    # CONFIG_VETH is not set
    # CONFIG_VIRTIO_NET is not set
    # CONFIG_NLMON is not set
    # CONFIG_ARCNET is not set
    # CAIF transport drivers
    CONFIG_VHOST_NET=m
    CONFIG_VHOST_RING=m
    CONFIG_VHOST=m
    # Distributed Switch Architecture drivers
    # CONFIG_NET_DSA_MV88E6XXX is not set
    # CONFIG_NET_DSA_MV88E6060 is not set
    # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
    # CONFIG_NET_DSA_MV88E6131 is not set
    # CONFIG_NET_DSA_MV88E6123_61_65 is not set
    CONFIG_ETHERNET=y
    # CONFIG_NET_VENDOR_3COM is not set
    # CONFIG_NET_VENDOR_ADAPTEC is not set
    # CONFIG_NET_VENDOR_ALTEON is not set
    # CONFIG_ALTERA_TSE is not set
    # CONFIG_NET_VENDOR_AMD is not set
    # CONFIG_NET_XGENE is not set
    CONFIG_NET_VENDOR_ARC=y
    # CONFIG_NET_VENDOR_ATHEROS is not set
    # CONFIG_NET_VENDOR_BROADCOM is not set
    # CONFIG_NET_VENDOR_BROCADE is not set
    # CONFIG_NET_VENDOR_CHELSIO is not set
    # CONFIG_NET_VENDOR_CISCO is not set
    # CONFIG_CX_ECAT is not set
    # CONFIG_DNET is not set
    # CONFIG_NET_VENDOR_DEC is not set
    # CONFIG_NET_VENDOR_DLINK is not set
    # CONFIG_NET_VENDOR_EMULEX is not set
    # CONFIG_NET_VENDOR_EXAR is not set
    # CONFIG_NET_VENDOR_FUJITSU is not set
    # CONFIG_NET_VENDOR_HP is not set
    CONFIG_NET_VENDOR_INTEL=y
    # CONFIG_E100 is not set
    # CONFIG_E1000 is not set
    CONFIG_E1000E=y
    # CONFIG_IGB is not set
    # CONFIG_IGBVF is not set
    # CONFIG_IXGB is not set
    # CONFIG_IXGBE is not set
    # CONFIG_IXGBEVF is not set
    # CONFIG_I40E is not set
    # CONFIG_I40EVF is not set
    # CONFIG_NET_VENDOR_I825XX is not set
    # CONFIG_IP1000 is not set
    # CONFIG_JME is not set
    # CONFIG_NET_VENDOR_MARVELL is not set
    # CONFIG_NET_VENDOR_MELLANOX is not set
    # CONFIG_NET_VENDOR_MICREL is not set
    # CONFIG_NET_VENDOR_MYRI is not set
    # CONFIG_FEALNX is not set
    # CONFIG_NET_VENDOR_NATSEMI is not set
    # CONFIG_NET_VENDOR_NVIDIA is not set
    # CONFIG_NET_VENDOR_OKI is not set
    # CONFIG_ETHOC is not set
    # CONFIG_NET_PACKET_ENGINE is not set
    # CONFIG_NET_VENDOR_QLOGIC is not set
    # CONFIG_NET_VENDOR_REALTEK is not set
    # CONFIG_NET_VENDOR_RDC is not set
    # CONFIG_NET_VENDOR_SAMSUNG is not set
    # CONFIG_NET_VENDOR_SEEQ is not set
    # CONFIG_NET_VENDOR_SILAN is not set
    # CONFIG_NET_VENDOR_SIS is not set
    # CONFIG_SFC is not set
    # CONFIG_NET_VENDOR_SMSC is not set
    # CONFIG_NET_VENDOR_STMICRO is not set
    # CONFIG_NET_VENDOR_SUN is not set
    # CONFIG_NET_VENDOR_TEHUTI is not set
    # CONFIG_NET_VENDOR_TI is not set
    # CONFIG_NET_VENDOR_VIA is not set
    # CONFIG_NET_VENDOR_WIZNET is not set
    # CONFIG_NET_VENDOR_XIRCOM is not set
    CONFIG_FDDI=y
    # CONFIG_DEFXX is not set
    # CONFIG_SKFP is not set
    # CONFIG_HIPPI is not set
    # CONFIG_NET_SB1000 is not set
    CONFIG_PHYLIB=y
    # MII PHY device drivers
    # CONFIG_AT803X_PHY is not set
    # CONFIG_AMD_PHY is not set
    # CONFIG_MARVELL_PHY is not set
    # CONFIG_DAVICOM_PHY is not set
    # CONFIG_QSEMI_PHY is not set
    # CONFIG_LXT_PHY is not set
    # CONFIG_CICADA_PHY is not set
    # CONFIG_VITESSE_PHY is not set
    # CONFIG_SMSC_PHY is not set
    # CONFIG_BROADCOM_PHY is not set
    # CONFIG_BCM7XXX_PHY is not set
    # CONFIG_BCM87XX_PHY is not set
    # CONFIG_ICPLUS_PHY is not set
    # CONFIG_REALTEK_PHY is not set
    # CONFIG_NATIONAL_PHY is not set
    # CONFIG_STE10XP is not set
    # CONFIG_LSI_ET1011C_PHY is not set
    # CONFIG_MICREL_PHY is not set
    # CONFIG_FIXED_PHY is not set
    # CONFIG_MDIO_BITBANG is not set
    # CONFIG_PPP is not set
    # CONFIG_SLIP is not set
    CONFIG_USB_NET_DRIVERS=y
    # CONFIG_USB_CATC is not set
    # CONFIG_USB_KAWETH is not set
    # CONFIG_USB_PEGASUS is not set
    # CONFIG_USB_RTL8150 is not set
    # CONFIG_USB_RTL8152 is not set
    CONFIG_USB_USBNET=m
    CONFIG_USB_NET_AX8817X=m
    CONFIG_USB_NET_AX88179_178A=m
    CONFIG_USB_NET_CDCETHER=m
    CONFIG_USB_NET_CDC_EEM=m
    CONFIG_USB_NET_CDC_NCM=m
    # CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
    CONFIG_USB_NET_CDC_MBIM=m
    CONFIG_USB_NET_DM9601=m
    # CONFIG_USB_NET_SR9700 is not set
    # CONFIG_USB_NET_SR9800 is not set
    CONFIG_USB_NET_SMSC75XX=m
    CONFIG_USB_NET_SMSC95XX=m
    CONFIG_USB_NET_GL620A=m
    CONFIG_USB_NET_NET1080=m
    CONFIG_USB_NET_PLUSB=m
    CONFIG_USB_NET_MCS7830=m
    CONFIG_USB_NET_RNDIS_HOST=m
    CONFIG_USB_NET_CDC_SUBSET=m
    CONFIG_USB_ALI_M5632=y
    CONFIG_USB_AN2720=y
    CONFIG_USB_BELKIN=y
    CONFIG_USB_ARMLINUX=y
    CONFIG_USB_EPSON2888=y
    CONFIG_USB_KC2190=y
    CONFIG_USB_NET_ZAURUS=m
    CONFIG_USB_NET_CX82310_ETH=m
    CONFIG_USB_NET_KALMIA=m
    CONFIG_USB_NET_QMI_WWAN=m
    # CONFIG_USB_HSO is not set
    # CONFIG_USB_NET_INT51X1 is not set
    # CONFIG_USB_IPHETH is not set
    # CONFIG_USB_SIERRA_NET is not set
    # CONFIG_USB_VL600 is not set
    CONFIG_WLAN=y
    # CONFIG_PCMCIA_RAYCS is not set
    # CONFIG_LIBERTAS_THINFIRM is not set
    # CONFIG_AIRO is not set
    # CONFIG_ATMEL is not set
    # CONFIG_AT76C50X_USB is not set
    # CONFIG_AIRO_CS is not set
    # CONFIG_PCMCIA_WL3501 is not set
    # CONFIG_PRISM54 is not set
    # CONFIG_USB_ZD1201 is not set
    # CONFIG_USB_NET_RNDIS_WLAN is not set
    # CONFIG_RTL8180 is not set
    CONFIG_RTL8187=m
    CONFIG_RTL8187_LEDS=y
    # CONFIG_ADM8211 is not set
    # CONFIG_MAC80211_HWSIM is not set
    # CONFIG_MWL8K is not set
    # CONFIG_ATH_CARDS is not set
    # CONFIG_B43 is not set
    # CONFIG_B43LEGACY is not set
    # CONFIG_BRCMSMAC is not set
    # CONFIG_BRCMFMAC is not set
    # CONFIG_HOSTAP is not set
    # CONFIG_IPW2100 is not set
    # CONFIG_IPW2200 is not set
    CONFIG_IWLWIFI=y
    CONFIG_IWLWIFI_LEDS=y
    CONFIG_IWLDVM=y
    # CONFIG_IWLMVM is not set
    # Debugging Options
    # CONFIG_IWLWIFI_DEBUG is not set
    # CONFIG_IWLWIFI_DEVICE_TRACING is not set
    # CONFIG_IWL4965 is not set
    # CONFIG_IWL3945 is not set
    # CONFIG_LIBERTAS is not set
    # CONFIG_HERMES is not set
    # CONFIG_P54_COMMON is not set
    # CONFIG_RT2X00 is not set
    # CONFIG_RTL_CARDS is not set
    # CONFIG_WL_TI is not set
    # CONFIG_ZD1211RW is not set
    # CONFIG_MWIFIEX is not set
    # CONFIG_CW1200 is not set
    # CONFIG_RSI_91X is not set
    # Enable WiMAX (Networking options) to see the WiMAX drivers
    # CONFIG_WAN is not set
    CONFIG_XEN_NETDEV_FRONTEND=y
    # CONFIG_XEN_NETDEV_BACKEND is not set
    # CONFIG_VMXNET3 is not set
    # CONFIG_ISDN is not set
    # Input device support
    CONFIG_INPUT=y
    CONFIG_INPUT_FF_MEMLESS=y
    CONFIG_INPUT_POLLDEV=y
    CONFIG_INPUT_SPARSEKMAP=y
    # CONFIG_INPUT_MATRIXKMAP is not set
    # Userland interfaces
    CONFIG_INPUT_MOUSEDEV=y
    # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    # CONFIG_INPUT_JOYDEV is not set
    CONFIG_INPUT_EVDEV=y
    # CONFIG_INPUT_EVBUG is not set
    # Input Device Drivers
    CONFIG_INPUT_KEYBOARD=y
    # CONFIG_KEYBOARD_ADP5588 is not set
    # CONFIG_KEYBOARD_ADP5589 is not set
    CONFIG_KEYBOARD_ATKBD=y
    # CONFIG_KEYBOARD_QT1070 is not set
    # CONFIG_KEYBOARD_QT2160 is not set
    # CONFIG_KEYBOARD_LKKBD is not set
    # CONFIG_KEYBOARD_TCA6416 is not set
    # CONFIG_KEYBOARD_TCA8418 is not set
    # CONFIG_KEYBOARD_LM8323 is not set
    # CONFIG_KEYBOARD_LM8333 is not set
    # CONFIG_KEYBOARD_MAX7359 is not set
    # CONFIG_KEYBOARD_MCS is not set
    # CONFIG_KEYBOARD_MPR121 is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    # CONFIG_KEYBOARD_OPENCORES is not set
    # CONFIG_KEYBOARD_STOWAWAY is not set
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    CONFIG_MOUSE_PS2_ALPS=y
    CONFIG_MOUSE_PS2_LOGIPS2PP=y
    CONFIG_MOUSE_PS2_SYNAPTICS=y
    CONFIG_MOUSE_PS2_CYPRESS=y
    CONFIG_MOUSE_PS2_LIFEBOOK=y
    CONFIG_MOUSE_PS2_TRACKPOINT=y
    # CONFIG_MOUSE_PS2_ELANTECH is not set
    # CONFIG_MOUSE_PS2_SENTELIC is not set
    # CONFIG_MOUSE_PS2_TOUCHKIT is not set
    # CONFIG_MOUSE_SERIAL is not set
    # CONFIG_MOUSE_APPLETOUCH is not set
    # CONFIG_MOUSE_BCM5974 is not set
    # CONFIG_MOUSE_CYAPA is not set
    # CONFIG_MOUSE_VSXXXAA is not set
    CONFIG_MOUSE_SYNAPTICS_I2C=y
    # CONFIG_MOUSE_SYNAPTICS_USB is not set
    CONFIG_INPUT_JOYSTICK=y
    # CONFIG_JOYSTICK_ANALOG is not set
    # CONFIG_JOYSTICK_A3D is not set
    # CONFIG_JOYSTICK_ADI is not set
    # CONFIG_JOYSTICK_COBRA is not set
    # CONFIG_JOYSTICK_GF2K is not set
    # CONFIG_JOYSTICK_GRIP is not set
    # CONFIG_JOYSTICK_GRIP_MP is not set
    # CONFIG_JOYSTICK_GUILLEMOT is not set
    # CONFIG_JOYSTICK_INTERACT is not set
    # CONFIG_JOYSTICK_SIDEWINDER is not set
    # CONFIG_JOYSTICK_TMDC is not set
    # CONFIG_JOYSTICK_IFORCE is not set
    # CONFIG_JOYSTICK_WARRIOR is not set
    # CONFIG_JOYSTICK_MAGELLAN is not set
    # CONFIG_JOYSTICK_SPACEORB is not set
    # CONFIG_JOYSTICK_SPACEBALL is not set
    # CONFIG_JOYSTICK_STINGER is not set
    # CONFIG_JOYSTICK_TWIDJOY is not set
    # CONFIG_JOYSTICK_ZHENHUA is not set
    # CONFIG_JOYSTICK_AS5011 is not set
    # CONFIG_JOYSTICK_JOYDUMP is not set
    CONFIG_JOYSTICK_XPAD=m
    CONFIG_JOYSTICK_XPAD_FF=y
    CONFIG_JOYSTICK_XPAD_LEDS=y
    # CONFIG_INPUT_TABLET is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    CONFIG_INPUT_MISC=y
    # CONFIG_INPUT_AD714X is not set
    # CONFIG_INPUT_BMA150 is not set
    CONFIG_INPUT_PCSPKR=m
    # CONFIG_INPUT_MMA8450 is not set
    # CONFIG_INPUT_MPU3050 is not set
    # CONFIG_INPUT_APANEL is not set
    # CONFIG_INPUT_ATLAS_BTNS is not set
    # CONFIG_INPUT_ATI_REMOTE2 is not set
    # CONFIG_INPUT_KEYSPAN_REMOTE is not set
    # CONFIG_INPUT_KXTJ9 is not set
    # CONFIG_INPUT_POWERMATE is not set
    # CONFIG_INPUT_YEALINK is not set
    # CONFIG_INPUT_CM109 is not set
    # CONFIG_INPUT_UINPUT is not set
    # CONFIG_INPUT_PCF8574 is not set
    # CONFIG_INPUT_ADXL34X is not set
    # CONFIG_INPUT_IMS_PCU is not set
    # CONFIG_INPUT_CMA3000 is not set
    CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
    # CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
    # Hardware I/O ports
    CONFIG_SERIO=y
    CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
    CONFIG_SERIO_I8042=y
    # CONFIG_SERIO_SERPORT is not set
    # CONFIG_SERIO_CT82C710 is not set
    # CONFIG_SERIO_PCIPS2 is not set
    CONFIG_SERIO_LIBPS2=y
    # CONFIG_SERIO_RAW is not set
    # CONFIG_SERIO_ALTERA_PS2 is not set
    # CONFIG_SERIO_PS2MULT is not set
    # CONFIG_SERIO_ARC_PS2 is not set
    # CONFIG_GAMEPORT is not set
    # Character devices
    CONFIG_TTY=y
    CONFIG_VT=y
    CONFIG_CONSOLE_TRANSLATIONS=y
    CONFIG_VT_CONSOLE=y
    CONFIG_VT_CONSOLE_SLEEP=y
    CONFIG_HW_CONSOLE=y
    CONFIG_VT_HW_CONSOLE_BINDING=y
    CONFIG_UNIX98_PTYS=y
    # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
    # CONFIG_LEGACY_PTYS is not set
    CONFIG_SERIAL_NONSTANDARD=y
    # CONFIG_ROCKETPORT is not set
    # CONFIG_CYCLADES is not set
    # CONFIG_MOXA_INTELLIO is not set
    # CONFIG_MOXA_SMARTIO is not set
    # CONFIG_SYNCLINK is not set
    # CONFIG_SYNCLINKMP is not set
    # CONFIG_SYNCLINK_GT is not set
    # CONFIG_NOZOMI is not set
    # CONFIG_ISI is not set
    # CONFIG_N_HDLC is not set
    # CONFIG_N_GSM is not set
    # CONFIG_TRACE_SINK is not set
    # KCopy
    CONFIG_KCOPY=m
    # CONFIG_DEVKMEM is not set
    # Serial drivers
    CONFIG_SERIAL_EARLYCON=y
    CONFIG_SERIAL_8250=y
    # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
    CONFIG_SERIAL_8250_PNP=y
    CONFIG_SERIAL_8250_CONSOLE=y
    CONFIG_SERIAL_8250_DMA=y
    CONFIG_SERIAL_8250_PCI=y
    # CONFIG_SERIAL_8250_CS is not set
    CONFIG_SERIAL_8250_NR_UARTS=32
    CONFIG_SERIAL_8250_RUNTIME_UARTS=4
    CONFIG_SERIAL_8250_EXTENDED=y
    CONFIG_SERIAL_8250_MANY_PORTS=y
    CONFIG_SERIAL_8250_SHARE_IRQ=y
    CONFIG_SERIAL_8250_DETECT_IRQ=y
    CONFIG_SERIAL_8250_RSA=y
    # CONFIG_SERIAL_8250_DW is not set
    # Non-8250 serial port support
    # CONFIG_SERIAL_MFD_HSU is not set
    CONFIG_SERIAL_CORE=y
    CONFIG_SERIAL_CORE_CONSOLE=y
    # CONFIG_SERIAL_JSM is not set
    # CONFIG_SERIAL_SCCNXP is not set
    # CONFIG_SERIAL_SC16IS7XX is not set
    # CONFIG_SERIAL_ALTERA_JTAGUART is not set
    # CONFIG_SERIAL_ALTERA_UART is not set
    # CONFIG_SERIAL_ARC is not set
    # CONFIG_SERIAL_RP2 is not set
    # CONFIG_SERIAL_FSL_LPUART is not set
    CONFIG_HVC_DRIVER=y
    CONFIG_HVC_IRQ=y
    CONFIG_HVC_XEN=y
    CONFIG_HVC_XEN_FRONTEND=y
    # CONFIG_VIRTIO_CONSOLE is not set
    # CONFIG_IPMI_HANDLER is not set
    CONFIG_HW_RANDOM=y
    # CONFIG_HW_RANDOM_TIMERIOMEM is not set
    CONFIG_HW_RANDOM_INTEL=m
    # CONFIG_HW_RANDOM_AMD is not set
    CONFIG_HW_RANDOM_VIA=m
    # CONFIG_HW_RANDOM_VIRTIO is not set
    CONFIG_NVRAM=y
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set
    # PCMCIA character devices
    # CONFIG_SYNCLINK_CS is not set
    # CONFIG_CARDMAN_4000 is not set
    # CONFIG_CARDMAN_4040 is not set
    # CONFIG_IPWIRELESS is not set
    # CONFIG_MWAVE is not set
    # CONFIG_RAW_DRIVER is not set
    CONFIG_HPET=y
    # CONFIG_HPET_MMAP is not set
    # CONFIG_HANGCHECK_TIMER is not set
    # CONFIG_TCG_TPM is not set
    # CONFIG_TELCLOCK is not set
    CONFIG_DEVPORT=y
    # I2C support
    CONFIG_I2C=y
    CONFIG_ACPI_I2C_OPREGION=y
    CONFIG_I2C_BOARDINFO=y
    CONFIG_I2C_COMPAT=y
    # CONFIG_I2C_CHARDEV is not set
    CONFIG_I2C_MUX=m
    # Multiplexer I2C Chip support
    # CONFIG_I2C_MUX_PCA9541 is not set
    CONFIG_I2C_HELPER_AUTO=y
    CONFIG_I2C_ALGOBIT=y
    # I2C Hardware Bus support
    # PC SMBus host controller drivers
    # CONFIG_I2C_ALI1535 is not set
    # CONFIG_I2C_ALI1563 is not set
    # CONFIG_I2C_ALI15X3 is not set
    # CONFIG_I2C_AMD756 is not set
    # CONFIG_I2C_AMD8111 is not set
    CONFIG_I2C_I801=y
    # CONFIG_I2C_ISCH is not set
    # CONFIG_I2C_ISMT is not set
    # CONFIG_I2C_PIIX4 is not set
    # CONFIG_I2C_NFORCE2 is not set
    # CONFIG_I2C_SIS5595 is not set
    # CONFIG_I2C_SIS630 is not set
    # CONFIG_I2C_SIS96X is not set
    # CONFIG_I2C_VIA is not set
    # CONFIG_I2C_VIAPRO is not set
    # ACPI drivers
    # CONFIG_I2C_SCMI is not set
    # I2C system bus drivers (mostly embedded / system-on-chip)
    # CONFIG_I2C_DESIGNWARE_PLATFORM is not set
    # CONFIG_I2C_DESIGNWARE_PCI is not set
    # CONFIG_I2C_OCORES is not set
    # CONFIG_I2C_PCA_PLATFORM is not set
    # CONFIG_I2C_PXA_PCI is not set
    # CONFIG_I2C_SIMTEC is not set
    # CONFIG_I2C_XILINX is not set
    # External I2C/SMBus adapter drivers
    # CONFIG_I2C_DIOLAN_U2C is not set
    # CONFIG_I2C_PARPORT_LIGHT is not set
    # CONFIG_I2C_ROBOTFUZZ_OSIF is not set
    # CONFIG_I2C_TAOS_EVM is not set
    # CONFIG_I2C_TINY_USB is not set
    # Other I2C/SMBus bus drivers
    # CONFIG_I2C_STUB is not set
    # CONFIG_I2C_DEBUG_CORE is not set
    # CONFIG_I2C_DEBUG_ALGO is not set
    # CONFIG_I2C_DEBUG_BUS is not set
    # CONFIG_SPI is not set
    # CONFIG_SPMI is not set
    # CONFIG_HSI is not set
    # PPS support
    CONFIG_PPS=y
    # CONFIG_PPS_DEBUG is not set
    # CONFIG_NTP_PPS is not set
    # PPS clients support
    # CONFIG_PPS_CLIENT_KTIMER is not set
    # CONFIG_PPS_CLIENT_LDISC is not set
    # CONFIG_PPS_CLIENT_GPIO is not set
    # PPS generators support
    # PTP clock support
    CONFIG_PTP_1588_CLOCK=y
    # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
    CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
    # CONFIG_GPIOLIB is not set
    # CONFIG_W1 is not set
    CONFIG_POWER_SUPPLY=y
    # CONFIG_POWER_SUPPLY_DEBUG is not set
    # CONFIG_PDA_POWER is not set
    # CONFIG_TEST_POWER is not set
    # CONFIG_BATTERY_DS2780 is not set
    # CONFIG_BATTERY_DS2781 is not set
    # CONFIG_BATTERY_DS2782 is not set
    # CONFIG_BATTERY_SBS is not set
    # CONFIG_BATTERY_BQ27x00 is not set
    # CONFIG_BATTERY_MAX17040 is not set
    # CONFIG_BATTERY_MAX17042 is not set
    # CONFIG_CHARGER_ISP1704 is not set
    # CONFIG_CHARGER_MAX8903 is not set
    # CONFIG_CHARGER_LP8727 is not set
    # CONFIG_CHARGER_BQ2415X is not set
    # CONFIG_CHARGER_SMB347 is not set
    # CONFIG_POWER_RESET is not set
    # CONFIG_POWER_AVS is not set
    CONFIG_HWMON=y
    # CONFIG_HWMON_VID is not set
    # CONFIG_HWMON_DEBUG_CHIP is not set
    # Native drivers
    # CONFIG_SENSORS_ABITUGURU is not set
    # CONFIG_SENSORS_ABITUGURU3 is not set
    # CONFIG_SENSORS_AD7414 is not set
    # CONFIG_SENSORS_AD7418 is not set
    # CONFIG_SENSORS_ADM1021 is not set
    # CONFIG_SENSORS_ADM1025 is not set
    # CONFIG_SENSORS_ADM1026 is not set
    # CONFIG_SENSORS_ADM1029 is not set
    # CONFIG_SENSORS_ADM1031 is not set
    # CONFIG_SENSORS_ADM9240 is not set
    # CONFIG_SENSORS_ADT7410 is not set
    # CONFIG_SENSORS_ADT7411 is not set
    # CONFIG_SENSORS_ADT7462 is not set
    # CONFIG_SENSORS_ADT7470 is not set
    # CONFIG_SENSORS_ADT7475 is not set
    # CONFIG_SENSORS_ASC7621 is not set
    # CONFIG_SENSORS_K8TEMP is not set
    # CONFIG_SENSORS_K10TEMP is not set
    # CONFIG_SENSORS_FAM15H_POWER is not set
    # CONFIG_SENSORS_APPLESMC is not set
    # CONFIG_SENSORS_ASB100 is not set
    # CONFIG_SENSORS_ATXP1 is not set
    # CONFIG_SENSORS_DS620 is not set
    # CONFIG_SENSORS_DS1621 is not set
    # CONFIG_SENSORS_I5K_AMB is not set
    # CONFIG_SENSORS_F71805F is not set
    # CONFIG_SENSORS_F71882FG is not set
    # CONFIG_SENSORS_F75375S is not set
    # CONFIG_SENSORS_FSCHMD is not set
    # CONFIG_SENSORS_GL518SM is not set
    # CONFIG_SENSORS_GL520SM is not set
    # CONFIG_SENSORS_G760A is not set
    # CONFIG_SENSORS_G762 is not set
    # CONFIG_SENSORS_HIH6130 is not set
    # CONFIG_SENSORS_CORETEMP is not set
    # CONFIG_SENSORS_IT87 is not set
    # CONFIG_SENSORS_JC42 is not set
    # CONFIG_SENSORS_POWR1220 is not set
    # CONFIG_SENSORS_LINEAGE is not set
    # CONFIG_SENSORS_LTC2945 is not set
    # CONFIG_SENSORS_LTC4151 is not set
    # CONFIG_SENSORS_LTC4215 is not set
    # CONFIG_SENSORS_LTC4222 is not set
    # CONFIG_SENSORS_LTC4245 is not set
    # CONFIG_SENSORS_LTC4260 is not set
    # CONFIG_SENSORS_LTC4261 is not set
    # CONFIG_SENSORS_MAX16065 is not set
    # CONFIG_SENSORS_MAX1619 is not set
    # CONFIG_SENSORS_MAX1668 is not set
    # CONFIG_SENSORS_MAX197 is not set
    # CONFIG_SENSORS_MAX6639 is not set
    # CONFIG_SENSORS_MAX6642 is not set
    # CONFIG_SENSORS_MAX6650 is not set
    # CONFIG_SENSORS_MAX6697 is not set
    # CONFIG_SENSORS_HTU21 is not set
    # CONFIG_SENSORS_MCP3021 is not set
    # CONFIG_SENSORS_LM63 is not set
    # CONFIG_SENSORS_LM73 is not set
    # CONFIG_SENSORS_LM75 is not set
    # CONFIG_SENSORS_LM77 is not set
    # CONFIG_SENSORS_LM78 is not set
    # CONFIG_SENSORS_LM80 is not set
    # CONFIG_SENSORS_LM83 is not set
    # CONFIG_SENSORS_LM85 is not set
    # CONFIG_SENSORS_LM87 is not set
    # CONFIG_SENSORS_LM90 is not set
    # CONFIG_SENSORS_LM92 is not set
    # CONFIG_SENSORS_LM93 is not set
    # CONFIG_SENSORS_LM95234 is not set
    # CONFIG_SENSORS_LM95241 is not set
    # CONFIG_SENSORS_LM95245 is not set
    # CONFIG_SENSORS_PC87360 is not set
    # CONFIG_SENSORS_PC87427 is not set
    # CONFIG_SENSORS_NTC_THERMISTOR is not set
    # CONFIG_SENSORS_NCT6683 is not set
    # CONFIG_SENSORS_NCT6775 is not set
    # CONFIG_SENSORS_PCF8591 is not set
    # CONFIG_PMBUS is not set
    # CONFIG_SENSORS_SHT21 is not set
    # CONFIG_SENSORS_SHTC1 is not set
    # CONFIG_SENSORS_SIS5595 is not set
    # CONFIG_SENSORS_DME1737 is not set
    # CONFIG_SENSORS_EMC1403 is not set
    # CONFIG_SENSORS_EMC2103 is not set
    # CONFIG_SENSORS_EMC6W201 is not set
    # CONFIG_SENSORS_SMSC47M1 is not set
    # CONFIG_SENSORS_SMSC47M192 is not set
    # CONFIG_SENSORS_SMSC47B397 is not set
    # CONFIG_SENSORS_SCH56XX_COMMON is not set
    # CONFIG_SENSORS_SMM665 is not set
    # CONFIG_SENSORS_ADC128D818 is not set
    # CONFIG_SENSORS_ADS1015 is not set
    # CONFIG_SENSORS_ADS7828 is not set
    # CONFIG_SENSORS_AMC6821 is not set
    # CONFIG_SENSORS_INA209 is not set
    # CONFIG_SENSORS_INA2XX is not set
    # CONFIG_SENSORS_THMC50 is not set
    # CONFIG_SENSORS_TMP102 is not set
    # CONFIG_SENSORS_TMP103 is not set
    # CONFIG_SENSORS_TMP401 is not set
    # CONFIG_SENSORS_TMP421 is not set
    # CONFIG_SENSORS_VIA_CPUTEMP is not set
    # CONFIG_SENSORS_VIA686A is not set
    # CONFIG_SENSORS_VT1211 is not set
    # CONFIG_SENSORS_VT8231 is not set
    # CONFIG_SENSORS_W83781D is not set
    # CONFIG_SENSORS_W83791D is not set
    # CONFIG_SENSORS_W83792D is not set
    # CONFIG_SENSORS_W83793 is not set
    # CONFIG_SENSORS_W83795 is not set
    # CONFIG_SENSORS_W83L785TS is not set
    # CONFIG_SENSORS_W83L786NG is not set
    # CONFIG_SENSORS_W83627HF is not set
    # CONFIG_SENSORS_W83627EHF is not set
    # ACPI drivers
    # CONFIG_SENSORS_ACPI_POWER is not set
    # CONFIG_SENSORS_ATK0110 is not set
    CONFIG_THERMAL=y
    CONFIG_THERMAL_HWMON=y
    CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
    # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
    # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
    # CONFIG_THERMAL_GOV_FAIR_SHARE is not set
    CONFIG_THERMAL_GOV_STEP_WISE=y
    CONFIG_THERMAL_GOV_USER_SPACE=y
    # CONFIG_THERMAL_EMULATION is not set
    # CONFIG_INTEL_POWERCLAMP is not set
    CONFIG_X86_PKG_TEMP_THERMAL=m
    CONFIG_ACPI_INT3403_THERMAL=m
    # CONFIG_INTEL_SOC_DTS_THERMAL is not set
    # Texas Instruments thermal drivers
    # CONFIG_WATCHDOG is not set
    CONFIG_SSB_POSSIBLE=y
    # Sonics Silicon Backplane
    # CONFIG_SSB is not set
    CONFIG_BCMA_POSSIBLE=y
    # Broadcom specific AMBA
    # CONFIG_BCMA is not set
    # Multifunction device drivers
    # CONFIG_MFD_CORE is not set
    # CONFIG_MFD_AS3711 is not set
    # CONFIG_PMIC_ADP5520 is not set
    # CONFIG_MFD_BCM590XX is not set
    # CONFIG_MFD_AXP20X is not set
    # CONFIG_MFD_CROS_EC is not set
    # CONFIG_PMIC_DA903X is not set
    # CONFIG_MFD_DA9052_I2C is not set
    # CONFIG_MFD_DA9055 is not set
    # CONFIG_MFD_DA9063 is not set
    # CONFIG_MFD_MC13XXX_I2C is not set
    # CONFIG_HTC_PASIC3 is not set
    # CONFIG_LPC_ICH is not set
    # CONFIG_LPC_SCH is not set
    # CONFIG_INTEL_SOC_PMIC is not set
    # CONFIG_MFD_JANZ_CMODIO is not set
    # CONFIG_MFD_KEMPLD is not set
    # CONFIG_MFD_88PM800 is not set
    # CONFIG_MFD_88PM805 is not set
    # CONFIG_MFD_88PM860X is not set
    # CONFIG_MFD_MAX14577 is not set
    # CONFIG_MFD_MAX77686 is not set
    # CONFIG_MFD_MAX77693 is not set
    # CONFIG_MFD_MAX8907 is not set
    # CONFIG_MFD_MAX8925 is not set
    # CONFIG_MFD_MAX8997 is not set
    # CONFIG_MFD_MAX8998 is not set
    # CONFIG_MFD_VIPERBOARD is not set
    # CONFIG_MFD_RETU is not set
    # CONFIG_MFD_PCF50633 is not set
    # CONFIG_MFD_RDC321X is not set
    # CONFIG_MFD_RTSX_PCI is not set
    # CONFIG_MFD_RTSX_USB is not set
    # CONFIG_MFD_RC5T583 is not set
    # CONFIG_MFD_SEC_CORE is not set
    # CONFIG_MFD_SI476X_CORE is not set
    # CONFIG_MFD_SM501 is not set
    # CONFIG_MFD_SMSC is not set
    # CONFIG_ABX500_CORE is not set
    # CONFIG_MFD_SYSCON is not set
    # CONFIG_MFD_TI_AM335X_TSCADC is not set
    # CONFIG_MFD_LP3943 is not set
    # CONFIG_MFD_LP8788 is not set
    # CONFIG_MFD_PALMAS is not set
    # CONFIG_TPS6105X is not set
    # CONFIG_TPS6507X is not set
    # CONFIG_MFD_TPS65090 is not set
    # CONFIG_MFD_TPS65217 is not set
    # CONFIG_MFD_TPS65218 is not set
    # CONFIG_MFD_TPS6586X is not set
    # CONFIG_MFD_TPS80031 is not set
    # CONFIG_TWL4030_CORE is not set
    # CONFIG_TWL6040_CORE is not set
    # CONFIG_MFD_WL1273_CORE is not set
    # CONFIG_MFD_LM3533 is not set
    # CONFIG_MFD_TC3589X is not set
    # CONFIG_MFD_TMIO is not set
    # CONFIG_MFD_VX855 is not set
    # CONFIG_MFD_ARIZONA_I2C is not set
    # CONFIG_MFD_WM8400 is not set
    # CONFIG_MFD_WM831X_I2C is not set
    # CONFIG_MFD_WM8350_I2C is not set
    # CONFIG_MFD_WM8994 is not set
    # CONFIG_REGULATOR is not set
    CONFIG_MEDIA_SUPPORT=m
    # Multimedia core support
    CONFIG_MEDIA_CAMERA_SUPPORT=y
    CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
    CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
    CONFIG_MEDIA_RADIO_SUPPORT=y
    CONFIG_MEDIA_SDR_SUPPORT=y
    # CONFIG_MEDIA_RC_SUPPORT is not set
    # CONFIG_MEDIA_CONTROLLER is not set
    CONFIG_VIDEO_DEV=m
    CONFIG_VIDEO_V4L2=m
    # CONFIG_VIDEO_ADV_DEBUG is not set
    # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
    CONFIG_VIDEOBUF_GEN=m
    CONFIG_VIDEOBUF_VMALLOC=m
    CONFIG_VIDEOBUF2_CORE=m
    CONFIG_VIDEOBUF2_MEMOPS=m
    CONFIG_VIDEOBUF2_VMALLOC=m
    CONFIG_DVB_CORE=m
    CONFIG_DVB_NET=y
    # CONFIG_TTPCI_EEPROM is not set
    CONFIG_DVB_MAX_ADAPTERS=8
    # CONFIG_DVB_DYNAMIC_MINORS is not set
    # Media drivers
    CONFIG_MEDIA_USB_SUPPORT=y
    # Webcam devices
    CONFIG_USB_VIDEO_CLASS=m
    CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
    CONFIG_USB_GSPCA=m
    # CONFIG_USB_M5602 is not set
    # CONFIG_USB_STV06XX is not set
    # CONFIG_USB_GL860 is not set
    # CONFIG_USB_GSPCA_BENQ is not set
    # CONFIG_USB_GSPCA_CONEX is not set
    # CONFIG_USB_GSPCA_CPIA1 is not set
    # CONFIG_USB_GSPCA_DTCS033 is not set
    # CONFIG_USB_GSPCA_ETOMS is not set
    # CONFIG_USB_GSPCA_FINEPIX is not set
    # CONFIG_USB_GSPCA_JEILINJ is not set
    # CONFIG_USB_GSPCA_JL2005BCD is not set
    # CONFIG_USB_GSPCA_KINECT is not set
    # CONFIG_USB_GSPCA_KONICA is not set
    # CONFIG_USB_GSPCA_MARS is not set
    # CONFIG_USB_GSPCA_MR97310A is not set
    # CONFIG_USB_GSPCA_NW80X is not set
    # CONFIG_USB_GSPCA_OV519 is not set
    # CONFIG_USB_GSPCA_OV534 is not set
    # CONFIG_USB_GSPCA_OV534_9 is not set
    # CONFIG_USB_GSPCA_PAC207 is not set
    # CONFIG_USB_GSPCA_PAC7302 is not set
    # CONFIG_USB_GSPCA_PAC7311 is not set
    # CONFIG_USB_GSPCA_SE401 is not set
    # CONFIG_USB_GSPCA_SN9C2028 is not set
    # CONFIG_USB_GSPCA_SN9C20X is not set
    # CONFIG_USB_GSPCA_SONIXB is not set
    # CONFIG_USB_GSPCA_SONIXJ is not set
    # CONFIG_USB_GSPCA_SPCA500 is not set
    # CONFIG_USB_GSPCA_SPCA501 is not set
    # CONFIG_USB_GSPCA_SPCA505 is not set
    # CONFIG_USB_GSPCA_SPCA506 is not set
    # CONFIG_USB_GSPCA_SPCA508 is not set
    # CONFIG_USB_GSPCA_SPCA561 is not set
    # CONFIG_USB_GSPCA_SPCA1528 is not set
    # CONFIG_USB_GSPCA_SQ905 is not set
    # CONFIG_USB_GSPCA_SQ905C is not set
    # CONFIG_US

    You might want to try setting up early KMS.  That is, put the module in your initramfs explicitly so that it is loaded early... hence, 'early KMS'.
    Edit: You might want to also double check to make sure that the kernel that it being booted is matching up with the modules it is trying to load.  That is, if you move your kernel to put it on the ESP or if you sometimes don't keep /boot mounted, then you might want to do a "file -k /path/to/kernel" and make sure that whatever is in /usr/lib/modules matches.  There is the possibility that if the initramfs failed because it did not find this matchup, then the kernel and the built initramfs are not meant for each other.
    Last edited by WonderWoofy (2013-07-25 14:46:23)

Maybe you are looking for