Graphical version of Process Chain Maintenance

Hi Expert,
My BW is running on 730 SAPKW73003, BI CONT 735 SAPK-73503INBICONT
when i run RSPC, it is showing RSA1 menu with extra process chain menu on the right.
Where is the old version of graphical representation of RSPC? Anyway i could get it back?
Thanks.
Regards,
MJ

Hi MJ,
This is new feature (standard) in BW 7.3 version. even if u try to get into RSPC, It will redirect you to RSA1.
RSPC is like embedded in RSA1 and u can use full screen (Shift+F11) to view any particular process chain ( to avoid all other standard options of RSA1.)
even RSPC1 will take you to same place(RSA1)
Regards,
Sudheer
Edited by: Sudheer Kumar Kurra on Oct 17, 2011 9:03 AM

Similar Messages

Process chain maintenance......... inSAP BI

hy!,
can any one tell me why we use process chain maintenance in BI & what is this actually it will do......
can tell me step by step process..........
thanks & regards
ravi

Hi.
Could you plz clarify your question ?
Regards.

Error in Step Copy Plan version in Process Chain

Hi all,
We have step in Process Chain called 'Copy Plan version'.This stet is getting failed quite frequently. I just repeat it and the error is getting solved. I just wanted to know that is there any permanent solution for that. We cant afford to getting it failed that frequently.
I dont have any idea about this step. Can you please provide me information about this step and a possible remedy aw well.
The error messaage is :
Selection accesses data that is currently locked; user
Job cancelled after system exception ERROR_MESSAGE.
Please suggest.
Regards
sunny

This is due to "Selection accesses data that is currently locked; user" , there is another process from another process chain which locked the object at the same time frame , so due to that this step is failing
you can increase waittime 30mins(example)before this Step Copy Plan version executes in the process chain.
OR, change the schedule time for this process chain

Process Chain Maintenance

Hi,
I have a process chain for calculating the forecast.
In my process chain, I have ensured that at a time only 4 jobs run.
Last week, when I ran the process chain it had failed.
When I look in the log of the jobs from process chain, it does not show any error.
Also the status of job in SM37 is "Finished"
If the job had failed it would have shown as "Cancelled".
Also, when I look for these jobs in Process Chain, it is shown as failed, but in logs it is shown as success.
Has anyone come across such a situation?
Also can share me some information on Process chains, where process chains has behaved differently from the expected?
May be notes id or documents.
Thanks,
Vikas

Vikas,
we have this problem...long back i posted in this forum...one close answer is monitor RSPC seperately...u can not catch any abend in process chain through any ABAP program..
regards
umamahesh

Insert Execute infopackage on process chain maintenance

Hy, i have a serious problem: i can't insert a infopackage on process chain that i created on AWB.
When drag the insert "Execute infopackage process" on process chain and select the match code or F4 button to select an infopackage , receive this message:No data selected.So i can't insert infopackage in my process chain.
Could you help me?
Thank's a lot.
Sincerely yours
Andrea Maraviglia

Hi,
Go to rspc. At top of left pane you can see a data target icon. Click on that. Select your data target. Check the infopackage ckeck box. Here you can select your infopackage.
Try this out.
Regards,
Amruth

BW objects in Process Chain Maintenance Planning view disappeared.

Hello,
I am running Business Information Warehouse 3.1
We recently updated our system to the lastest supportpacks. After the supportpacks were completed. When I go to edit process chains in transaction RSA1, all the objects in the left are no longer there. Have anyone experience this? How can I get the objects back?
Thank you

does not apply anymore

Process Chain Maintenance: RSPC and RSPCM

Good morning
We have created, scheduled and activated a process chain in RSPC. How do we get it to display on the RSPCM txn?
Thanks for your time.
Cornelius Faurie

How do I add it to RSPCM?
thanks
Cornelius

Explain: how to include Infospoke in Process Chain where destination is DB

Explain: how to include Infospoke in Process Chain where destination is local machine database [NOT Flatfile]

Hi vijay,
First you create an Infospoke with destination as a DB table in your local BI or BW Machine. Now add this infospoke by going through below steps.
1. Call up the process chain maintenance. Choose This graphic is explained in the accompanying text Process Chain Maintenance from the Administrator Workbench toolbar. The Process Chain Maintenance Planning View screen appears.
2. In the left-hand screen area of the required This graphic is explained in the accompanying text display component, navigate to the process chain in which you want to insert your InfoSpoke. Double-click to select it. The system displays the process chain plan view in the right-hand side of the screen.
If no suitable process chain is available, you need to create a new process chain. You can find additional information under Creating a Process Chain.
3. To insert a process for extraction by means of an InfoSpoke, choose This graphic is explained in the accompanying text Process Types in the left-hand area of the screen. The system now displays the process categories available.
4.In the process category Loading Process and Post Processing, choose the application process type This graphic is explained in the accompanying text Data Export into External Systems.
5.Insert the Data Export into External Systems application type with Drag&Drop into the process chain. The dialog box for inserting a process variant appears.
6.In the Process Variant field, enter the name of the InfoSpoke that you want to include in the process chain, or select it by means of the input help.
Once You have added the infospoke you have to write a program which will fetch the database table that you filled and transfer the data fetched to other legacy system with the help of XI System
For more information on how to infospoke on 3rd party pls find the link below
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5f12a03d-0401-0010-d9a7-a55552cbe9da
Hope this help
Harish

Process chains always cancelled directly

Holá Gurus,
while executing a process chains, it is always cancelled directly. The log shows the following message:
Process ABAP, variant /SIE/RT_PV_CLOSE_REQUEST_EFC is not scheduled waiting for event RSPROCESS 44IM3WWNHW3Q6IAMA88TS086H
Message no. RSPC006
Diagnosis
Process ABAP (variant /SIE/RT_PV_CLOSE_REQUEST_EFC) needs to be started. According to the process chain maintenance, it needs to be scheduled while waiting for event /SIE/RT_PV_CLOSE_REQUEST_EFC 44IM3WWNHW3Q6IAMA88TS086H. However, this is not the case.
System response
The chain is terminated.
Procedure
In order to complete the chain run, follow these steps:
1. Ensure that Start Using Metachain or API is selected in the variant maintenance for the start process. By doing so, you ensure that the chain is not restarted.
2. Schedule the process chain.
3. In the log view for the process chain maintenance, choose View -> Merge Active Version, and end the incorrect process or using the respective context menu entry.
Does anyone have an idea, how to solve this issue?
Thx in advance!

Hi,
You can have a look at the thread below - I think it'll help:
Process chain failed
Cheers,
Reetu

Execute Process chain after infopackage run for a PC file

Hello all.
The scenario I need to solve is the following.
I have several files to be load to ODS from P users PC. I will do this with an info package. But after this load there are some more process that have to be run whoch are created in a process chain.
I would like to automate the execution of the precess chain right after the load from PC file is done.
Any sugestions?
Thanks and regards,

Hello Javier Alvarado,
If you use process chains, the automatically integrated processes are ignored and have to
be implemented using the process chain. If you schedule a specific process in a chain,
you support the automatic insertion of additional, relevant standard processes with the
consideration of such automatic actions.
For example, if you have selected the processing types Only PSA and Subsequently in
Data Targets in the InfoPackage from the tabstrip Processing, and you are using this
InfoPackage in a process chain, then the further processing into the data target does not
automatically happen. Instead, it only happens if the process Update PSA is scheduled in
the respective process chain after the loading process. Thus, the process chain
maintenance supports the automation in this case. In this way, you generate a process
variant for updating from the PSA in the chain when inserting the loading process with the
process types Only PSA and Subsequently in Data Targets automatically into a chain.
Well i am talking about 30B Version
Regards,
Mohan.

Triggering the process chain

Hi all,
I just installed a couple of process chains(content). And i can see them in Process chain maintenance too .. What are the steps that need to be followed to trigger the process chains .. and how do i know, the process chians are in process or tiggered?
Thanks in Advance.
Mav.

Hi Bhanu,
When i checked it .. it says "processes with errors"...
and when i save it ... its says "Version 'M' of chain 0XX_XXX_XXXX_X01 was saved without checking" ...
and when i execute it it says the same " processes with errors".
So i'm trying to reinstall the whole thing again.... Before implementing the process chains, i already have master data sitting in my info objects. DOes it in any way effect it? I dont know, whats going wrong but it aint working.
Can u think of something that i'm missing?
Thanks in advance,
Mav.

Process Chain's Mystery

Hello Gurus,
I am having a strange issue about process chains:
I have two PCs, process chain-A for master data and process chain-B for hierarchy, which is scheduled to run after PC-A. No issues for MD PC.
The hierarchy process chain-B works fine for new days and suddenly gets "cancelled". After that next all the runs this process chain gets "cancelled",
until it is run manually and rescheduled / resubmitted.
After doing "RSPC" -PC-B -- start --> display-all-jobs --> "cancelled job" - Job log, I get following message:
Message text
Job started
Step 001 started (program RSPROCESS, variant &0000000020160, user ID BWREMOTE)
Process LOADING, variant ZPAK_E54MMCSD6M18NU2WQZZMELKW2 is not scheduled waiting for event RSPROCESS 15LLVMYVTTGHZ9SQN12Y535SC
Job cancelled
After looking at the "Diagnosis" / "System Response" / "Procedure" - the procedure looks like:
======================================
<b>Procedure</b>
In order to complete the chain run, follow these steps:
1. Ensure that Start Using Metachain or API is selected in the variant maintenance for the start process. By doing so, you ensure that the chain is not restarted.
2. Schedule the process chain.
3. In the log view for the process chain maintenance, choose View -> Merge Active Version, and end the incorrect process or using the respective context menu entry.
===============================================
If I follow this procedure, I cannot schedule the process chain.
Any help to resolve this issue is appreciated. ( Why this happens...what is the solution..?)
I promise to award points.
Thank you for your time.
Pramod.

Hi Promod,
As you mentioned PC-B is scheduled after PC-A, first ensure whether PC-B starts from PC-A as an meta-chain or a seperate chain (direct).
Check for Job Logs for that particular trigerrinng process which got cancelled in SM37 (there might be some information given why job has been cancelled).
Re-run the chain by scheduling it as immediate and check the processing of triggering process in Applicaiotn server (sm51), that what exactly it is doing (whether running, hold or waiting?)
Probably, trigerring process of PC-B is waiting for an event (might be failing) to occur, check in the maintain variant how the chain is been triggered?
If it is a direct chain and if you schedule it as immediate and is running fine then change the timings of PC-B, probably trigerring process has not got the required locks at that time.
Check for these measures and let me know the status.
Regards,
Vij

Error in Transporting Process Chain in BI 7.0

Hi Gurus,
i m getting following error "Object 'DM' (APCO) of type 'Application' is not available in version 'A' " in BI 7.0 while transporting a process chain.
I thought it my have issues with version of process chain, but the proces chain is in A version still is gives above error.

[Hello Sonal,|http://chandranonline.blogspot.com]
APCO denotes the OLTP Application Component. So check all the Application Components used in the PC are available.
Also see
SAP Note 382471 BW-OLTP-APCO: How do I transport it?
[BI Content Delivery in OLTP Systems by SAP (SAP Library - Customer Content in OLTP Systems)|http://help.sap.com/saphelp_nw04s/helpdata/en/ca/85f911c4bda4479af0a062bd9dfa94/frameset.htm]
[Thanks|http://chandranonline.blogspot.com]
[Chandran|http://chandranonline.blogspot.com]

Process Chain Priority Schedule in 3.5

Hi Gurus,
Is it possible to schedule jobs with a priority A, B, C like in Netweaver 2004s? If yes, how and where? I have a meta-chain which I scheduled with time and running daily. It is perfectly working fine. However, I am just interested to know if there is a functionality in 3.5 like in Netweaver 2004s that when you schedule it will give you a choice for Priority A, B or C.
Your answers are highly appreciated.
Thanks.

Hi,
    If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
The Maintain Start Process screen appears again
Creating a Process Chain Using the Maintenance Dialog for a Process
You are in the maintenance dialog of a process that you want to include in a process chain.
       1.      Choose the Process Chain Maintenance pushbutton and create a process variant.
       2.      Save the variant and go back to the previous screen.
A dialog window appears in which you enter a technical name and a description of the chain that you want to create.
       3.      Confirm your entries.
The Add Start Process dialog window appears.
       4.      Create a variant for a start process.
a.       On the Maintain Start Process screen, choose whether you want to schedule the chain directly or whether you want to start it using a metachain.
b.       If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
The Maintain Start Process screen appears again.
c.       Save your entries, return to the previous screen and confirm your entries in the Add Start Process dialog window.
You are taken to the Plan View of the process chain maintenance screen.
The various process categories, the application processes, and collection processes are displayed in the left-hand area of the screen. In the right-hand area of the screen, the process chain is displayed
Hareesh

Failure of OS command in Process Chain

Hi All,
I have OS command in a process chain. Sometimes this process gets failed and sometimes it is completed successfully.
When it fails following message appears in Process Chain Maintenance Log View:
==== Output of System Commands: Repeat # 0 ====
mv: cannot stat `/usr/sap/transBD1/upload/BP1/StockPosition/StockPosition_BNL.txt': No such file or directory
External program terminated with exit code 1
Kindly reply if anyone has any idea about it.
Many Thanks in advance.!
Regards,
Swati Ramteke

Hi Vikram and Srinivas
In the process chain, file is first loaded to cube from the specified path. There is no problem in loading, it is completing successfully.
Next, this file is archived from specified path to archived folder by OS Command.
OS Command is:
#!/bin/ksh
FILEDATE=`date +%m%d%y`
mv /usr/sap/transBD1/upload/BP1/StockPosition/StockPosition_BNL.txt /usr/sap/transBD1/upload/BP1/StockPosition/processed/StockPosition_BNL.$FILEDATE
The file is archived successfully in processed folder but OS command process in process chain is getting failed with mentioned error in previous thread.
Regards,
Swati

Graphical version of Process Chain Maintenance

Similar Messages

Maybe you are looking for