Graphical view in BPE
HI , I am Using Sun IDM Version 5.5 .
When before I using 5.0
The graphical view of the form appears in the lower right pane of the BPE display. Itdisplays the form HTML as displayed by Identity Manager.
Bu tin 5.5 i am not finding out. can any one help me how to view Graphical view in 5.5 .
Thanks
Veronica
Jim
I tried but i was configured my web browser , I am not sure how to configure it, and it wont show in the BPE at right side down in 5.5 ?
can you tell me How to configure Webbroser?
Similar Messages
-
I am trying to edit the default forms/reports that come with CM14, trying to edit the data model, data set, (to get to the old Infomaker style graphic view) , the Query model does not display (error the list of tables is too long..) Oracle tell me the limit is 60, there are not 60 tables referenced in any CM report.
Does this Query builder view work at all on any report?
(bigger question, we are moving from CM12, should we move to CM13 which works with infomaker?)
Thanks,
Paul LKurt, thanks for your replies.
A couple of notes/clarifications.
1. You are correct that BI works better in Firefox--I have observed issues with the BI display when using IE. I would recommend using Firefox too.
2. You are correct about the way to get to the Query Builder to see a graphical view of data tables. There are basically two issues with this that I mentioned, but will re-iterate:
a. If you have an EXISTING query in the data set, then click the "Query Builder" button, this will remove the existing query that's there, it will NOT display the existing query in the query builder. Query Builder works only to create a NEW query from scratch.
b. Query builder is limited to selecting 60 fields max in your query. If you are creating a large report with many tables, you may find that 60 fields is not enough. For that you will have to work in the SQL edit screen rather than using the query builder.
I would impress on anyone developing CM14 reports that they become familiar with the database schema and relationships to avoid problems when developing your BI reports. You should be able to find the tables and joins documentation in the knowledgebase. -
Reg:Graphical view in workflow
Hi to all,
Now i am having IDES ECC 6.0 , I had put the TC SWDD i am getting workflow screen. But i couldnt find out the graphical view of that screen.But the graphical view and all i can get through ECC 5.0 version.
Kinldy do the helpful.
Thanks,
Sankar MHi Rob,
I am working in IDES ECC 6.0 , In that i gone to SWDD->EXTRAS->options->Modelling view -tree only is there. I couldnt change into Graphical network.That particular Modeling view button is in disable mode.What can i do for that?
Thanks,
Sankar M -
Organizational structure graphical view
Hi Friends,
we have problem with the organizational structure graphical view in OM. the system can not read the texts fonts, we don't use english characters. what should we do?
ThanksHi there!
Hope you both don't mind but I am piggy backing on your OM discussion. You both sound like have good experience in working with Turkey. I am trying to find a standard infotype to store a Turkish Identification no, SSN, and Local ID card numbers. I am leaning towards IT0185 but first want to check around to see if there are Turkish infotypes specifically for these types of documentation. Your feedback is greatly appreciated.
Thank you in advance.
Dina -
Changing the Chart Title in Graphic View in Interactive demand Planning
Hi All,
Is it possible to change the Chart title in Graphic View in interactive demand planning screen.
When we go to interactive planning after loading the data we go to Univariate forecast then switch to graphic, the chart title shows the selection at which the planning is done. For eg; If I plan at die level and i select a particular sap material, the chart title displays Die value and not the material value.
Is it possible to change the chart title such that it displays all the selections made in selection winodw, like in the above case both Die value as well as SAP Material Number.
Thanks and Regards,
DianaDear Diana,
unfortunately this is not possible.
The chart title is build from the planning book name + the Show characteristic in the shuffler (+ available nav. attributes of the Show char).
The functionality you requested doesn't exist in standard.
Regards,
Tibor -
System not displying in graphical view in solution manager
Hello,
I added 10 system in solution manager for centralize monitoring but 8 of them are displaying in graphical views another 2 system are not displaying . all the systems adding procedure is same. but still 2 of them not displaying in graphical view can anyone tell me the chouses of this type of error .
Kindly guide me to short out this issue
Thank you
DeepakHi,
Open your Solution of the affected systems (12 Systems not appearing in your Monitoring). Go to Solution Landscape Maintenance (Under Solution Landscape).
Compare the Leading role of the solution with the role of the system in the logical component.
If these are different, right click on the system and select Put in Solution.
Hope this helps.
Feel free to revert back.
-=-Ragu -
SRM 7.0 Approval Flow in Graphical view
Hi experts,
I'm upgrading from SAP SRM 4.0 to 7.0.
In SRM 4.0 I was able to view, in a shopping cart, for example, the approval structure in graphical view and in a table view.
In SRM 7.0 I can only see the approval flow in a table view. How can I see the approval flow in a grapical view?
Thank you,
R SilvaHi Silva
srm 7.0 - Only Table is only AVAILABLE. no more graphical overview in SRM 7.0 on wards.
SRM 4.0 /5.0 - Table as well as Graphical over view are available.
graphical overview was not supported in SRM 7.0 on wards as per standard.
Muthu -
Graphical view of share point survey issue
Hi All,
I have created a survey in my sharepoint site with a column as Choice (Check boxes (allow multiple selections)).
When I go to graphical view it is showing extra column if users selected more than one option.
How can I avoid that and show the percentage only to the choices (if they choose more than one also).
Regards
KotiHello,
unfortunately, that's how SharePoint works. The values of a multiple selection are stored in this one field and the chart shows exactly what SharePoint has stored.
You may need to export the survey results to Excel and then split multiple selections into single cells in order to create the chart you want to see.
cheers, teylyn -
Graphical view for confirmations
Hello,
Can some one tell me the transaction code for viewing the graphical view of confirmations done for the operations of PM order? The Sap tcode for checking the data of hours of plan vs actual is S_ALR_87013432.
Regards,
NarendraHi
SAP Note 1028482 Approval preview: Tabular display instead of applet
The following note gives you the option of choosing either the table display or the graphic display as default :Note 1077956 - Follow-on document display: Tabular displ instead of applet
please check the above notes recommended by SAP.
regards
Muthu -
Graphic view when entering SDP94 planning book
Hi,
do some of you know if there is a possibility for setting the DP planning book up, so it always will start with the graphic view ??
Instead of starting with the table view
This only for single users ???
Thanks in advance
Jan JuhlHi Jan,
You can achieve the same by going into the design mode of the data view from the interactive planning book. Then Click on the top left cell with the right mouse button to pull down a menu. Then Check the graphic option. Save and come to live. It will dispay the graphic option as a default everytime you open the planning book.
In case you do not want table view at all in the data view, you can go to design view and click the layout button on the top. Then unflag the Table view. Save and come to live mode. The data view can show graphic dispaly only.
Let me know if it helps.
Regards
Gaurav -
NWBC Reporting (Graphical View) Sequence of steps to activate.
Hi,
I am currently trying to configure NWBC reporting section in MDG6.1. It looks like Processing Time (List View) and Status Report Works fine but not Processing Time (Graphical View) which I uderstand BI Xcelsius dashboards. Currently when I click on Graphical View link, It goes to a page showing a button Change Lauchpad and a link under it as Processing Time. When I click Processing Time..it says Service not reachable.
I understand BI client not setup properly to link from dev system. I asked basis team to setup a BI client but I am not sure exact sequence to be followed here.. I search through SCN and did not find correct sequence.
Can anyone point me the right sequence to setup graphical view reporting? and the SAP Notes to refer on each sequense etc.
Thanks
PraveenHi Praveen,
Please go through the document Activating BI Content for Analysis of Change Re... | SCN this is the good document which talks in detail about the BI content setup.
Best regards,
Girish -
T Code for Graphical view of OM
Hi Friends,
What is the TCode for Graphical view of OMHi ram,
go to ppom_old, search for your org.structure then click once the root then at mid top you can see the button for structural grahics view. the one with color blue,green, red and yellow. it looks like a building graphs.
their is no tcode for this but you can use short cut from ppom_old click shift +F8.
thank you.
toti -
OM structure in graphical view
Hai All,
Just i have use T-Code- PPIS and got the org structure, but i could not able to download into word or excel, how can i take this graphical view of the structure,
or can i take this in any other way. pls help some one.
regards,
dinesh.Hi,
You can use PPOSE and go to Print, in the Preview, Go to System, List, Save, Local File, Spreadsheet and you will be able to download the Org Struc.
Regards,
Saureb Bannerjii
SAP HR Consultant -
4.0EA1 - Query Builder Graphical View
Liking the time saver tweaks in this EA tester edition, I use the query builder alot, a good enhancement to this would be an option to default the building of the graphical view of the query to a collapsed nature with a toggle to expand the individual table to selecting fields.
Makes it easier to graphically understand the query and rearrange the table objects (drag/drop) without the need to spend ages reducing the length to table with 200+fields in of which or dragging tables to rearrange at one screen length at a time, an option could be to set how many fields to table expands to as a default ie 10 fields, rest you get to by scrolling through the list and have the toggle that cycles through 3 states when clicked – Minimised, Default, Maximised
I notice on the right click on a graphical table an option to fully expand, so the toggle could be linked to this right click optionLiking the time saver tweaks in this EA tester edition, I use the query builder alot, a good enhancement to this would be an option to default the building of the graphical view of the query to a collapsed nature with a toggle to expand the individual table to selecting fields.
Makes it easier to graphically understand the query and rearrange the table objects (drag/drop) without the need to spend ages reducing the length to table with 200+fields in of which or dragging tables to rearrange at one screen length at a time, an option could be to set how many fields to table expands to as a default ie 10 fields, rest you get to by scrolling through the list and have the toggle that cycles through 3 states when clicked – Minimised, Default, Maximised
I notice on the right click on a graphical table an option to fully expand, so the toggle could be linked to this right click option -
Hi,
I've a report with alv grid.When i choose some columns and push the graphic view button, a pop up screen with the graphical view of chosen columns appears.I want to download this graphic to the excel.Is it possible?ya , u can make a custom button on alv output screen . and for perticular line on clicking button u can (call the function module) view graph...
CALL FUNCTION 'GRAPH_MATRIX_3D'
EXPORTING
COL1 = 'Jan'
COL2 = 'Feb'
COL3 = 'Mar'
TITL = 'Utility Expenses in US$.'
TABLES
DATA = ITAB_DATA
OPTS = ITAB_OPTIONS
EXCEPTIONS
OTHERS = 1.
Maybe you are looking for
-
How do I create this logo in 3d in AE?
I an trying to create the attached company logo in 3D for a video into. I am very new to After Effects and am having a great amount of difficulty figuring this out. The logo is drawn in Illustrator and everything is outlined as vectors. Where do I go
-
I have HP pavillion dv6000, im planning to buy a new battery. So want to know which would i preffer, a 6 cell or 12 cell battery. And which one im having currently? My battery's part number is 436281-422
-
Hi, Im using Oracle 9i JDeveloper and Win2000. Im trying using the PoolMan as my DB connection, but the error occur when i using J2SE version 1.4.0 but its work fine for J2SE ver. 1.3.1_02 (which is the default JDK used by the JDeveloper). The error
-
Lost rolls and contents thumbnails in albums
some how i have lost two years of rolls from the library. the thumbnails in the albums are also missing. I photo is capable of importing, as i have just recently added some rolls. The jpg's are in the i photo library in the modified and original fold
-
CF9 Scheduled Tasks Sort order changed; how to fix it?
I just notice in my CF9 administrator under "Scheduled Tasks", the tasks now display Alphabetically IN GROUPS BY FREQUENCY rather than the straight alpha by Task Name. Is this a new "feature" of CF9 and how can I change it back to "normal" sort by T