Graphical vs Raw Display

I'm sending my output to a spool request. When I look at it online in the "Graphical" display, a sample of a line is below:
JOEXX
4569878
STAT44
I'm using a pipe as a delimiter.
When I switch to "Raw" display, the same line as above looks like what is below:
#5JOEXX#54569878#5STAT44#5
The pipe delimiter displays as #5.
Is there a way to get around this where my pipe delimiter shows in the "Raw" Display or another delimiter that will display in both display mode?
Any help would be appriciated,

It is not possible, as I have created one spool of the standard transaction SM51 and tried to see in the RAW Display.
the output was the same...#5 for pipe, #4 for horizontal line
#COL0N#COL0H#0#4#4#4#4#4#4#4#4#4#4#4#4#4
#COL1H#5 No Ty. PID Status Re
#6#4#4#4#4#4#4#4#4#4#4#4#4#4#4#4#4#4#4#4
#COL0H#5#? #COL4H 0 #COL2NDIA 508154
#5#COL0N#? #COL4H 1 #COL2NDIA 504056
#5#COL0N#? #COL4H 2 #COL2NDIA 421970
#5#COL0N#? #COL4H 3 #COL2NDIA 528390
Sorry..
Regards,
Naimesh Patel

Similar Messages

In Smartform i am getting a Error Message Graphic cannot be displayed

Hi All,
I am trying to display a image in smartform . In the Code i have created a BDC for SE78 for Image upload and when the Image is Upload and when i try to execute the Smartform i am getting a Error Message : Graphic cannot be displayed
I am trying to load a BMP image in the form.
Can anyone help me out .
Thanks in Advance .
Regards
Shankar

Hi,
There are two possibilies of issue here.
1. The BDC is not correct so the image is not uploaded.
2. Graphic parameter is not properly specified in smartform.
Please check issue no 1 first. If you confirm that image already in SAP, then you can go to issue no 2.
Regards,
Teddy Kurniawan

Incredible email graphics won't display

Occasionally I get emails with graphics in the email, rather than attachments. The graphics don't display, so I have to open the email on my home PC to see them. On my Droid, I went into email/menu/more/settings/send & receive to find my 'Mail size limit' was set at 5kb, so I changed it to No limit. I forwarded the email from my PC (same ISP), however only a few of the graphics appeared, most did not. My wife has the Droid X and we share the same email account, so she also got the email. She can see all the graphics. What gives? We both have the same OS.

the graphics in my emails are always in the body of the email? i never receive them as attachments? i get many emails with graphics and they always appear in the same manner as when i pull those same emails from my pc. i just checked my settings, but can't find anywhere to change anything that may affect how your emails show up on the device? sorry.

Graphics corrupted / garbled display on Core Duo MacBook Pro (ATI)

My first-generation (Core Duo) MacBook Pro (with ATI chipset) is having video problems.
When this happens, the graphics become corrupted / display becomes garbled and the computer freezes shortly afterwards making it basically unusable. You can just about follow a garbled mouse pointer around, but it is unresponsive.
The only solution is a hard reset (power button for seven seconds).
Has anyone encountered this problem?
At first, I suspected that the computer was overheating as it seemed to occur only after prolonged use - but in the past two days, it could freeze immediately at login screen basically making it completely unusable.
Apple Hardware Test (on original CD) says "No Problems Found", but I still suspect hardware trouble as this only began occuring a week or so after my computer had the left fan replaced (it stopped working after an earlier problem in January at the Apple Store in Highcross Leicester.
I suspect something ELSE is wrong and that it requires service again, so am planning to go to the store in Birmingham on Sunday (which is closer to me -- I went to the Leicester store last time). What should I ask Apple to look at? The graphic corruption occurs even when running right off the Leopard CD, or even on the Apple Hardware Test!

Hi - thanks for your help with the issue. Just as an update, I brought my Mac in for service on the 8th February at the Apple Store Bullring – and oddly, it worked perfectly in the Store. However, I showed them this thread and the pictures they had – and they replaced the logic board and apparently it's one of the costliest parts ever possible to place, shockingly expensive that it's like the cost of a new laptop! However as it's under AppleCare (well, higher education parts and labour warranty) it was covered. Phew!
I got my Mac back today, and so far, it appears to be working perfectly (though as the graphic problems were intermittent, I'm making sure I do backups!), and fingers crossed, I should now have a working Mac once again!
Message was edited by: mintchocicecream

Moved Graphics Don't Display In Flash Output

Following on from my previous post (re the problems I have
had following an upgrade from v4 to v6) in which I mentioned that
many of my graphics do not display in preview mode, even having
moved the project to my C drive and even though the images do
display in compiled .chm output, they still will not display in
preview mode or in compiled Flash output (have not yet tested
WebHelp).
However, this does not apply to all of the graphics in my
project - It would appear that the problem images are only those
which having opened the project in v6, I moved into a central
graphics folder (using the Project view).
Beforehand, all my images were scattered throughout the
project folders which made it a nightmare to manage so I decided to
move those which were not already located in my 'Images' folder,
into it!
Although the file moves seemed to work without any problems
and the code in the 'True Code' view points to the correct location
(and does not show any obvious differences between graphics which
do display in preview mode and those which don't) - all I get is a
box the size and shape of the graphic containing a small red cross!
Any suggstions gratefully received as always.
Ta much

In dealing with the various problems, did you take a copy of
the project and then open that using the HHP file after deleting
the CPD and XPJ files? Try that on a copy to see if it fixes the
problem. If it does, read my topic on Opening a Project to see if
any of the issues concern your project.
If that doesn't fix it, post back.

Colour Band in RAW display

AMD ATHLON +5200 64 x 2 Processor
2Gb Memory
Radeon 1600 Graphics card
Catylist Software Suite 8.2
LG L1710B and EIZO GE210 Monitors
XP Professional
CS3 Extended 10.0.1
Camera Raw 4.3.1
Color Management active
When Camera Raw screen displays in full screen mode on the CE210 monitor (21" wide screen), a vertical bar is visible (very slight) on the right hand edge of the picture frame - very slightly darker (or browner) than the image. When the image is switched to zoom mode, the colour band remains on the right side of the picture frame, but as the picture reduces in size, the band remains static in the frame area, visible against the grey background. This suggests it is a part of the display area, and not part of the image. If the complete desktop area is reduced in width, the band becomes narrower, and may move out of frame.
Picture content needs to have plain colours - say sky or sea, of pale colour for the band to be visible.
If the desktop is drawn over to the other monitor, the band will most likely remain, but by "jiggling" the image a few times left-right, it may cause the band to disappear. However, immediately the desktop is drawn over to the main monitor, the band reappears.
If color management is disabled on the L1710B monitor, the band most often disappears.
Images whether originating from my camera, or sourced on line produce the same result.
When the image is displayed within Photoshop, this band does not appear - all is normal.
I use other software to display and adjust raw files, and images are perfectly normal under this software.
My current analysis is that the problem is Photoshop Camera Raw and/or Graphics controller, or interaction of these, quite possibly associated by the processing of the colour management information file(s)..... where do I go from here?
I believe I have fully uninstalled all Catylist files prior to updating to new version. As I am currently learning Photoshop, I am unable to identify if this is a new / recent problem, or if it has occurred following any software / driver update.
Any guidance will be appreciated.

Corrupt or otherwise bad display profile or bad VRAM would be my guess...

Iphoto 6.0.6 bug? raw displays banding

Last night I imported a couple CF cards into iphoto that I took on my canon 20d and they display all funkay!
the image is covered with black and magenta horizontal stripes, and green ones too.
but wait! That's not all. it gets better. When I click in the image the colors change. sometimes more of the image gets colors on it. BUT! other times the image will go back to normal. how is that for Funky?!
this is iphoto 6.0.6 and osx 10.4.10. None of my previous RAW images were affected (those that I imported using iphoto 6.0.4). all of my images are canon RAW (cr2).
Has anyone seen or heard of this problem? or know how to revert back to iphoto 6.0.5?
thanks,
doug

do you still have the images on your cf card?
try re-importing one of the cards and see what happens.
sounds weird... also try importing with the canon software instead of iphoto and let me know how you get on

My next iMac-- which graphics card; which display size?

Hi all,
I'd like some advice in choosing my next iMac, specifically regarding the graphics card and the display size.
Graphics Card:
I'm not a gamer nor am I doing any 3D animation. Is there any other reason to upgrade the graphics card? I DO want the best possible video playback (QT movies), but I don't know if the graphics card has any bearing on video playback quality.
Display size:
Aside from the obvious differences in resolution, do any of the three displays sizes (17,20,24) have any history of being better or more reliable?
Thanks in advance for any tips

Your needs will better dictate which model is best.
Video playback of QuickTine movies will not be affected by upgrading to the 24" with the nVidia chip.
No 3D gaming or animation means no need for a higher end graphics card. In my case, the x1600 ATi in the original Core Duo 20" is more than sufficient for everything I've thrown at it so far including full resolution "Call of Duty".
For your use, you may not need the extra VRAM but I personally would bump it up to 256MB though. Adding an external monitor will split the total VRAM between the two monitors and with Apple continually moving a lot of Mac OS X's graphical features to the GPU, the extra memory may be a blessing.
Display Size:
I believe that reliability between the three models is pretty much the same.
The advantage to the 24" is, of course, the extra screen real estate and resolution. However The price difference between the 20" and 24" could allow you to go with the 20" model and add an external LCD for a dual screen setup (if space permits).
Weigh your needs - now and the immediate future - and then look at both models in person if possible.

FCP 7 Multiple Graphics Cards & 3 Displays

With FCP 7 (Studio 3) has Apple fixed the issue that you can't have multiple graphics cards and more than 2 displays as was the problem with prior versions?

I did the typical; post a question then play around with the problem routine here.
I've found a solution where i put the "playout monitor" on the same card as screen 1. move screen 2 to another card and make the relevant adjustments to the displays arrangement panel so everything is the same layout as before. FCP now plays out to the correct monitor it seems it can't handle sending to other cards.
i'm running 10.5.8 and FCP 6.0.6

All graphics do not display correctly/patchy

When I run SQL Developer all th graphics for the buttons do not display. I get patchy buttons and lines though the screen. Any options I can set to stop this from happening?
Ken

Is this a fresh install?
What OS?
What version of SQL Dev?
What version of Java?
Do you run dual monitors? If so, does this problem occur on both?
Message was edited by:
EricH

Broken Graphics card Target Display mode

I have a 2009 iMac that now has a faulty graphics card, the computer crashes once photoshop runs.
I don't have the mac at the moment to test, but could I still get target display mode to work?
How well does the mac need to run before TDM can work?. If I power it up, sometimes it won't get any further than the apple logo, can it work then?
Thanks
Matt

I purchased a Belkin AV360 and it did not work with Target Display Mode on my new mid 2011 iMac.
After a bit of searching on why it didn't work I've found all sorts of articles on this issue with older display port devices not working with target display mode on the new Thunderbolt macs. I sure hope this can be resolved with a firmware update, or by someone (Belkin/Kanex) making a new Thunderbolt compatible adapter.
And I don't know if anyone has confirmed it yet since the feature is so hard to take advantage of now, but I'm hoping this years iMac at least accepts 1080P signals in addition to 720P and the native panel resolution. It would be worth the wait for an adapter if it accepts 1080P as well, which would make it at least more future proof since everything has gone to 1080P so rapidly.
I was really counting on my new iMac doubling as a TV/Console display in my room - it was part of what justified the high price of the investment and the convenience of the all-in-one design. I would be very pleased if Apple can help resolve this.

Older version of graphical modeller is displayed ;Not able to view all customers

Hi Folks,
Currently I am trying to perform segmentation in web ui screen(SAP CRM 7.0 EHP3). Whenever I click on Graphical modeller I get the following Java error.
Java version currently being used is 1.6.0_06
Java Plug-in 1.6.0_06
Using JRE version 1.6.0_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\jayalakshmii
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
p:   reload proxy configuration
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
and after that an older version of segmentation appears as below:
I am not able to see "All customers" in the staging area of graphical modeller.I posted a question about this earlier but could not get any reply till now.Please reply and help me in resolving this.Any help is highly appreciated.
Regards
Jaya

Atul --
What do you see? Are there any error message, either when executing the script, or when opening/browsing the connection?
(Please contact me directly at [email protected] or repost this on the JDev forum, as the JDeveloper team doesn't monitor this forum).
-- Brian (JDev Team)

Altered graphics don't display properly

I am running Lookout 6.2 on a small panel pc.
I am using custom graphics which up to now display properly. I needed to make a couple of changes to the graphic, which was done on another computer then the exiting graphic was replaced with the new one, using the same name.
Lookout displays the graphic but with messed up colour (greens are reduced to shades of grey) and the image is fuzzy. Untouched graphics remain ok
Solved!
Go to Solution.

Thanks Ryan
The resolution and colour were all correct, so I had the graphic re-drafted and this time it worked.
Yet another mystery

Graphics card issue/display resolution with 30" display

I've got a PowerMac G5 with a ATI Radeon 9800TX graphics card. I recently bought a 30" Apply Cinema Display but I can't get the display resolution on the computer to go any higher than 1280x800. I've read through some of the other postings and tired moving the cable from one DVI port to the other but that didn't work. If I don't get this thing working properly soon...Apple is going to get this monitor back.

I bought the ATI Radeon 9600 Pro Mac Edition
Do you mean the PC & MAC Edition?
Sometimes if I reboot it several times it works. When it works it's great resolution. The problem is every time you power down it's a battle for the computer to boot up. So, I took the card out until I can figure out why it's causing problems during start up. I followed the instructions to the letter when installing the card. First the software, then remove/replace the card.
Any suggestions as to why the computer sometimes boots up and other times not?
Probably a bad graphics card. Some versions of that card had that problem with some G4s, but worked with G5s. Maybe the current version fails on both G4s and G5s.

Slides with graphics slow to display

In CP7 I have multiple choice questions slides with graphics in it, when I move to the next slide there is a hesitation of several seconds before the next slide is displayed. On slides with NO graphics the next slide is displayed almost instantaneously. Any help?

It could be the quiz timeline that is causing the delay.
Quiz slides pause on enter, once you 'click anywhere or press y to continue' (after feedback caption if you have one) captivate unpauses the slide and contunues playing the timeline, then changes slide.
Example:
If the quiz slide length is 10 seconds and is set to pause at 2secs, and your image is displayed for 10 secs in your timeline, when you 'click or press y to continue', captivate will play the remaining 8 seconds and then change slide.
So make sure that your quiz slide pause, and your image is the same length. (or alternatively set the slide to something like 3 secs and make sure you set to pause after 2.9 secs, that way it will change straight away once you click to continue)
E.g. make sure its like this:

Graphical vs Raw Display

Similar Messages

Maybe you are looking for