Graphics appear as empty boxes on newly created email

Thunderbird has suddenly stopped the once working ability to embed (or inline-ing in the Thunderbird help systems words) small graphics files. Both BMP and JPG inline images appear as an empty box, especially in Replies, but also in new emails. The image appears correctly sometimes in New emails I create, but upon receiving that email, the empty box appears instead.
Each time I try to embed the photo, the ‘Image Properties’ dialog does display the selected image in the ‘Image Preview’ area, 361 width, 77 Height – the bmp is only 82k, the jpg 9k in size.

On what operating system are you getting this problem ?
And also, i hope you are using the last stable version ?

Similar Messages

CS6 Photoshop: One newly-created PSD filewon't print because the print dialog box won't appear altho the file properties appear to be the same as other files that do print.

CS6 Photoshop: One newly-created PSD file won't print because the print dialog box won't appear after selecting File > Print. Then "Print" becomes grayed out. The file properties such as permissions, are the same as other PSD files that do print. This file also cannot be converted to Adobe PDF, which is not offered as choice under "Save as", whereas other can be. I've exited, reopened Photoshop, restarted computer, checked out other CS6 PSD files which do print, nothing changes. The 52 MB file has been flattened. OS is Windows 7. Thanks for any suggestions.

Sounds like the printer driver is having some problems.
Try holding the space bar down when you select Print (which makes the print dialog NOT load previously used settings).

I'm trying to set up a signature on my email account. The signature appears on the screen when I'm creating an email, but does'nt appear on the email to the person I've sent it to. All it shows is an empty box... Please help! xoxo

I'm trying to set up a signature on my email account. The signature appears on the screen when I'm creating an email, but does'nt appear on the email to the person I've sent it to. All it shows is an empty box... Please help! xoxo

I did use that functionality. I am looking at this thread now on my iPhone and I see the images just fine!

Newly created sub-folder does not appear in correct location

Hello, When I attempt to create a sub-folder in Finder the newly created folder is located at the bottom of the Documents drive and not within the folder I'd originally selected, eg:
1) viewing the Finder in List view, selected a folder in the Documents Drive, eg DOCUMENTS / WORK
2) from the "Action" button at the top of the Finder page I've selected "new folder" option
3) A new folder has been created but it's placed at the bottom of the Documents drive, eg DOCUMENTS / UNTITLED FOLDER
I've attempted this a number of times and always with the same results, is this bug occurring for all 10.5 users? I hope not because this is a shocker.
Any advise or suggestions would be greatly appreciated.

This appears to be a design decision, as when you're in list view, the current folder is the one displayed in the window. If you want it to work the way you think it should, use column view.
(35826)

I cannot get rapidweaver5 to upload my newly created website. It keeps giving me the same error message "*** -[NSFileManager fileSystemRepresentationWithPath:]: nil or empty path argument"... Can someone tell me why?

I cannot get my newly created site to upload using rapidweaver5. I keep getting the following message...
*** -[NSFileManager fileSystemRepresentationWithPath:]: nil or empty path argument
I have checked the info in the bookmark info to be correct so I cannot understand why this is not working
Dave

I cannot get my newly created site to upload using rapidweaver5. I keep getting the following message...
*** -[NSFileManager fileSystemRepresentationWithPath:]: nil or empty path argument
I have checked the info in the bookmark info to be correct so I cannot understand why this is not working
Dave

Create empty box in Messaging Mapping

Hi All,
Is it possible to create empty box in messagin mapping - data flow editor ?
If yes, how it can be created ?
Regards,
ss

SS,
What do u mean by an empty box?
If i understood it right, map the source to a constant and give the value as single space.
reg,

Arabic characters appear as empty squares when using certain HTML tags or font styles

Only when HW acceleration is on. Arabic characters appear as empty squares when using "italic" or "oblique" font styles or when using or html tags.
Try this code to replicate the problem
<pre>
مشكلة ظهور المربعات الخالية بدل الحروف
Italic مشكلة ظهور المربعات الخالية بدل الحروف
Oblique مشكلة ظهور المربعات الخالية بدل الحروف
i tag مشكلة ظهور المربعات الخالية بدل الحروف 
em tag مشكلة ظهور المربعات الخالية بدل الحروف 
</pre>

After lots of research, I found the problem. The boxes (squares) show up whenever there is a font in the webpage that does not have Arabic within its Unicode range such as Times New Roman Italic or Oblique. Normally, Firefox will pick another font to display the characters but now, a newly introduced feature is interfering.
To fix the problem without turning off hardware acceleration.
Go to about:config
locate: gfx.font_rendering.directwrite.use_gdi_table_loading
which is True by default in FF4.0 Beta 10, and change it to False.
This is a bug that has to be fixed.

Can I use Solution Builder on newly created Client?

Dear Experts,
I have an existing SAP system and I created new client via SCC4 without doing any client copy (means it's blank).
Can I logon to the newly created client via SAP* (since there's no other user id) and run Solution Builder to activate those SAP best practices Building Block? Will that affect other existing client (what I mean, will there be a cross-client customizing?
regards,
Abraham

Hi Abraham,
Can I logon to the newly created client via SAP* (since there's no other user id) and run Solution Builder to activate those SAP best practices Building Block? Will that affect other existing client (what I mean, will there be a cross-client customizing?
Yes, You can login to newly created client via SAP*. However, running or activation on empty client is not advisable.
Please copy the Newly created client from 000 or 001 and start the activation.
Refer to below link for SAP best practices Activation.
http://help.sap.com/saap/sap_bp/HCM_ERP605_US/html/installation_page_EN_US.htm
IMPLEMENT - Solution Builder Simplified path to activate SAP Best Practices.
Graphical scenario selection; Standard scope templates
http://help.sap.com/bp_dm603/BBlibrary/General/SAP_Best_Practices_overview_EN.ppt
Regards,
Sravanthi

Download assistant \\ Adobe Premiere \\ why nothing appears in dialog box?

Why nothing appears in dialog box while using Adobe Download Assitant & already logged in.
I chose "video" products but it keeps being empty.

It might be because your machine does not meet the requirements. Check out the following and see if your machine meets the specs...
Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html

How to cause a form to reload with a newly created record?

I hope this is easy and I'm just missing it.
I have a form based on a table (a "parent" table.). The parent table uses a trigger to generate the PK.
When a new parent record is created with the form, I want the page to reload with the newly created record still in the form. Then some conditional regions based upon child-tables would appear, with options to populate the detail records.
My problem is simple: how can I access the value of the primary key of the newly created record once it is submitted to the database, so I can use it to reload that record into the form?
Thanks very much for your help!

John - The DML process (Automatic Row Processing) has a Return Key Into Item option. That's what you need.
Scott

How can I protect formulae in a newly created spreadsheet without locking the whole sheet ?

How can I protect formulae from being overwritten on a newly created spreadsheet without locking the whole sheet ?

Olly,
I'll be picky here on nomenclature ;-)
Tables and other Obects can be locked, but Sheets can't be locked.
If you wish to shield some parts of your content from accidental modification, arrange your layout to put that sensitive content in tables separate from the tables that need to be accessed, and lock the sensitive ones. It's also possible, but rather clunky, to place shields over the sensitive area. A shield can be made by Inserting a Shape and positioning the shape over the sensitive area. With the shape selected, go to the Graphics Inpector and set the Opacity of the shape to zero. You will then be able to see through the shape but will no be able to Click through it to get at the cells below. This method is inconvenient because you have to worry about keeping the shape aligned with the table should the table need to change size or shape.
Jerry

JSC doesn't show newly created extended DataProviders

Hi,
I've been using JSC and Hibernate for a project.
According to Sun's how to using Hibernate + JSC (developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/hibernate.html) , I've created a wrapper class which extends ObjectListDataProvider, but instead of creating the property on the SessionBean, I did it on the PageBean.
The problem is that everytime I need to add another property to a page bean using one of my wrapper classes (extending ObjectListDataProvider), after following the how to instructions (compile the project, close and reopen), it doesn't appear as a property in the Outline panel.
After a while building, cleaning, etc. I managed to get it done in one page, but on newly created pages, the property doesn't appear on the panel.
Any ideas?
P.S.: If I instantiate a ObjectListDataProvider property, it's shown correctly.
Regards,
Leonardo Eloy

IMAP issue... fixed now.

Can't See My Pictures--Just Empty Boxes

I just did a download of new pics from my camera to iPhoto. Somehow during the download I can't see my pictures in my library or in my albums. Just empty boxes show up. The count of the number of pics is accurate for both the albums and the library.
I restarted my computer, and rebooted with no luck.
I did a reboot holding down the "apple" and the "alt" key, and followed instructions, and still no pictures.
Any ideas of what I can do?
Danny
[email protected]

Danny:
Welcome to the Apple Discussions. What do you see in the library, empty thumbnail spaces or empty edit windows? Is it all the photos or just some? Check in the Originals folder to make sure you have the full sized image files in the subfolders. They should all be there. Also do you have folder in the iPhoto Library folder titled "Recent Imports" or something like that?
Do you have a backup copy of the iPhoto Library folder or the iPhoto library database file, Library6.iPhoto?
If not and since you've tried rebuilding the library with no success you're going to have to start with a new library and import the image files from the Originals folder of the current library. Here's how:
Creating a new library while preserving the rolls from the original.
Move the existing library folder to the desktop.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the desktop into the open iPhoto window.
This will create a new library with the same rolls as the original library. However dates on the rolls may be different but can be edited as you would the roll title.
Once this is completed you can delete the Originals folder from the desktop and the iPhoto Llibrary folder. If desired, you can keep the older library folder to try other fixes on it.
In the future I recommend you make a backup copy of the Library6.iPhoto file after each import and after doing a lot of editing and organizing in the library. Then if you experience a similar crash all you need to do is replace the damaged database file with the backup copy and you'll be back to the same place in the library as when you make the backup. See the tip at the end of my signature.
If you have a recent backup copy of the library post back and we can go from there.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Empty box received from Verizon via FedEx

On March 16, 2015 I ordered an upgrade to my cell phone. The new phone was sent via FedEx and was delivered on 3/20. Upon opening the package, there was no cell phone in the box. The box had appeared sealed and we had no reason to suspect any it might be empty. Checking on the internet I found out that this has happened to a lot of others. If you google “Verizon empty box delivery” you will see that this has happened many times to other people. I am beginning to believe that either Verizon or FedEx is running a scam to steal phones at the customers expense.
We immediately contacted FedEx and Verizon and informed them of the mission phone. When you call them you get a different customer service representative (CSR) every time you call. Both FedEx assured they would investigate the missing phone. After repeated calls to FedEx and Verizon , we were assured there would be an investigation and they would call me. The last Verizon CSR I talked to said the investigation would take 2 weeks. I waited the 2 weeks and heard nothing from them. It seems I am getting the run around by both FedEx and Verizon. The CSR’s that come on the line when we call is always a different one, if fact they are located in different parts of the country. We never get to talk to anyone in authority that might be able to resolve this issue.
To add insult to injury, Verizon has informed me that they will be charging me $299 for not returning the old phone the stolen one was to replace.
Can anyone help me?

In situations like this an empty box could have been sent by verizon. On the box label look to see if the weight is listed.
In most situations a call to verizon informing them that the box was empty will have them deal with the carrier.
Once a package is signed for it releases verizon and you could try and get a claim in from FedEx but that is iffy.
Now you have a choice, call your bank or credit card company and have them reverse the payment you made to verizon.
After this is done contact them and inform that you reversed the charge because verizon sent an empty box, or the device was stolen in transit. Please tell them that your child who hopefully is not age 18 or older cannot sign for a package due to not of the age where it states on the label, "Adult Signature Only" FedEx violated their own policy.
When on the phone with verizon tell them to send you another phone.
You can also take verizon and FedEx to small claims court to have your phone. Or compensation of some degree.
Good Luck

Why can I not see any newly created 'Groups' in 'Work Group Manager' on the client Mac at login?

Hi. Now, this issue has not been resolved since 10.6 Server. I have now upgraded to Mountain Lion and the issue still persists. I used to easily create Workgroups/Groups in 'WGM' and they would appear at login for those users who were part of that group. As it stands the old created groups appear ok and can be accessed selected at the point of logging in. The newly created groups don't show up at all. They all look good to go when looking at WGM. I have tried removing the Users from the groups and adding them again but there is no change. It is getting me so frustrated!
Why is this happening? Is there a quick fix for this?
Any help will be gratefully appreciated.

Hi. Now thats a hard one to pin point exactly. I guess you mean Archiving the OD and exporting users and groups etc Yes this happened when we upgraded from 10.5.8 Server to 10.6 Server.
How do I go about fixing this in Mac OS X Server 10.8.4? Do I have to go through all that again? Will I lose any settings in doing so?
Thanks in advance.

Graphics appear as empty boxes on newly created email

Similar Messages

Maybe you are looking for